Likes
9
Share
@mheat
Follow
She is so tall...cant raise my cob anymore! Lots of sites...smells stanky!! In a good way...sort of.
Processing
Likes
Comments
Share
estoy usando agua de osmosis para limpiar raices.
Likes
13
Share
Likes
3
Share
@StonyHemp
Follow
Week 4 and buds are beginning to fatten up nicely, I’ve changed the position of the gelato and one of the Zkittles to improve light penetration into the canopy as the leaves have began to defoliate themselves from the plants. This being said all plants are looking green and healthy and show minimum environment stress. Hopefully this change in the canopy will allow each of the strains to grow to their full potential with the limited space that I have.
Likes
16
Share
I was selected to test some of Fastbuds new genetics. Seeds germinated in 48hrs and 6 days later it broke ground and hasent slowed down. This grow is in my 4x4ft grow space located in an uninsulated shed. Each plant has a dedicated 150-200w LED from Viparspectra or Mars. Winter Temps in my area spike to -15C or more in Jan and Feb, so this will be an interesting and challenging grow. The grow room is 20-30C above ambient temperature, so there is a little manual and auto manipulation of grow Temps. See my video Lights 50-75%, 30 inches, 75-120w per plant Soil temp: 21-25C Light cycle: 5:1 Air temp: 18-27C
Likes
11
Share
@Hawkbo
Follow
This one got a late transplant it's only been in the new pot for 2 or 3 days, the other one is still in a solo cup I might put it in a 1 gallon bag as a back up but I'm tryin to keep it to 1 of each strain other than the gelato and lemon ak. They got moved into the 4x4 with the jimmy rigged 180w quantum board light built from ceiling tile grid. The tnb co2 is newish but I gotta get the heat up and bring in a more powerful light to take full advantage.
Likes
10
Share
Day 43 : Watering with co2 tab / 5L. Also added food again because i think they need it. Increased ppm to 850. Maybe the next one will be pure water. Ventilation works all the time when lights are on. Temp and humi are stable and this is good for the girls. Although she is indica, she still grows. 9 cm in 3 days. So i guess this is the reason her buds are a bit behind. Patience is the key always. Also removed some burned leaves from all ladies. Edit (Day 47) : Watering with co2 tab every 5L. I watered with juices again at 850ppm because i felt that they need it. Only WC drank pure water because of burns. She grow 13cm in 4 days. An indica pheno stretches like she is in preflowering stage. And this i think is happening. At start she took a lot of air and maybe she felt cold. So, now she started again to develop. I make a prediction that her buds will be really fat. She is very healthy and responses absolute perfect to the nutrient schedule.
Likes
1
Share
@Rogue2803
Follow
Última semana de fertilizado.
Likes
28
Share
@Brujha77
Follow
Beginn 4. Blütewoche Heute wurde nochmal entlaubt und es wurde einiges unten ausgeschnitten.. Da ich den Run mal wieder komplett waschen will, denke ich werd ich die 3. Nun so lassen. Mal schaun ob sie ins Zelt passen💪😏
Likes
198
Share
@DevilsBud
Follow
New week in supported marshydro grow FLOWERING TIME last run i did it under a TS-1000 But this time it will be under the amazing FC-4800 i am so excited to boost up everything and see what i can approve from last run 🤘🏻🤘🏻 Starting to put them in 12/12 schedule they have bin put in darkness for 12 hours and now hopefully let the flowering Begin fucking love this stage 🤘🏻😎🤘🏻 27/10/21 All plants Transplanted in 11L fabric pots added 5gram Easy Roots - Mycorrhiza Mix to soil Have some ideas for my grow tent I have my plants on hard plastic pallet And i ordered plateau with ball bearing So i can turn my plants around with one spin 😎 basically a huge turntable wikiwki Will be updated soon happy growings Growmies visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
5
Share
Blurple burnt leafs a bit this week and the next week but couldn’t see the damage under the Blurp until Back under one or my Mars lights (blurp ran a bit warm and intense for the 2x2 tent haha 😂 schoolboy error Lol 😂)
Likes
108
Share
What a beast she is 🤩🤩 She is getting really sticky and heavy now also smelling great😋 Starting to flush now🌊💦
Likes
1
Share
@renbuds
Follow
Week #11-July 27-Aug 2 8/2-The top colas are ready to be harvested. Lot of amber trichomes now and I'll cut those and then lower the lights to let the middle and lower buds get a bit more ripe.
Likes
12
Share
@ohcibi
Follow
Approaching the finish line. Fertilizer is now at its final dose. Both plants stopped growing now and started to build thick buds. Ken in fact is way ahead in terms of buds but it might be because he Hase a little bit less in number. It’s possible that I trained Ryu too much for his pot size 😆😆. But let’s see. Both looking very good and a lot more powerful than in my first grow. Water intake is still massive. The top soil is rock solid while draining water super fast which must mean the pots are filled with massive roots. The erected teeth came down a bit but they were never that severe in the first place so I’m still not worried about that. I skipped one day of watering to account for possible slight overfeeding but I mean, today’s watering then was with the increased dose of fert 😆😆. I know I’m pushing it a little bit but that’s deliberate. I have high demands both in mass and quality so my approach is riding the edge as good as possible from the beginning 😆
Likes
8
Share
Day 36- soil was dry so watered with 1 gal of r.o and 2.5 ml cal mag I tested the runoff at 6.2ph and ppm right at 800 going to give a very light dose of fox farm nutes next water Day 37 and 38- soil still moist just filling humidifier and keeping temps around 78f rh between 45-50% Day 39- soil was dry watered with 1 gallon r.o with 2.5 ml cal mag 3.0ml big bloom and 2.0 ml of grow big and tiger bloom the runoff tested at 6.1 ph and almost 1800 ppm not sure if I should flush the plant now. Ended up flushing a total of 2.5 gallons of r.o until the ppm reached just under 1100 now just hoping I didn’t burn her Day 40 and 41- soil still moist so just filling humidifier good news is she didn’t nute burn but my overreaction flush did cause some very minor nute deficiencies on some lower leaves going to feed nutes tomorrow and this time not flush even if Ppm number is high