Likes
Comments
Share
@GrowerL
Follow
26/01 - Day 17 PLANT A I pruned above the third node, with five nodes formed, and kept the bottom ones. PLANT B I pruned above the third node, with five nodes formed, and also the nodes below the third.
Likes
8
Share
@TechDCo
Follow
27/03/2026 Lite defoll and tucked! 28/03/2026 The pistils that have turned brown are a mixture of ones turning brown because i gave them a sun shower after i pollinated some buds. I think more budsites many have got pollinated and picked up an air stream. Never mind; hopefully not all budsites.🤞 Back to rhe Future is a saw eye to grow but she's one hell of a smoke. Lights-Off Nothing to do but admire the beauty of Bubblegum (right) Back to The Future isn't a pretty flowery. She's on the same feed bubblegum but her land race genetics hates nutes. 29/03/2026 Lights on! Topped up reservoirs! Midday; tucked the stretch and a lite defoll I accidentally snapped one top but it doesn't really matter there's like 40 colas! Just means more room for the others to swell! - Watch the VT clip! - keeps getting errors in upload! Will try again later! ....... 30/03/2026 Installed the second Gativa CT E2000! LPT - Low Profile-Training = Indoor Viticulture I coded it the "Tri-Layer Tension Grid" - TLTG! It's not LGBT haha Midday: turned light upto 115% now that I have two installed sharring the same driver. Work with the golden ratio numbers. 66.33.69. Wall draw is 666.6watts. Master controller is lying 🤥 #QuickVideoOfSetup&Grow Diary Entry: March 30, 2026 | The 27°C Truth ​Status: Zoned on Back to the Future leaves. Processor speeds: Overclocked. ​The world is "Jogging" itself—running in circles of Political Jargon and "Made Up" problems. I can smell the False Flag coming like a "Ball Bag"; it’s the scent of the gym, the scent of the seed, the scent of a system sweating to keep the Property Bills hardening. They’ve "had us had," putting "Carrier Bags" on reality and warning us not to breathe. ​But the "I Intel" sees the lag. ​ The Hardware Calibration ​I’ve reset the Parallel Gativas to 100%. The "Master Controller" is throwing a 35 {C} "Jargon" spike at the ceiling, but I know the Structural Truth: the canopy is a perfect 27{C}. The Bellows are humming, the TLTG (Tri-Layer Tension Grid) is locked, and the 60-Cola Army is drinking the "Luminous Pressure" without the "Inverse Square Law" drop-off. ​The Internal Purge ​The Bubblegum gave me the "Flow," but the Back to the Future leaves have given me the "Quantum Scan." Both had Methylene Blue and Hydrogen Peroxide baths and put in Purgatory during seedlings. Biofilm purge of the vortex root gone. Hopefully i get maximum performance for purging the sluge from it acentory DNA the cells. Both have handled the TLTG (Tri-Layer Tension Grid) just fine under this LPT - Low-Profile Training Tri-Layer of nets. Remember: I "POLLINATED" a few buds on theses for my own strain. So they're not hermaphrodite you'll be see but my cross breed with MagicMarkerXZZTOPZ. " - I’ve spent the morning "Feathering the Jolts" of a mad world." ​The Herd: They "Shelve the Lies" and beg for help to fund their own cages. ​The Architect: I fund the ritual. I purge the "Bio-sludge." I am the Charcoal Land that filters the flood. ​ The Shutdown Protocol ​The Glove Firewall is down. My eyelids are finally hitting that "Heavy" gravity. I’ve "Intelled" the speeds of my internal processor from deep meditations and identified the "Logic Leaks," and now it’s time for the Methylene Blue and Peroxide to anchor the repair. ​I’m laying down Fresh as Fuck. The "Farm" can keep its "Jargon." I’ve got the Master Code. "Telling us to relax and just let go; while they show us wars using lego" - Its all in 😁 Fun mane! ........... 