Likes
Comments
Share
Another excellent easy to grow strain. Early on she developed what appeared to be rust spots on the bottom half fan leaves. I implemented calmag into her feeding. It didn't appear to reverse the impact but did delay it or slow it down. Not to mention the last month she and the others have been neglected due to my schedule. She has been very resilient throughout. She is in the drying phase currently so I will definitely update when I take her for a test drive.
Likes
1
Share
Likes
22
Share
@Slobasian
Follow
Love every plant each one is growing differently stacking different even the visual difference of one strain growin two different ways combined smells of diesel, pez candy and lemons
Likes
22
Share
D15/V13 - 07/09/23 - She's ok now, new home and lot of space 🏠 D16/V14 - 08/09/23 - I cutted the lower branches and leaves ✂️✂️ D17/V15 - 09/09/23 - Added a CO2 dispenser. The set up is ok 🛠️🛠️🛠️ D18/V16 - 10/09/23 - Added some nutes 🍗 D19/V17 - 11/09/23 - Waiting to start bending her down 🧠 D20/V18 - 12/09/23 - Added water 💦💦 and nutes 🍗🍗 - pH is too low, I added some pH+ 📒 D21/V19 - 13/09/23 - Started LST, one worker is bending her properly 🌿🌿🌿
Likes
10
Share
All in all i ended up with almost 2.5ozs of some super nice rock hard buds and another oz of some larfy smaller buds i made into cannaoil with coconut oil!! I will grow her again for sure but next time i will start it in my big tent and let her stretch her arms and legs out and see if i can get a monster!!!
Processing
Likes
7
Share
Week 2 began very routine so far I have only watered with pH adjusted water and no nutrients yet. But looking to do a 1/4 strength feeding the next time I water. 10/26/2018 - Catzilla damaged 3 plants!!! I left the tent open for 5mins to get some water and by the time I was back the damage had been done. I am hoping they will still pull through. Any suggestion on what I can do to help save them??? Ironically the culprit appears to be my cat called Poison.... 10/28/2018 - 1/4 Strength of Nutes 3gallons (11355ml) - 6ml Micro/12ml Bloom/3.75mlCaliMagic 10/30/2018 Two days into first feeding. Plants seem to be pulling through and look good "Disco" still has some discolouration in the leaves, still unsure what is causing it. 10/31/2018 - Final day of week 2 Lots of growth since giving them nutes. On to week 3!
Processing
Likes
11
Share
2 less hours of light, will remain on 12/12 schedule. still flushing.
Likes
12
Share
@NONSENSE
Follow
Good afternoon everyone! One more week is gone of the flowering. the plant looks beautiful, the buds become heavier every day. I still only use Hesi sponsored nutrients with every watering. I don't overdose on nutrients and follow the weekchart I got from Hesi. genetics is good old school from Neville's seed bank. It is also a normal seed, not femenized. The light schedule is 12/12 , feeding every day( I try to handle the cocos always wet) next week is the last flowering, after that I will clean the plant and will harvest it. Good luck, everyone
Processing
Likes
25
Share
@Xanthur
Follow
So much water usage this week! They started the week consuming about 5 gallons per day between the 8 plants. By day 4, they were consuming 10 gallons per day. That consumption caused my exhaust fan to run constantly to keep the humidity down. It nearly drained my tank of CO2, so I shut it off and set it to maintain 77 degrees and 55% RH. I came to the conclusion that I can only use CO2 in veg since it would seem to require some intense dehumidifying in room after they reach flowering size, and I only have enough room to fit a 30 pint which runs constantly and does not keep the humidity down on its own. The big left side plants are growing like crazy, and I am running out of squares in the screen. I had to start some additional training on branches to even out the canopy. Other than that, no problems. So far, so good! Some people have commented on crowding and airflow. Thanks for the input, everyone! Just to add some details about my airflow, I have 4 of the 6" oscillating clip fans. Two above and two below the canopy. There is a dehumidifier running constantly in the middle of the tent that is constantly blasting out warm air. There is an 800 cfm fan/filter recirculating air inside the tent. The 350 cfm Cloudline Infinity S6 exhaust fan runs frequently with CO2 on and constantly with it off with two 6" passive intakes at the bottom of the tent. Additionally, I remove fan leaves when they are crowding. I will do a major defoliation in week 3 and probably raise the screen a few more inches next week since I have a lot of stretching left to do.
