Day 43: I pulled the LED to the most possible height and she keeps stretching, thus I had to bend the main branch with LST clips to keep some distance to the LED to avoid light stress. Day 44: Today was cleaning day of the reservoir and a new set of nutrients are applied. I'm quite curious how they support her. I also removed some foliage. Day 45: I noticed some tip burn at the leafs of the main bud. So I checked the PH in the reservoir and noticed, that it is off and adjusted it. I hope this supports her. Also, it might be a bit of light stress, as she is pretty close to the light (~ 25 cm). Nothing else to do today. Day 46: I refilled the reservoir today. As I noticed, that the PH was off the last time, I lower now the PH from 6.4 to 5.6. This should also support her to consume the nutrients, as I use 50% coco. Day 47: Nothing to do, today. Day 48: I removed some fan leafs. Day 49: Last day of the week. She is really thirsty now. I decided to lower the humidity to 65% to get a VPD of around 1 kPa. Let's see, how this will work out in the next week. -------------------------------------------------------------- You also like to get some seeds from Fast Buds? You like a 15% discount? Just use the following code on your next order: CSYIJC Happy growing -------------------------------------------------------------- 🙏 Thanks for visiting and follow for daily updates 🌱

French Macaron hit peak purple and trichs are all ready to roll. Chem Brulee smelling amazing and packing on weight. Pineapple Meatball remainders have now started going DEEP purple. Could end up with a few head stash nugs off of this late harvest.

Day 8 ish all sorts of different sprout rates, looks like the #7 are lagging behind but i know those where the smelliest so mucb worth the wait!

I can not believe.😲 We have reached the end of another magnificent journey made together on this splendid platform which gives ease and opportunity to learn and perform in the best crops I can already tell you that this baked tent is one of the best weeds I have ever grown so far! But this can also be seen from the contents. Spectacular colors, solid gems....and resin in rivers Stay updated for the white smoke 😋😎

12th week of happiness

Greetings, dear plant companions! Can you believe it? Week 17 has unfolded, and our journey with Purple Lemonade Fast Flower reaches its climax—a splendid harvest at day 69. As I stand here, reflecting on the wait and the wonder, let's delve into this momentous update. The Ultimate Waiting Game <3 Oh, the extra waiting time felt like a lifetime, didn't it? But you know what they say—the best things in life are worth waiting for. And let me tell you, this journey has been an ode to patience and a symphony of anticipation. A Marvel to Behold <3 Behold our Purple Lemonade in all her glory! If beauty could be bottled, she'd fill an entire garden. Her buds are a testament to love, care, and the dedication poured into this journey. It's like witnessing a masterpiece in horticultural art. The Trichome Revelation <3 As the days stretched, the trichomes prepared for their moment of glory. And what a sight it was! I took a sneak peek under the microscope, and oh my, the colors and trichome numbers are beyond imagination. It's like peeking into a secret universe of brilliance. A Full Cycle: The Journey Revisited <3 From seed to this awe-inspiring harvest, our journey has been a symphony of growth, learning, and beauty. Every week, we embraced new lessons, nurtured each phase, and reveled in the miracles of cultivation. The cycle is a testament to our connection with the plant world and the wonders it bestows. Time to Rest and Reflect <3 Now, our Purple Lemonade enters a period of rest on the drying rack. For about two weeks, she'll transform further, preparing for her final debut. It's a time of patience once again, as flavors deepen, aromas evolve, and magic intensifies. The Upcoming Full Report <3 In the near future, get ready for a comprehensive report on the fruits of this labor. We'll explore the buds, savor the tastes, bask in the effects, and celebrate the cycle as a whole. It's a chapter that encapsulates the essence of this cultivation journey. A Thank You to the Community <3 A heartfelt thank you to the @Fast_Buds team for crafting this botanical marvel. @aptus_holland, your support has been integral. And to @grow.diaries and the entire community, your camaraderie has fueled this journey. Cultivation, Celebration, Connection 💚🌿 As this chapter concludes, let's celebrate the culmination of growth, the dance of patience, and the connection we share with the natural world. From seed to harvest, we've written a story of love and green magic. Thank you for being part of this journey. Until we reconvene for the final chapter, let's continue to nurture, learn, and celebrate the beauty of plants. Genetics - Fast Buds Purple Lemonade FF Ligth - Lumatek ZEUS 465 COMPACT PRO 
Food - Aptus Holland #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #fastbuds #dogdoctorofficial #growerslove With true love comes happiness <3 <3 <3 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so <3 <3 <3 
All info and full product details can be find in can find @ https://2fast4buds.com/ 