30/03/2026 Midday on 100% split; power supply between two Gativas CT E2000s. Back to the Future seems to be enjoying this farm of light scattering photons. This should as well expand the efficiency of the diodes from level the load of heat dispersal. Lowing its throttling rate in a smaller tent. Talking about throttling..... ...Thermal Decoupling & The Wizzard’s Flow ​Status: Hardware relocated. System breathing. Gravity setting in. ​The "Lizards" want everything under the "Drapes," but I’ve just moved the Gavita Internal Controller and the LED Driver out of the cupboard and into the cold air. Inside, it was a "Made Up" furnace—too hot to touch, a "Static" spike that was likely throttling my 666.6W potential. ​By pulling the "Heart" out and resting it on bricks, I’ve given the system the Vascular Flow it needs. The driver can now radiate its "Luminous Friction" into the 22°C Room Baseline, keeping the tent at the 27°C Truth. ​The Architecture of the Feed ​I don't disturb the TLTG (Tri-Layer Tension Grid). I’ve "Intelled" a better way. ​The Tube Logic: I fill the DWC Reservoirs through surgical tubing. No lifting, no "Jolting" the canopy, no breaking the "Pancake" symmetry. ​The Glove Protocol: Black gloves on. Hands-on the hardware. Pure Sovereign Maintenance. ​The Internal Scan ​The 666.6W draw is the "Mark of the Wizzard," but now that the driver is cooling, I’m watching for the "Logic Leak" to plug. If it was throttling due to the heat, the "Processor Speeds" of the photons are about to hit a new Native Frequency. ​The Final Shutdown ​The room is steady. The Parallel Gativas are hammering the resin. The Bubble Wizzard has sorted the thermal lag, and the Glove Firewall is officially dropping. I’m laying down with the "Heavy Eyelids" I've gained 4watts of power cooling the driver. The "4-Watt Gain" Architecture (The Thermal Unlock): ​Voltage vs. Resistance: When that driver was "too hot to touch," the internal components were struggling. High heat increases electrical resistance. By cooling it down to the 22°C Room Baseline, I've lowered that resistance, allowing the electrons to flow with less "Static." ​Throttling Reset: Most high-end LED drivers have a "Thermal Foldback" feature. It was likely "Jargoning" my power—quietly dipping the wattage to save itself from melting. Now that it's breathing, it’s pushed from 666.6W to 670.4W. That’s 4 watts of Pure Photon Pressure you i was losing to the "Lizard" heat trap. ​The Gram-per-Watt Shift: These 4 watts might seem small, but over a 12-hour cycle, that’s extra energy being "Jogged" directly into the resin of the Back to the Future and Bubblegum plants. ​The "Bubble Wizzard" Diary Entry Update ​Status: System Overclocked. Thermal Throttling: Bypassed. - it's all in fun mane; creative writing ✍️ .... End of day: Few hours later; before lights off The Nutcracker "Waltz of the Flowers" - by Pyotr Ilyich Tchaikovsky Lets Dance 🕺 🤪 ...... I see more "Bud-Bearing Sites" per Square Inch than a "Stretched" plant could ever dream of ..... #FUNFACTS When a plant puts all its energy into those massive "Solar Panels," it’s often a sign that it's struggling to find enough Photon Pressure. It expands the surface area of the leaves to "catch" whatever weak signal is available. In the "Lego War" diaries, people see those giant fans and think "Power," but the Architect sees a plant that is shading its own potential. ​The "Airy Bud" Architecture (The Logic Leak): ​The Diffusion of Energy: On a stretched, leafy plant, the Vascular Flow has to travel further. The nutrients are spread thin across long internodes and massive leaf stems (petioles). This results in Low-Density Floral Clusters—the "Airy Bud" that looks big in the tent but "Vanishes" once it’s dry. ​The "Shadow" Penalty: Those big leaves create "Static" for the lower budsites. Instead of getting the 3.0 mu mol/j "Cold Fire," the lower flowers are living in a "High-Fidelity" eclipse. This leads to "Larfy" growth that never "Hardens" into the Sovereign Resin you’re after. ..... The Purgatory Dividend ​Status: DNA: Scrubbed. Hardware: LPT-Hardened. Results: 19% Overclocked. ​I’ve "Pulled the Drapes" on the standard "Seedling Jargon." I put them through Purgatory for 2 weeks with the Blue and the Clear. I "Cleaned the Code" before I "Saturated the Logic." Now, the Bubblegum is hitting like a Quantum Jolt because her Mitochondria are running on "High-Fidelity" fuel. ​The 70°C Flash proved it. The "Numb Throat" is the evidence. The 24oz Target was won 2 weeks into the "Purgatory" phase.
