Likes
Comments
Share
@AsNoriu
Follow
Day 29. Best from all but very sensitive to nitrogen, pot is still full and as she takes over all of it , she constantly have few overdose issues. Very responsive to leaf tucking , stem twisting, forms nice canopy, will be biggest producer no doubts in this run. Will try to bend main stem with some LST in few days. Mars TS1000 - Light is solid and does job. For last week output is on max . Still rotate a lot, but am happy with development. I miss more good wind inside, but i live in shared house ;)))))))))))) even really silent air system is still loud on desired speeds ... Hope next week ill send her to flower. Will top up with Worm Castings and Mycorrhizae during training in few days, when girls will be watered next time. Rhythm is good, every 3 days pots are light. 1.5 liters to each went straight in after photo shoot. Day 31. Applied BioBizz Leaf Coat when lights went off. Loads of training was made today too. Day 33. Now girls are trained daily. Top shoot twisting, leaf tucking, rotation around axis , changing positions inside of tent and so on. Always wash hands before any training, it is a must. Still havent made mind, scrog or lst ... Think tomorrow will be watering day and i have to decide which way to go , i am fliping them at next watering 100%, otherwise again rush to harvest before late spring holidays ... Happy Growing !!!
Likes
6
Share
@DimJesus
Follow
Bom, essa semana começaram a sair alguns pistilhos e isso indica que será a última semana dos fertilizantes do vegetativo, ainda não sei específicamente o dia mas vou mudar logo logo. Estou bastante satisfeito com o crescimento delas, é visível que as plantas que tem somente um nó estão crescendo mais rápido que a que tem 2 nós, me dando muito o que pensar sobre os próximos cultivos. O cheiro também começou a espalhar, bem de leves mas consigo sentir invadindo minha casa kkkkkkkkkk gosto muito 🌱💚😁
Likes
20
Share
WEEK 1 - 23/7/2021 - 30/7/2021 My 6th grow! I've managed to finally build a reliable RDWC system. It has been put on hold for nearly a year now. My primary concern is flooding when I'm not around. Another if there is any blackout affecting the water/air pump.  I've had the system on test run for a week now and it has been fantastic. No leak whatsoever! I'm so glad I decided to go with all PVC pipes and bulkheads rather than using vinyl tubing for the waterfall outlet. So far so good! Can't wait to transplant into the system. :) 20/7/2021 - 2 packs  of Harlequin seeds from Weedseedexpress (5 + 1), 12 seeds soaked in 10ml/L of Nitrozyme for the next 24 hours. 21/7/2021 - All 12 seeds transferred to paper towel and soaked with Nitrozyme and placed in humidity dome. 23/7/2021 - Only 5 out of 12 seeds germinated. But all 12 transplanted to small rockwool cubes, soaked with Nitrozyme mix water then placed in humidity dome. I accidentally cut one of the cotyledon while removing the shell. 27/7/2021 - 1L of water mixed with the following: Rapid start - 1ml/gal - 0.3ml Hydroguard - 2ml/gal - 0.5ml 30/7/2021 - It has been a slow start and the seedlings have been showing signs of nutrient burn. Out of 12 seeds only 4 properly germinated and even that is showing issues. I don't have a good feeling about these seed genetics. I'll give another week to see the growth response.
Likes
12
Share
Estupendo olor y pegote de resina. Muy recomendable!
