🍍F A N T A I should give them around 2 more weeks to fully mature but got no more time start my holidays

Day15 - Day17: I had some difficulties to get the humidity right. It was either too high or fluctuating too much. I ended up getting a timer for the plug and running the humidifier 15mins every hour. To help with air flow, I have the main duct fan running 4 times a day for an hour. To ensure that there's airflow around the plant, I have a fan in the light as well as a smaller clip-on fan that runs during light hours. I'm not sure how the camera moved on day17... I only watered it mid-day. Day18: The timer on the humidifier and Duct Fan is now keeping the humidity in a good space. VPD now under control Day19: The Vivosun controller perfectly adapted the lighting schedule to an hour earlier, to ensure 6hrs of darkness. UInfortunately the RPi kept it's 04:00 schedule (makes sense). So I captured an hour of darkness. Adapted everything. Will have 18hrs again from Day20 onwards. Day20: In the next days I'll lift the camera higher for a better view of what's happening up top. My mesh-netting-dingsbums will arrive and I'll use this as a platform for the pi+camera. Day21: I'm not sure if I like this angle. I'll only keep it like this until she goes into veg-mode. It at least shows the new nodes growing from different perspective

Animal Mints — Legends of the Frozen North Part 2 — Drying, Trimming & Preserving the Harvest Before we begin, once again, we want to apologize for dividing this harvest into multiple reports. We know it can feel like a long journey to follow week after week, but honestly, this is the only way we can properly document everything in the level of detail that these plants deserve. Harvesting, drying, trimming, curing, resin collection, storage methods, smoke reviews… all of these stages are part of the final medicine. And instead of rushing through it in one giant post, we prefer to slow down and share every step in the most educational and transparent way possible. So welcome back to the frozen north. This is Part 2. ⸻ Ten days later, the room had completely changed. The giant living plants we harvested in the previous report had now transformed into hanging medicine. Slowly drying in darkness, at around 18–20°C and roughly 60% humidity, allowing the moisture to leave the flowers gradually instead of forcing them dry too quickly. For the first couple of days, humidity was brought slightly lower to help remove excess external moisture, but after that, conditions stabilized again for the slow dry we love so much. And then came that moment every grower knows. That little click. That beautiful snap in the branches that tells you the plant is finally ready. Not too wet. Not too dry. Just right. And honestly… after seeing these girls hanging there for days, fully intact, massive branches swinging slowly in the dark, it was finally time to begin the next ritual. Trimming day. ⸻ Gloves on. Scissors ready. Trim bin prepared. Medicine beside us. Mr. Baggy supervising operations as always. One branch at a time, we carefully broke the plants down by hand, slowly removing each flower from the stems before shaping every nug individually. No rush. No machine trimming. No shortcuts. Just patience, resin, and respect for the plant. And these Animal Mints girls absolutely covered everything in trichomes. The moment trimming started, the gloves became sticky almost immediately. Thick resin building layer after layer until eventually it rolled naturally into small dark hash balls directly from the fingers and gloves themselves. This is one of those little moments we genuinely love about harvest season. That sticky resin coating the gloves is essentially concentrated trichome resin — cannabinoids, terpenes, waxes, oils, and all the aromatic compounds that make the plant what it is. With a little warmth from the hands and gentle pressure, it naturally rolls together into traditional finger hash. Simple. Ancient. Beautiful. And of course… we also continued our little Moroccan-style “drums” with the trim. By gently agitating the dried trim across the screens, we collected an absolutely beautiful amount of dry sift. Bright golden-yellow resin, soft and sandy, full of aroma and life. No exact scale numbers this time — this was more about enjoying the process than chasing statistics — but the quality spoke for itself immediately. Honestly, this type of hash is one of our favorite ways to enjoy the plant. A little inside a joint, slowly melting together with the flower, enhancing both flavor and depth without overpowering the experience. Pure magic. ⸻ Now let’s talk numbers. And honestly… these girls performed beautifully. Plant A gave us: 127g Plant B gave us: 247.8g Plant C gave us: 287.9g For dense, compact, heavily resinous flowers grown 12/12 from seed, this is an outstanding result in our eyes. Especially considering the morphology of these plants. This style of growing continues to impress us more and more every single run. The plants remain relatively compact vertically, but the flower production becomes incredibly efficient. Tight node spacing. Massive bud stacking. Heavy trichome production. Strong support structure. Dense flowers without absurd plant height. The frozen north delivered once again. And standing there in the studio holding entire branches in both hands… honestly, it was impossible not to smile. Happy grower moment. ⸻ Once trimming was complete, the next mission began: Preserving the