Another week's in the books, and I'm slacking off on keeping track of this grow yet again. Carl 1 is developing some cal issues, which'll likely be resolved at the next watering. Timelapse is up and yada yada. Again, I'm really just waiting for the weather to turn. The tent getting this crowded isn't something I like, the leaves pressing up against the walls etc. Once the weather is nice enough for bigboi UKBS 2 and Carl 2 to go out, I'll be flipping the tent to flower provided that the other two plants are in good health and have preflowered female. Updates come as things happen. -4/9/2021 - accidentally busted a branch on UKBS 2, taped it up ASAP. Should be fine. -4/11/2021 - UKBS 2 is growing away from the light a wee bit, hopefully it'll perk back up in the near future. Ideally before the tent is overgrown and I'm forced to start hardening them early. -4/13/2021 - UKBS 2 is still being a little pissy, but Carl 2 has recovered from its issue and exploded with growth. Continuing to run out of space.

Buds are still packing on both girls. New pistils still shooting out with no orange hairs showing yet. Im thinking this is going be be a longer finish, may go to 14/15 weeks if necessary. Going out of town for work, topped up the res with adding micro and bloom.

Week 2 Flowering - day 13 of flower - day 69 of life Lemon Tree is growing amazingly. I hope it doesn’t hit the light 🤣 We are facing a heatwave where I live plant is drinking nearly 6 liters of water each 2 days. I beg she is liking the heat 😅 I hope it will fat up and get that delicious taste and flavour 🤤 Let’s go 🙏🏼🙌🏼✨

This is it! the start of the most unforgiving part of growing weed, now i have to chek my girls more than i did and wach the climate carefully as a mistake could significantly reduce potency or total yield . The smell of this strain is just beyond pleasant, sweet cirus arome fills the aire everytime i open the growbox and each time getting the same looks and same awnser , DUDE smells just like fucking lemons

This was the final week. I had no choice to harvest early because pm was starting to settle on a lot of stuff in my garden. The UV light worked for like a day or two and it came back. It's just not worth it. It turned a lot of the buds hairs brown and the leaves did suffer a little damage. Part of that was the peroxide solution. I mixed a little too strong, and it didn't seem like it hurt the plants, but after a few days, they showed the damage. It just seem to burn the leaves a little not really the bud so that's good. There was three days of rain coming, so I wanted to get it cut down.I didn't intend on harvesting so early, and I have no place to dry this because other plants drying so I was forced into freezing it. I cut down branches and wet trimmed it into a bin and ran to the freezer every 10 minutes to get it frozen right away. I maybe could've dried it and had some decent flower but I figured this would be a good opportunity to learn about making bubble hash. I decided I wanted a stainless steel mixing vessel and found this beer brewer for a good price. I think it's gonna be solid. It has a nice drain at the bottom. Then I bought some 5 gallon buckets for spacers for my 5 gallon bubble bags I use the heat gun to peel the stickers off and to heat the bottoms up to make it a little easier to cut them out with the utility knife. I used the heat gun again to soften the edges a little bit so I don't damage my bags. I can't do my washes until I'm done trimming my flowers, but I got a 2 Inkbird temperature controllers to bring my studio down to bubble hash temperatures with my ac unit. I could wait a little longer until it gets colder but I'm not sure how cold it's really gonna get and I wanna get this done soon as I can. I'm gonna have to try it without a freeze dryer so that should be fun and I'm not going to micro plane it at all costs. I got 25 µm screens for drying that I will use a towel to wear most of the moisture out then see if it on to some parchment and I should be able to get my studio really cold and dry to get it dried relatively quickly. I'm seeing it recommended to be 30 to 40% humidity and 50° or so for about a week and it should be dry enough to press some rosin. I'm gonna try to separate out the full melt hash, but honestly I think I'm just gonna get a wide spectrum pool on this hash and just press it into rosin to make it easier to deal with. I kind of was trying to find the cheapest bags it's still decent and wasn't paying attention when I bought it really cause there's no 45 µm and my set and I'm saying that to be the lowest recommended the pool but also seeing a lot of people pulling some nice 25 µm so I think with my early harvest I might have some smaller truck head so I might not be a bad thing to have that bag as my lowest. I'm going to catch everything under 160 to 25.

11/17 started flushing. Giving a half gallon of plain well water daily. Ph is typically around 7.3 to 7.6 My absolute favorite plant. The beautiful purple is so exciting. The plant grew very fast and very large, i would suggest leaving ample room for this plant. All the buds are large. Just a joy to grow.

All good flowers are coming along nicely and getting thicker. 500ml water per day 12/12, fertilization happens on Monday, Wednesday and Friday with the mix above. All good so far I just keep removing the bottom leaves that are yellowish. Fruit Tree will be the quickest to be harvested all of them are nicely maturing needs some more time. Some more weeks and we will see.

The blue dream is finishing off the bloom cycle. The plants leaves are fading evermore leaves are practically yellow. The stalk is beginning to decay. The aroma emanating from the plant has increased smells like fortified wine with a floral essence. The try chromes have covered all the flowers and are most of them are milky! The hue’s are light green. The calyxes are almost fully swollen and complete! Just waiting for the amber try chromes. The blue dream will be flushed out at the next feed. The lady stands at 93cm ta

