Gave them a dose of overdrive and molasses last weekend. This weekend I'm starting the 1-2 week flush. Lots of milky trichs, with just 1-2% amber. Think another week should be good. Based on hair ratios it's about 80% orange:20% white.

These plants got off to a slow start, as I can tell by the pony tail root system. They were scrawny little plants from the get go. I believe due to a couple reasons. Colder night time temperatures in my tent and in the reservoirs, creating anthocyanins as a cold defense which has given them some color. Talk about the smell of blackberries. Did I say Blackberries! I’m not one to throw things out so I gave them some love and patience. You can tell these girls are fighters. Check out the resins drops in the second video. That's why I rated Blackberry a 10 was because of the resin drops. Can't wait to grow again, expecting larger yields.

Such a great week! One of the best weeks is seeing the colas start to develop. Makes me happy to be a grower!! This week I was playing around a little with my temps/humidity, trying to get a better understanding of VPD. I'm sure most growers on here have or are currently battling Rh fluctuations inside their grow tent. As plants age, especially during flower, they release moisture into the air causing Rh levels to increase. Also every time you feed you are adding water (moisture) into the air which in late stages typically you feed/water 1G plus each time per plant. That is a lot of water! Depending on your setup you may not be able to keep your Rh down in the mid-high 50s. With most VPD charts there are "sweet" spot ranges to keep your temps/humidity levels at for the right VPD. So in the end I have raised my temps up to 28-30 C and my humidity is now 58-65%. After adjusting my levels, I noticed a HUGE improvement in plant production and how healthier each plant looked. The Purple Kush was having deficiency issues and with it being only a week away from the start leeching (flushing), I kept feeding it as normal. Buds were looking really nice compared to the previous Purple Kush. The Moby Dick's were also starting to show signs of deficiencies. My guess is to be Potassium (P) or Phosphorous (K) deficiency but It didn't play around with the nutrients. At the end of this week, according to the Remo feeding charts, week 5 is an increase in nutrients so I just let them go. My feedings are pretty much consistent each week which is about 5 feeds each plant. I do the lift technique and when I can lift the pot with little to no effort I feed.

💚💚💚Alles Tuttifrutti 💚💚💚

Big Buds

Cogollos duros como piedra!🍇🍨

Yooo growers 🌱, Week 9 check-in! Just mixed in the Bloom nutrients from Green House Seeds and switched up the feed — 1.2L daily now. The girls are still thriving and soaking it all up. Thinking about flipping to 12/12 next week — time to bring on the bloom show! 🌸 Stay tuned, it’s about to get real 🔥 Peace ✌️✌️✌️✌️

Day 70 Well I think I will give them another week and harvest.Showing lots of trichomes that are mostly cloudy so I’ll let them go a bit longer.The tallest girl is at 40 inches and suffered some fox tailing I’m gonna say from when I pounded them with light for a week or so 😆.Even though she fox tailed and will not have the most dense buds she smells super strong and loaded with trichomes.Of the 5 Runtz the shortest has the chunkiest most dense buds.The other 3 were very big producers and took the LST great branching out forming tons of colas.Ill try to let them dry out this week and place in the dark for a day or so before chopping.Unfortunately in my area we have heavy rains all week humidity may become a problem so I will add a dehumidifier soon.

Muy contento con el resultado de esta hermosa genética llena de resina , un olor muy rico, agradable al fumar y muy potente, cumple con creces mis expectativas 👍👨‍🌾🏻🍀

Grow Diary – Day 76 (Flowering Day 61) Strain: Amnesia Core Cut (Clone) Training: Topping, LST, HST, SCROG Nutrients: • Aptus Regulator: 0.1 ml/L • CalMag: 1 ml/L • BioBloom (Dry Amendment): 60 g (applied June 26) Water: pH-adjusted RO water (final flush phase) Lighting: LED at 60% Date: August 10 ⸻ Status: Forced Harvest – Pest Pressure Too High Today marks the end of the cycle for this Amnesia Core Cut—Flower Day 61. While buds are well-developed and aromatic, pest pressure from thrips and aphids reached a level that would likely destroy the plant if left for another 2–3 weeks. To preserve quality and prevent further spread, the decision was made to harvest early and clear the space for the next run. ⸻ Harvest Condition: • Buds dense and covered in cloudy trichomes with ~15–20% amber • Aroma at peak—intense citrus-haze with earthy undertones • Sugar leaves showing late-stage fade, fan leaves largely yellowed • No visible bud rot despite pest presence • Damage from pests mostly on foliage, minimal on buds themselves ⸻ Reason for Early Harvest: • Rapid increase in thrips and aphid populations • Risk of pest spread to other plants in the grow space • Plant already in late senescence; continued flowering would add minimal weight but increase risk significantly ⸻ Post-Harvest Plan: 1. Drying in a controlled 18–20 °C, 50% RH environment with steady airflow 2. Cleaning & sanitizing grow space to remove pests before introducing new plants 3. Inspection & culling of any nearby plants showing early pest signs 4. Planning next run with improved IPM (integrated pest management) from day one ⸻ Closing Notes: While an early harvest is never ideal, the quality of the buds at this point is still high, and the loss in yield is offset by saving the rest of the grow space from a full infestation. This run provided valuable insights into pest prevention timing and senescence management in the Amnesia Core Cut.