terpenes. Because harvest means nothing if the cure is bad. So this time we decided to test multiple storage methods side by side. Some flowers went into traditional glass jars — still one of our absolute favorite methods for long-term curing. Stable, simple, reliable, and something we continue to trust deeply. Some flowers went into vacuum-style Zamnesia metal containers, where air can be partially removed while maintaining stable conditions inside. Others went into vacuum plastic containers with pressure-sealed lids. And finally, part of the harvest also went into Grove Bags, since the yield was simply too large not to use multiple preservation systems. Inside several containers we also added 62% humidity control packs. These packs are not “magic terpene creators” or anything like that — they simply help stabilize relative humidity inside the container, preventing flowers from becoming either too dry or too moist during curing. The flowers themselves were already dried correctly before storage. That part is important. Humidity packs are not there to fix bad drying. They are there to help maintain stability afterward. And honestly, one of the most exciting things now will be revisiting these exact same flowers months later to compare how each storage method affected aroma, texture, smoothness, and terpene expression over time. Because curing is alive. Medicine changes. Terpenes evolve. And that journey is part of the magic too. ⸻ One thing we also want to mention is how much easier trimming became with the curved point Zamnesia scissors. It might sound like a tiny detail, but those curved tips genuinely help reach deep into dense flowers without damaging structure, allowing cleaner trimming while preserving the natural shape of the buds. Small tools. Big difference. ⸻ By the end of this session, trays were full, jars were packed, hash was collected, gloves were destroyed by resin, and the studio smelled absolutely unreal. pine, diesel and earthy. Animal Mints is looking amazing. And honestly… looking at those giant trimmed branches in the studio lights, it was one of those moments where you simply stop for a second and appreciate the entire journey from seed to harvest. Because this is more than growing plants. This is preservation of flavor. Preservation of resin. Preservation of time, patience, and intention. ⸻ But we are still not done. Not even close. The next report will be the final chapter of this frozen journey: the smoke review, terpene breakdown, curing evolution, flavor analysis, effects, and our complete final thoughts on Animal Mints from seed to harvest. And trust us… This girl still has a lot to say. ⸻ Huge thanks once again to everyone following this journey: Zamnesia for the genetics, Plagron,FOG Lighting, the gear sponsors, the community, GrowDiaries, the growers supporting from day one, the silent followers, the commenters, the critics, the legends, the OGs… And of course, thank you to everyone taking the time to read these reports week after week. The frozen north continues. 📡 DELETED @ 1K Please stay tuned.we never quit https://www.youtube.com/@TheDogDoctorOfficial NEW 🙏 Thank you for your patience and continued support. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it. GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial Instagram: https://www.instagram.com/dogdoctorofficial/ YouTube: https://www.youtube.com/@dogdoctorofficial Deleted by Youtube - https://www.youtube.com/@TheDogDoctorOfficial NEW Vimeo : https://vimeo.com/dogdoctorofficial Under construction stay tuned ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: 🔆 Lighting & Environmental Control • Future of Grow — Advanced LED lighting technology https://www.futureofgrow.com/ DISCOUNT CODE: DOG20 • Lumiflora — Under-canopy LED lighting https://lumiflorade.com/ • TrollMaster — Environmental controllers and automation gear (past collaboration) ⸻ Genetics • Zamnesia Seeds — Genetics used in this project https://www.zamnesia.com/ ⸻ 🌱 Soil, Substrates, Boosters & Root Support • Plagron — Substrates, bio mixes, and supportive products https://plagron.com/en/ ⸻ 🎒 Storage, Curing & Preservation • Grove Bags — Curing and storage solutions https://grovebags.com/ ⸻ 📸 Photography Equipment & Tools (Not sponsors, but part of my creative toolkit) • Sony A6700 • Sony full-frame macro lens + few more • Stacking photography workflow - learning • iPhone (for behind-the-scenes shots) As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚 📸 P.S. – The Eye Behind the Lens All photos in this diary (for now — except for the ones showing the camera, which I took with an iPhone) are taken with a Sony A6700 paired with a Sony full-frame macro lens and a few more. Photography is part of the story — it’s how we share the fine textures, the glow, and the quiet details that words can’t always capture. I’ve also started experimenting with photo stacking — a technique where multiple images, each taken at a slightly different focus point, are layered together to create one perfectly sharp image from front to back. It’s not digital enhancement or AI; it’s pure photography — a way to reveal the plant’s beauty in microscopic depth, from trichome to petal. You’ll even see a few shots of "ghost me" capturing the shots — camera, lens, setup — because every grow deserves not just to be cultivated, but documented like art. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial NEW DISCORD - Official Server Invite Link : https://discord.gg/ksjAkA5T74