Likes
410
Share
https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND THEY WILL REACH FOR THE STARS WITH MARS🤘🤣. So it's been almost a week under the new MARS HYDRO FC4800 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. I think it might be the blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I've owned a gorilla grow tent before and MARS HYDRO TENTS are better. Don't waste the money on a gorilla tent, get a mars and save a couple hundred bucks for your fertilizers and soils👍🤜🤛I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll @marshydropenny Happy growing to all my friends 🤜🤛
Likes
34
Share
@AshBrand
Follow
12/22/21 - The plants look great! We have taken some fan leaves off. Keeping the airflow moving to avoid any powdery mildew. We are going to make topical salve with trim and popcorn nugs. We usually make butter for edibles but we’ll try something new. 12/23/21 - They look really good. Today we have fresh water for a semi flush. We will begin with nutrients and then flush 10 days before harvest. 12/24/21 - The humidity is finally on our side, ranging between 40-50%. We are very happy and excited as the buds continue to grow! 12/25/21 - Merry Christmas! The plants look great! Lots of neat colors in there. Each strain is showing off its own color. Check out todays pictures. 12/26/21 - They look really good today. Humidity is at 45%. Harvest is coming up pretty quick and we are excited. 12/27/21 - Looking good today. Just feeding them and letting them flower away. The buds are getting pretty big and dense. 12/28/21 - They look insane. Going to feed them the last of the nutrients listed above and next week start plain water/flush until harvest. Check out the two videos above!
Likes
15
Share
Week 19 for Gelato 41 by seedstockers, Shes just getting so big, she was defoliated again at the start of the week & was given a dry amendments bloom feed by greenhousefeeding. And shes being fed 10L of plain water every morning.
Likes
65
Share
@Dedon
Follow
Hi everyone ! Water change today, only tap water with adjusted PH. leaves color is now light green and some leaves are dying. Buds are solid and the smell is awesome. Last week of flush...Will harvest in the late week
Likes
14
Share
@Canadian
Follow
When it comes down to this girl I think there’s not much to say a picture says most of the story react very well to training gives very large flower and with an incredible exotic Look the only thing the pictures cannot tell is the lovely fruity smell With skunk mix into that And of course the beauty that is unreal I’m not too sure if I’m going to leave her one or two more weeks definitely this girl you don’t want to rush her , you want her to be just perfect thank you for reading I will continue to update have a happy grow.
Likes
7
Share
@MistaOC
Follow
Grow Diary – Day 73 (Flowering Day 53) Strain: Sour Frootz by Karma Genetics Plants: 4 clones Training: HST + SCROG Nutrients: Green House Feeding – Bio Grow & Bio Bloom Date: May 24 (Saturday) Status: Entering final ripening – harvest approaching At Flowering Day 53, the Sour Frootz plants are now in the late flowering phase, showing strong signs of maturity. Buds are fully formed, tight, and heavily coated in resin. Trichome development has peaked visually—most heads are now cloudy, with a noticeable rise in amber trichomes, especially on upper colas. The aroma is intense and complex: sweet, citrusy fruit mixed with sour funk and subtle earthy undertones. The terpene expression is at its most volatile, and the flowers are sticky to the touch. Some larger fan leaves are beginning to fade, showing natural senescence—primarily a gentle yellowing, with no signs of stress or deficiency. Nutrient Program: • Still running Bio Bloom, though it can now be tapered or discontinued if you plan a light flush. • Bio Grow is no longer active at this stage (breakdown complete), but residual nutrients are sustaining the plant. Watering is now more moisture-controlled to avoid excess humidity near dense colas, reducing mold risk. Additional Notes: • No pest pressure • Canopy is stable, buds are weighty • Lower humidity maintained (~40–45%) • Good airflow across and under canopy • Natural color fade beginning, especially on fan leave.
