Day 57 and I have decided to go another two weeks roughly to advance maturity and Bud size I've been talking with other Growers and they seem to be in consensus that even though I'm close to the actual Harvest Time listed on the website for this plant it is not mature enough quite yet and I can get quite a bit more out of it. That being said here we go. Quite a bit has changed today I introduced a new way of watering my plants more frequently whatever happened to worry about spillage as a result my plant is sitting slightly higher off the ground as I built a platform for it so the water drips from the pot into the catcher and I can remove the catcher without touching the pot. I also have changed the way my lighting is set up. I'm sure that some of my other grow pictures show the lighting the way it was the new way should be much more efficient at covering the area and kind of just really cleaning everything up. My hope is that some have you may find these things useful possibly for your own tent grows. As always if you have any questions feel free to drop them below happy growing Day 59 as you will see in the pic there are almost no amber trichomes its a good thing i am continuing to grow this girl. you may have noticed a lack of heavy trichomes ( i know i did ) i think its just the strain as this is the second plant to be like this my LSD, Ayahuasca purple and church had far more trichomes on the leafs but im not complaining she smells great and i bet she will taste great and give a good high as well Day 62 im starting to get more amber trichomes and you can really tell that she is sucking up the nutes in the leafs also going forward i will start a new way of feeding because i tested the run off today and its at 2466 ppm and thats to much on the high side for me. so now im going to put 2 L of straight tap water and then 2 L of nute mix every day and test to see how things are going. If i dont notice a good drop i will do 3 L of water and keep going up from there. at this point there is not real risk to the plant and it will help me on the next grow that i will be starting right after this Day 63 so i noticed a drop in the ppm its now 2276 a drop of almost 200 ppm in 1 day so not to bad. i would like it a bit faster so im going to up it to 3 L water and 2 L nutes thats all for now

I made a new sewing solution for the Candy Bubatz. I didn't use enough CalMg. Now I mixed the water with CalMg to an EC of 0.4 and then added all the other nutrients. I'm at an EC of 1.3 just like Canna says. I added more Rhizotonic because the roots aren't that mature yet.👽

Finally in full flower mode. Ready to start putting on some serious size. I turned the lights up to 80% a couple days ago and they both are taking it well. No light burn yet that I notice. I'm not sure if I should start bringing the lights closer at 80% or keep the distance but instead Increase power to 90%. Going to feel it out as we go. Happy so far for sure. Update: increased light to 100% . No lead burns or weird looking leaves yet.. Just bulking up and very thirsty! Doing a nutrient/nutrient/water feeding schedule now.

Hello people week # 8 at the start. I fertilize 3 more times this week with a liter of water (6.5ph). Hope this week she finally develops the colas a bit. I had a little mildew problem last week, but defoliation resolved the issue. It fits perfectly into the season from the look hope dan to get good gifts. Therefore I will start my flush in week 9. I'm curious what will happen in the next few weeks. Thank you for your time. A fox does what a fuschs has to do. 🦊🦊💚💛❤️

