Likes
3
Share
Empezamos el lavado de raíces ya. Parece que va a seguir engordando un poco. Muy buena estatura y buenos cogollos por estar en maceta de 5 litros. No se bien que genética es pero tiene mucho pino y limón. Estaré 7/10 días lavando raíces y a la poda. Ya les mandaré resultados gente. Gran abrazo
Likes
169
Share
⭐ TrolMaster tracking ⭐ I started to track my crop during week 15, when I got the Tent-X TCS-1 by TrolMaster. First impression was: this is too professional for me, I can't handle setting it up and using it well. Then I started reading some posts on Instagram, I visited their site and in 5 minutes my cultivation experience took a huge step forward with disarming simplicity, I couldn't believe it. I have uploaded tracking videos from the TrolMaster app for each week from the 15th to the 19th, as well as the two weeks of drying stage. ⭐ Controller Chronicles ⭐ Day after day I appreciated the clarity and precision for data, access to all settings and instant readings by connecting a WIFI router to the controller's LAN port. I loved the possibility to dim my lamps remotely, or even automatically based on the temperature in the box! 🌱 GERMINATION (2 days) Seeds in a glass of EC 0.4 tap water for 10 hours, then in root riots and under the lamp. They sprouted after 48 hours from dry seed. 🌿 GROWING STAGE (10 weeks and half) I decided to give these plants a long vegetative growth and this allowed me to do a lot of training on both. Starting from the 4th veg week I started with defoliation sessions every two weeks, for a total of four during the entire vegetative phase. The last defoliation was done a couple of days before the switch, in order to allow the lower parts of the plant to get as much light as possible. Furthermore I did Topping on week 6, cutting the apical branch, then on week 8 I did Topping again on several sites, as well as SuperCropping on the highest branches to make the canopy uniform. The light cycle I used is 18/6 and the last two veg weeks I lowered the light hours to 16/8 first and 14/10 then. During the veg stage I made 4 DWC change, PH was always between 5.5 and 6, about EC I started with 0.6 and was 1.4 on the last veg week. 🌸 FLOWERING STAGE (9 weeks) I started this phase after 36 hours of darkness, I then changed the DWCs solution (adding a flowering stimulator). Then I mounted the ScrOG-net about 50 cm from the base of the plants and I wove the phenotype #1 through the net occupying at least 60% of the available space; the phenotype #2 stretched shortly after the switch and I used the net only to widen the central branches. They showed the pre-flowers two weeks after the switch, then I made two defoliations on week 3 and 5 flo. During the last four weeks of flowering (weeks 6-9) I simply paid attention to the PH-EC levels to provide the roots with optimal conditions. I then kept the TEMP-RH-VPD-PPFD values ​​under control and this also thanks to the Tent-X controller by TrolMaster which allows me to provide optimal conditions also above. I chopped them when trichomes were about 85% milky and 15% amber. During the flowering stage PH was always between 5.8 and 6.2, about EC I started with 2 and was 2.3 on the last week before flush. ✅ HARVEST - From dry seed to harvest: 140 days (2 days germination + 75 days veg + 63 days flo). - Chopped after 4 days flush and 48 hours in dark; - Wet trim, removed fan leaves. ✅ DRYING STAGE - Time: 14 days; - Average: 20° C - 50% RH. - After that I made a dry trim, removed branches and sugar leaves. ⚖️ DRY WEIGHT - Phenotype #1: 230 gr buds + 25 gr larf; - Phenotype #2: 105 gr buds + 50 gr larf. So, the overall dry weight is: 335 gr buds + 75 gr larf. ✅ CURING STAGE - Curing is done after 30 days with Boveda 62%.
Likes
7
Share
Ready for harvest in 3 days.. Going for 30 hours of darkness before bringing them down. Hoping for good smoke, buds look a bit small.🌱🎋 Oh well, better luck next time, lol..🧐
Likes
1
Share
@Jonnyrcc
Follow
My tent is small and alittle crowded so I water from the bottom just easy with my small set up so I dont water every day. Wine gums is definitely a week behind the ghost train and cold creek kush.
Likes
23
Share
@1juan420
Follow
veg day 49 - 07/24 🌱bloom day 0 I switched the cycle today, so she only gets 15 hour daylight followed by her first 12 hour night Hortitec Titan 720W is on 25% with 60cm distance
Likes
10
Share
Day 57 this little lady last weekend showed up with some burning on the leaves but I’m. Not really sure it was an excess of nutrient, signals of a deficiency of K and P are also visible. So I just gave oh controlled water with regulator and enzym+ and some calmag, now everything looks fine and i ‘ m sure I t will be great this week. Tomorrow, feeding day! Day 59 lady si farting up every day, I’ve been feeding her the last two days. The yellow on the leaves is just because of a water deficiency from the last week, I wanted my lady to absorb everything I gave. On day 57 I gave 1 lt but it was too dry, so on day 58 I gave her another lt and she took it all with PH 6,2 and PPM 1000z I think I’ve got 20/25 day max left so this will be the last week of fertilising from Day 70 I’ll start mi flush. Day 62 today feeding day I finally get my p-boost and k-boost from aptus. She drunk 1 lt with ph 6,1 and ppm 1090 Let’s see🌱🌱🌱🔥🔥
Likes
56
Share
@valiotoro
Follow
Nice buds very sticky 💥 The smell its not a cheese in particular its the whooole plate of cheese with the jam & the dried fruits & earthy its delicious!🧀🍇
Likes
52
Share
@MeaCulpa
Follow
I counted the days again and came to the conclusion that I have 70 days full and harvested tonight. Enough brown and amber trichomes are also present. I'm excited to see how they taste and pop. They definitely look and smell very good. What's really funny: From the 2-3 week onwards, I turned both TS1000s up to 100% for 18 hours a day. I just wanted to find out my cap. I used around 100kW/h and €40 less in electricity costs. Compared to my last grow with Feminized and 10 weeks of flowering + Veggy. I wouldn't have expected that. Well... let it dry in peace first. Another project is already underway. Have a nice weekend everyone.