Day 45 17/08/24 Saturday Another watering today using de-chlorinated tap water pH 6 only. Lemon skittles and XXL ammo are tall, bud nice and smelly plants! The Kabul is more of a dense compact build, I'm excited to see what they grow into 😍 Picture and video update ✌️ 💚 Day 48 20/08/24 Tuesday Feed today using de-chlorinated tap water pH 6. With Plagron PK13-14 and power buds. Noticing the stretch stop, and now packing out there bud sites 💪💚 Vid + pic update ✌️💚

*Week 4 Flower 09/24* Both Mimosa girls appear to be running fine with Mimosa (1) running a little behind but is catching up accordingly. Small oversight in early growth resulted in a minor stunt but she is improving dramatically. Water Feed has increased by half a gallon ( 1gallon clean - .5 gallon nute feed) *Week 4 Flower 09/28 - Mid week update* Both plants are flowering accordingly - Mimosa (1) is a bit taller then Mimosa (2) Buds are becoming dense and covered in trichomes. No deficiencies - No areas of concern - Potassium and Phosphate feeds continue *Week 5 Flower end of week recap - 09/30* Both Mimosa's are flowering nicely - Budsites covered in frosty trichomes. Mimosa (2) looks shorter but that is because her COLA was tied down to expose bottom budsites.

Started the flush cycle with straight water. Plants are very frosty and leaves still retain a fair amount of the green color.

Have seen a major development in mental rainbow F1 her buds are fattening up as well as the stems have notice more bud site development hopefully be more noticeable development

Videos explains it briefly how they look so on the environmental side I’ve only been monitoring RH and temps. They’ve been sitting at 55-60 RH and 80-82 F. I separated the 4 plants as they were now overlapping in the 2x2’ section. They were transplanted in 2 gallon pots last week and by the looks of the Beast at most 2 weeks and she will fill that pot no problemo. I need to get them to 5 gallons before switching to flower. It starts with good genetics I couldn’t be any happier with the Beast, still amazes me daily.

I did HST on B and put one of the branches into the centre for a better spread of the light I also took off all the under foliage from A give it some better airflow did a water change on the 26 everything is looking good to me a little burning on some leafs but light moved up now

Внезапно заканчивается цикл для PL, в конце следующей недели планирую харвест. Во-первых она уже готова(за два месяца от каски, браво FB!), во-вторых у меня закончились курительные запасы, что тоже немаловажно😜 Остальные растишки по чуть-чуть добирают, с ними точно не буду никуда спешить. Сделал забавную фотосессию на Хеллоуин, следите за обновлениями👆 p.s. добавил 👻😱🎃😁 Спасибо, что заглянули, и будьте здоровы! 🙏 Продолжение следует...😶

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 10/21/20 😻 We're documenting a day early because we'll be gone for a weekend camping trip...The plants are progressing beautifully and perpetually praying, they're absolutely loving this new MarsHydro! We decided to move the light from 24" to 30" to try widening the nodes a little before dropping back to 24", we're in unamended Promix so we typically start thinking about feed this week but being autos we're going to take it slow and wait on color ques before making that move (probably next week for sure)...thanks for reading and happy harvests everyone!! ❤️💡🌱😽💨 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~ 10/25/21 😺 We gave all plants a very, very light feeding (<3ml/gal) to see how they tolerate it, its super early but a few were already beginning to wash out ..We started bending plants today, low stress only for these girl and everything looks great so far! This MarsHydro is intense, the node spacing is extremely tight on all plants and growth has been really steady (especially these last few days), we couldn't be happier! Thanks for reading and love all around growmies!! 😻 ❤️💡🌱.. ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 30 of these lights can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_