Start of week 7 Day 51 was the hottest Day ever 😫

The 5x5 is one week from harvest. I’ve been sailing back nutes and she’s getting her last feed of 1.6 EC before the final flush. Still a bit frustrated that this app won’t allow me to separate my genetics but tent and week on here. I’ll update the 2x4 tomorrow as it’s entering week 3 flower. I also took about 150 clones of all the genetics I wanted to keep during this pheno hunt. We culled a lot of the veg tents.

Orange Dragon Rider = Nimbus2000 f1 x Amber Dragon f1 both from Dragons Flame Genetics

The progress is real! On the 14th, all seeds had germinated. The difference of 4 days is, for me, unreal. I will keep you guys updated. See you soon

si, una va a su rollo

Welcome to my Ganja Farmer contest grow. Drop a like if you want me to drop by your grows. Either way thanks for dropping by She's doing really well. Would like for her to have bigger buds. Should of started flowering her under my P1000. She has a lovely structure and some nice colors showing up on the buds which seem to be getting nice and dense 20/6/22 she's doing really well. Growing nice and strong. This time I think I'm going to have to do bud washing as the hair is just beyond a joke now. I'm going to do a deep tent clean this week. Just waiting on some stuff and I'm going to get my tents in order. Plant is at to getting struck down with what I'm nearly sure is iron defs. Found 1 to 2 leafs starting out yellow with green vains. Let the soil dry out after a few watering and gave them a boost of Iron (fe). (Have put up a video and focused partly on showing a light iron def. This leaf showed up like this 4 days ago. Took me a day to dry out the soil so it was a little harder to notice) but if I hadn't of fixed you'd of seen what looked like a N def (a yellow leaf with green vains) hope this video helps to help u. Feel free to DM me if you need me to go into any fixes 24/6 Have installed my new AC intake unit, it's more of an AC unit the way I have it set up. I have it outside the tent. And have a negative pressure environment. So, if I can drop my outside temp then in turn the inside temp will drop. There's no point in having it set up inside with the lights off as the RH will go sky high with no exhaust set up as that would defeat the purpose of having AC in an unsealed tent setup. Be good though when I want to grow with co2 this beast will have no issues keeping the temp in check. It's doing my whole top floor. Yeah, it's struggling. Have it set at 20% but it won't drop to 20% until you reach the temp you have it set at. It was 31.5 brought it down to 27.5 in 15mins and that's a top floor in a 3 bed big bedroom house. Id say it would work quicker with the door closed but my RH will only go high and I'd have to run my Dehumidifier and that well, raise the temp. Going to see what happens by dropping the temp to 24c when the air around the pre attached probe goes down to 24 it will go to the % you have it set at. But until then, (you reach the temp) it runs at full steam. It has brought the temperature down 2.8-3c in 15mins. Update. My AC unit intake is nothing but a big ass temp controlled intake, not control temperature. It does help draw up cold air from an extended 10m ducting so I can get 18c air if I want. Just gotta run big ass ducting threw my house. Just until I can punch a hole up into my attic. It runs 16c up there. But I'll need a filter 1st and then I can drop temps rapidly. Looked into an AC unit. They are affordable. A 7000 Btu unit would do my grow room. Runs at 800watts an hour but you have to hook it up to a window. My air outside at night is that temp so I'd be better just running poxy ducting from my attic using this powerful 110watt intake. It'll be great for air flow with co2 growing. I'll hook it up from the bottom to the top and run the ducting either side and let the unit sit on top of the tent. It's so powerful won't need any fans. Just co2 and high ppfd which I have now. Thanks for reading this week. gottagrowsometime

No problems while drying. Really strong smell while drying you should use a filter-system for that.

All the plants show pistils and look hralthy except the one in the middle, probably taking it out if it doesnt get better.

TUESDAY 1/15: MuthaPHucking PH fluctuations again!!!!! 😖 I calibrate my 2 cheapo- ph pens everymotherPHucking day and STILL it happens....PHuck the dumb shit....I just ordered a $100+ Apera tester.👈 I watered everybody with about a half-gallon of water, plus heavy boomerang and calimagic, some bud candy, some terpinator, some kelp me kelp you, some armor silica, and the bloomers got their first dose of open sesame..no big bloom or grow big for anyone. WEDNESDAY: I foliar fed them a few times and calibrated my new ph tester. The big C4 is branching like crazy...the little one is flowering now..hopefully she stretches really well too. All 3 WW's have started flowering. I FIM'd the last 2 WW's today, so everybody's done. Debbie Diesel is looking strong..big thick main stalk. The Northern Lights is also showing me some vertical growth now. All 3 Candy Canes are budding up nicely.👍 FRIDAY: I fed everybody about a half-gallon and foliar fed them a couple of times. SATURDAY: Foliar fed a few times The Candy Canes have stretched so much that I may need to raise my lights a little..they are about 16 inches from the tops now....monitoring... SUNDAY: Foliar fed a few times Still no sign of light burn on the CC's, so I'm leaving the lights where they are. MONDAY: Still moist..will water tomorrow with my new pump-driven system👍

Did the start of my flushing last night. In 6 to 7 days I'll do another flush then 4 days after that, will do the 3 day flush before harvest. The aroma is overpowering very sweet with a bit of spice to it. Bud production is moving at a brisk pace. I did a small trim last week to uncover a few bud sites.

