Likes
14
Share
Likes
11
Share
28/09/24 mise en pot des graines germés, elles ont toutes pris un beau 100% de réussite en pleine terre! Elles sont tranquillement dans la box à semis que j’ai construit, il me reste quelques travaux mais faut que j’attende ma perceuse pour faire les trou d’aération pour l’air extérieur et pour la ventilation que je vais relier à l’autre tente, j’aurais une ventilation pour les deux box! Faut je fasse la fixation de la lampe plus le passe de câble, terminer l’isolation lumineuse et elle sera complètement terminé! Le semis vont rester environ 3/5semaine le temps que la récolte soit termine
Likes
13
Share
@buzbun
Follow
Its good growing plant,good cloning its all from 1 freebie seed!On flowering they stretching 2x maybe more im not expect it but all good.think need more Silica for plant like that for more strong stems
Likes
3
Share
@CalGonJim
Follow
4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3.
Likes
9
Share
Ihr Stamm ist sehr schnell fest geworden,was das LST des Haupt triebes etwas erschwert.Ansonsten macht sie gute Fortschritte,wenn man bedenkt dass es momentan noch max 17 Grad celsius und 80 Prozent Luftfeuchte sind.Dies sollte sich jedoch in der nächsten Woche regeln,da es dann wärmer wird und ich die schlitze des Zeltes dann aufmachen kann,ohne dass es darin zu kalt wird. Ihr Topf ist schon gut durchwurzelt und wahrscheinlich benötigt sie bald einen größeren,jedoch lasse ich sie ersteinmal wachsen und nehme in einer Woche ein paar stecklinge. Diese Genetik ist echt der Hammer,sie hat einen Ultra dicken stamm für ihre größe und bildet an einem Seitentriebe noch einen zusätzlichen Mini Trieb aus.Aus diesem Grund nehme ich mir von ihr einige Stecklinge und versuche die Genetik als Mutterpflanze zu halten.
Likes
21
Share
One week down looking they're very good I can see a lot trikos on the got a new camera coming the smell is seeking out having hard time try stay stealth I belive starting to stay on my clothes my whole house 😷
Likes
18
Share
The whole grow was full of ups and downs I neglected her basic needs from the get go but she did recover and push along with me.. the growing conditions were not prime and fir that she did me proud .. The buds are tight and have a very nice smell to them .. If I had grown this lady in a bigger pit with warmer temps she would have been amazing ... I'm excited to try her again sometime in the spring hopefully .. the buds I tried a little but of were not bad tasted smooth and cash was white when burned ..
Likes
15
Share
~ FASTBUDS TESTER #2201 ~ Well friends, here we go on another 'canna-venture' together! The grow room has had a complete remodel and some upgrades done to it including brand spanking new 4x8 and 4x4 tents and a Trolmaster Hydro X controller along with a new Control Panel. This tester strain is one of six tester strains that FastBuds has graciously provided me with and I'm looking forward to seeing what this girl has to offer when she's grown to her full potential! One drawback of 'testers' is I have little to no information on it other than its number and that it's an autoflower... 🤪 But, it's ALWAYS a blast growing them for me because not knowing a lot allows me to just concentrate on the essentials: Light, Environment, Water, Nutrients and possibly a bit of LST... not complicated, just basics like keeping a constant temperature and RH in the tent at a level that gives a good VPD, watering when almost dry and maintaining proper light levels according to their stage of growth. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~THE SETUP~ ~Initially seeds were lightly scuffed, then soaked for 3 hours in 78℉ distilled water after which they were transferred to moist paper towels laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Mars Hydro Heat Mat with Controller that was set to 78℉ where they stayed until their tap roots emerged. ~Planted into Jiffy Peat Pellets that were hydrated with distilled water warmed to 78℉ with a 7.0 ph. ~Once roots emerge from the Jiffy Pellet they're transferred to their fabric pots. ~Grown 100% organic in a 4g Gronest fabric pot and a 3g fabric pot by Wraxly filled with Mother Earth 70/30 Coco/Perlite medium and initially amended with Dr. Earth 4-4-4 / Earthworm Castings / Dr. Earth Flower Girl 3-9-4 and Coast of Maine Stonington Blend Organic Plant Food 5-2-4. ~19/5 light cycle for the entire run with supplemental UVA added during flower. Lights are controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. ~Top dressing every 3-4 weeks with slow release dry amendments and Earthworm castings. ~Straight water ph'd @ 6.2-6.8 when needed and bi-weekly Compost Tea's. