Not doing much right now other than waiting for harvest. Colas keep getting fatter and fatter.

Cant wait till flush to see em purp OUT OR BLACK OUT 💜🖤🎩🌈🍬

Growing well this week!

The "Rain, Regrets & Resilience" Grow Log – CW 34 (August 21, 2026) 🌧️? Main Stage: Flower Tent (Week 6 / Day 42) 🎪✨ Genetics & Reifestatus: High Society and Zupernova are rounding third base in Week 6. The frost is getting downright aggressive—trichomes are looking like a fresh layer of morning snow, and those pistils are turning a nice, crisp orange-brown. Most trichomes are milky, with just a few clear ones holding out. Canopy & The Great Flush: Thanks to an accidental "extreme flush" courtesy of a moody irrigation controller, the substrate is stripped clean of salts (soil EC sitting at a squeaky 0.09 – 0.10 mS/cm). The upper fan leaves are showing that glorious autumn fade as the plants eat their own reserves. From Week 7 onward, it’s pure, pH-adjusted water all the way to the finish line! Climate vs. The Weather: Summer decided to rain on my parade—literally. High outdoor humidity means running everything on max gets me a 64% RH peak in the tent, though it normally drops to a comfortable 52% on better days. Temps are rock solid between 24.5 °C and 26.6 °C (VPD ranging from 0.9 to 1.4 kPa). Airflow Defense: Both oscillation fans are screaming on high. The lower one is blowing diagonally up through the jungle, while the top one is giving the main colas a steady breeze. No bud rot allowed on my watch! Genetics Vault & Side Projects 🌱 Zupernova (The Absolute Unit): After getting a haircut last week, the mother sitting outside the tent bounced back like a champion. She transformed into a wide, bushy canopy of prospective clones. (Friendly reminder: this strain yielded a wild ~210g dry off a single plant last run!). High Society (The Sensitive Princess): Chilling under a heavily dimmed LED (15%) in "survival mode." Since this strain throws a fit and locks out at the mere thought of excess salts, she’s keeping a low profile as a backup genetic until I give her a light haircut. The Melon Experiment: Scraped some honeydew melon seeds yesterday and set them up under a glass dome on wet paper towels in the nursery tent. With the dark mat and light heat, it’s a cozy 25–26 °C in there—let's see who sprouts first! Outdoor Evictions: 4 citrus trees have officially been booted out to the garden to soak up real sunlight. The Houseplants: Washingtonia palms, Lemon Eucalyptus, and Coffea arabica are all coasting along fine. Hardware Tech Support 🛠️🤖 AC-10 Controller Saga: Spider Farmer support finally hit me back. The game plan for this weekend is a full factory reset and re-syncing the app to cure its sudden overwatering fetish. If it keeps acting up, it's getting shipped back! Next Up: Waiting for the pots to dry out, taming the controller, and watching those trichomes like a hawk for harvest day.

trimmed and netted the plants last night, 12/30, and the energy pushed the plants to stretch another 1/2 inch+ this will be the last week of vegetation as I prep this light leaking tent for flower, not a fan of mars hydro at all right now. their poles are the weakest I've encountered yet, too many light leaks and this is the first grow with it. My high cfm fan , which is only a 4", is pulling the fabric too much and causing the leaks to grow a bit. This is not new, its been happening with indoor tents for a while now but I thought a grow company such as MH would have a decent, respectable tent. My solution is Blackout Curtains draped over the sides. However, I am hesitant to do this with the MH tent as the poles for the tent are too weak as it is, tsk tsk tsk mars hydro. will continue to increase the watts the next 6 days HAPPY NEW YEAR a combination of light and fresh soil has made the plants stretch so I will finish tightening up the MH tent today and ill start flower tomorrow, day 62. while adjusting the height I must have nudged the dial for the dimmer and sent it to 184w. this would have been a big jump but manageable but I lowered the light 7" and the plants took a bit of a hit. I adjusted the light back down to 160w and I'll let the plants recover before anymore adjustments.

Buenas a tod@s!, bueno novena semana de flora de estás green poison, seguramente ante última o última semana, les falta nada... La plata está hermosa, más allá de sus hojas marchitas tiene unos frutos super pretos, compactos, pesados y mucha resina... Tanbien ultima semana de nutientes. Aclarando q es mi segundo armario, y sigo teniendo algunos problemas q mejorar, siempre trabajando humildemente, planta humilde y muy hermosas, no tengo experiencia, escucho todas las opiniones, pero eso no me define, me encantan mis plantas y cada día trabajando para q sean mejor.. falta muy poco... Un saludo y buenos humos para tod@s!!! 💨💨🔥😎⚕️💪🏻 🇦🇷🤝🏻🇪🇦

