26.12.24: I have noticed light stress on my plants. I had moved the lights further away and increased the light intensity to 70%. Unfortunately that created some issues. Namely severe palour of the leaves. To try and rectify the situation, I've dimmed the lights to about 30%, staying at the same distance, about 30 inches away. I measured the par levels, after I did this. They should a reading of anywhere between 40 and 150, at the canopy of the plants. They are all different sizes. This seems to have improved the colouring on all plants. After this evenings watering, I will monitor recovery and increase lighting intensity again slowly. I am also using the light cycle of 21/3, so the plants have many hours more light to absorb, than for example 12/12 or 18/6. 29.12.24: So I finally gave LST a shot, it's probably a bit too late, however I really want to get the most of the triploid pheno, and I went a little crazy and LST'd all plants except 2, as they're too small. I did that late last night, this afternoon I was amazed to see the plants turn their leaves back to the light source. I'm glad I overcame my fear of trying it. I'm very excited to see them adapt and progress! 😁 there are videos above with before and after of my LST process. I am pleased with the progress, considering all of my mistakes! Thanks for checking out my diary 🍃 ✌️

Gorilla Glue #4 Week 12 Changing the lighting schedule to 12 12 Some leaves and branches were damaged due to the limited space

31.12.24: I have been readjusting the LST pegs and wire daily. Sometimes, twice a day! (I know, too much time on my hands)! 😆 The plants have responded fantastically! I'm so glad I gave it a go. Some plants have been a bit too tall, and I snapped Do-sì-dos P3, pulling the stem down. Audibly snapped 😬I let it be, though. It seems to have healed mostly, in only 2 days. I have increased the lighting to 70%. They're getting watered a few times a week, with 1 litre of Dechlorinated water, containing the following nutrients and additives; 1ml of Biobizz Bio-Grow, 1ml Biobizz Top Max, 1ml of Biobizz Bloom, 2ml of cal-mag, 1g of Ecothrive Biosys. The plants are responding well to this concoction, so it's all good so far. The leaves are looking greener and are getting darker. Will be monitoring to continue readjusting the LST ties. Also, to monitor the increased lighting level, to make sure they can handle that yet. 1.1.25: Happy New Year! I have continued to readjust the LST wire and plant pegs. Several times a day. Coincidence would have it, I have a 6ft tropical aquarium which was time for cleaning! I always water my Acer tree in the front yard with this water, with beautiful results 😍 👌 🍁 I decided to try it out in my indoor garden. I'll post photos of before and after to see the difference, good or bad 😅 3.1.25: Plants are doing very well, except for PPP3 I'm quite disappointed in that one, as I feel like it's wasting a space. I guess I'll have to keep it, along with the Do-sì-dos that I snapped twice, which refuses to die 😅 I started to lightly defoliate, which is difficult because I always get carried away with it. I'm going to water again with the nutrients in description of this week. 4.1.25: Continuing to defoliate and adjust the LST pegs and wire. Watered today with 1ltr of dechlorinated water PH'd to 6.0. With the following nutrients;- 2ml Biobizz Bloom, 4ml Biobizz Bio-Grow, 2ml Cal-Mag, 2ml Ecothrive Flourish, 0.2 g/ltr of Ecothrive Biosys. I've increased the Nitrogen by adding double the amount of Biobizz Bio-Grow. I'm trying to keep them growing for as long as possible! I really want to keep the strength up and keep the leaves nice and lush green! 💚 Will update here with more photos and videos. Thanks for checking out my diary 🍃 ✌️

One plant finished very Early. The other plants are starting have amber trichomes

Added frame to keep tent from being sucked in by filter fan.

Alles gut, macht sein ding ! 😜

First grow ever so I’m learning as i go..

Black Cherry Gushers - Barney's Farm Day 102 - watered with 3L of RO tap water with nutrients, mixed individually, in order and then pH'd to 6.3. She has finished bulking her flower and is now maturing, her leaves and part of her flower have started to take on a dark purple colour indicating that she coming close to the end of her lifecycle. I have started to reduce the amount of nutrients I've been giving her, as I prepare her for harvest. I will continue to do this untill her final week, when she will be given just plain RO tap water; this is known as the flushing process. Day 104 - she's about eight to ten days from harvest; about 60% of her pistils have turned amber and her trichomes are mostly milky - so today she'll be getting her first flush! 🤘🏻 I watered her with 5L of RO tap water with just a half measure of Bio Bloom and Top Max nutrients, and then pH'd to 6.3. Her next watering, the nutrients will be halved again, and from then on, she'll only receive water.

