Likes
Comments
Share
@Bak2Blk
Follow
The girls are still doing well! I haven't topped or LST'ed yet as I'm waiting for them to get one more node. Then I'm going to top and start the LST. Unsure if I'm actually going to do SCROG this time since I've got four plants going instead of 2 or 3 like in the past. Space is limited. We'll see though... I'm using FoxFarm Happy Frog soil and added earthworm castings to that whenever I moved the plants to the 3-gallon bags so I'm sure I won't have to properly feed until several more weeks at least from now. My last batch which was 3 Gelat.O.G autos and I didn't have to feed them until they were well into flowering. Love Happy Frog... FoxFarm all together really. I'll update whenever I decide to start the training this week. It may be tomorrow. 2/28/23: I still haven't started the LST yet, but I did top today. I was actually going to LST and top together but decided I'll give them a day or so to recover... plus, I didn't feel like getting down in the tent tonight... lolol 😍😘 3/1/23: Went ahead and started LST tonight. Let's see how this goes.
Likes
12
Share
I hope you like them !! let me know !! I accept any advice .....? according to you if I add 300w ... led roleandro full spectrum in mid-bloom can I get a few more gram? bye bye alien$c®️0g
Likes
12
Share
Plants are finishing up, maybe another week and I can wrap things up. Buds didn’t get as fat as I would have liked but everything looks really nice and frosty. cleaned up all the plants with some defoliation.
Likes
19
Share
First time grower, criticism will be well recieved😀 Two plant ebb and flow setup in a 3x3 as a test run Top feeding until I can afford the rest of my setup🙄 Started seed in water balanced to 6.0 Sat. Feb. 29th Tap roots within 12 hours, directly into pre soaked rockwool cubes. Broke the surface march 3rd. Began 1/4 strength micro, grow, bloom and stress relief Using very hard water for the next couple days, roughly 450 PM out of the tap. Ro system to be installed march 6th Ro system now installed. Start of week 1 will be Saturday the 7th of March. Day 2: Turned the light down to roughly 50%, instead of raising it, due to the fear of light burn. Will look into it soon. Plants seem to have recovered after I decreased the light intensity. Fan and filter purchased. Alternating flush and feed cycles 12 hours apart to keep salt sats down. Day 3: Bumped light intensity back up to roughly 75% of the ts1000's capability or 700 "light units" from a cheapy 3way meter. Adding as much co2 as I can through baking soda and dilute phosphoric acid. Day 4: Exhaust fan with climate control installed March 10th Day 5: Girls exploded now that I have my salt build up figured out . Day 6: Light back up to 100% Day 7:little droopy on the one plant, gonna let them dry out a day Setup should be complete for start of week 2.(actually sick right now and having trouble getting supplies) Still need a flood table setup.
Likes
55
Share
@w33dhawk
Follow
09.03.21 die Ladys machen sich gut und erholen sich schnell von dem ganzen entlauben. Mal schauen was diese Woche noch so mit sich bringt bald geht es in die blüte (so ca 2 Wochen noch). Bin Echt froh das ich bis jetzt noch keine gravierenden Fehler gemacht habe zumindest habe ich noch keine bemerkt bis auf den bei der keimung war nix besonderes los bin echt zufrieden mit der Genetik von Growers choice danke schon mal an euch
Likes
11
Share
@russrahl
Follow
Going great on these last 2 girls. Got some wind burn on the one when my oscillation decided to stick on my fan for awhile before I noticed what was going on. No biggy, live and learn. Lol still got a lot of giant buds here. There starting to look ready soon. one still needs some time but the smaller one was cut and is drying with her sister. Only one to go, she still needs a few more days and I have left it in dark for a few days to see if there will be any noticeable difference. Cheers 💨
Likes
4
Share
Likes
17
Share
Fed the plants with Fox Farm veg nutes once this week. Still a bit early to sex them but only really concerned about the two that are growing the fastest. Hopefully be able to tell in a couple weeks. The plants that were topped for the second time are recovering well and echo new site has grown sets of leaves One of the autos started flowering and the second should start in the next 2-3 days. Did slight LST to the flowering auto to get more sun to the bud sites on the bottom.
Likes
3
Share
Ya en floración avanzando bien un sutil y agradable aroma tiene y esta muy frondosa seguimos avanzando
Likes
7
Share
@gablmo
Follow
Another busy week with the vege. I gave it microbes, a HID lamp at 400 watts, sprayed for bugs and also covered the media with plastic wrap to get rid of 3 or 4 gnarts and of course a had another flood with the GoGro water system and I took one plant out of the garden because she is frozen in time. I still don't know why. The trellis is doing good. Lots of work.