1/20/2023- So much to do pre grow and over the next 16 days, absolute first order of business is that I have to take down my current Grow---TIMBER-- Then I have a list of things I have to get done in order to be ready to start this grow 1 Feb. With that said T - 2 days until start 48 hour Flush T - 2 days until Start 48 hours of Light T - 4 days until TIMBER!!! Items that need to be done before 1 Feb 2023 1. I need to clean the tent out 2. I need to clean the equipment- Proper Sanitization between grows in Hydro is a must!!! 3. I need to get the hole in the ceiling above my tent repaired- For my last grow I had a deep sink installed in my grow room, to make Hydroponics a little bit easier and have a water source in the same room. The seals on the pipes they were installing broke and leaked through the ceiling causing some damage all the way across my grow room, I was already weeks into my grow and couldn't risk them working above my tent and it would have been very awkward positon for them to be working in as well, so have to get this done quickly between chop and germination. 4. I have to install my new light- I was using a Vivosun 4000 and for this grow I am switching up to a Spider-farmer SF 7000. 1/20/23- For this upcoming grow I am working with M/F photo seeds so I ordered 4 Sex determination kits. I recieved my my 4 Sex determination testing kits from Rimrock Analytics today. I will be using these to test my plants at week 2 of Veg so that when/if I take clones I know I am taking them off females. As well as I don't want to accidently pollinate my tent during this grow I am looking for big beautiful buds not seeded buds. :-) 1/24/2023- Harvest of current grow- Started at 2:00pm and finshed wet trim and firt batch into the freeze dryer. 1/25/2023- Next batch into the freeze dryer and cleaning all my equipment for this Grow. T-1 Day until the workers are supposed to be here to fix the hole in the Grow Room. T-3 days until I instll my new Gorilla Grow Tent and my New Light Spider Farmer SE-7000 for this grow. T-7 Days until Start of Germination 1/26/2023- Harvest is done ran through the Freeze dryer and dry tim completed. 1/27/2023- Grow Room repairs completed. Hole is gone Letting the paint dry before I install the new tent. T-2 days until Install the New Gorilla Grow tent and the new Light T-3 days until I put the hydro equipment in the new tent T-5 days until Germination 1/29/2023- Day 0- Final Pre Germination activities Germination Start T-3 days The paint on the ceiling was dry and it was time to finish prepping for Germination. I got the following items knocked off my list. New 4X4 Gorilla Grow Tent is up and ready New Spider Farmer SE-7000 Light is installed- Thanks Moony Grows for the suggestion and for the Code that got me some money off and free shipping (Moonygrows)!! I turned the lights all the way up to max and set the timer to 18/6 0600-0000. I will keep an eye on the temperature and humidity without my plants and see how hot it gets with the new light. I put my Hydro system back together and put in 40 gallons of water into it, time to monitor for leaks the next few days. I Setup my cloning machine for Germination Days 3-11 1/30/2023 let me break down the situation, ROOM in the TENT.. Enough said.. No really I tried putting my exhaust system up in the new tent with my new light, The light is so big corner to corner that it really didn't give me enough room for the lights be be raised, with the exahust hanging the buckets my plants are Starting in are 2 and 1/2 feet off the ground, great for plenty of room for roots but not so great for upwards space for the plant to grow. In a 6' 11 tent with the exauhst in side and hanging that only gave me a little over 4 feet of grow room to play with. My last grow if you saw my diary, anyone could tell I was struggling to keep the buds off the lights. No good, Since space was such an issue I was running my carbon filter inside on the ground but It really needed to be up sucking the heat out not shooting the cool out. With that setup I was sucking air through the filter and pushing it out the tent at a bottom exhaust hole cold out. Wasn't doing me any good for my heat. I was hitting temps of up to 85 degrees. I bought a portable AC unit and have been running it in the grow room to try and keep temps below 85 and I have had to lower the power on my lights during grow also not ideal.. With that said a friend of mine MoonyGrows (Check out his diary) took the time to look at my issue send me a picture of my grow tent setup with detailed instructions on how to suck the air out from the top but putting my filter and fan on top of my tent so no room issue and I am sucking the air out from the top where the heat is instead of pushing the air out from the bottom where the cool is... THANK YOU MoonyGrows For taking the time to help me get this straightened out.. Now I have room and I have the exhausts working right and now my temps with everything at 100% are topping out at 80 this dropped the temp by 5 + degrees at 100% max. T-2 days until Start of Germination Prepped my seed tray with humidity dome Prepped my Rapid Rooter plugs. I Used RO water, and I added a few drops of Hydrogen peroxide to Oxygenate the water. I then PH balanced between 5.7-6.0 the same that they will be getting in the Cloning Machine and when they get to thier final grow pod. I perfere the 5.8x range and I hit 5.84 for these rapid rooters. If you want to see a complete video on the process HowWeedGrow has an amzing video that shows step by step how to do it and explains it better than I ever could including how to plant the seeds. Which I will cover when I get to that step on Wed. https://www.howweedgrow.com/how-germinate-weed-seeds-cannabis-rapid-rooters/ 1/31/2023 T-1 day until Germination Start All set and ready have my Rapid Rooter plugs ready to go have my seeds out.. Have my seed tray warming up tonight. Tomorrow morning right into the Rapid Rooter then strait into the tray. I will spray the dome to start the humidity in there. 2/1/2023 Germination Day!! Let the games begin! 