Likes
Comments
Share
The plants are on the final stretch in flower. I’m still working on getting the calmag up to make the ladies look nicer. Overall I’m happy with these aircubes. The ladies grow extremely fast in them.
Likes
Comments
Share
@Growshh
Follow
Day 39 since Seed pop. The topping worked, gonna be challenge to have a balanced yield. Might have more blueberry cherry than black patronus as it's growing at a faster rate!
Likes
28
Share
* ********* Week 11 - June 20 to 26, 2020 - Days 71 to 77 from germination *********** * It is the end of flush week and she went into darkness on Wednesday night, day 75, for two days. Saturday will be harvest day and start and the dry process👍 This week she continued to fill in and she also pushed out more frosty tricombs!! The fade happened this week more and she fed off of more of the nutrients within the plant.....perfect😃......would like a little more even but she was ready based on tricombs. Would like to have seen the lower leaves a little more yellow but its good. I am feeling very strongly that the big part of the pH issues this run was a change in feed water. I have always used bottled RO water for all my grows, except outdoors, but this grow I switched to tap water. Dechlorinated the water with air stone and gave it 24 hours min before using. Wanted to save some money and tired of lugging bottles downstairs a couple of times a week☹️ This is worked out nicely and a lot more convenient. However, the city must be putting some crap in the water that is causing issues in my media and raises the pH after the watering. Out of the tap it is 8.4pH and 275ppm. Since ppm were not too bad in my opinion I moved forward without filtering the water.......oops🤬🤬🤬 Out of options on what is causing the issue, I switched back to RO water late last week........all the girls are happier!!!! F......missed the cause for weeks. Always learning from this plant and my own mistakes to get better every run😉👍 Also wanted to add a little more stress to girl to help push out some increased resin. I drilled a 5/16” hole into the main stem to cause her stress. I did this rather than trying to break a branch and will see it goes this run. Sterilized a new bit in Alcohol and went for it. They went into darkness about a couple of hours later. Excited to see what happens when she comes out to get chopped😃😃 Not really a lot more to add this week as it was mainly looking at the tricombs and her buds. The pH will impact the harvest but she has been fun to grow and very resilient to pest and bug issues as well as grower curve balls. As always.......nice job Sweet Seeds....... SWS56 is very solid and I look forward to running her again one day. Beautiful little girl and makes me smile😃😃😃 Little more detail...... June 20/20 - Day 71 - Rezin and Liquid Weight @ 2ml/L = 285ppm and 4.0pH - 8L given to get a good flush....pH still running around 7.4 - Runoff in pots already were 7.9pH and 685ppm. - after 8L water runoff was 7.4pH and 360ppm. - she is 20” tall and 24” wide. - a number of clear tricombs but more becoming cloudy. June 21/20 - Day 72 - dry out day. - buds are firming up......squeezed a couple🧐 June 22/20 - Day 73 - Rezin @ 1ml/L = 120ppm and pH the water to 2.7!!!!!!!!! - Given 2L watering. - No runoff water and I am good with that as I want the low pH water to stay in the medium. - her frost levels are really coming out now.....was able to lower tent temps to 75 degrees and 51% humidity......its been raining a bit so damn humidity has been high. June 23/20 - Day 74 - 2L plain water feed - 80ppm and pH to 2.4!!!!!! - not excited about these crazy low pH numbers but doing what we can - her tops are getting more pointy now and ripening nicely - leaves continue to fade......she is close - checking tricombs, I think we are done and tomorrow will be her last day so that I can take down on Saturday. June 24/20 - Day 75 - 2L plain water feed - 80ppm and pH to 3.0 - Going into darkness tonight so this was her last bit of moisture. - drilled a hole into the stem.....was going to do a couple of holes but not trying this method before I decided to leave it with one hole. - into darkness tonight So we finish up the week with her in the dark. Next update will be the harvest!! Thanks very much for taking the time to review my diary!! Sorry for running behind often on this run.........everyone has had a busy life the last couple of months in the world and its been no different here...........a huge Kudos to all the Growmie‘s that are able to keep up with their diaries on daily basis on GrowDiaries.......its a commitment😃👍👍 Sweet Seeds girls are very solid genetics with great vigour and resilience.......this strain is no different........great job Sweet Seeds🙏
Likes
47
Share