LSD Zamnesia Tripping 🙂 | Fresh Frozen, Ice Water & Temple Balls — Week 16 From Seed First of all… Yes 😄 We are once again dividing the harvest reports into multiple chapters, and once again we apologize for that. But honestly, there was simply no way to fit: * harvest, * drying, * trimming, * curing, * smoke review, * macro photography, * fresh frozen work, * washing, * extraction, * and hash making… …into a single GrowDiaries update without rushing through important parts of the process. And this part? This part deserved its own spotlight completely. Because this week was not about flower anymore. This week was about resin. Living resin. Fresh frozen material. Ice water extraction. Patience. Cold temperatures. Sticky hands. And slowly transforming trichomes into beautiful hash. For everyone joining only now, quick recap: These LSD girls were grown under 12/12 from seed from the very beginning. Minimal training, mostly natural structure, gentle leaf manipulation, and environmental balance instead of aggressive intervention. Part of the harvest was dried traditionally and already covered in the previous report. But another part… …never got dried at all. Straight during harvest, selected flowers were removed fresh from the plants and immediately vacuum sealed before going directly into the freezer. No drying. No curing. No waiting. Fresh frozen. And that changes everything. The goal here is preservation. When flowers are frozen immediately after harvest, a large portion of the volatile compounds: * terpenes, * flavonoids, * aromatic compounds, * and delicate resin characteristics… …can remain much closer to their living state compared to traditionally dried material. This is why fresh frozen extraction became so respected in modern hash making. It captures a version of the plant that only exists for a very short moment in time. Alive. Wet. Fresh. Fully expressed. And honestly? Opening those frozen bags weeks later felt like reopening harvest day itself 😄 The flowers still looked incredibly resinous even after sitting frozen for weeks waiting for wash day. Now let’s talk process. For the wash itself, we used the Bubbleator machine courtesy of Zamnesia , and honestly huge thanks to them for providing it. They knew I wanted to start exploring ice water extraction properly, and they were kind enough to support the journey. The setup itself is actually beautifully simple. First: ice. Lots of ice 😄 The machine was filled partially with ice first before adding the fresh frozen material inside the working bag. The flowers themselves were placed inside a closed 220-micron washing bag. This is important because the bag keeps the plant material contained while still allowing the trichome heads to separate during agitation. After placing the material inside: * more ice on top, * cold water added, * everything submerged, * and then… …we waited. Around 30 minutes or so. And this step is actually extremely important. A lot of people think washing starts when the machine turns on. But honestly? The wash starts before that. This resting phase allows the frozen material to: * slowly rehydrate, * absorb water again, * become fully saturated, * and most importantly… * become extremely cold throughout the entire plant material. Why does this matter? Because trichomes become brittle at very cold temperatures. The colder everything gets: * the easier the resin heads separate, * the cleaner the release becomes, * and the less physical force is required. That is also why ice exists under and above the material: * lower temperatures evenly, * protect the resin, * and maintain the cold environment throughout the wash. Once the water temperature approached near freezing… …the machine came alive 😄 And honestly? Watching the water slowly transform during the wash is always magical. At first: just ice, water, and flowers. Then slowly: foam, cloudiness, resin separation, and finally that beautiful milky golden water hash makers love seeing appear. Meanwhile on the side, we prepared the filter bags. We did not use every single micron separation individually because honestly sometimes over-separating becomes unnecessary depending on goals and material quality. Instead, we focused on collecting the grades we actually wanted to work with and enjoy. And then came one of the most satisfying parts of the entire process: Collection 😄 Slowly lifting the bags. Watching the resin gather. Carefully scraping. Separating grades. Observing texture and color differences. Beautiful creamy resin everywhere. Some lighter. Some slightly darker. Some sandy. Some greasy. Every layer carrying slightly different characteristics. After collection, the resin was carefully freeze-dried. And this part also requires patience. First freeze drying. Then breaking it apart. Then more drying. Then more waiting 😄 Depending on environment and conditions, full drying can take several days because trapped moisture inside hash is dangerous long term. Rushing this step can ruin months of work later. In this case, the process stretched closer to about a week before everything felt properly stable and ready to work. And honestly… This is where the magic really started. Once dry enough, we allowed the hash to rest briefly before beginning the hand-working process. No extreme heat. No giant pressure. No fancy machinery. Just: room temperature, body warmth, gentle pressure, folding, rolling, stretching, and patience. The room itself stayed around 15°C, which turned out to be perfect for working the resin slowly without overheating it. And this step matters far more than many people realize. When hand-working hash properly: * oils redistribute, * compounds begin merging, * terpenes spread through the material, * oxidation starts slowly, * texture evolves, * and curing begins transforming the resin itself over time. You are not simply “rolling hash.” You are starting a living curing process. And slowly… The texture changed completely. From sandy loose resin… to creamy material… to sticky dough… to smooth beautiful temple balls. Honestly, seeing that transformation happen in your hands never gets old 😄 Final result? Three temple balls total: * two smaller ones from smaller micron collections, * and one large main temple ball that became the true star of the session. Final weight: 46.5 grams.( big one ) And honestly? I was extremely happy with that result. Especially considering the quality, texture, color, and how beautifully this LSD washed overall. Once formed, the temple balls were wrapped carefully in parchment paper before being vacuum sealed for long-term curing. And now? They rest. Months. Maybe longer. Waiting. Because the goal here is not “fresh hash.” The goal is evolution. Traditional temple ball style curing allows: * oils to redistribute, * compounds to merge, * texture to transform, * aroma to deepen, * and the entire resin profile to mature over time. Almost like aging wine. Or curing cheese. Or fermenting traditional products slowly and intentionally. This is medicine with patience built into the process. And honestly… That part alone deserves respect. We also included: * detailed process photos, * collection stages, * macro photography, * texture closeups, * curing progression, * and multiple stacked macro images showing the resin in insane detail. Some of these stacks reached: * 62 frames, * 87 frames, * 114 frames, * and even 152-frame focus stacks. Because honestly, hash under macro magnification becomes another universe completely. The textures stop looking real. Tiny resin mountains. Oil rivers. Micro-crystals. Glossy surfaces. Soft creamy structures. It almost starts looking geological instead of botanical 😄 Mr. Baggy of course supervised the entire operation like the professional resin inspector he clearly believes he is. And next week… The final chapter arrives. Smoke review. Curing review. Flower review. Hash review. Terpene evolution. Effects. Textures. Lessons learned. Mistakes made. And final thoughts after this entire LSD journey from seed to cured medicine. And finally… Thank you. To Zamnesia for the genetics and the Bubbleator. To Plagron. To F.O.G. To all the LEDs, gear, and equipment involved. To GrowDiaries. To the community. To the OG followers. To the new curious visitors. To the silent supporters. To the skeptics. To the lovers and even the haters 😄 To everyone spending time sharing this strange beautiful plant journey with us. Wishing everyone: cold water, sticky fingers, healthy plants, beautiful resin, and enough patience to let good hash become great hash 🌱