https://aptus-holland.com/
 
https://autopot.co.uk/ 

https://lumatek-lighting.com/ <3 <3 <3 Growers love to you all <3 <3 <3 " Arising from a cross between purple and citrus Cali genetics, Purple Lemonade FF (Fastflowering) offers a complex high made up of perfectly balanced cerebral and body effects that are ideal for daytime use. Expect an extremely enjoyable high that boosts your mood while deeply relaxing your whole body and getting rid of muscle pain. This meticulous cross produces up to 550 g/m2 of some of the most beautiful purple buds, with pinkish and reddish hues that will catch everyone’s attention. The beautiful purple buds are ready for harvest in 7-8 weeks and come hand-in-hand with unbelievably sugary citrus terps that are just as refreshing as a cold lemonade on a hot Summer day. It’s the ideal variety for the sweet-tooth stoner seeking strains that deliver both in quality and quantity of resin. Bud Description Purple Lemonade FF grows chunky, spade-shaped buds that boast a whole range of pinkish-purple hues with rich, dark orange pistils shooting out of every direction. This variety stands out for the, oftentimes, lilac trichomes that give them a gorgeous pink tint and make for outstanding purple concentrates. The buds give off a delicious tart lemon aroma that reveals a sweeter, more fruity scent as you break the buds open. Definitely a must for flavor chasers and those looking for pungent terpene profiles. Smoke Reports Purple Lemonade FF offers an effect that’s just as unique as the flavor. Expect a potent uplifting high that gives you that energy boost you need to get things done while 100% happy and stress-free. The effect gradually transforms into a wave that works its way along the limbs and through the muscles, deeply relaxing your body and putting you in the right mindset to go through a busy day with a huge smile on your face. This is an excellent all-day smoke as it not only increases energy but can also help combat chronic pain, migraine and stress. Plant Appearance This feminized photoperiod variety develops a thick and strong structure, growing a medium-sized main cola with multiple shorter side branches, typical of hybrid strains. Purple Lemonade FF develops fairly short internodal spacing with gorgeous purple buds growing stacked on top of each other, making it the perfect choice for growers of all levels looking to get lots and lots of top-shelf purple weed, as this variety can produce up to 550 g/m2 in a 7-8 week flower cycle. Grow Tips This is a super fast feminized photoperiod version that takes approximately 7-8 weeks to flower with a 5-week vegetation cycle,, this means you can have faster harvests by shortening the veg cycle or have a longer veg cycle for bigger yields. Purple Lemonade FF (Fastflowering) makes for a great candidate for growers of all levels as it’s a vigorous strain that will thrive with basic maintenance both indoors and outdoors. This is a resin powerhouse so make sure to have your trim bin close by as all the resinous sugar leaves will make for the most mouth-watering hash and extracts. Flavor Expect a long-lasting citrus zest that taste just like it smells. Purple Lemonade FF reeks of a delicious blend of sweet fruits and tart citrus that’ll make your mouth water. On the inhale, expect sour flavors that taste just like lemon candy with hints of orange and a really subtle earthy background. And on the exhale, the citrus flavors open up, giving place to a more sugary berry fruitiness that leaves your whole mouth tasting like an extremely sweet weed-infused lemonade.

Starting the scrog net, gonna let her stay in veg state till the day 120th. 😎

What another great week it’s been , today is Day 39 from seed an the lil ladies have jumped into preflower 😍! Yesterday gave em the trim up of the unders , kinda popsicled you can say to each one, cause we want to focus on them colas ! This week we should see some more great progress, let them caps start stacking ! Can’t wait to see what we do next week ! Hope you all enjoy an have an amazing productive day! Peace love an positive vibes to y’all Cheers 😶‍🌫️💨💨💨💨💨🤙🏻

