Check the winners The Grow Awards 2026 🏆
Likes
Comments
Share
Week 6 flower, half way there! Buds are starting to fill in now and getting some decent frost. A couple of tops are getting more light than others, and fattening a bit more and looking real nice. It looks like there is some purple starting to come out at the tops. She is strong and will go as fast as the soil and environmental conditions will allow her to. Hand watered in Gaia Green Soluble Seaweed Extract 0-0-17, otherwise water drip is running on same schedule. Just using straight tap water that sits in a 30 gallon reservoir with a submergible water pump running 24/7 breaking surface and aerating water. Water comes out the tap @ 7ph and less than 15ppm. So I don’t do nothing to it, I drink it:) Thanks for the view 🤜 Have a great week!
Likes
1
Share
Likes
12
Share
Aug 9: Mimosa Shot is doing fine. She was slower starting than her wagon partner Sunday Punch EV, but she is liking the warmer weather. Got UV led lights from AC Infinity going today. These are designed for indoor so I can only put them out on nice weather days. Did this last year and seems to work. The UV lights make Edmonton in the fall feel more like California in the summer, or at least that’s the idea. UV is critical for trichome production so it’s a good way to boost THC percentage. Aug 14: rainy the last few days. Mimosa Shot likes to be a bit warmer. It was slower getting going in the spring, and now it seems to be suffering from a P deficiency. Reddish petioles, and a blueish tint to the leaves. She has received Power Bloom and barley just like the other plants, but still seemed to be lacking something. Ed Rosenthal’s Grower’s Handbook says P deficiency can be due to cold weather. Decided to try and dissolve 0.5 tsp of Power Bloom in 1 L of warm water to use as a high P foliar spray. As always, used a bit of Dr. Bronner’s Peppermint Soap as a surfactant, and apple cider vinegar to adjust pH. Power Bloom mostly dissolved but with some undissolved. Unfortunately I don’t have a working TDS or EC meter. Not sure how strong it was so just sprayed a bit on the fan leaves.
Likes
15
Share
@Hashy
Follow
1st week has been OK. Not really much to report on. This plant is where I would expect it to be at this stage. Fan controller set so max temp should be 26deg and max humidity 80% Day 1 did nothing Day 2 did nothing Day 3 did nothing Day 4 rigged up autofeed system and watered this weeks nutes. Day 5 autofeed this weeks nutes. Day 6 did nothing, 102ppfd 6.6 dli Day 7 increased mars ts1000 power. 157ppfd 10.2dli. Back in a week. Take it easy.
Likes
7
Share
So far the floraflex potpro system has been paying off! My time in the garden went from 90 minutes to 15 minutes and the results speak for themselves. Since theyre all still in veg im expecting some big girls. Tried to hop on the no calmag schedule but some didnt take to well to it. So i dropped my dosage back to 3gr per gal of B1 and B2. New growth looks nice and healthy on the affected plant so i might start raising the dosage
Likes
17
Share
She's looking stunning, super healthy and big on her 3rd week, I'll be transplanting her in no time, and once Transplanted we'll start to see how I train my plants, thank you so much everyone! Let's see what awaits us with this beautiful pheno of ak420 by seedstockers! 🌱💎🔝
Likes
26
Share
So I am entering week 2 of the 12/12 flip, the ladys are showing sex so hopefully later in the week I will get actual pistils so I can start counting down flower days. Day 9 seen pistils but I had to perform a major defoliation as under the canopy was bad and I didnt want powdery mildew due to leafs sweating ect. Day 10 24 hours after defoliation, you could not tell I done a thing to them, im hoping its just a odd leaf now and then thru the rest of the flowering period. Any advice is welcome guys 🙏 I will be adding more fans for airflow. Day 12 of the flip and the girls are on there way to becoming ladys lol I think there's going to be a few nice kolas in there when done, ordered the new box fan for the floor to create more airflow to reduce the risk of pm and mold. I need to top up soil as roots are showing so under the net I go again. Wish me luck.
Likes
13
Share
Processing
Likes
24
Share
@Hawkbo
Follow
Finally got my buddy to come out and add in a 20 amp outlet so I can fire up a better light. Still using quantum boards but with a 4500k spectrum. Got in a foliar with the Growzyme from green buzz liquids. Fed them right before I took the pics they look a little sad but hopefully they bounce back quickly. Not much else going on. The code bangdang will get you discounts at.. Gorillagrowtent.com Rainsciencegrowbags.com KindLEDgrowlights.com and more (see Instagram Bio for @bangdangbuds) Also check out my Instagram if your interested in entering a giveaway for a green buzz liquids starter kit including some living organics, fast plants spray and some seeds of the winner choice.
Processing
Likes
3
Share
@MMatos
Follow
Week 1 Today, I started 2 Gorilla Cookies Auto from Fastbuds. 🍪 I'll start by giving 18 hours of light and controlling the ph 6.5 without nutrients Let's see if they want to grow or not.