Day 95 harvest of last 2 of 4 plants. 10 days after first two were harvested. BB1 and GG1 seem to have denser buds than BB2 and GG2. I think the yield will be greater also. First two plants dried for 6 days at 45-50 RH and 65-70F and put into quart Mason jars with humidity meters and pouches at 62 RH. Once second two have dried, will update dry weight for all 4 plants in Harvest week.

Week 7!🎢 She s the biggest one😧 Buds everywhere For the smell,you open the door in a candy shop delicious 🤤🍭

Gave the photos a haircut today. Removed some fan leaves and lower branches that wouldn't amount to much. Gave the branches to my horse because he loves them! Tried enticing the ducks with fan leaves but they weren't having any of it. They prefer lettuce, not "The Devil's Lettuce"😂 I added in a little 5-1-1 fish fertilizer to my feeding regimen as well. Still picking off inchworms. And as you can see I made it to the hardware store and put up this baby almost completely by myself. I only asked my husband to hold the center roof panel support while I screwed it in. Couldn't have been better timing since hurricane Dorian came through yesterday and we had plenty of rain. Of course it didn't fully protect them but the majority of the rain hit the roof. And then it got down to 49 F last night. It's really Fall now! The big girl (I'm calling her Gen 2, let's see who puts that together) is starting to get frosty. Rogue One is still a little behind but I'm not worried. All in good time, all in good time...

This is week three miss marked the first week

Привет садоводы !!! Вот и закончилась эта история Strawberry Chemdawg OG И закончилась она просто великолепно Сорт просто супер Красавица опять выросла шишки тяжелые и твердые как камень все покрыты обильно смолой судя по предыдущим опытам ,получилось не мало сорт отличный Создателям SSSC заслуженный поклон ! Всем спасибо кто следил за этой историей !