2nd net is up. Early bud formations are promising. holding up to the extremes pretty well, some leaves taking minor damage, but overall, she is holding up, gave her 1 night at 50F see how she would react, stressful. Not advised as it messes with her metabolism, but I want to see if it triggers any anthocyanin response. Love to see her purp up but no signs yet. Remember, For every molecule of glucose produced during photosynthesis, a plant needs to split six molecules of water. This process provides the hydrogen needed for synthesizing glucose and other organic compounds, while oxygen is released as a byproduct. Homework. If Rubisco activity is impaired and it cannot properly function or regenerate its substrate, the plant's leaves are likely to turn a pale green or lime green, a condition known as chlorosis. Essentially, Rubisco activity is highly regulated and susceptible to various environmental and metabolic factors that can cause it to become inhibited, leading to an apparent failure in RuBP regeneration due to a lack of consumption. Rubisco regeneration is intrinsically linked to nitrogen supply because Rubisco is a major sink for nitrogen in plants, typically accounting for 15% to over 25% of total leaf nitrogen. The regeneration phase itself consumes nitrogen through the synthesis of the Rubisco enzyme and associated proteins (like Rubisco activase), and overall nitrogen status heavily influences the efficiency of RuBP regeneration. RuBisCO is a very large enzyme that constitutes a significant proportion (up to 50%) of leaf soluble protein and requires large investments in nitrogen. Insufficient nitrogen supply limits the plant's ability to produce adequate amounts of RuBisCO, thereby limiting the overall capacity for photosynthesis and carbon fixation. Maintaining the optimal, slightly alkaline pH is crucial for the proper function and regeneration of Rubisco. Deviations in either direction (too high or too low) disrupt the enzyme's structure, activation state, and interaction with its substrates, leading to decreased activity and impaired RuBP regeneration. (Lime/yellowing) Structural Component: Nitrogen is an essential building block for all proteins, and the sheer abundance of the Rubisco protein makes it the single largest storage of nitrogen in the leaf. Synthesis and Activity: Adequate nitrogen supply is crucial for the synthesis and maintenance of sufficient Rubisco enzyme and Rubisco activase (Rca), the regulatory protein responsible for maintaining Rubisco's active state. Nitrogen deficiency leads to a decrease in the content and activity of both Rubisco and Rca, which in turn limits the maximum carboxylation rate, Vmax, and the rate of RuBP regeneration Jmax, thus reducing overall photosynthetic capacity. Nitrogen Storage and Remobilization: Rubisco can act as a temporary nitrogen storage protein, which is degraded to remobilize nitrogen to other growing parts of the plant, especially under conditions of nitrogen deficiency or senescence. Nitrogen Use Efficiency (NUE): The allocation of nitrogen to Rubisco is a key determinant of a plant's photosynthetic nitrogen use efficiency (PNUE). In high-nitrogen conditions, plants may accumulate a surplus of Rubisco, which may not be fully activated, leading to a lower PNUE. Optimizing the amount and activity of Rubisco relative to nitrogen availability is a target for improving crop NUE. Photorespiration and Nitrogen Metabolism: Nitrogen metabolism is also linked to the photorespiration pathway (which competes with carboxylation at the Rubisco active site), particularly in the reassimilation of ammonia released during the process. To increase RuBisCO regeneration, which refers to the process of forming the CO2 acceptor molecule Ribulose-1,5-bisphosphate (RuBP) during photosynthesis, the primary methods involve optimizing the levels and activity of Rubisco activase (Rca) and enhancing the performance of other Calvin-Benson-Bassham (CBB) cycle enzymes. Biochemical and Environmental Approaches: Optimize Rubisco Activase (Rca) activity: Rca is a crucial chaperone protein that removes inhibitory sugar phosphates, such as CA1P (2-carboxy-D-arabinitol 1-phosphate), from the Rubisco active site, thus maintaining its catalytic competence. •Ensure optimal light conditions: Rca is light-activated via the chloroplast's redox status. Adequate light intensity ensures Rca can effectively maintain Rubisco in its active, carbamylated state. •Maintain optimal temperature: Rca is highly temperature-sensitive and can become unstable at moderately high temperatures (e.g., above 35°C/95F° in many C3 plants), which decreases its ability to activate Rubisco. Maintaining temperatures within the optimal range for a specific plant species is important. •Optimize Mg2+ concentration: Mg2+ is a key cofactor for both Rubisco carbamylation and Rca activity. In the light, Mg2+ concentration in the chloroplast stroma increases, promoting activation. •Manage ATP/ADP ratio: Rca activity depends on ATP hydrolysis and is inhibited by ADP. Conditions that maintain a high ATP/ADP ratio in the chloroplast stroma favor Rca activity. Enhance