0600am Put the seeds into the Root Riots. And then put the seeded Root Riots into their first home the Seed tray. I have them under the light 24/7. Sprayed the dome 7:30pm Sprayed the Dome to keep humidity going on the dome. 2/2/2023 Day 1 of Germination Sprayed the Dome in the morning Sprayed the Dome in the evening 2/3/2023 Day 2 of Germination Roots are starting to come out the bottom of the root riot plugs and the heads are slowly popping out of Number 4 just below the surface. Afternoon- Number 4 has popped up Evening- Number 3 has popped up as well. Happy Dance!! 2/4/2023 Day 3 - Germination Surprise Surprise Surprise- all 4 have now poked their heads up.. Happy day!! 100% Germination succeeded. Now major milestone to track is how many are female and how many are male. I will take look at the roots this afternoon/evening and see if they have enough root to go into the cloning machine for the next 7 days before they go into their Hydro Pods. Day 3 - Germination - Evening.. Roots looked good and they were tall enough to make it into the cloning machine. Now that they are all in the cloning machine I have switched the lighting to veg state 18 on 6 off. 2/5/2023 Day 4 - Germination - Morning All the Ladies (fingers crossed) looking great stretching nicely and look nice and green, Photo synthesis underway.... UPDATE!! After a very interesting POD cast on FSTS by Dr. Bruce Bugsbee from Utah University, I have shifted my lighting to 24 hours on through seedling and then I am going to shift to 20 hours on the rest of Veg. 2/6/2023 Day 5 - Germination While Checking on my conditions inside the new tent last night, I found that the Humidity was down to 39 Percent. I added an AquaOasis Cool Mist Humidifier, the reason I selected this humidifier is that I needed one that could be turned on and off utilizing my Inkbird Humidity Controller IHC200 that I have my Pro Breeze Dehumidifier currently running with. Root structures are starting to get there about 1/4 of an inch. 2/7/2023 Day 6 - Germination Everything seems on track more roots poking out of each today. They are each getting a little taller as well. Checked in the evening and number 3 was drooping the Root riot plug on the bottome was dry and the roots were not in the water yet. I raised the water just enough that the longest root that was sticking out is now hitting the water. 2/8/2023 Day 7 - Germination Everything looked good while checking in on them this morning number 3 is now full up and no droop again. 2/9/2023 Day 8 - Germination T-2 days until Plant into Forever Pods and we start week 1 of Veg .. :-) Surprising thing to me is that number 1 and 2 were later in popping then 3 and 4 but the roots are growing longer in 1 and 2. 2/10/2023 Day 9 - Germination Number 1 and Number 2 are definitely ready for transplant today.. Based on how they were yesterday and where they are today I am hoping by tomorrow 3 and 4 are ready. Today they look to me where 1 and 2 did yesterday.. I really hope 3 and 4 catch up by tomorrow since.. T-1 day until transplant to new/ final home for grow. Need the roots long enough to have some clay down in the basket to keep the root riot out of the water and only roots in the water.. 2/11/2023 Day 10 - Germination Today they got placed in thier forever Home, 7 days from Sprout and 7 days until Week 1 Start. PPM- 180 this is water out of the Tap Temp Water: 70.7 Temp Tent: 77 Humidity: 40% I have a humidifier going 24/7 to try and bring this up.. I also have Humidity Domes on each plant. 2/12/2023 Day 11 - Germination Sprayed the domes, all are looking good.. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-6 days until Week 1 start 2/13/2023 Day 12 - Germination Sprayed the domes, They were looking a little yellow today so I moved the light down to assist. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-5 days until Week 1 start 2/14/2023 Day 13 - Germination Sprayed the domes, They were looking a little Florissant yellow today, with what looks like slight burn on the tips, I talked with a fellow grower and we agreed that It was probably that I was drowning them, Yes you can drown you plants even in Hydro, but only early on.. :-) It usually happens with the water being too high, which soaks not only the roots but the medium (root Riot plug in this case). I lowered the water from touching the bottom of the pot to about 1" away. This will probably take 3-4 days to resolve. I will continue my daily monitoring. T-4 days until Week 1 start 2/15/2023 Day 14 - Germination Sprayed the domes, continue my daily monitoring they look a little darker green instead of lime green now that I lowered the water levels in the system, so I think that I might have resolved the issue but it will take a few days for recovery to happen. T-3 days until Week 1 start 2/16/2023 Day 15 - Germination I looked in on them this morning, 3 and 4 look like they are doing well and recovering nicely. Number 1 not so much it has brown spots on the leaves, this very well can still be a side effect of the overwatering but I decide to go ahead and add Nutes earlier than I was planning just incase. I was going to wait until Saturday but I think intervention is necessary now especially after drowning them early on. I added 1/2 what I am planning on adding for week 1 start. I also think I am going to adjust my chart to add 1/2 2 days after plant from now on. I don't think it would hurt it to have some Nutes to pull from. .25ml/Gal Calmag = 12.5ml 1ml/gal GH FloraMicro= 50ml 1ml/gal GH FloraGro = 50ml 1ml/gal GH FloraBloom = 50ml T-2 days until Week 1 start = I will drain the system and start it over on Saturday with Week 1 Nutes. 2/17/2023 Day 16- Germination I didn't even want to post today after looking in on them this morning, 3 of the 4 are now showing signs of dronwing.. Brown spots on the leaves, the water levels were still too high.. I drained about another inch out of the tanks.. Will see how quick they recover.. I start week 1 tomorrow and will have to ensure my water levels are at least 1" away from the basket on this round.