I’ve used dragon force to bring these two plants to the finish line . I’ll be chopping probably in around 8 days

Planing to move in dwc under fluence light food by Front Row Ag. Let's see how she does.

Was Easy Going No Issue Smaller side but didnt do much just let her go little over water @ Times from all the Rain was having... but she handled it

Germinating 3 Purple Kush Feminised seeds. filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. This results in increased germination speed Hopefully all 3 seeds will germinate by tomorrow? Seeds popped today:-)transferred 3 Purple Kush seeds in to small pots 10/09/23 3 Purple Kush seeds, 1 seed in each small pot. Each Pot is Half filled with lite mix compost and Half filled with Vermiculite , watered planting medium before sowing seeds 2cm deep in planting medium. The seed will push through the vermiculite easley with very little effort, in effect increasing higher successful germination rate, the compost will offer the first tap root an immediate lite nutrient supply. Placed 3 pots on top of a Propagation heating mat for correct germination temperature, position in a shaded place, and keep out of direct sunlight. This may seem like a lot of effort? and it is, but it will be highly beneficial by increasing a higher germination rate and higher amount of seeds will germinate from using this method :-) especially if your seeds were expensive. 11/09/23 no sprouts above the vermiculite yet, i will check it again tomorrow. Today 2 Purple Kush Germinate and rise above the vermiculite 3 days after sowing. Purple Kush is going ok, it could be growing faster, unfortunately i can't upload new photos because there is a problem in the GD system, they are doing there best to fix this problem as soon as possible. GMO Cookies where started 16/09/23 filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. 3 seeds sprouted, but only 2 survived, it become to hot and one GMO Cookie sprout died. I have now started another strain (Party Monster) 19/09/23 filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours, 5 seeds of Party Monster have sprouted and are under the same 100W LED grow light. GMO Cookies have all come up above the vermiculite and are now positioned under a 100W LED, there is a small clip on fan blowing and circulating the air. This is my second attempt to grow GMO Cookies from 3 feminised seeds, i messed up on the first 3 seeds, i put them under a 250 Watt LED and it fried them, my folt. Growing from germinating seeds is a very delicate situation, your environment temperature needs good control. 2 Party Monster seedlings are looking good, coming along well under the 100W LED light. 3 GMO Cookies are looking good also under the 100W LED light. Plus i have now started soaking in glass of water 03/10/23, 5 Strawberry Yields fem seeds aka Strawberry Fields. filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours. The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. This results in increased germination speed Hopefully all 5 seeds will germinate by tomorrow? The 3 GMO Cookies fem seedlings are coming along well, keeping them under the hood of a propagator, i have many mixed seedlings under the same hood, to keep seedlings protected from this relentless Spanish heat. 5 Strawberry Yields fem seeds have all sprouted and are above vermiculite, keeping them under the hood of a propagator, i have many mixed seedlings under the same hood, to keep seedlings protected from this relentless Spanish heat. Also positioned also under the 100W LED light, indoor temp 29 degrees humidity 65%, still to hot for seedlings to be directly under lights due to high temp in the room. 3 Strawberry Yields sprouts are doing well, gave 2 seedlings away, no space for all 5 plants, coming along well under the 100W LED light. 27 degrees humidity 55% good growing conditions Super Lemon Haze I began soaking 13 feminised seeds SLH since 27/10, after 24 hours soaking 11 seeds opened in filtered water in glass, also added 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. This results in increased germination speed! 1 Super Lemon Haze fem seed planted in a 2 ltr pot 28/10, this is the only plant i will keep for flowering. The Pot is Half filled with lite mix compost, and the rest of the pot is half filled to the top with Vermiculite , watered planting medium thoroughly soaking it before sowing seeds 2cm deep in vermiculite. The seed will push through the vermiculite easley with very little effort, in effect encouraging a higher successful germination rate, the compost will offer the first tap root an immediate lite nutrient supply. And i planted the 11 remaining popped SLH seeds in the brown round pot, this is just to see how many will rise above the vermiculite from the 13 SLH fems seeds soaked on 27/10. I will give these away to a friend. Both pots have been placed on a propagating heating mat for consistent and ideal germination temperature until all seeds have risen above the vermiculite. Once my 1 fem seed has germinated! i will cover the pot with a transparen plastic bag and place the pot 20cm below a 100W LED light. Super Lemon Haze feminised seeds Seeds sourced from Satdica Bulk Seeds Soaked seeds 27/10 planted up on 28/10, 12 out of 13 seeds have transformed in to 12 healthy little seedlings. 11 seedlings will be given away to a friend, and i will keep the one seedling you see already planted up in a black 2 ltr size pot. Now positioned under my 100W LED light, distance 15cm above seedlings. Light cycle 24 hours. Keeping them covered with propagating hood for a few days longer to allow seedlings to become better established before removing the hood. The vents on hood are fully open to allow seedling to slowly become accustomed to the outside vege room space. Gelato Cookies 3 Feminised seeds Satdica Bulk Seeds Popped 3 Gelato Cookies Feminised seeds today 06/11 filtered water or bottled water in a glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. After placing on propagating heating mat for 24 hours. This resulted in increased germination speed! and today i can see little white taproot tails protruding out from the seed husk 👌 3 Gelato Cookies seeds, 1 seed in each small pot. Each Pot is Half filled with lite mix compost and Half filled with Vermiculite , watered planting medium before sowing seeds 2cm deep in planting medium. Spoon your seeds into it's planting medium, do not touch with fingers, spoon it in with half spoon of water and a seed, place the seed in the center 2cm deep in the planting medium, water it in again very lightly to help the seed settle into a comfortable position before leaving it to rest covered on your heating mat. The seed will push through the vermiculite easley with very little effort, in effect increasing higher successful germination rate, the compost will offer the first tap root an immediate lite nutrient supply. Watered and fed them in with Plagron Terra Grow 5ml to a ltr of water, i may have added too much, perhaps 2/3ml to a ltr of water would have been enough? placed 3 pots on top of a Propagation heating mat for correct germination temperature, position in a shaded place, and keep out of direct sunlight. This may seem like a lot of effort? and it is, but it will be highly beneficial by increasing a higher germination rate and higher amount of seeds will germinate from using this method :) especially if your seeds were expensive. 3 Gelato Cookies have come through the vermiculite, 09/11 and now they are positioned under my 100W LED grow light. I didn't expect all 3 seeds to pop, because 1 seed looked like perhaps not viable, because i only keep the bad looking seeds for myself and keep the best seeds for customers. I am keeping them covered with transparent plastic bags for a few days to protect them in case it's to hot in the 24/7 grow room which is 24 degrees, this is probably an ok temp for them? but i'd rather not run the risk. Romulan Feminised seeds Germinating 3 Romulan Feminised seeds 26/11 filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. This results in increased germination speed Hopefully all 3 seeds will germinate by tomorrow? 27/11