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 1/19- Here we go into Week Four of flower and these testers are ON FIRE!🔥🔥🔥 Both testers are in a flower frenzy and are ready to eat! Today I gave both girls their last top dressing with Down To Earth 4-8-4 Flower Mix at a ratio of 2tbsp/g and Coast of Maine's Stonington Blend 5-2-4 Organic Plant Food at a ratio of 1tbsp/g which I simplified by using 1/3 cup of the 4-8-4 and 1/4 cup of the 5-2-4 in the 4g pot and 3/8 cup of 4-8-4 and 1/8 cup of the 5-2-4 in the 3g pot. After working the amendments into the medium, I watered it in with 1g of straight de-chlorinated water ph'd to 6.6 @ 74℉. It will take a week for the microbes to begin breaking it down and will last for 3-4 weeks after that which should coincide with them finishing up, or close to it, enabling them to naturally 'flush' themselves out. I've also increased the power to the HLG 650R's the the Trolmaster Hydro X Controller to 75% which has them pulling 990w at the wall and have them hung 32" above canopy. I also starting adding in 4 hours of UVA during the middle of the light cycle for the remainder of flower. I've been monitoring their leaf temperatures and they're running 71-73℉ which is perfect! I have the AutoPilot APC8200 co2 Controller set to 1100ppm with a 100ppm window and the AC Infinity Cloudline T6 controller set to maintain a 74℉ temperature in the tent while the lights are on. 1/21- I'm watering her daily with straight de-chlorinated water ph'd it to 6.6 @ 74℉ and she stays in a perpetual state of 'praying'.... a VERY happy girl she is! 1/23- I watered/fed today with 0.75g of de-chlorinated water with GreenGro's Natures Brix, Granular Myco and Flower Finisher mixed in, after which I added 1 tsp/g of unsulfured molasses and then ph'd it to 6.6 @ 74℉. 1/25- Daily watering continued today with 0.75g of straight de-chlorinated water ph'd to 6.6 @ 74℉. She's looking fantastic and I'm really looking forward to Week Five of flower where she should really start to strut her stuff! 😍💚 😎💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Much love 💚 and Grow Strong! 💪😎🤙
Likes
3
Share
Likes
13
Share
Dropped light hours down to 16 . Topped off nutrient solution with 5.0 ph evened out .removed none chosen phenos to be flowered in separate room no longer tracking those we will only follow the chosen mothers clones i cut clones today as well had the lady friend clean floor with bleach and dawn put clones in ez cloner 32 systems
Likes
23
Share
Day 78🌱🙂🍊 This lady is doing her great job, Buda are increasing rapidly 🌱 difference between top flower and bottom is evident. For this reason I’m quite sure I’m going to cut in two times, around 85/87 days I’ll cut the high part of biggest bud and around day 95 the rest of the plant. Day 80🌱🌱🌱🙂🍊 I’m going to go up to 90/95 days, smell now is really strong 👃🌱🤣 I keep giving some water when is really dry because some parts of the plant still needs it. Day 81 🌱🌱🌱🌱🙂🍊 Hi all fellows, today a big defoliation cleaning to improve light in the bottom Part of the plant before harvest. I tought to harvest in like 10 days but as I have some water yesterday I noticed that she’s been quite not drinking anymore. I’ll give another 2/3 days before harvest. I will be perfectly in 85 days from seeding. Smell is crazy now, I can smell cotton, orange, chocolate, pinus.. can’t wait to try it. Let’s see! ANY SUGGESTION IS REALLY WELCOME 🌱🌱🌱🌱🌱🌱🌱🏆🏆🏆🏆😊😊😊😊
Likes
1
Share
Estamos en la semana de transición del periodo vegetativo al periodo de floración. Nuestras plantas ya tienen un tamaño correcto para poder pasar de 18h de luz a 12h... De esta forma iniciamos dicho periodo. Hemos conectado tres equipos led LazerLite Pro 720w ajustados al 50% de su potencia. Repartimos bien todas las plantas para que reciban luz de forma homogénea. Regamos, esta vez solo con agua, para no tener exceso de fertilización, ya que nuestro sustrato es muy rico en nutrientes.