Sanlight evo at 100% Day 64: watered today with supplements. Getting high humidity levels, so I sprayed purolyt. Will propably flush in a couple of days. Day 68: flushed yesterday. One week now and then 72 hours of darkness. She is starting to fox tail... Other than that: Looks and smells really good🤙 Get 15% Off Fast Buds with Code: FBSUMO https://2fast4buds.com/

This is exactly the 🇲🇦 morroccan 🇲🇦 way of sifting resin from kief. Traditionally, apart the hand rubbing method, dry sifting through a mesh is the most used way to obtain resin, from 🇦🇫 Afghanistan 🇦🇫 or 🇳🇵Nepalese 🇳🇵 Mountains to 🇲🇦 Morocc 🇲🇦 Rif passing through Bekaa valley in 🇱🇧Lebanon 🇱🇧. The average size of meshes used vary from 90 to 180 microns and are mostly made by silk and for this reason uneven. I think the most productive ways to sift are Dry Ice and  rotating pollinator + CO2, I've tried a DIY pollinator built by a friend and it can reach up to 20/25% of resin extracted at 120 microns and 15% at 90 microns. But smell and taste don't reach that traditionally extracted but this is another story. Morroccan way is good compromise between a stashbox or more evolute methods. It requires less than 10 dollar of expenses. You need: a basin or pot  without handles a heavy-duty plastic bag that contains the basin a pair of chopsticks a good 120 microns net an elastic band tape Kif or trim q.s. Here is the link where I buy my meshes. Very high quality, customable size and material (steel or nylon) and length and very kind vendor on AliExpress https://a.aliexpress.com/_uwfQzq Drum for 3 minutes. .....perhaps you will find that you have an innate talent as a drummer, throw the shit away and put your head right......