Seedsman Seeds Germination Report - Run 01: The White OG Journey Kickoff to Germination: The Start of Something Great! Welcome to the beginning of this adventure with The White OG feminized seeds from Seedsman Seeds. Excitement is in the air as we’re searching for strong, resilient plants, and this journey has all the best tools and tips. Starting with five seeds, we’re aiming for a solid beginning and maximum potential. Let’s explore every step in detail to make this grow as robust as it can be! Germination Process: Tools of the Trade TheCannaKan: The Ultimate Germination Gadget I’m thrilled to share my love for TheCannaKan, a little germination wonder! This tool is essential for any grower who wants to start their seeds with precision and care. I noticed rapid results in just 24 hours, with the seeds showing signs of life. At about 32 hours, I transferred them to the Root Riots, which brings us to the next exciting stage. Why I Love TheCannaKan: • Quick Results: Seeds sprouted rapidly, minimizing wait time. • Consistency: Keeps moisture levels optimal for uniform germination. • User-Friendly: Simple yet effective for both new and experienced growers. Root Riots and Their Role in Root Development After sprouting, I placed the seedlings into Root Riot cubes under a dome. Root Riots are fantastic for stabilizing young plants, providing an airy and nutrient-friendly environment that promotes robust root growth from the start. Benefits of Root Riots: • Root Aeration: Soft yet structured, these cubes support root expansion. • Moisture Retention: Holds just the right amount of water for growing seedlings. • Enhanced Root Health: The cubes are ideal for preventing damping-off and ensuring healthy, white roots. Nutrients to Kickstart Growth: Aptus Holland Regulator and Startbooster To give the seedlings a perfect start, I added Aptus Holland’s Regulator and Startbooster (1ml/L each). This mix promotes early root and stem strength, giving seedlings the ability to absorb light and nutrients more efficiently. • Aptus Regulator: Enhances plant resilience, aids in nutrient absorption, and promotes early vitality. • Aptus Startbooster: Adds a balanced mix of growth hormones and nutrients that are ideal for the early stages, encouraging healthy roots and faster seedling growth. Light and Environment: Future of Grow FOG LED with TrolMaster Tent X Controller I’m using a Future of Grow (FOG) LED at 600W, but keeping it dimmed down to around 200 PPFD. This setting is controlled by the TrolMaster Tent X Controller to give the plants the perfect start without overwhelming them with intense light. Controlled lighting helps seedlings to develop without stress, encouraging healthy growth and internode spacing. Shoutouts: • Future of Grow LED: High-quality, efficient LED light that adapts well to seedling and veg stages. • TrolMaster Tent X Controller: Reliable and intuitive control over light, humidity, and more. Perfect for a hands-off, efficient environment setup. Observations: One Seedling Takes the Lead At the end of this germination stage, it looks like one seedling has emerged as the strongest, while the others may need a few more days. Patience and observation are key; some seeds naturally take a bit more time to sprout. I’ll keep monitoring these with hope, allowing each seedling its own rhythm. Grower’s Notes and Tips • Consistency Matters: Germination is all about steady conditions—consistent moisture, gentle nutrients, and stable lighting make all the difference. • Document Everything: Keeping a log of each step (like this one!) helps track growth patterns and provides valuable insights for future grows. • Stay Positive and Patient: Not every seed will sprout at the same rate. Trust the process and remember each plant is unique. Community Shoutouts Thank you to everyone who makes this process smoother and inspiring—TrolMaster, Aptus Holland, Future of Grow, and Seedsman Seeds for amazing genetics and tools, as well as the growers’ community who share insights, tips, and encouragement along the way. Next Steps Now that we’re through germination, we’ll move into the early growth phase. I’ll keep documenting the lighting adjustments, nutrient changes, and growth patterns of each plant, especially that eager seedling leading the way! Growers Love, and here’s to a strong start for the future of this grow! 🌱 DISCOUNT CODE - SeedsmanSeeds - DOGDOCTOR 10% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚

 Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All and remember to keep that smile big and alive 💚

Girls are moved in and started there training with the trellis. they are stinking skunky already might have to hook up the carbon filter when they start to flower. the tops have filled all 6x6 slots plus.Horizantal is done after one week in flower going virticle on day 8 of flower this Bubba Cheesecke is so Bitchin you cant get much better than this Keeper strain.

Plants are responding well with the gold leaf at 4ml per gallon. The reservoir is starting to have a strong bad smell on day 3. May switch back to ph'd water at 6.5, then add gold leaf at 10ml gallon every 3 days. They're drinking water like crazy. Iowered the light to about 20", running on 580 watt.

Hello everyone, masters and beginner farmers! welcome back to the enchanting gardens of Peaky

I topped and trained them two more times. I also lolipopped them, that is cut the bottom 2 sets of leaves and branches.

Beautiful buds super sticky✂️ Delicious smell something new to me! Cant Wait the curing to taste this beauty

Seconda settimana di fioritura, lo stretch sembra alle fasi finali e già iniziano a spuntare i primi accenni di fiori, adesso arriva la parte divertente!

Topped this girl this week, she’s growing pretty good. Very nice looking plant to my eye.

As an Auto she has been the most finicky plant ive ever grown. EXPERIENCED GROWERS ONLY!!!!