March 13, 2023, at 1:30 PM -I hit the plants with their first treated water on the 11th and lowered the light to 18 inches above the canopy. Today’s the 13th and it’s obvious that the plants are responding. The forum Stomper has really taken off and the blood orange haze number one appears to be lagging. Week one ends on 16 March. Later today I’ll water them with some treated water, hopefully. I’ll take a short video and a couple pictures. Reasons for the Forum Stomper’s vigor. ~ it’s in a different pot ~ it has less soil ~ it may be possible that my dogs pissed on the other three plants. 😡 March 14, 2023 at 3:30 PM -So far every day I’ve noticed the difference in the plants. They are definitely growing and developing quickly. The forum Stomper is still outgrowing the other plants. The blood orange haze number one is growing but slower than the rest. I’ll post some more pictures and a video from yesterday and today. March 15, 2023 at 1:33 PM ~ someone left the heater, near the plants, and expose them to 90° temperatures for about 12 hours. Thank goodness the plants aren’t that big because they seem to have actually liked it. I’ll throw up a couple pictures tomorrow. The plants technically are 14 days old on the 16th. March 16, 2023 at 3:27 PM ~Today’s the last day of week one. Watering them with treated water later today.

Week 18 Middle August : weather is changing. Return of heat and humidity: 28 degrees, a little bit rain. A heat wave is coming but near the ocean the maximum will be around 32 degrees. It’s good to grow in greenhouse during this period : -ventilation control: I adapted the rythme: for now it’s around 18h/24h intermittently -pests and diseases control: insect’s traps natural and artificial, less heat -humidity control: no rain problem Daylight 14h: 7h/21h Flowering time 😁. Healthy plant, beautiful green color, just a few yellow leaves on the base. More watering: 1,5L every 60 hours Same cocktail: Calmag (0,5ml/L)+ FloraGro (2ml/L), FloraMicro (2ml/L), FloraBloom (1ml/L) + Root booster + Cannazym Feeding soil with guano bat (NPK 3/6/10) for a slow dispersion + dried horn and blood (NOK 13/0/0) for nitrogen add. Protecting plant: sprayed Neem Oil, added diatomaceous earth on soil. I will make a defoliation soon.

04/11 - Both plants are coming along accordingly on time - As stated previously I got careless with the PH and they suffered a harsh PH burn - Since then they have been flushed and nutes in coco stripped - Began introducing nute in micro-dosing stages. 04/18 - Both ladies have rebounded from PH burn - They will run for about another 2 weeks in the 1 gallon pots and then be transplanted into 5 gallon pots - I have decided to "NOT" clone these and run them as pure mothers.

Today marks the beginning of the last week of flowering for my cannabis plant. After months of care and patience, I can finally see the first amber trichomes starting to form. It's a sign that the plant is nearing the perfect time for harvest. The buds are dense and frosty, and the shift in trichome color is telling me that the plant is at its peak potency. In a couple of days, I'll move the plant out of the tent and into complete darkness for 48 hours. This process is supposed to help boost resin production and make the final buds even better. After that, it’ll be time to cut her down. It's exciting to be so close to the end, and I can't wait to see how the final product turns out!🌱🌱

only 1 ft left before plant touch led panel i miss info about stretch! manque d espace reste 1 pied avant que la c99 touch mes panneau led et les panneau sont au max en hauteur jvais trouver une solution!!!!

This girl is set on hold back on flowering This girl is going too be a beast

Very happy with how this lady has performed, amazing quality buds, very sticky and dense flower with a concrete smell that I love so much, which is that kind of fruity sweet flavor that this lady is able to produce, it's been a beautiful journey, I'm gonna enjoy a lot this flowers. Very recomended guys!

IF YOU WATCH THE VIDEO YOU CAN SEE THAT I MOVED THE LAST AUTOFLOWERS INTO THIS 5X5 TENT, AND MOVED THE PHOTOPERIODS INTO THE 8X8 TENT. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

It’s day 27 from seed for all the plants in the photo sea of green. Let’s call it the battle of the strains summer 2025. All of the plants are starting to have visible differences. I’m already starting to tell witch plants are more sensitive than others.

Buding in progress ✌️

Flower day 22 now, I planted the cuts 48 days ago I’m very happy with it. Defoliation on day 20 was very tough the strain has many small leafs took me and my girlfriend 4hours😤😅

Hey everyone :-). On the 63rd day of flowering after the time change to 12/12 the harvest was carried out after 48 hours of darkness 😍. I love this black pheno 👍. After the harvest, everything was laid out on nets where it is allowed to dry at 62% for the next 8-14 days before fermenting with 62% boveda packs in glasses 😍. The entire system was cleaned immediately for the next round. I wish you all a lot of fun with the interim update and we'll see you at the end 😅👍. Stay healthy and let it grow 🍀 You can buy this Strain at : www.Zamnesia.com ☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼 Strain Gelato clone from mother (Zamnesia ) ☝️ Genetics: Wedding Cake x Gelato x Gelato 33 👍 Vega lamp: 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 Flower lamp : 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 ☝️ Grow Aero System : Growtool 0.8 ☝️ Fertilizer: Canna Aqua Vega A + B , Canna Aqua Flores A + B , Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal / Mag, Canna Ph - Grow, Canna Ph-Bloom ☝️🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with ph- to 5.2 - 5.8 💦 💧

Plants are almost done. Feeding at 400 EC. Slowly getting them ready for flush. The front right lady seems to be about a week behind but it's okay. Shell get cut last.

Bit of a difficult start to these girls seeing as this is my first grow and all, but they’re still growing and overall looking pretty healthy, good colour, springy, but I’m suspecting nute deficiency maybe but I’ve upped the food so we’ll see how we do! Now, when to start topping 🤔... Puff, puff, pass ✌️

This week is going well. They had.a BIG stretch this week that has been difficult to handle. Ended up having to sueprcrop 3 different branches in this tent. They also may be slightly under-watered. The Pineapple Express and MelonSickly are DRINKING. BG 41 and ZK are drinking a little less overall. Light is almost at the top of the tent now. I hope the stretch is over now that they have started to put on some pistils. They went through 1 heavy defoliation at the beginning of this week and it just 6 days later it doesn't even seem like I did one lol. I will have to give them another haircut around day 20. For now I am happy with the progress of this tent.