Last week before the flush This video was actually taken at the end of the week, im pretty sure the plant on the right is very ready for harvest but the trichomes on the left plant don't have as much amber ones as I'd like. But im going to flush anyway and hope for the best Thanks for stopping by ✌️

Start of week 5 (day 1) 8/20/25 Flushed with sledgehammer: 8/21/25 Watered : 8/23/25

TRAININ DESE HOS

T- 23 days

she has a strong smell ... it takes a couple of weeks to enjoy ... she continues to fatten those buds ... a smell of mint and feels the smell of indoca to wood and earth ....

Bewässerung: 2000 ml jeden 2 Tag in der achten Woche pH-Wert: 6,3 EC-Wert: 1.9 mS/cm Temperatur: 30ºC Luftfeuchtigkeit: 55% Schädlingsbekämpfung: im Moment haben wir keine Anzeichen das es was zu bekämpfen gibt, sobald die ersten Anzeichen da sind werden wir handeln :), aber zur Sicherheit haben wir wieder ein paar Raubmilben an die Pflanzen gehenkt. PPFD: 600 µmol/m²/s DLI: 38 mol/m²/Tag Düngemittel: Sie bekommt CalMag von BioBizz zu Prävention. Ab Tag 13 haben wir angefangen sie mit einem Mineralischen NPK Dünger (NPK 10-4-7) zu Gießen. Ab Tag 39 haben wir angefangen sie mit einem Mineralischen NPK Dünger (NPK 3,5-6-6) zu Gießen, Plagron wurde auch hinzugefügt. Besonderheiten: wir versuchen bei diesem Grow Effektive Mikroorganismen aus. -Tag 49 Heute wurde sie mit mineralischen Dünger gegossen -Tag 51 wir haben ihr wieder etwas Dünger gegeben und den Runoff gemessen und er ist leicht erhöht 2.6 mS/cm 😱 -Tag 53 heute hat sie nur Wasser bekommen, wieder Runoff gemessen 0.62 mS/cm 😌 -Tag 55 Mac 1 hat heute wieder etwas Dünger bekommen, so ungefähr 3 Wochen hat sie noch

Flush week

Week 3: Since this is my first grow, I love to see how quickly the cannabis plant grows, and it's accelerating rapidly. They are thriving and healthy. This week, I used fertilizer for the first time, starting with half the amount recommended in the feeding schedule. 0,5/ml per liter.

Day 85 - Starting week 13 today and still no issues. Checked some trichs today and still quite a bit clear in there but quite a bit cloudy. Going to start flushing her for her next watering and looking at her, think she’s got about 2ish weeks left. Day 86 - All still on track for a chop in about two weeks. There’s less and less clear trichs but would like to get a good amount of amber before cutting so hopefully she’ll push them out in the next two weeks. Day 87 - Gave her 2 gallons of plain 6.5 pH’d water today to start flushing out the nutes. She’s almost all ccloudy now and hopefully start getting some amber in there in the next two weeks before chopping. Day 88 - All is going good still. Checked the trichs all over and it’s pretty much all milky and seeing a couple ambers in there. So it seems like about a week to two weeks left. Day 89 - No real update, she’s getting a bit more amber in her so almost thinking she’ll be ready to chop this weekend. Just gonna keep an eye on her and when the trichs are right, she’ll get the axe. Day 90 - Lots more amber are showing now so looks like it’ll be day 91 or 92 when I chop her. Will probably chop her on Friday but may end up doing it tomorrow. Not sure yet, depends on how I’m feeling and what she’s looking like tomorrow but definitely excited about getting her chopped, trimmed and start drying her. Day 91 - The end of week 13 and Letting the girl finish drying out today and will be chopping her tomorrow. She has some lower fluff bud but everything else is ready.

Well here we are at the harvest. I was going to run her another week or maybe two, but when four of her colas fell over and snapped I figure now would be a good time to harvest. Overall this has been a really easy and straightforward grow.

Leider hat die LM Mehltau…. Erstmal wurde defoliert und die stärker betroffenen Blätter wurden entfernt. Auf dem Video ist der Befall auch leicht zu sehen. Ich werde es aber weiterhin probieren und gehe jetzt mit Schwefel dagegen vor. Tipps sind willkommen. Das Positive: Die Petrus ist nun auch nachgezogen und wächst fleißig.

Rolling along and she is blowing up. Starting to see some pistils at a few of the nodes, so Im waiting for the stretch to begin. Once I can single out the dominant tops, I'll strip some of the lower bud sites to focus her resources on making big flowers, reducing the larfy sites and also improving airflow through the plant...every little bit helps. She still has a couple really crinkly leaves that are slower growing, which has me a little baffled, but either way, I'll continue to push her to the limits with this MegaCrop medley and I'll hit the bloom switch on the light so she can go all in for the next 50 days or so. Tell me who does more with a one gallon DWC in a 16"x16" tent... Top level savagery with these Groloponics!