Likes
2
Share
Rotated the plants 180° to separate some buds on the other side. Last defoil and waiting... Some early harvest.
Likes
19
Share
Some trichomes are clear others are turning cloudy , still no Amber. I'll lower the feed from now with a view to harvesting in the next week to ten days .
Likes
17
Share
Began week 4 yesterday and gave her a defol, she loved it! Her flowers are starting to look really pretty too! Honestly can't wait to harvest this lady.
Likes
Comments
Share
These plants are short and wide cracking on this plant is amazing it has flattened out so yeah I think I’m get me a super pretty bright green frosty plant fingers crossed . Amazing simply to say but yes this plant is an easy one grows fast in veg but it like super soft soil I know next time lol always praying though . Class a plus genetics seriously
Likes
26
Share
Gracias al equipo de Herbies Seeds, Marshydro y XpertNutrients sin ellos esto no seria posible. 💐🍁 Runtz Punch: Runtz Punch no es una cepa para personas de mente superficial, está hecha para reflexiones filosóficas, euforia dichosa y un gran subidón corporal a la hora de dormir. Es la cepa perfecta para romper la tolerancia en cualquier fumador experimentado. ¿Cuál es su secreto? Esta cepa tiene un gran impacto con un 29% (sí, 29%) de THC. Es mejor reservarla para noches de ensueño bajo las estrellas, deja que tu mente divague mientras tu cuerpo absorbe todas las cualidades terapéuticas que tanto necesita. 🚀 Consigue aqui tus semillas: https://herbiesheadshop.com/cannabis-seeds/runtz-punch-herbies-seeds 💡FC6500: Eficiencia líder en el mercado: la lámpara de cultivo LED FC-E6500, que ostenta un estatus líder en el mercado, es una solución rentable con un PPE de 2,8 µmol/J y un rendimiento máximo de 2,5 g/vatio. Ofrece un PPF alto de 2026 umol/S y es adecuada para una cobertura de vegetación de 1,50 m x 1,50 m y una cobertura de flores de 1,20 m x 1,20 m. Iluminación versátil y uniforme. https://marshydro.eu/products/mars-hydro-fc-e-6500-730w-commercial-led-grow-light/?gad_source=1&gclid=Cj0KCQjw1qO0BhDwARIsANfnkv9IIrYSbmJqz8PqpJOIyWwJfp5bc3SGJgUV68USLQ4tjmXDYwoBuAsaAue3EALw_wcB 🚥 MarsHydro ADLITE UV/IR/RED: Para lograr un crecimiento óptimo de las plantas y maximizar los rendimientos es un arte simple que depende en gran medida de las condiciones ambientales adecuadas. Reconociendo las limitaciones de la iluminación natural y las soluciones de iluminación tradicionales para satisfacer estas necesidades únicas, lanzamos ADLITE. Estas luces especiales UV, IR y roja están diseñadas para llenar áreas del espectro, proporcionando las altas longitudes de onda que las plantas necesitan para un crecimiento y desarrollo óptimos. 🚀 Consigue aqui tu Adlite: https://marshydro.eu/collections/adlite-supplemental-lights/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 11: Finalmente estoy contento con los resultados pese al error que tuve con el temporizador, lavado de raíces para esta maravilla y corte final en una semana.
Likes
111
Share
@DevilsBud
Follow
Day 56 of flowering of the 2 Hyper Glue from Anesia Seeds Getting to the end of the line of this beautiful 2 plants she frosty she smells absolutely amazing she flushing very good and is almost done but here leaves are still Green en very healthy looking 🤔 here leaves should be turning other colors because of getting the feed out of the soil ore i am i wrong and can the nutrients be flush out but leaves still very healthy looking ? Trichomes are looking good how i want them so i am bit confused with this one but if the ppm is down enough i might just cut here down because she is looking fucking great 👌🏻 23/12/21 Runoff is around 1100 ppm almost done 👌🏻 25/12/21 Runoff is around 800 ppm I will be now drying the pots out and then it's chop time for these 2 26/12/21 Day 58 flowering runoff 600 ppm 🤘🏻 beyond frosty buds are HUGE!!! smell is Tru the roof Super Glue x Apple Fritter is something els thricome are where i want them and has a day to go to dry out the soil and then light's out for 24 hours it was a perfect grow From beginning to end can recommend any grower Hyper Glue from @anesiaseeds 28/12/21 Chop chop 1 hyper glue One left to chop good times Happy holidays people hope you have some great days stay healthy take care of the one's around yeah and let next year be more weed and Less fucking corona so i can get my ass to Alberta Canada for month vacation to see if we could move there 🤘🏻🇨🇦🤘🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
12
Share
@yd_grows
Follow
Semana sem grandes surpresas. Grade funcionando muito bem para espalhar as colas. planta crescendo rapidamente, como era de se esperar no início da floração.
Likes
86
Share
@Hou_Stone
Follow
it's been 2 weeks since it's 60% humidity and I can't go below :/ I noticed mold in 2-3 buds of my Ztrawberrys ;'(. I tried to remove the moldy areas with my pruner but it was moldy all the way to the center, I decided to just rip it off a bud. I don't know if it's a good solution, it's the first time it's happened to me
Likes
4
Share
Looking like 3 more weeks until harvest. I’m going to start flushing in about 10-12 days