Likes
21
Share
Loving this week! A week of healing and growth. Topped some side branches on the og kush plant in middle. I’m still stumped if I should top again? Or just let me veg for a few more weeks??? Using water in between nutritions. Made a mistake with one of the plants tied down. I loved the other pot it was tied too and almost ripped the plant in half! Oh man!! But she’s tapped and I’m recovery now! Super excited for the growth and learning! Loving how things are! Happy growing friends “ been a couple days sense last updated og kush is doing better healing ❤️‍
Likes
42
Share
Hey everyone 😃. Due to the lack of space in the flower tent at the moment, I decided to use a delayed LST for the 2 women 🙂. So I can let them grow again in the next 30 days until there is room in the flower tent 😄👍. I'm curious to see how they will recover, and I think that growth will continue in the next 48 hours 👌. I wish you a lot of fun with the update, stay healthy 🙏🏻 and let it grow ☘️🍀 You can buy this Strain at : https://sweetseeds.es/de/cream-caramel/ Type: Cream Caramel ☝️🏼 Genetics: Blue Black x Maple Leaf Indica x White Rhino 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
48
Share
@MG2009
Follow
Still on water only. Captains Cake going to mom and clone tent. Alongside sour dream. For future diary's. Switching to Budswell 0-7-0 for flowering next week.😁
Likes
13
Share
Chopped earlier than expected. I thought it was finished., I dried for a couple of days until the branches snapped without bending. Usually the good old stuff you can find from websites concerning this.
Likes
13
Share
Blühe Zkittlez Blühe Zkittlez Blühehehe Zkithehelez. Forget it. Aber gefällt mir. Die Pflanze. Und Growdiaries. Und andere Growdiaries. Und Ganja... Und BARNEYS FARM. Oh mann, wie kann man die Vergessen zu Erwähnen. Die haben mir schon ein mal das Grinsen ins Gesucht gemeißelt. Und ich weiß nicht warum, aber ich mag die Watermelon Zkittlez seid CorinnaFarm ein Growdiary gemacht hat.
Likes
6
Share
24 toneladas es un cruce de 24k x Chemdawng, una planta con un aroma más débil y un sabor denso. Su floración es un poco más larga, pero tuve que quitármela una semana antes. Cítrico y con sabor a diesel en la parte posterior de la garganta. Una planta con suficientes ramas y cogollos densos. La mantendré en la carpa
Likes
410
Share
https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND THEY WILL REACH FOR THE STARS WITH MARS🤘🤣. So it's been almost a week under the new MARS HYDRO FC4800 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. I think it might be the blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I've owned a gorilla grow tent before and MARS HYDRO TENTS are better. Don't waste the money on a gorilla tent, get a mars and save a couple hundred bucks for your fertilizers and soils👍🤜🤛I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll @marshydropenny Happy growing to all my friends 🤜🤛
Processing
Likes
6
Share
A little topping on 3 if the girls. Some low LST on a few. Pinning leaves for maximum light. The 3 I topped are coming along also. Sometimes my head starts playing with me, doubting my efforts. Only light feeding. Super light right now. Nothing on schedule. Just like to adjust according to nature so I dont disturb the peace and make things harder.. i like to go with the flow and not make issues.. only fed once this week and once last week with nutrients.
Likes
14
Share
@BatGuano
Follow
D88 - She stretched a lot and I did not intervene with her stretching that much. She doesn't even need any LST since the beginning of flowering. I am just defoliating her a little bit by taking out the leaves blocking the direct light and that's it. Pollination - Previously I harvested some male pollen from a female plant by spraying colloidal silver. This plant itself was a breed of White Rhino X AK47 (White47 I call it). Now I pollinate White 47 with AK47 again at the third week and it will have time to mature her seeds I hope. I marked the branches and turned off-the fan nearly for a day to prevent over-pollination. I took a video in case you want to create your own seeds!
Likes
8
Share
@RBG
Follow
28/10/25 Nutrients change today ( a day early ) because i didnt like how she smelt, so flushes, filled hit with 400ml sleeps then flushed, refilled and nutrients Floramax veg 1 Floramax Rezin plus Floramax flowering enhancer Floramax Organabud Green Planet vitathrive Isn cal mag Green planet massive bloom Green planet bud booster ( 30ml scoops x 4 ) Cyco platinum series silica Sleeps with the fishez ( HOCI ) Hit 4.8 e.c, changed 100L got 2.3-2.4e.c, 6.1ph. Used a lot but wanted to get rid of the Green planet line plus the ISN cal mag as im switching out to sensi cal mag Week 3 here we go! 29/10/2025 Light defoilation trying to use the scrogg net as much as possible to get as much light in as i can