Likes
7
Share
@Bud_Bunny
Follow
So frosty now. And the smelll... so stinky. Citrus and gas.
Likes
2
Share
Petty much finish, I am seeing amber trichomes..
Likes
5
Share
Bien aquí esta el día esperado la cosecha, es mi primer cultivo y considero que lo logre. En muchos medios de lectura y en especial en vídeos mencionan que no puedes esperar mucho es tu primer cultivo. En mi caso es falso y lo demuestro ya que si aprendes, investigas por cuenta y lees lo suficiente, obtendrás un alto porcentaje de que los resultados se den. Muy contento con mi plantas y sus tonos morados. Puntos a mejorar tener una carpa de cultivo y por su puesto un extractor de humedad para que baje la humedad preferiblemente a 45 grados Vendrán mejores contenidos y cosechas mas abundantes. Gracias a todos por su vistas y comentarios. Saludos y bendiciones!
Likes
61
Share
Trichome check I’ve discovered she is around 30% Amber. 🛋️🔒 Going to have to chop her down now. She sure is frosty ☃️❄️🏂 No purple in sight 👀 😬😒😪😢😭 30% amber GGGGGGGGGodaaam 🤯🤯🤯🤯🤯
Likes
9
Share
Things are moving in the right direction again. After a rough patch, the plants have stabilised and are now showing only minor deficiencies. I decided to prune the most dysfunctional growth to focus energy on healthier, actively growing tissue and improve overall photosynthesis. That seems to have helped, as new growth is coming in stronger and recovery is underway, though they’re not fully there yet. We’re back on track for now and have also transplanted into 3L pots. The next days will be about monitoring and letting them settle in. Growmie lesson: Sometimes correcting a problem means acting decisively, but recovery still takes time. Removing damaged leaves can help, as long as it’s done carefully and not rushed. Stats so far: 💧 Watering: Every third day 🌡️ Temp: 24–26°C 💦 Humidity: 65% RH 📈 VPD: ~1.18 kPa 💡 Light: ~400 PPFD
Likes
4
Share
@Ledros
Follow
Day 22 (2020-05-31): Did some additional LST and defoliation. For LST I used wire hooks pushed into the soil to encourage sideways growth of the new branches. The G14 looks a lot bushier but it did not have as many large leaves that needs to be removed. Also, due to it's mutant nature, it started with two main branches. Maybe I should have pinched one back, but it seems very healthy so far. Roots are poking out the bottom of both pots. Not sure if this is bad or not. It did not happen in my previous grow but was using 3 gal instead of 2 gal fabric pots. Day 23 (2020-06-01): Investigated the mesh cup filter I am using with the Blumats. Turns out I had it backwards and it had some slimy feeling film inside. Not sure if that is contributing to the PH rise when water sits in the tubing, but I cleaned it out and swapped it the right way. Made some small LST adjustments. Day 24 (2020-06-02): Removed a couple of blocking leaves, made some slight LST tweaks to even things out. One of the Blumats seemed like it was not dripping but bleeding the line caused it to kick in. Must have still had some residual air in the system from yesterday's filter adjustment. PH is still a bit higher coming out of the line, but is much improved. Will continue to monitor. If it stays high may try removing the filter altogether to eliminate that possibility. Day 25 (2020-06-03): Changed the reservoir out. PH was high, but still in range but the water was cloudy and had a pretty rotten smell. Going to check PH and smell daily and see if I can get a handle on what is happening. Maybe I just need to have a regular changing schedule. Day 26 (2020-06-04): PH of reservoir at 5.6. Day 27 (2020-06-05): PH of reservoir at 5.7. DId some LST adjustments and removed a few larger leaves. Noticed some light discoloration spots on a couple of the older leaves. Moved lights a bit closer (21") Day 28 (2020-06-06): Noticed some yellowing on the tips of some of the new growth. I checked the lights and they had been way closer than I thought. Moved to correct distance to see if it may have been early signs of light burn. PH of reservoir is at 6.2. Most likely will change out tomorrow. I also noticed today a bit of white fuzz mold growing on the outside of the pots and even a little bit on the surface of the coco. I am going to turn off the humidifier for a few days and get some 3% H2O2 to wipe down the outside of the pots.
Likes
33
Share
Had great results, especially when i upgraded to RO water.. if theres one thing i could of changed it would of been using the reverse Osmosis water sooner. The rest of the grow was pretty easy, didn't even plant train as this was suppose to be a hassle free run. It was just that. Some good genetics from seedstockers too. Good stuff!