Week 26 Sweet Love is ready for harvest. Part of Spicy CBD plant 1 is also ready. Spicy CBD plant 2 is a few weeks away. Plants are developing differently on different parts. I think I may explain it a little better with a video. Temperature is back to normal hot with humid air. Humidity and VPD: Hottest part of the day during the week; 34 degree C, Humidity 64%, VPD 1.9 Coolest part of the night during the week; 24 degree C, Humidity 73%, VPD 0.8 62 days of flowering for Spicy CBD plant 1. One branch looks ready. And is dripping wet. However, trichome is still clear and just start to get cloudy. And I have started to trim off the bigger fan leaves. I think next week will be a good time to harvest for this branch. Another branch still looks like it has a few more weeks to go. 50 days of flowering for Sweet Love. Sweet Love is small. The buds looks fluffy and light. Does not look like she would yield much. The smell is very much green mango with a hint of pepper spice. Pulled off fan leaves. On some part, trichome is ready. On most of the plant, buds are ready. I'll throw away the part that is not ready. I don't think they'll do much any more. And Sweet Love is in the shadow of Spicy CBD. 50 days of flowering for Spicy CBD plant 2. One branch looks good. A few more weeks for buds to ripen. The other branch is still young with hardly any flower. Light Feeding with yoghurt and molasses to encourage potency. A dose of light compost tea and another dose of potassium salt to help ripen flower. Bugs and mold are in check. VPD is down a bit but I don’t see a need to spray anti-mold microbes with such fluffy buds. Feeding summary Monday evening – Compost tea ( 1.5 ml / liter compost tea + 1.5 ml/liter humic acid). Tuesday evening – Yoghurt ratio ( 1 liter yoghurt to 5 liter of water) Wednesday evening – Molasses ( 2.5 ml / liter). Thursday – none Friday evening. 1.5 ml/liter compost, 0.5 gram / liter potassium salt, 0.5 ml cal mag.