Likes
2
Share
@EtnoGrow
Follow
this is the beginning of the 4th week along with the publication of the end of the 3rd week, this is how the fourth week is received, another intensive pruning that has no choice but to do it due to the size of the indoor, which is working great for us and we believe that I will always work like this, I am happy, here then the pruning of its results a little before and after and how it is receiving this fourth week, with the threads I touch a little bit of hair I hope it does not affect much but all in favor of opening the field to all the branch buds alike.WE CHANGE THE MESH FOR A BETTER ONE AND OF THE IDEAL SIZE AND AGAIN WE USE THREADS THAT HELP US VERY WELL, WONDERFULLY
Likes
29
Share
Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Flowering day 22 since time change to 12/12 h Hey guys :-) The stretch is in full swing and it continues to develop beautifully :-). The GBL fertilizer does exactly the job it should 👍. Organic more PK will be added in the coming days. It was poured 3 times this week (for nutrients, see table above). The lowest shoots have been removed so that the energy reaches the upper area completely :-). Otherwise, as always, the lady was checked for her health and the tent was cleaned. I wish you all a lot of fun with the update this week. Stay healthy 🙏🏻 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. You can buy this Strain at : https://www.amsterdamgenetics.com/product/kosher-tangie-kush/ Type: Kosher Tangie Kush ☝️🏼 Genetics: Kosher Kush X Tangie 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + Nutrients : Green Buzz Liquids : Organic Grow Liquid Organic Bloom Liquid Organic more PK More Roots Fast Buds Humic Acid Plus Growzyme Big Fruits Clean Fruits Cal / Mag Organic Ph - Pulver ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8
Likes
32
Share
25.02. Day 73. Blüte 32. Hallo Leute. So ein Gewächs ist was schönes. Oben wirds purple (Lichtstress denke ich). Ansonsten alles gut soweit. Also für meine Verhältnisse. 26.02. D, und heute leaf coat genutzt. Plus ich glaube die ist genetik purple.. 27.02. Leute nicht vergessen, ist ne automatische. Vielleicht deswegen purple. Auf jeden Fall wird es mehr.
Likes
14
Share
The little plant is growing without much addition.... I germinated a Gorilla Glue 4 seed in a glass of water at 21 degrees celcius for 24 hours then put it in a pot. It will keep its cousin company. If all goes well I intend at the end of the Gorilla Glue Auto harvest to change the light schedule to 12h 12h so that Gorilla Glue 4 will be in bloom. Will I have problems with the light?! We will see!
Likes
6
Share
@Yeyup
Follow
First week so far so good 🌱 Planted and lighty watered for first 2 days when soil was dry 27/11 the 5th day since being planted I fed her 1.5 ml of canna terra vega following the food chart that came with the food 28/11 all still seems good didn’t need to water 29/11 lightly watered 30/11 gave her a bit more water she’s getting bigger and looking good
Likes
15
Share
@Growshh
Follow
Flipped the lights to 12-12! After a few days of tucking I took the vid.
Likes
81
Share
Things are going pretty well. 🙂 I am just about to start flushing. Buds are swelling up and getting denser every day. Getting close to the finish line. 😎 I'll update throughout the week.
Likes
8
Share