26.4.25: The plants were watered with 3 ltrs of dechlorinated water PH'd to 6.3, containing the following nutrients:- ♡ 1/2 Tsp Sea K(elp) by Greenleaf nutrients ♡ 1/4 Tsp Ecothrive Biosys. 27.4.25: I LST'd again by adjusting the tie downs. For FastBuds Mystery seed auto #1 and RQS Northern Lights autoflower, this will probably be the last time I adjust the fabric ties, as they're now well in to flower. Keeping the canopy as even as possible. 29.4.25: FastBuds Mystery seed #1 has taken very quickly to the readjustment of the fabric ties. Within an hour, the plant had already grown back towards the light. That's always so crazy to me. I watered 3 litres 2 days ago, and I'm not going to water again until it has dried. I suspect that will be at the end of the week. The larger pots are a learning curve with trying to water adequately but not too much. I don't think that I've ever overwatered, I never water to run off. This time came uncomfortably close though Thanks for checking my diary and hanging out 💚✌️🍃😊🌱

Looks so nice... lets see what she brings in weight! ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Set up cost (fixed costs) -Lamp: 40€ -Timer: 3,5€ -Pot: 4€ -Total fixed costs: 47,5€ Given 5 years (or 15 grows) usage time translates to around 3,17€ per grow in materials. Variable costs: -Seed: free (own cross) -Soil: 4,5€ -Fertilizer: 3,50€ -Power: 15,51€ -Total variable costs: 23,05€ -Total costs per grow: 26,68€ or 1,07€/g

Day 56 of flowering of the CBD spliff Berry From Spliff Seeds Getting to the end of the line of this beautiful 2 plants she frosty she smells absolutely amazing and the only thing that is still going on is flushing and i hope i can cut here down Sunday will see i want the ppm to go lower for fine end result i am not going to cut corners on this grow it's looking and going to good for that 23/12/21 Run off was 1600 ppm so almost there 25/12/21 Runoff is around 700 ppm I will be now drying the pots out and then it's chop time for these 2 26/12/21 Day 58 flowering runoff 550 ppm 🤘🏻 There looking frosty smell absolutely 🔥🔥🔥 thricome are where i want them and has a day to go to dry out the soil and then light's out for 24 hours it was a perfect grow From beginning to end CBD SPLIFF BERRY From @spliffseeds 28/12/21 Chop chop 1 CBD spliff berry I have decided to do one wet trim and one dry trim so will be trimming first one tomorrow and goes into dry reck One left to chop good times Happy holidays people hope you have some great days stay healthy take care of the one's around yeah and let next year be more weed and Less fucking corona so i can get my ass to Alberta Canada for month vacation to see if we could move there 🤘🏻🇨🇦🤘🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

Mohawk Meds: Banana Flambe (BF): Realized 2nd Week of germination the lighting was 12/12. Explains the slow start. Now its corrected and started to grow like they should. BF #4 was having some problems breaking soil. I had to dig it completely out and it was curly Qued, growing deeper into the soil the wrong way. I probably planted tap root up. I dug it out and corrected its growth direction. Its cotyledons were present just underground. Unfortunately, between miss planting, 12/12, and digging it up BF #4 did not make it. 😞 They have had spritz of 6.0ph waterx2 each day. Will start to bottom water to get those roots to stretch. Environment is consistent 79F, 60%RH, 320-390ppfd, & 650ppm CO2.

Had to feed lots of skittlez a lot more N and a bit Mg,seems like it really needs it compared to the others. Also The New#2 got an extra dose of N and Mg. I love the smell of the skittlez,very sweet and FRUITY.

Something was causing my predator mites to eat my leaves. I added lady bugs and nematodes which solved the issue.

Flowering day 11 since time change to 12/12 h. Hey guys :-) The first days of this week it looked really terrible for me because it was much too cold because of the unusual temperature. The heating mat has now also arrived for the big tent and lo and behold the plants have been developing really well since that day ☺️👍. The temperature doesn't keep quite as well as in the small box, but at least I don't get below 18 degrees in the pots at night anymore, even though it's only 16 at the top 😅👍. Since I switched to flowering, it was time to rinse off a bit with Clean Fruits :-) . Did them a lot of good. You have already received the first watering with Grow Liquid and the next in a mix with Bloom Liquid 😀👍. Otherwise everything was cleaned and checked. Stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 A thank you for this wonderful strain goes out to Herzog https://instagram.com/herzog030?utm_medium=copy_link and the Exotic Seeds team You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. You can buy this Strain at : https://www.exoticseed.eu/ Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼

***Sponsored Grow*** = Medic || https://medicgrow.com || Grow = ***Sponsored Grow*** Not a whole lot is happening this week, still having some PH issues in the medium, I believe this is from the microbial mass I added a while back. A microbe product, PH going into the medium is around 6.5-6.8 and coming out is between 5.5-5.8, so something is acidifying it up. Also noticed the runoff last week was a bit higher at times. So lowered the feed down quite a bit, going in at 1.4EC vs 1.8 will bump it up to 1.5 and 1.6 in the next few weeks. I also added in a bit of a PK booster. nothing to crazy only 60ppm worth on a total allowance of 700PPM Lights now running at 100% with V1 spectrum, decided to go with 100% now vs after stretch, will see how it works out. Till next week. ***Sponsored Grow*** Official Website: https://medicgrow.com/ + https://www.kannabia.com/en Facebook: https://www.facebook.com/medicgrowled + https://www.facebook.com/kannabiaseed/ Twitter: https://twitter.com/medicgrow + https://twitter.com/kannabiaseeds Instagram: https://www.instagram.com/medicgrow420/ + https://www.instagram.com/kannabiaseedsint YouTube: https://www.youtube.com/channel/UCNmiY4F9z94u-8eGj7R1CSQ + https://www.youtube.com/c/KannabiaSeedCompany Growdiaries: https://growdiaries.com/grower/medicgrowled https://growdiaries.com/grow-lights/medic-grow + https://growdiaries.com/grower/kannabia https://growdiaries.com/seedbank/kannabia

Última semana de vegetación, agregamos la malla scrog para potenciar los brotes pequeños y tratar de rellenar todo el espacio!