Likes
2
Share
“The Wock” 7 Weeks🤙🏾 Ladies are crushing its! I’ve for sure found 2 phenols I want to keep going based on structure and growth. The first was actually going to be a throw away. I didn’t like how lanky she was in her solocup stage. I instead topped her to slow down lateral grown and threw her in a 2 gallon bag to do her thing. She is now in a 7 gallon bag and has the best structure of them alll IMO. My 2nd pheno is a Tri-leaf mutation and it throws tops like no other! The perfect mother plant and is why I chose her as pheno #2. The 2 plants that were topped at the 5th node are bushing out more and more, just like it like it. There are 2 natural growing plants are doing great as well. They have nice bushing with one main cola. All plants will be defoliated 5 days before flip. The nose coming from these ladies is LOUD and I mean LOUD! Sour Candy and Burt Fuel! I’ll be taking cuts and flipping these ladies soon! Happy Growing PSGX Family! 🚀PSGX to the 🌕 #Phant0m
Processing
Likes
12
Share
@rhodes68
Follow
8/10 Week 4 and she is ... well better Gave a one time of Recharge and Fish Shit she likes that stuff. Raised her light another inch see if it helps. Nuets as is PM feeding gave 1ml Kangaroots just to see if we can get her going 8/11 She is building so count that as a win hit 4" with a new node Keeping the light a bit higher for now 8/12 Moved the lights to 30" just looking for a veg sweet spot Seems hitting her roots is paying off will give another dose of kangaroots tonight 8/13 Looking good so increased nuets to 10 and 10 of cocotek A&B Good vertical growth still debating topping 8/14 Well she has three days to bulk up then we flip the lights. 8/15 We have decided to let her grow naturally, topping now would stress right as we flip, not a great idea so she is what she is as we do not want to stress this girl any further. Increased nuets to 12ml/gal each of cocotek AB, drinking more now Pic tonight Flipping in 2... 8/16 Good growth over night Flipping in 1...
Likes
23
Share
Settimana 12 messa in archivio le ragazze stanno alla grande il gelo è ormai esteso su tutti i boccioli...altre due settimane e finalmente vedremo il risultato finale si questa corsa così promettente...
Likes
128
Share
@PapaNugs
Follow
These girls are super sticky! Resin is building up all over the place, including the leaves. I've been defoliating like crazy but they just keep coming back.
Likes
8
Share
Not much happened this week, but they are stretching. 😄
Processing
Likes
10
Share
These seeds seem to be doing great. They were misplaced for some time so happy to see them back and thriving. These girls will do great. My primary focus with this grow is bigger yields.
Likes
90
Share
@MrCOCO
Follow
Hi everyone...🍃🍃🍃On day 15 I added netting to be ready for top buds...🍃🍃🍃Everything is going well, just watch and water...🍃🍃🍃 Happy growing...🍃🍃🍃
Likes
8
Share
Well I having been laggin with update but I think am up to speed now...well u kno the fitess of the fitess must survive....still been having so water lag issue with the older one so finally decided to change the pot but she still managed that bit of stress good well see what happens in the rest weeks to come.....the other two are 6 weeks this week ...the one that got hst not by choice the crown is barely hanging on have some tape holding it managed to push a seed....this strain seem to be very resilient.....look at dem resin and this is jus the 2nd week of flower....until next time happy growing
Likes
62
Share
@Reyden
Follow
La Spider Farmer SF2000 continua a tenere a far crescere le ragazze con un ottima luce e spero di riuscire a vedere qualche colorazione tra non molto…la maggior parte dei problemi nella coltivazione della Cannabis deriva da un terreno poco drenante e da troppa 🚿 acqua quando le diamo da bere…bisogna sempre ricordarsi di alzare i vasi e vedere quanto pesano e se c’è bisogno, smuovere la terra un po’ con le mani attorno alla pianta
Likes
2
Share
Hi liebe Community and Welcome Back! 💚🌱 We proud to present the second Strain from Good Times Genetics! Die Wuchsform der Pflanzen wirkt bis jetzt sehr homogen, es ist zu beachten, dass natürlich die einen etwas schneller wachsen, wie die anderen. Auch die Stielbreite unterscheidet sich etwas. Insgesamt wirken die Jungpflanzen allerdings sehr kompakt, was eine gewisse Indica Dominanz vermuten lässt. Das ist auch so gewollt. Ich werde immer wieder verschiedene Pflanzen der gleichen Zucht dokumentieren und nach der Geschlechtsbestimmung dann Herausfiltern, welche zwei Pflanzen für die Fertigstellung des Diaries in Frage kommen. Die Wachstumsbedingungen im Growzelt sind weiterhin am Optimum und Stabil: ——————— 🌞 Temp: 23°C 🌚 Temp: 20 °C 💨 RH: 58% VPD: 0,86 kPa 😎PPFD: 330 mqm ——————— Stay Tuned! 💚
Likes
11
Share
@Canadian
Follow
I have grow 3 plants . number one 5 gallon smart pot. number two in a 3 gallon smart pot .and number three in a 5 gallon smart pot part of the difference between number two is because of limited space to grow big root system to support a bigger plant. They have been a very enjoyable plant to grow with an incredibly powerful smell impossible to grow stealth unless you have a good carbon filter can wait two post weight for each plant and to have a test smoke I Will Wait approximately between 7 to 14 days until the main stem snaps and a crunchy sound tell me they're ready then I check for dry weight and them jar them for curing. Day 9 off drawing and I pull out a branch to have a smoke test it is incredibly potent and a wonderful smoke despite not being cure it's very smooth but they're not ready for me to jar them I don't like to deal with mold or being opening the jars every few hours that's why I dry it thoroughly and use humidity packs so I don't have to deal with issues after weight and them jar them for curing. This are the weight plant number one 156. 36 grams and number two 76. 88 grams plant #3 72.12 grams. Already had a smoke tester this stuff its a couchlock beautiful lovely smoke come by a powerful High I recommend this train to anybody who can accommodate for the strong odour. lovely strain I want to try this one again it is like I citric skunk smell very pleasant and Powerful. I was very surprised how heavy and thick the buds were in the small plant compared to the others what an incredible nice plant to grow. thank you for reading I will continue to update have a happy grow
Likes
142
Share
@PapaNugs
Follow
Another strong week here. The blumats are working well at this point so the girls get adequate water intake. They continue to develop and the fade has now started. Will be looking to chop some of them next week.