Likes
8
Share
Week 8 Flower (Day 85-91 | Flower Day 50-56) Day 85 - Feb 19 (Flower Day 50) 00:10 pre top-off: pH 5.95 / EC 1.674 Post top-off: pH 5.88 / EC 1.658 Noticed again that the real bulking seems to be happening under the very top tips. Pistils lower down are still white. This matters more than the “top of the tops” look. Day 86 - Feb 20 (Flower Day 51) 00:10 pre top-off: pH 5.92 / EC 1.804 15 min post top-off: pH 5.95 / EC 1.720 EC had crept up. Top-off brought it back down. Plant posture looks good (praying, not tacoing). Still feels like she’s in “steady stacking” mode. Day 87 - Feb 21 (Flower Day 52) Reservoir change at 01:00 New res: pH 5.78 / EC 1.752 Fed ½ dose of what Advanced Nutrients recommended. Reset felt worth it because I couldn’t find any res changes after Feb 6 in my notes, and I didn’t want to gamble this late in flower. Day 88 - Feb 22 (Flower Day 53) 00:10 pre top-off: pH 6.0 / EC 1.780 ~1 L consumed Post top-off: pH 6.0 / EC 1.894 (first reading likely off - meter acting a bit wonky again) PPFD noted around 790. Also: smell is getting more funky (in the good way). And importantly: she’s not “scarred” anymore - almost all previously damaged leaves have been trimmed away by now. Day 89 - Feb 23 (Flower Day 54) 00:10 pre top-off: pH 5.0 / EC 1.852 15 min post top-off: pH 5.58 / EC 1.724 pH came in low and got corrected with the top-off. Plant looks fine. No sign of new damage spreading. The trend stays: tops look “older,” but the mid/lower stacking is active. Day 90 - Feb 24 (Flower Day 55) 00:10 pre top-off: pH 5.56 / EC 1.874 ~1 L consumed 15 min post top-off: pH 5.67 / EC 1.724 Leaves praying. No taco. Everything feels stable and predictable right now - exactly what I want after the January chaos. Day 91 - Feb 25 (Flower Day 56) 00:10 pre top-off: pH 5.73 / EC 1.872 15 min post top-off: pH 5.80 / EC 1.786 Still holding that same EC band after top-offs. Some tip burn / slight leaf edge crisping visible on a few leaves, but nothing that’s escalating fast. Focus remains on bulking and resin rather than chasing white pistils on the very top tips. Thricomes look mostly clear with a few cloudy and no amber. Week 8 Notes / Takeaways Res change happened Feb 21 @ 01:00 (pH 5.78 / EC 1.752, ½ AN dose). EC after top-offs mostly sits ~1.7-1.8, which is consistent given ~800 EC tap water baseline. Smell turning stronger + funkier in a good way. Canopy damage from the old incident is largely a non-factor now - most of those leaves are gone. The “action” is in the mid/lower stacking and healthy sugar leaf resin production. I'm hoping for another 3 weeks of flower before harvest.
Likes
13
Share
Se regó con un té de compost y se ven ya las flores con mayor tamaño y tomando buena forma no le hice defoliacion a este cultivo para testar los quantumboard
Processing
Likes
27
Share
ok so everything has gone fantastic , no nutrient burns at all , and have been slowly creeping up the base nutrients , i have stopped the cal mag and now adding house and gardens bud XL at full strength these girls are now in full swing of flower and i bought a new ph stick this week , i have found when PHing the feed bucket that its best too have air stones in the bucket , add all nuts and then ph but do not use the feed that day as if you check the next day the ph is off again so i left it 24 hours after i add more ph down , and it seems too make the measurements alot easier and stable , i have bent down the main stems " without damaging them onto my netting too A keep the canopy all the same high so my lighting is covering all plants at the same distance and also it allowed the side stems too reach up too , i also was sponsored another new led light by kingbo this week so have added another 600watt led too the grow , so now have two 600's and one 900watt , and temps are still fine sitting at 24c lights on and 19-20 off , so am pleased with that , this lady is nice and compact and tight lots of leaves that I had too remove too open up her bud sites , stretch was also minimal ,
Likes
9
Share
This week i flushing a plant 7-10days and use ice burn then close a light before hardvest 2days
Likes
12
Share
@Pedro_88
Follow
Cómo ven va bien grande mi chemical bride y va creciendo muy bien
Likes
7
Share
@Mrg7667
Follow
Lowered the lights a good 8-10inches just because i realized i could get them closer without burning! Going for around 6-7 inches above canopy getting the temp in the high 70s low 80s om top canopy. All pheno are getting very unique and super resinous! I have a slight lnat problem going to spray this week when i get paid
Likes
Comments
Share
I had two sprouts in the pot. I will focus on the middle one for the majority of the grow. It had slow growth in terms of height by the end of week two. However, the first set of 3 fingered leaves had come in.