Calvin-Benson-Bassham (CBB) cycle enzyme activity: The overall rate of RuBP regeneration can be limited by other enzymes in the cycle. •Increase SBPase activity: Sedoheptulose-1,7-bisphosphatase (SBPase) is a key regulatory enzyme in the regeneration pathway, and increasing its activity can enhance RuBP regeneration and overall photosynthesis. •Optimize other enzymes: Overexpression of other CBB cycle enzymes such as fructose-1,6-bisphosphate aldolase (FBA) and triose phosphate isomerase (TPI) can also help to balance the metabolic flux and improve RuBP regeneration capacity. Magnesium ions, Mg2+, are specifically required for Rubisco activation because the cation plays a critical structural and chemical role in forming the active site: A specific lysine residue in the active site must be carbamylated by a CO2 molecule to activate the enzyme. The resulting negatively charged carbamyl group then facilitates the binding of the positively charged Mg2+ion. While other divalent metal ions like Mn2+ can bind to Rubisco, they alter the enzyme's substrate specificity and lead to dramatically lower activity or a higher rate of the non-productive oxygenation reaction compared to Mg2+, making them biologically unfavorable in the context of efficient carbon fixation. The concentration of Mg2+ in the chloroplast stroma naturally increases in the light due to ion potential balancing during ATP synthesis, providing a physiological mechanism to ensure the enzyme is activated when photosynthesis is possible. At the center of the porphyrin ring, nestled within its nitrogen atoms, is a Magnesium ion (Mg2+). This magnesium ion is crucial for the function of chlorophyll, and without it, the pigment cannot effectively capture and transfer light energy. Mg acts as a cofactor: Mg2+ binds to Rubisco after an activator CO2 molecule, forming a catalytically competent complex (Enzyme-CO2-Mg2+). High light + CO2) increases demand: Under high light (60 DLI is a very high intensity, potentially saturating) and high CO2, the plant's capacity for photosynthesis is high, and thus the demand for activated Rubisco and the necessary Mg2+ cofactor increases. Mg deficiency becomes limiting: If Mg2+ is deficient under these conditions, the higher levels of Rubisco and Rubisco activase produced cannot be fully activated, leading to lower photosynthetic rates and potential photo-oxidative damage. Optimal range: Studies show that adequate Mg2+ application can enhance Rubisco activation and stabilize net photosynthetic rates under stress conditions, but the required concentration is specific to the experimental setup. Monitoring is key: The most effective approach in a controlled environment is to monitor the plant's physiological responses e.g., leaf Mg2+ concentration, photosynthetic rate, Rubisco activation state, and adjust the nutrient solution/fertilizer to maintain adequate levels, rather than supplementing a fixed "extra" amount. In practice, this means ensuring that Mg2+ is not a limiting factor in the plant's standard nutrient solution when pushing the limits with high light and CO2. Applying Mg2+ through foliar spray is beneficial to Rubisco regeneration, particularly in alleviating the negative effects of magnesium (Mg) deficiency and high-temperature stress (HTS). While Mg can be leached from soil, within the plant it is considered a mobile nutrient, particularly in the phloem. Foliar-applied Mg is quickly absorbed by the leaves and can be translocate to other plant parts, including new growth and sink organs. Foliar application of: NATURES VERY OWN MgSO4 @ 15.0g L-1 in a spray bottle. For those high-intensity workouts when 1 meal a day is just not enough! Foliar sprays are often recommended as a rapid rescue measure for existing deficiencies or as a supplement during critical growth stages, when demand for Mg is high. Application in the early morning or late evening can improve absorption and prevent leaf burn. The plant was getting a little limey yellow in the centre. Shortly thereafter, she was back in business, green mostly regenerated. The starting point [of creativity] is curiosity: pondering why the default exists in the first place. We’re driven to question defaults when we experience vuja de, the opposite of déjà vu. Déjà vu occurs when we encounter something new, but it feels as if we’ve seen it before. Vuja de is the reverse—we face something familiar, but we see it with a fresh perspective that enables us to gain new insights into old problems. Confidence is evidence... nothing more. You are confident because you have driven 10,000 times, you are confident because you have spoken 10,000 times. People think confidence is a feeling, but it's not. If you want more confidence, then you need to create evidence, take more shots, collect more data, build more experiences, take more risks; fail, confidence doesn't come first; it is the reward you get for doing the work. no one else wants to do.