Mar 31st Week 16 Mar 30th changed nutrients First 2 days will be straight Dense Bud Compactor @ 900-1000 ppm I use 1 gram / litre On April 1st I will add all other nutrients to the existing solution and check ppm level is not to strong April 1st Changed nutrients from straight Dense Bud Compactor to a full nutrient mix I used 8 litres of fresh water + 6 litres of the Dense Bud solution to make a mixer that is @ 1100 ppm

Hello growers, Day 28 of 12/12 Due to the temperature drop outside watering every 2 days now. Around 15 in morning then back up to 24 after an hour with light on. Other than that, nothing else to report. Merry Christmas 🎄

47th Parallel Crowly's Comet 🔹⊱╮🔹╰⊰🔹 GROW Started 03.10.24 INFORMATION 🔹╰⊰´🔹⊱╮🔹 🌞Environment - Maintaining 80F and 65%Humidity 🌾Training - Nothing this week, just letting the seedlings veg out. ⚱️3-Gallon 📊6.2 PH 💧 Feeding - Using Horti Grow 8-11-21, Bloom 5-15-26, Late Bloom 0-24-26, Cal 12-0-0 🌞Medic Grow Smart 8 760 Watts 🕷️ IPM - CannControl from Mammoth and Mosquito Bits as needed 🔹⊱╮🔹╰⊰🔹 PLANT UPDATES 🔹╰⊰´🔹⊱╮🔹 📝 Notes - These girls are killing it; they are ready to push into flower! 📝Fertigation injects fertilizers into an irrigation system to supply dissolved nutrients to crops. 🗓️04.13.24 Today fed with Hort-Grow @ 3.3 GRMS Per Gal, and Horti-Cal @ 2.5 GRMS Per Gal. 🗓️04.14.24 Started the Fertigation 2x daily this morning, feeding a little less at a time but making up for it with the additional feeding. 🗓️04.15.24 Today fed with Hort-Grow @ 3.3 GRMS Per Gal, and Horti-Cal @ 2.5 GRMS Per Gal. 🗓️04.16.24 Today fed with Hort-Grow @ 3.3 GRMS Per Gal, and Horti-Cal @ 2.5 GRMS Per Gal. 🗓️04.17.24 Today fed with Hort-Grow @ 3.3 GRMS Per Gal, and Horti-Cal @ 2.5 GRMS Per Gal. 🗓️04.18.24 Today fed with Hort-Grow @ 3.3 GRMS Per Gal, and Horti-Cal @ 2.5 GRMS Per Gal. 🗓️04.19.24 Today, fed with Hort-Grow @ 3.3 GRMS Per Gal and Horti-Cal @ 2.5 GRMS Per Gal. I also did light defoliation because tomorrow, on 420, they are flipped into flower. ╰⊰🔹╰⊰´🔹⊱╮🔹╰⊰🔹╰⊰🔹STRAIN INFORMATION🔹⊱╮🔹╰⊰🔹╰⊰🔹╰⊰🔹⊱╮ Crowley's Comet / https://www.47thgenetics.com/product-page/crowley-s-comet-10-fem-birdseeds It's everyone's favorite piece of space rock, Crowley's Comet! The culmination of reversing our Matterhorn cut off Mr. Crowley to Intergalactic Runtz, and the results were out of this world (I had to do it). These ladies were slow to start, but once they hit their stride, they put any worries we had to rest. Compact, short-framed, and robust. They pack beautifully boulder-like flowers that reek of garlic and sickly sweet cotton candy. Dark green to a mosaic of purples, yellows, and silvers. Frost production is off the charts, the internode spacing is tight, and they certainly will impress in their last few weeks of flower. This is one of our favorite crosses in the new fem lineup. If you're looking for your hype fix, here you go. Yield: Heavy to XL Flower Time: 63 days Feeding Schedule: Heavy

Defoliation took all fan leafs off left 3 on top of each main branch Added sonic bloom

Elle a tous vécu plantation tardive dernière semaine de juin , météo pourrie, chenille ect.. et à fini en indoor

Shes getting bigger 😄 weather is also slowly gettin better👨🏽‍🌾 she is a little bit younger as my Zkittelz plant, but i think she is a Little Bit Slower as the Zkittelz. Maybe too much Stress.