Hallo und willkommen in Woche 7 der Blütephase Anfang der Woche haben wir zum letzten mal Größere Blätter und Kleinwuchs entfernt. Somit haben wir ihr Kraftnehmer genommen und geben ihr somit alle Kraft dahin wo sie benötigt wird. Nämlich in ihre Blüten. Das Blätter bzw. Blütendach befindet sich auf einer schönen recht gleichmäßigen Höhe und in der Technik/ Gestaltung, händelt sie sich zugleich sehr pflegeleicht. Sehr übersichtlich und kein übertriebenes beschneiden bzw. Entlauben. Die Calyxe prägt sich schön aus und die Buds schwellen immer mehr an. So darf es gern weitergehen 😎 Trinken tun sie im Moment nicht mehr soviel, was auch gut so ist. In diesem Sinne bis nächste Woche! Euch eine angenehme und erfolgreiche Woche gewünscht! Vielen Dank fürs vorbeischauen 🤩 MfG an alle Growmies ✌️

Smells like fresh cut grass with a hint of lemon, the smell is weak, only noticeable at max 0.5m away from the plant. Day 21: Started feeding biobizz bio-grow 0.6ml/l. Every watering I do is 500ml, every 2-3 days depending on how moist the soil is. The plant seems to be positively reacting to LST. Also, I accidentally tore one of the leaves while doing LST, but it seems to not be a problem. Day 25: Started feeding 0.6ml/L biogrow in 500ml water daily. She's starting to get thirsty. Day 26: Fed her bio-grow, and a tiny bit of CalMag. Around 0.2ml/L I think. I also watered more than I do normally, around 800ml. Update: I over watered ://

Hey now, hope everyone is having a great week, the Glueberry OG Auto is finally in full blown flower at week 8 and I believe her vertical growth is just about done at 36" which is about perfect for this setup. She may grow a couple more inches but I'm hoping not too much because I have about 16" between her and the light. She is getting straight flower nutrients now as I transitioned her slowly over this past week. She is now feeding on silica, cal mag, and GH maxibloom. I will start to add some GH PK booster later this week slowly. I use GH KoolBloom to boost the PK of the maxibloom and continue with that mixture until I start to flush her around 4-5 days before harvest. I also have the Medic Grow Spectrum X set at 100% in the F1 Flower cycle, and I am now up to 90 minutes per day of UV/IR before lights off. My PH meter got a little crazy this week, but I think I caught it in time as I didn't really see any spots on the lower leaves. If I suspect my meter is off, I just test some of my well water because it has been steady at 6.3 since I moved in like 10 years ago. I will probably do one last light defoliation in the next couple of days and that will be about it other than keeping the reservoir full and in the correct PH range. The tomatoes outside are absolutely loving the runoff from these autos, as that is all they have had to drink since they were about 3 weeks old. Thanks for stopping by, Stay Safe and Blaze On!!! 💪 Website: https://medicgrow.com/ https://growdiaries.com/grower/medicgrowled

Chopping Time

🇷🇪Le début du concours commence ici pour moi bonne chance à tous que le meilleur gagne 🇷🇪🤜🏽🤛🏽 J’ai choisi le RUNTZ MUFFIN auto de la band GANJA FAMER

This is exactly the 🇲🇦 morroccan 🇲🇦 way of sifting resin from kief. Traditionally, apart the hand rubbing method, dry sifting through a mesh is the most used way to obtain resin, from 🇦🇫 Afghanistan 🇦🇫 or 🇳🇵Nepalese 🇳🇵 Mountains to 🇲🇦 Morocc 🇲🇦 Rif passing through Bekaa valley in 🇱🇧Lebanon 🇱🇧. The average size of meshes used vary from 90 to 180 microns and are mostly made by silk and for this reason uneven. I think the most productive ways to sift are Dry Ice and  rotating pollinator + CO2, I've tried a DIY pollinator built by a friend and it can reach up to 20/25% of resin extracted at 120 microns and 15% at 90 microns. But smell and taste don't reach that traditionally extracted but this is another story. Morroccan way is good compromise between a stashbox or more evolute methods. It requires less than 10 dollar of expenses. You need: a basin or pot  without handles a heavy-duty plastic bag that contains the basin a pair of chopsticks a good 120 microns net an elastic band tape Kif or trim q.s. Here is the link where I buy my meshes. Very high quality, customable size and material (steel or nylon) and length and very kind vendor on AliExpress https://a.aliexpress.com/_uwfQzq Drum for 3 minutes. .....perhaps you will find that you have an innate talent as a drummer, throw the shit away and put your head right......

Эти девушки очень много сахара произвели за неделю и плотность бетоном очень увеличиваеться! Прекрасный рост.