Likes
17
Share
@Hashy
Follow
Harvest report for green crack. Breaking ground to harvest was 103 days. Wet weight was 378 grams Dry weight =52g Power used for 14 weeks 5days. 288Kw used on lighting. £86.40at £0.30 a watt. Average 2.79 kw a day 139 Watts power an hour. Dry weight from this grow. #1 49g #2 37g #3 46g #4 39g #5 51g #6 52g Total 273g True g/W 273÷139=1.96g/W This was one great grow and there are a few strains I'm really considering running again straight away. I'm impressed this one made it to harvest after all the neglect. One thing I have learnt during this grow is that the idea of cramming 9 autos into my tent was a stupid idea and trialling it with 6 plants was wise.
Likes
62
Share
Defoiled and lolipoped some more Canopy is very even this time and alot of budsites were growing over the extended vegetation period...sadly they're still 2+ weeks behind schedule due to overwatering in the early stages Now 8 weeks vegetation instead of 6... Added the sanlight Q3WL & the ProEmit UVA...the UVA will be on for 2h/day...will raise it to 5h over the next 3 weeks Switched to 12/12 on friday afternoon
Likes
4
Share
The plants are doing super well under nearly perfect conditions. Unfortunately I didn't have so many pictures
Likes
32
Share
@Sejnik
Follow
Dnes jsem s nimi byl u kadeřníka a odstranil jsem velké množství vějířovitých listů aby se světlo dostal i na spodní květy. Zároveň jsem tím chtěl podpořit proudění vzduchu protože jsem v jednom vrchním květu objevil plíseň šedou. Příští vikend to vidím na sklizeň 🙂
Likes
46
Share
They are still not too happy with me... Not liking the nutrient strength I choose again.. So after 24hrs of just ph water and 1/4 strength hydroguard. No change I thought they would appreciate just water and a root stimulate. But no change in root or plant mass. Looking like they are very stunted from nutrient burn. So moving forward I went with same strength as the 1st feeding that they liked. But I did it in a hurry before work and realized after the fact that I put that same amount I put before but didn't account for lowering the water level to 3.5 gal from 4gal. So end up being slightly stronger then before. I did add 0.5ml of hydroguard to each bucket. Also added 0.5 of bud candy to each bucket. But hoping they work with me fingers crossed. 4/12/2023 5.8/72°F/221(Left rear) 5.8/72°F/227(Middle front) 5.8/72°F/214(right rear) No sign of transitioning to flower yet. 4/14/23 Colorado Cookies recovered and jumped like a inch looking alot better! Overall Height 3.5" And I noticed that there was some growth in the root zone. But noticed there is something going on with the upper leafs. Runtz Seems to be recovering but still a little rough. Overall Height 2" But I did notice the roots mass did not change and they still appear to have the brown tint and seems to have gotten slightly worse toward the bottom of 6"net basket. I believe that's contributing to the slow recovery. Still looking alot better tho. Banana Purple Punch seems to have bearly changed at all. There's very slight growth in center. No change to root mass at all. Overall Height 1.5" Found some very helpful information on measuring EC instead of ppm and how to monitor EC and Ph. So will be doing this moving forward. I'm going to redo Banana's bucket to exactly what I gave the 1st time she was happy but this time accounting for the .5 gal change in water level. I'm also looking into if I can use the hydroguard at full strength on nutrient burned autos since its not a nutrient for the plant. But I need to fight the brown roots in runtz tonight. See if I can't get all three happy! And save this grow to a more acceptable outcome. Stats 4/14/2023 6.25Ph/72°F/222ppm(runtz) 6.33Ph/72°F/218ppm(banana) 6.28Ph/72°F/215ppm Cookies I added 1ml total hydroguard to all and added .05 total calmag to all and ph to 5.8 4/15 I changed the water on all buckets. raised the water level back to 4 gal on Banana since it has the smallest root mass. And put full strength hydroguard and full strength rapid start in all buckets amd ph to 5.8 and left it for 24 hrs. I made a floral spray of armor si at 0.33ml to full spray bottle. Wet em down good. Twice today. 