Seedsman White Widow. I accidentally killed my first seedling as a sprout by getting it wet right as it was sprouting. Live and learn. Here we go again and she's off to a much better start this time. 👍 My Perpetual Harvest strategy…. Originally my plan was to start 2 seeds each month, but had some seeds from one breeder that did not germinate early in my rotation. Ultimately, this caused single seeds to pop and messed up my 2 at a time plans. But, that seemed to work out OK, because now I think starting one seed every 3 weeks is a better strategy. This should provide me with 4-5 plants at a time, instead of 6. However… Since I need to shut down over the summer because my tent is currently in the attic, I’m starting 2-3 seeds at at time for the last couple of rounds. Plants get fed once weekly on weekends. Seedlings get water only. Plants in vegetation get water and Recharge. Flowering plants get water, Recharge or Big Bloom (Fox Farm). Feeding is done using 2 gallon watering can. Any additional waterings during the week are given on an as needed basis per plant. I lift the plants to help determine which plants are more dry (lighter) and provide water any plants via water bottles and watering spikes. I give each pot a quarter turn every day in an effort to make sure the plants get equal lighting from all sides. I rotate the plant in place by turning the pot 90 degrees (I am not rearranging the layout of the plants in the tent on a daily basis). The soil is an ‘organic super soil’ I mixed myself using organic top soil, organic potting soil, organic compost, organic peat moss, organic perlite, organic vermiculite, lime, epsom salt, expanded clay pellets and Jobe’s organic fast start. I am also recycling my soil and water with Recharge when using recycled soil. For plant training I have tried a variety of things, but my plans now are to do LST bending only, no HST anymore. I may decide to go back to HST again in the future, but I’m curious to compare LST training only to see how that goes. Around week 3 I'll do a FIM pinch once there are 4-5 nodes established. And some defoliation around the 3rd week of flowering. I have been doing HST bending and having good results, but think the HST may be causing the plants to take longer to harvest. I hope FIM/defoliation only will help increase harvests while getting me to harvest sooner. Setup: 1- Grow Tent 24”x48”x72” 2- Viparspectra 300W LED’s (1-V300 & 1-R300) 1- Hanging 100w CFL (26w actual) 1- Carbon Filter w/ 190cfm Fan & 4” ducts 1- 6” clip-on fan 1- 700w electric heater - oil filled radiator (in front of air intake behind tent)

Starting running into problem with gnats during flowering but I've adjust the fans and temperature increased to calm the precipitation in the tent. The 3 seeds I germ'd & planted in 1pot that mistake cost me 2 well rooted ladies leaving me 2:6 (2Ws 4Ls) of successful STILL growing plants. All in all I'm getting good with this. Tweeking and creating self methods learning frm this community have turn'd me good looking & promising yields.

Sour Jealousy Auto FastBuds 2025 Outside Grow Week 7 May 11-17 FLOWER 1 Sour Jealousy has started to flower. She is 18” now after a 6-inch spurt. She really benefitted from last week’s rain. This week’s weather has been cloudy and sunny but the temps ranged from 93 high and low of 53 at night. I watered and fed 2x with Kelp 30 ml/g and TPS1 4ml/g. I included some garden pics and some cool boats. I live in a coastal area with 6 bridges. Since maritime law still governs commerce, the boats have the right of way to vehicles. On this day I got stopped by the bridge opening and was close enough to see the boats. A parade were luxury yachts. Your likes and comments are appreciated. Thanks for stopping by. Growers love 💚🌿 💫Natrona💫

4° SEMANA - LAS PLANTAS SIGUEN CON EL MISMO PLAN NUTRICIONAL - NO SE VEN CARENCIAS NI EXCESOS - el hps de 600 MANTIENE MI AMBIENTE SIN MAYORES INCONVENIENTES - LAS PLANTAS PREPARANDO YA SU PROX. PASO A FLORACIÓN - EN ESTA SEMANA Y EN LOS ÚLTIMOS DÍAS DE LA SEMANA SE LE APLICO DEFOLIACIÓN Y PODA DE BAJOS

6/10/25 starting week 2 of flowering and this plant is stacking hard already and praying very beautifully. i have high hopes for these genetics. hoping i dont regret not taking clones of this.

Everything is as beautiful as ever :-) the rear ones are already in full flower production, the front ones are just beginning. None shows deficiencies or an excess of nutrients :-) everything looks perfect, and every one of them reacted super topping :-)

This bugger neatly drank 3L of the solution I had prepared for three weeks!! there some serious growth happening. Defoliation was a good idea at this point to reduce the amount of wasted nutrients and increase the flowering priority. Had to share the last "video" to show my appreciation in learning about LST here on growdiaries, those are pepper plants.