Hi Dear Friends, 👨‍🌾 👩‍🌾 Responded well to topping, plant is developing good and strong! ✅ VEGETATIVE week #5 📅this week goes from 12/12 to 18/12.📅 💡💡💡Viparspectra XS2000 is working at 50% power. 💉🔍Fertilization schedule:🔍💉 14/12 eposom salts 2g/l foliar and 1g/l irrigation WE ARE BACK!!! We are back after a little pause. We take a break because we were too busy to post high quality diaries. In the last diaries we tried to post as good as possible and we have to publish about 6 or 8 diaries (in addition to these that we will publish shortly). We opened also an educational Instagram page, we growed a lot in a short amount of time BUT, Instagram suspended our account and we lost all our posts, I was so sad and disappointed... a lot of work lost in a night.... Now we started a new grow with six awesome strains!!!!! In this diary you will see our journey with MOBY DICK by our friends Seeds Mafia, sit down and enjoy the show! We are growing in a 15L Smart Pot with Light Mix soil by BioBizz Moby Dick is a potent and productive strain that may reach a maximum of 21% THC. Although it may be grown indoors, it will yield the maximum results when grown outdoors thanks to its sativa genes that make it resilient to pests but also because it needs much light and lots of space to reach its full potential. Its flowering period is about 60 days, and when grown indoors it reaches the maturity in about 9 weeks and gives a harvest of 650 grams per m2. When grown outdoors, it is harvested in early October and may even reach 1000-1500 grams per plant. Speaking of the effects, it is a typical indica which produces a high level of relaxation with some mixed sativa effects that stimulate the brain. It also has intense and long-lasting effects. Speaking of the flavor, Moby Dick Feminized mixes the floral accents with the coniferous and woody ones and leaves a persisting spicy taste in the mouth. If you want to be high, you should definitely try this one! 💸💸💸💸💸 Here you can buy seeds of this top shelf strain: https://seedsmafia.com/en/feminized-cannabis-seeds/moby-dick-feminized.html?search_query=MOBY+DICK&results=2 🔧💡OUR SET UP💡🔧 ✔️ 💲💲💲VIPARSPECTRA 🚀🚀🚀🌕🌕 ViparSpectra®️ XS2000 240W Infrared Full Spectrum LED Grow Light: Excellent ratio between wattage and ppfd, excellent light penetraton, perfect light spectrum (it also has IR 🤩) and it has the best build quality on the market. Until now, built quality is really awesome. You can touch that quality. Materials are really strong, excellent driver and the best leds on the market. Heat dissipation is perfect, the lamp is never too hot and it has a passive dissipator so you will have zero noise. It also has IP65 certification. I like that this lamp is bigger than others, so the 240w of power are well distribuited on the space. Viparspectra has an awesome customer service, and shipping was creazy fast! This awesome brand also offers 3 years warranty. This lamp has no rivals. A special thanks to Emily of Viparspectra ❤️❤️❤️❤️ HERE YOU CAN BUY THIS PROFESSIONAL LIGHT: https://www.viparspectra.com/products/xs-series-xs2000 or https://amzn.to/3dyUoJl and here you can buy other awesome stuff: https://www.viparspectra.com ✔️ 💲💲💲MARSHYDRO 🚀🚀🚀🌕🌕 📦120X120 GROW TENT: an awesome box, easy and fast to assembly. Made by strong materials, solid zips and it is totally lightproof. The position of holes is optimal and the two lateral windows will make easier the work inside the box. There is also a double end, so you are 100% sure that dirt or liquids will not spill out. You can find it here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-48x48x80-1680d-4-x-4-size-keeps-all-light-in-top-quality-1680d-canvas-is-tear-proof-and-double-stitched-light-blocking-fast-installation-for-sale 💡TS 600 FULL SPECTRUM 100W LED GROW LIGHT : with this light you will achieve excellent buds, you will not need anything more. This lamp replace a 150w HPS lamp, but, with this Led Light you will smoke bigger, harder and tastier buds because Led have a complete spectrum and a powerful light penetration, so your plants will work as much as possible to make you happy. Psssssss it it extremely cheap and it is only 100w, your bills will never be too high, YOU HAVE NO EXCUSES!! Here if you want this little beast: https://www.mars-hydro.com/led-grow-light/mars-ts-series-led-grow-light/mars-tsw-600-led-full-spectrum-hydroponic-led-grow-light Thank you Eleen of Marshydro❤️❤️❤️❤️ 💣Quantum board - 480w - 4x120w Boards by Zhoangshan Koray Opto-Electronic Ltd. Samsung LM301B 288 led/board 3000K 0dB noise +24led/board led Osram 660nm Efficiency 2.6 umol/J 220 lm/w Driver: Meanwell HLG-480H-36B 💣Quantum board - 240w - 2x120w Boards by Shenzen Yuanhui Led Ltd. Samsung LM301H 504 led 3500K 0dB noise +24led/board led Osram 660nm Efficiency 2.7 umol/J 220 lm/w Driver: Meanwell HLG-240H-48B -ESTRACTION FAN: Blauberg 125 Turbo Pro Series Maximum air flow: 430-560 m³ / h 50W 32-44 dBA -FANS: A)OSCILLATING FAN D.15cm 2 speeds 20w B) COMPUTER FAN Sunon DP200A – 230V 20w (Strong, reliable and quiet) C)Cornawall Electronics Multifan Turbo, three speeds, can be used both on support surfaces and mounted on the wall. High capacity, about 740 m3 / h. High silence and reliability. 💊💉💊FEEDINGS: We used BioBizz light Mix TOP CROP: -DEEPER UNDERGROUND: to stimulate roots system -TOP VEG: for a excellent growth in the vegetative phase -GREEN EXPLOSION: to promote creation of bud sites and to allow a faster growth -MICRO VITA: bacterias for equilibrate the soil and to make the plant healty -BIG ONE: to stimulate bud sites and to stimulate resin production -TOP BLOOM: to achieve excellent big and hard buds -TOP CANDY: to feed the buds with molasses for a tastier smoke and to gain weight -TOP BUD: to enlarge buds and to gain weight PLAGRON: PK 13-14 to have big and hard buds and to feed plants with lower effort ADVANCED NUTRIENTS: Sensi Cal-Mag Extra-> for cal mag deficiency GROTEK: CAL MAG for cal mag deficiency HESI: PowerZyme to clean and balance the soil. It feeds the plant cleaning the soil. GHE: - Final Part (ex Ripen) accelerate the final flowering phase, dissolves minerals in excess - Flash Clean to flush the plant and to be sure that all excesses are out from plant and pot These two products improve A LOT the smoke of our babies -PURPINATOR to stimulate flavonoids and to have a better taste and smell. ____________________________________________________________________________________________ 🙏❤️ THANK YOU FOR BEING HERE ❤️🙏 Please leave a comment with your opinions, it is very important to us to have a comparison. If you like our job, tap the weed button and follow us. It will be really appreciated.🙏 We want to thank again everyone that help us in our project. You support us to support our dream. ❤️ SPREAD THE LOVE OF THIS PLANT ALL AROUND THE WORLD 🌿Thank you again🌿 ❤️Sweet hugs❤️ 👨‍🌾CHILLING_RACOONS👩‍🌾