4/16 I noticed Banana's leaf tips began to droup a little. So lowered water back to 3.5 gal and mixed the nutrients for 3 gal to be safe and leave ppm for cal mag and bud candy without nutrient burn. Added 0.5 cal mag and 0.5 bud candy. I trimmed all the burned leaf tips off, so I can see if and when it burns again. And since it was the best my test has looked yet I took a video and some pictures. But still need to figure out whats going on with Colorado cookies. Has spotty yellowing. Thought maybe light burn. So checked and raised like a inch or so. But there leafs below that are almost fully yellow. Like nutrient deficiency. Trying to read her but not getting it yet. gavw them a spray of armor si. 4/17 ph to 5.8 bucket stats. Sprayed with armor si 6.1/74°F/200ppm/425uscm/0.85EC(Runtz) 6.3/72°F/207ppm/440uscm/0.88EC(Banana) 6.0/74°F/210ppm/446uscm/0.89EC(cookies) Thinking about LST cookies and pull top down. But want to address the yellowing 1st. 4/18 I changed the water in buckets to just water with 50ml hydrogen peroxide 3% to 3.5 gal water and left it for 3 hrs. During this 3 hrs I turned both fans off and made a foliar spray with 0.30 ml gh flora trio and 0.25 cal mag and sprayed them down and turned the light off for 3 hrs. So after the 3 hrs peroxide treatment. I changed water out with fresh water and did my nutrient differently. I got the EC of my tap water whixh was between 0.19 and 0.23 between the buckets. Then I added cal mag to 0.5EC And added nutrients base and additions to a EC of 1.0. Then I added 4ml hydroguard to 3.5gal. And ph to 5.8 Banana 0.19EC 3.5ml cal mag 3ml GH Flora Trio 1.5ml Bud Candy 1.5ml Rapid Start 0.25ml GH Flora Macro 4ml Hydroguard 7.4ph 242ppm 517uscm 1.0 EC Cookies 0.23 EC 3.1ml cal mag 3.1ml GH Flora Trio 1.5ml Bud Candy 1.5ml Rapid Start 0.40ml GH Flora Macro 0.42ml GH Flora Gro 0.25ml GH Bloom 4ml Hydroguard Ph 7.3 235ppm 500uscm 1.0EC Runtz 0.22EC 3.2ml Cal mag 3ml GH Flora Trio 1.5ml Bud Candy 1.5ml Rapid Start 0.25ml GH Flora Macro 0.40ml GH Flora Gro 0.25ml GH Flora Bloom 4ml Hydroguard 7.4ph 235ppm 500uscm Ph all to 5.8 That was last night at 11:30pm This morning at 5:20am stats 4/19/2023 5.9/74°F/238ppm/506uscm/1.0 EC(Runtz) 5.9/73°F/232ppm/493uscm/0.98 EC(Banana) 6.0/74°F/232ppm/493uscm/0.98EC(Cookies) Ph To 5.8
Likes
125
Share
🍊 🍋 🍮 🍭 🍊 🍋 🍮 🍭 🍊 🍋 🍮 🍭 🍊 🍋 🍮 🍭 Welcome to week 7, dear friends!! 😘 DAY 42 Moved to a new tent wih a new LED 💡 DAY 44 Watered with 2ml A+B und 0,7ml C4 + vitalize and enzym+ +2ml calmag 💧 Topdressing with Vitabrix DAY 46 Watered with 2,5ml A+B und 1ml C4 + vitalize + 2ml calmag + enzym+ 💧 DAY 48 Watered with 3ml Bigfruits + Humics + 2ml calmag + vitalize + epsom 💧 Watered with nematodes. 🐛 Thanks, everybody!! 💚 💚 💚 Grower love!!! 😘🙏 🌱 _________________________________________________________________________________ SETUP: 80x80x180 cm Zelsius 240W Full Spectrum LED IR UV dimmable DW240H-A6-HS Heatsink color red LED Chips: 512pcs SAMSUNG LM301H + 24pcs Osram 660nm + 8pcs Osram IR 730nm + 8pcs UV 385nm Color mix: 2700K + 4000K 2,8umol/J Driver HLG-240H-C2100B Coverage: veg 5x3ft / flower 4x2ft Product size: 628x205x68mm Green Buzz Nutrients Shouts go out to my sponsors @GreenBuzzNutrients, thanks so much for your support! ❤️ If anyone would like to try their amazing organic products, use code GD42025 for generous 25% discount (for orders of minimum 75€) ✨ https://greenbuzznutrients.com/ Mills Nutrients Biobizz Lightmix custom exhaust fan 320/270cm³/h Carbon Active Granulate 240cm³/h tab water pH 8 - EC 0,25 with Calmag to 0,5 Advanced Hydroponics pH minus Grow + Bloom to pH 6.2 🍊 🍋 🍮 🍭 🍊 🍋 🍮 🍭 🍊 🍋 🍮 🍭 🍊 🍋 🍮 🍭
