Growing

4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3.

Another flying week, it's crazy how fast life is going you guys !! But also another beautiful week for her, she is doing such a great job, her buds just keep getting fatter and I have to support them more and more. 🙏🔥🤤 so yeah nothing to complain really so happy days my friends !! 😎🙏🔥💪 Wauw ok ok I started the flush but what a disaster is this. All the branches are just to heavy, trying to support them with bamboo sticks but man this is going to be a long week flushing my friends !! ---‐---------------------------------------------------------- 1x Blue Dream - Humboldt 3x Dedovorede Haze - Humboldt -------------------------------------------------------------- Marshydro 100x100x180 tent #1 Marshydro fc3000 G-tools 125mm with fancontroller 420m3/uur Day temperature: 22.5°c - 24.0°c and 50-65 % Night temperature: 19.0°c - 21.5°c and 55-65 %

They got a higher dose of nutes and some didn’t like the bump up. Had to flush and hopefully be ok. Start em back up lol. Just a lil curling The auto purple gorilla is a beast for an autoflower!! She’s bulking up finally in week 5-6 of flower

During week 8 I accidentally snapped one of the branches whiles defoliating. It was a clean break but nearly snapped clean off. I have managed to prop and strap it up so hopefully with a bit of care she can hold on. It’s now been 5 days since it snapped and seems to still look healthy so keeping my finger crossed🤞 Other than that this girl seems to be coming on really well. She has a lot of bud sites and seems to been taking nicely to my DIY aero/hydroponic system. I’m really pleased with how she has turned out for my first ever grow and I’m looking forward to see her at harvest! Happy Growing!🌱😎

The tallest pheno is ready and being flushed for a couple of days now, rhe others are close but still consuming nutrients at a strong rate , I think they will take at least 1 more week. They smell very much like gelato as a group but are all very different from one another .

I've stopped giving them fertiliser and did a root flushing 4 days ago. They are looking good, smaller buds of what could have been with the correct equipment and dedication but I can't complain. I don't have a magnifying glass so I'm basing myself on the pistils to know when to harvest. I think I'll give them one more week but everyone is welcome to give me advice, would love to receive feedback from more experienced people.

🍋🥧🏎️ LEMON PIE AUTO BY FAST BUDS 🏎️🥧🍋 🍋 26.3... 🍋 27.3 ... 🍋 28.3 ... 🍋 29.3 ... 🍋 30.3 go on like this, yeah 🍋 31.3 🍋 1.4

Hey guys idk what’s going on my autos it seems as if the Gelato and Zkittlez has just stop growing completely I mean there’s no change at all the Zkittlez Og is starting to fill in forming nice little buds but my other autos seems like they had stop completely I know the lifespan on the Gelato is 76-80 days from seed to harvest The Zkittlez lifespan said the same 76-80 days from seed to harvest Zkittlez Og lifespan is 80-90 days from seed to harvest And I know I’m for sure March 9th marked the 60th day on all autos and I know I stress the hell out of them overwatered etc but it looks as if I might only have one plant to successfully make it yet this is my first grow and why I choose to do autos first to give me a little insight on what I’m doing but I’m going to let these girls go for a full 90 days before I decide to trash em and focus purely on my clone grows

Still waiting to see signs of sex on the photos

10/6/21 - All of the plants look really good. We are just watering when dry and LST on the tall plants. We will start nutrients after this week. 10/7/21 - Looking great! Gave them a small watering and a misting. Everything looks on point. 10/8/21 - It’s time to top one of the Lemon Kush. They all look amazing! They look very happy and are really growing nicely. 10/9/21 - They all look really good! We topped one of the Lemon Kush plants and it looks happy. The Gelato 41 are filling out. LST on the Platinum Wedding Crasher. ScrOG net was set up today! The ladies in the back are getting tall. 10/10/21 - They are really looking good. We took off a few leaves that weren’t doing well. 10/11/21 - Looking really good. Nothing new to report. Things are looking spot on with all strains. 10/12/21 - They look amazing! They have a lot of growing to do. Tomorrow I start feeding them Big Bloom.

not been a good grow. but it's ok. all part of learning process. i think the soil i used this time is not good. but one of the gals died. she sprouted late and slow growth and just never bounced back. probably overwatered as well. im not sure. but its ok. 2 of the gals doing well. another 2 just kinda slow.

Things are still on point with this lady🤗💯💚 Stretch is about to end, lets gooo😎

Iniziamo col top bloom e finiamo col top veg, i fiori iniziano ad essere tali finalmente 😍 Sono riuscito a tenerle basse, pensavo di avere problemi sotto la rete con le due davanti visti i quasi 10 cm d'altezza di differenza rispetto alle altre due, invece riesco a defogliarle bene, non ci sono foglie secche o segni di muffa e la luce e l'aria circolano bene 👍🏼💪🏼

From this point on, the plants of my two active diaries will be together in the grow with a 12x12 photo period. So I'll put the same photos in both diaries.

Nice week. Transition to center mass continues - the frost builds and the aromas are incredible. Purple berry kush - slight touch and the blast of berry kush. I showed it to a non smoker - he smelt it and said - smells like I shouldn’t be here 😂😂😂. Upcoming week will be weening off the finisher and phasing in for a full flush. Divergence on two plants in the tent as they were planted later so will keep the blooming fed.