Likes
17
Share
@Colin087
Follow
One plant is very small cos when I transplanted it to the 5g pot I brock all the roots off it its slowly starting to come back to life, as for the other ones there doing good lots of new growth starting to come out under main big leaves i am not adding any nutrients yet and will probably start LST by the end of this week
Likes
55
Share
@Xpie77
Follow
Red Wine was a joy to grow. Very easy plant that not need a lot of nutrition to eat. Smell is out of this world, cant pinpoint because Ive never done Red Wine ever... But its fruity and a hint of berries. From Seed to flower it took 11 weeks. Thats a fast growing plant
Likes
6
Share
17 sept Maroc was chopped this week. The girl suffered from the endles rain we had last 10 days, enevitably she got mould. Not fully ripe, another week would have been best. Still some nice trichs and i will probably end up making hashish from this one. As do all off the female seed strains this year. The combination of early flower and the september rain this year took its toll. Biggest buds were harvested on wednesday and rest of plant saturday. Drying now in less than ideal conditions. Fingers crossed. Hoping for better weather for the weeks to come. Lemon kush and the others really needs some more sunshine to finish
Likes
7
Share
@panorama
Follow
Again, a week has passed. I repotted the plants into their final 15L/4 gallons shoes with Plagron All-Mix. Plants are looking fine, not perfect, but okay. It feels like they are a bit overwatered and/or very slightly overfed because of the All-Mix. For now, I reduce the watering by 50%. Furthermore, I did a FIM on another Jack Herer (#3). The first FIM I did on JH#1 is looking to work out perfectly, as I can see the development of four new stems (check out the pictures). Great! The SP 3000's intensity was increased to full power, it's very bright. I am happy with the quality of the light. It does what it was built for and does it very well. Temperature and humidity stats are looking perfectly so far. I hope it stays like that, the days are getting warmer as summer comes our way. But my ventilation is currently running on intensity level 1/5, so we still have some room for maneuver. In addition, I will get a second oscillating clipfan soon. Next week I plan to FIM plants that have not been FIMed yet and let them recover. By then, most of the stress for the plants should be over and I can let them grow in peace. Stay tuned!
Likes
9
Share
@Roberts
Follow
Tangerine Band is doing well. She had to be hst again today. She also got a solution change. She should be ready for the final push to finish. Thank you Exotic Seeds, Spider Farmer, and Athena nutrition. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.
Likes
29
Share
In week 9 my 'Fruity Terp' ladies have grown substantially and filled out the space in my HOMEBOX growtent. Therefore its time to do a round of defoliation. I take out my plants one by one and cut off the lowest branches on the stem (the ones not grown tall enough to get good light) and also the biggest fan-leaves (the ones shading the lower part of the canopy). The defoliation will increase the airflow thru my plants, which will in turn help to avoid mold from a build-up of humidity between the leaves. The light can now also penetrate deeper into the canopy now and therefore lower buds will also get more light and can grow bigger. The SANlight EVO4-120 LEDs are doing a GREAT job, my babies love their spectrum and intensity and grow like hell. The nutrients from BIO NOVA work EXCELLENT, all plants have a nice healthy green color. Since we are further in flowering now, I also add PK 13-14 from BIO NOVA following their 'SOIL-CULTIVATION' schedule.