Likes
Comments
Share
2nd week of flowering and the girls are doing well.
Likes
1
Share
Dopo la bella defogliata ho notato un po di carenza.. ho aggiunto 1 ml in piu per litro di big bud (pkbooster) vediamo in questi giorni di colmare questa carenza... per il resto sono bellissime ancora devono ingrossare un bel po.. sicuramente altre 3 settimane almeno.
Likes
1
Share
Def worth the grow, took a good bit longer than expected though that is for sure.
Likes
7
Share
@B4nkz
Follow
Checked out the trichomes yesterday, just to be sure, I think they’re 2-4 weeks away from harvest. This week I also fed them and slightly defoliated some leaves that were blocking light on some buds.
Likes
209
Share
@BioBuds
Follow
This week we encountered some problems and we lost a couple of days of growth. It was smooth sailing up to here and maybe a little too smooth. I saw that the buds didn't develop right after the previous post last week. After dropping a question and establishing possible reasons I did some interventions to let the plants recover. I raised the light which was real close and temps were too high. Next to that I watered with just some normal tapwater as I suspected some too low PH. I started ventilating more to disperse the heat a little. These actions seemed to have helped as last couple of days I see some real fattening of the buds. This SP-3000 is real powerful and cant be as close as my previous leds. Again props to Mars Hydro and a big thank you to @MarsHydroLED!! Let's hope we do the last couple of weeks with less stress for all of us! Sorry for not posting any Sunshine posts, I have a Christmas surprise in store for those enjoying the mixed reality shots. For those who didn't like it, it will be the last you'll see of her, so she'll say goodbye at the same time! Thank you for following and all the likes, everybody! Take care and stay safe!! Hug Bud
Likes
4
Share
@SamDo
Follow
Vegetative Week 7 – Pineapple Upside Down (Round 2) This week confirms a very good recovery following last week’s defoliation and pruning. As shown in the photos, the plant bounced back quickly and shows strong vegetative vigor. Leaf mass has rebuilt nicely, and overall growth looks healthy and well-balanced. There are no signs of stress or slowdown at this stage. After the structural work, light intensity was temporarily reduced to avoid additional stress. Now that the plant is clearly responding well, light power has been increased again to around 50%, corresponding to roughly 150 watts in full-spectrum. For now, the plan is to let the plant continue growing and building strength. The four main branches that were previously selected need a bit more growth before starting any low-stress training. Once they elongate further, light LST will be applied to begin shaping the plant’s final structure. A move to a larger grow space is planned later, but there is no urgency at this stage. Overall, everything is stable and progressing well. See you next week. Take care.
Likes
12
Share
@D33jW
Follow
Week 12 – Day 88 / FLO 58 BOX: 80x80 - lamp 250W 🌞 Temp: 25°C 💦 RH: 50% 💥 PPFD: 700+ µmol 🌬️ VPD: 1.5 ⚡ EC: 0.2