This plant seems to have grown much denser and better than my first plant. I just got the ac infinity ventilation setup with controller 69 for my 2x2, still trying to learn, hopefully grow #3 goes even better. Stay tuned

GSC 4/5wk in flower COVERED IN CRYSTALS LOOK AT THE CRYSTAL DANCIN NO BOTTLES NO NUTES ALL ORGANIC COMPOST TEA N SST TEA

Legend Timestamp: 📅 EC - pH: ⚗️ Temp - Hum: 🌡️ Water: 🌊 Food: 🍗 pH Correction: 💧 Actions: 💼 Thoughts: 🧠 Events: 🚀 Media: 🎬 D: DAY, G: GERMINATION, V: VEGETATIVE, B: BLOOMING, R: RIPENING, D: DRYING, C: CURING ________________________________ 📅 D63/B01 - 17/01/24 ⚗️ EC: 0.1 pH: 7.4 🌡️ T: 23 °C H: 58% 🌊 Flushing 🍗 💧 💼 Added CO2 dispenser system 🧠 🚀 🎬 Added 1 pic ________________________________ 📅 D64/B02 - 18/01/24 ⚗️ EC: 0.9 pH: 7.2 🌡️ T: 21 °C H: 53% 🌊 Res changed 🍗 Added CalMag - Bloom A-B - B-52 - Bud Candy - Rhino Skin - Voodo Juice 💧 🧠 pH is still too high, I'm evaluating to use pH- 🚀 🎬 Added Timelapse video ________________________________ 📅 D65/B03 - 19/01/24 ⚗️ EC: 0.8 pH: 7.4 🌡️ T: 20 °C H: 45% 🌊 Added a little bit of pH- 🍗 💧 💼 LST 🧠 🚀 🎬 Added Timelapse video and 1 pic ______________________ 📅 D66/B04 - 20/01/24 ⚗️ EC: 0.8 pH: 7.4 🌡️ T: 21 °C H: 51% 🌊 🍗 💼 LST 🧠 🚀 🎬 Added Timelapse video ________________________________ 📅 D67/B05 - 21/01/24 ⚗️ EC: 1.2 pH: 7.4 🌡️ T: 21 °C H: 50% 🌊 Added 6L 🍗 Added Calmag - Bloom A-B - B52 - Bud Candy 💧 💼 🧠 🚀 🎬 Added Timelapse video and 2 pics ________________________________ 📅 D68/B06 - 22/01/24 ⚗️ EC: 1.2 pH: 5.9 🌡️ T: 21 °C H: 51% 🌊 🍗 💧 Added pH- 💼 🧠 🚀 As I would join this contest : https://growdiaries.com/giveaways/TrolMaster-Tent-X-Ultimate-Grow-Challenge I asked for a Tent-X device and they accepted to borrow it to me until the contest ends. 🎬 Added 1 pic ________________________________ 📅 D69/B07 - 23/01/24 ⚗️ EC: 1.2 pH: 5.2 🌡️ T: 22 °C H: 51% 🌊 Added 4L of water 🍗 Added Calmag - Big Bud - B52 - Bud Candy 💧 💼 🧠 pH is finally stable on the lower side (hopefully) 🚀 🎬 Added 4 pics

Definitely has some skunk genetics it’s gonna stack like a beast

This week is the last week before water flush. Today I start only with the water and in a few days, I'm going to harvest. I can't wait to test the quality of the crops.

The trichomes are starting to make themselves known On this one, also the smell is becoming a citrus like aroma which is one of my favorites, also No signs of deficiencies or anything yet so I hope it stays that way.

Day 33 of flower, growing under TSW 2000 by @polasekplants