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ❤️💡🌱😽💨 Almost there!! This stran smells incredible! They're all fading fast and putting on a beautiful color show. These buds are rock hard and completely covered with frost (reminds me a lot of Purple Ghost Candy by Seedsman).. 2 plants look just about done but the other maybe a week behind. We'll probably start harvesting the first few from this tent in a week 🌱

Hey everyone 😀. These weeks they have continued to develop very well 👍. They have made a huge leap forward since they were repotted 😃. They will be topped again this week, and will then move to the flower tent next week 😍. I am very curious to see how it will develop until next week. I wish you a lot of fun with the new update, stay healthy 🙏🏻 and let it grow 🌱🍀 You can buy this Strain at : https://sweetseeds.es/de/cream-caramel/ Type: Cream Caramel ☝️🏼 Genetics: Blue Black x Maple Leaf Indica x White Rhino 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Amnesia is really starting to fire 🔥, buds are lining the branches nicely, in particular the 2 crowns where she was tipped early on. The weather has really eased off heat wise, in fact it has changed a bit too quickly, and I kind of hope for a few more warm sunny days now. Amnesia takes heaps of feeding and loves it for the most part. No sign of burn, but I have one bud that seems to have a lime yellow outbreak on top. I’m not too worried because it’s only on one bud, and it’s going away a bit now, but it’s weird and I wonder if you guys have seen this before @grey_wolf or @Med_in_Tropic?? Maybe she got the corona!! 🍻

Day 57 Day 14 Flower Done a big feed for start of week. Using 3ml not the recommended 4ml per ltr of base nutes. And using rec 2ml per added nute per ltr. She is initiating her stretch now, looking so happy and healthy, so this is 5/5 of the terp tree seeds. 2nd one to make it to flower. Very strong plant I'm happy 🙌💚 Day 58 Day 15 Flower Updated pictures today, how many tops?!? 🤣 Holy cow. No topping just LST and trying to mainline. Now I see the results on the tops already in start of flower, by doing this method I see it focuses more energy and effort from the plant to be directed to the tops after mainlining / lollipopping. If not over stressed they flipping thrive it's incredible. She is throwing out fat new growth, nodes are forming so nicely and she's about to pop 💪💚 Day 60 Day 17 Flower 27/05/24 Water today with calmag. Stretch is savage on her 😍 Day 63 Day 20 flower. 30/05/24 Again water with calmag today. pH 6.43

Start of week 6