I will try and update daily Germination requires 3 things - Darkness , Warmth , Water One thing i should mention - Growing autoflowers, is difficult to do well,why? because from the moment that seed sprouts, you have a finite amount of time before she is finished, so any fucking about with anything ( repotting,pests,nutrient issues) , will lower yield.You can sometimes get them finished in 10 weeks on 20/4 but unless you have a controlled environment its hard to go more than 18/6 without heat and humidity issues.Autoflower breeding has come a long way in the last 10 years,Fast Buds is one of the pioneers. Day 1 - Tuesday 16/10/18 Put into wet root it cubes , then into the net pots with the clay pebbles, then pots into my rooting dwc boxes , placed a dome over the top to increase the humidity . Day 2 - Weds , nothing happening yet ! Day 3 - Thursday , I think she has popped , not quite up yet , see pink picture Turned light on 17/7 , why ? because I think this is best @ 13-15,000 lux Bestva 800 (150 watt draw) Led approx £100 , I would buy the dimable cob version if you can .(900 or 1200) Day 4 - Friday , looks a little distorted , has she got three leaves ? night time took a pic on the G7 .... Day 5 - Saturday , definitely three leaves , might just be the first node , fingers crossed she will be fine , was quite worried she wouldn’t make it , gave her 20 ml of room temperature water , with a syringe onto the root it cube , Day 6 - Sunday , looking ok , nice and green , I’m hoping the roots will be into the reservoir by now , you have to love fast buds , the germination rates are almost 100% , I have included a picture with the rest of the pots , for reference , there is a gorilla glue and a tangiematic, two of my favourite Fast Buds strains , which I started around the same time , IMPORTANT- do no let the root it cubes dry out before the roots are into the reservoir , make sure the bottom of the net pot DOES NOT touch the water Day 7 - Monday , I checked the water level and the ph , it has lost a little due to evaporation , root is well into the reservoir , I will add some nutrients tomorrow, seed on top right has pushed up but no leaves, this is NOT a fast buds seed, just shows u,... i have also put more pebbles in to cover up the holes, it would be nice if they did a pot that didnt have holes all the way to the top !!! Building DWC - you can build a DWC quite easily , out of cheap items , the ones in this week , were made by a friend of mine (Kev) when he spotted the box at Poundland for £1 - all you need is a black plastic box ( black so no light penetrates the roots ) with a lid , a 127mm hole cutter , air pump with tube and air stone , 140mm net pots to go in holes , some clay pebbles , and root it cubes , I will make a little instructional video , the reason I put them in here is because I will transfer into my IWS oxypots , which are too big to go into the tent ,and as the led is better with small plants it’s much easier .

all in all it was a great run and im glad to have grew it and plan to grow it again in the future

Winter grow ❄️

The lady's are in a good mood😎

Das wird die letzte Vegi Woche sein ich denke mal in 2-3 Tagen schicke ich sie in die blüte. Heute habe ich nochmal ein wenig entlaubt und 2 CO² Bags rein gehangen. Sonst sehen sie sehr vital aus und freuen mich schon auf die blüte Das nächste mal werde ich erst in eine Woche düngen da sie ja erst in den Allmix gepflanzt wurden und alles noch satt grün ist👍 Über Tipps würde ich mich natürlich freuen🍀✌️

Elmer is looking good!! The FUDD!! And a dud LOL