Likes
4
Share
@Bir7822
Follow
7-10-2025 . je commence mon rincage aujourdhui,le 9-10-2025. je prévoit de coupe rla plante en pot le 18 octobre. je surveilles les trichomes avec le microscope. il ya eut de tres grosses rafales de vent dû à la tempête... des rafales de 70,80 kmh.. une petite branche a cassé sur celle en pot. j ai coupé cette branche et nettoyé les buds pour les faire sécher... l'autre plante en pleine terre, une gross ebranche à cassé, mais hereusement pas totalement cassée... la seve passe encore dedans. les feuilles et buds ont l'air bien. pas fané ni rien. donc le 18 octobre je serai à la 8 eme semaine de floraison pour celle en pot. celle en terre à 2 semaines de retard comparé à celle en pot... je sais que c'est pas top de filmer quand il fait noir, mais c'est + impressionnant. ;-)
Likes
10
Share
Starting to see some purple on some of the leaves and I smell them every time I open up the tent . Just giving them regular ph water now and waiting for the harvest. Older leaves are also fading yellow .
Likes
9
Share
She is trying hard to keep up with the amnesia but I think she is also destined to be short and fat. The tops look primed to develop into lovely fat buds, a lot broader than the others. She is starting to get a nice minty scent to her.
Likes
4
Share
NOTE 1: Afgooey Auto pheno #3 turns out it's a MALE. Resembled nothing like her two sisters ran at the same time. In fact, I had to move her to the 12/12 tent to initiate flowering. Little did I know or expect She would be a He. Lola by the Kinks is rattling round my brain about now ;) FEEL FREE TO HIT THE LIKE BUTTON IF YOU LIKE WHAT YOU SEE ;) 2x4 French Macaron - at the time of this posting, FM is heading into week 8 flower. Second extensive flushing w/fresh rain water due to acidic conditions (ph >5). Been struggling with ph the entire flowering. I speculate ph issues due to over feeding. Ph is roughly 5.8 to 6.0 after flushing. At this point, flushing with plain RO water until harvest. NOTE 2: I've introduced two 5 gallon bubble buckets into the 2x4 grow tent. Both buckets have medium air stones running from a 125 gph air pump. Given French Macaron isn't scheduled for harvest until mid-January, I might not have cutting ready. First grow may have to be from seed. Update later. 3x3 Afgooey Autos and clones from previous grow - Afgooey #1 and #2 are firing on all cylinders. #2 running a bit acidic (>5), so flushed back to neutral with roughly 7-8 gallons of fresh rain water ph at 7.0 to 7.2. Same with clones (i.e., ph very low). Flushed with fresh rain water too. A couple days later plants look so much better. Wait till plants nearly dry before next watering. Trimmed and cleaned up three of the clones growing weird. Felt a bit like trimming a bonzai tree. Let's see how they respond.
Likes
9
Share
Likes
20
Share
Pretty happy with the grow and the harvest, the drying went well also! Each grow highlights changes for the next and this has been no different! I'll be making more training adjustments in the next runs to try and refine the vertical scrog and get to the point where it's a wall 1 bud thick! I know it will get there in the end it's just like relearning how to do a horizontal scrog! I just need to predict the way the plant will respond when the light is from the sides! Bravery and brutality during pruning I think is the key! 😂✌️💚
Likes
24
Share
@nonick123
Follow
Día 87 (26/08) Aplicación foliar de Bacillus thuringiensis a 1 g / litro para evitar a las temidas orugas de los cogollos! Hace un día nublado (29 ºC de maxima) y NO es necesario regar Elimino la malla de sombreado de la cara sur, ya que las temperaturas son más suaves después de la canicula Día 88 (27/08) Riego con 500 ml H2O pH 6,5 Empiezan a bajar las temperaturas a 29 ºC de máxima, y se nota en la demanda de agua por parte de las plantas! Día 89 (28/08) Riego con 500 ml H2O pH 6,5 Cada planta empieza a ir un poco a su marcha en la demanda de riego dependiendo de su tamaño y estado de floración Día 90 (29/08) Riego con 250 / 500 ml H2O pH 6,5 He detectado un gusano de los cogollos muerto sobre una hoja! 💥 Parece que los Bacillus thuringiensis funcionan estupendamente! 😁 Día 91 (30/08) Riego con 250 / 500 ml H2O pH 6,5 Día 92 (31/08) Riego con 1 litro H2O pH 6,5 + 25 ml de Humus de Lombriz Liquido Día 93 (01/09) Aplicación foliar Bacillus Thuringiensis No es necesario regar tras el litro de ayer y dia nublado con pequeños chubascos! 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
17
Share
I’m wondering if I should feed her a little bit of nitrogen or defoliate…time will tell. Her smell is really becoming stronger I am impressed for a week 4 of flower.