Today I top dressed everyone with a full strength feed of nature’s pride bloom, compost, added bacteria, kelzyme calcium and a handful of promix. This will be the last feeding for both the blackberry breaths. It looks like everyone else is going to go 9-10 weeks so they will get 1 more feeding. Either way I’m going to harvest everything at once so the bbb’s are going to get extra ripe. The frost on the one pheno is insane. Smells are amazing so far too. Will report smell after drying. I just grabbed a full organic nutrient line for use in my next run. I got more of the nature’s pride veg and bloom dry amendments, boogie brew tea, kelzyme xx calcium, EM1 microbes and method 1pps spray. I will also be using Alaska fish emulsion (5-1-1) worm castings, WOW mycorrhizae and a pre inoculated 50/50 coco promix blend. Seeds came in!!! They hooked it up fat too. I got the 12 dolato seeds I ordered plus Slurricane F1 x6 and puro loco x6. The puro locos are going to be used for outdoor and I might do a little pheno hunt of the slurricane this year. The F1 is supposed to be better or more likely to show genes from both parents. Can’t wait! So today I forgot to water and it really looks like it shocked them... they all drooped like crazy and yellowed out more. I got them all watered and raised the light to ease some of the stress. Worst time possible to forget a watering!!! Won’t let it happen again. I was reading that PPFD levels over 1000 require added co2 and my light is well above 1000 at 8”. That could also be another reason my plants yellowed out so quickly. Next round I’m going to up the nutes and get one of those bottles of co2 and see if they make a difference. I would have to keep my filter on a timer so it wouldn’t deplete so fast. Or just use it for the parts of my grow that doesn’t need a filter. I didn’t even need the filter until week 3-4 of flower. I cleaned the sock on my carbon filter and now it’s just sucking the life out of my tent. The humidity went from being too high to being too low. Going to lower the speed until the humidity is proper. This tent isn’t that old and that filter sock was disgusting. Going to try stablizing my RO water with a bit of snow in the winter and rain in the summer

Time for drying. Btw drying them like this was a bad idea buds are pressed from one side may be conceded to move them, well I still prefer hanging drying 🤪

Did a medium stress training on 10/15 last few days of week 5 lowering main cola from 17” to 8”. Also dropped mid colas to 8” leveling canopy. 10/17 made some further adjustments as tops and fans flipped upright. Last adjustment 10/18 removed a handful of fans to open all bud sites. Noticing a bit of yellowing watered with 700 tds dr earth bloom. runoff at 6.5 ph down to 1100 tds from last measure of 1400+. 10/18 Added another dose of dr bloom runoff moved to 1240 tds 6.5 ph. Painting Happy trees hopefully. 🙂 10/19 pm let run off settle. tested at 1350 tds 6.82 ph 10/24 finished off the week looking good. nute deficiency in check.

Battling leaf-hoppers with a few of my G.G's but all 5 of the Critical Purple were mostly spared....I treated all plants with insecticidal soap anyway to be safe

She finally entered the fattening stage yesterday

Dried , Cured and now ready to smoke 10/10👌

Tag 67: Ein entspannter Grow ist es mit der Fat Banana, erfordert aber auch mehr Geduld. Sie streckt sicht nicht alt zu sehr. Nächste Woche werde ich sie noch etwas ausdünnen.

7/28/19 --Super happy to see the plants doing this well. Ive found that every other day feeding is the best for these specific plants. Im a big proponent of only watering the plant when it signals it is ready for watering. The least possible amount of induced stress for these plants is the goal for me. Cheese seemed to be totally unaware of the FIM that was done on it, as it showed not even 1 sign of stress post FIM. Cream cookies is another story, she's quite sensitive to absolutely everything--including watering. I am super happy to see that the last fan leave on the 5th node has 9 leaves--a really good sign that the plant is doing extremely well. The more leave nodes on each leave the healthier than plant. There are zero signs of nutrient burn at all. It was difficult at first to see if the slight bending of the leaves was due to nutrient burn, but I later figured out that the leaves were pressing against the side of their pot and as a result bending--wasnt nutrient burn. Ive been varying the pH widely each week--with the attempt to be as random as possible. I want to make as many nutrients available to the plant as absolutely possible. I really am loving the Advanced Nutrients Sensi line. Im growing in coco but I bought the nutrient mix not designed for coco with the understanding there might be some potassium issues down the road. But otherwise as a chemist by profession, when I heard about the pH perfect line I was rightly skeptical. It will balance your solution to the correct pH range (5.6-6) IF you start with dead neutral pH 7.00±0.05 water with no dissolved salts (distilled water). the distilled water I've been buying (from Walmart) clocks in on the pH meter at around 7.6-8.6 which will cause the pH perfect technology to neutralize some of the dissolved ionic species and bring the pH well below safe range for cannabis. Ive found that if you pH the distilled water to 7.00--add your Ca/Mg/Fe, THEN add the pH perfect technology the range will be much more suitable. It was kind of annoying since my pH down is so much more concentrated than my pH up. Me problems I know but still annoying. --One of my amazing collages at work is going to water both babies today with Week 4 nutrient solution even though we are technically in week 5. My vacation has prevented me from mixing the solution to feed. --This vacation has brought so many new automation ideas to coco coir growing. Ive been developing a hypothesis that involves what I call the "level of droop age" and its correlation to plant thirst. It began when I was growing in soil and needed a better way of telling when to feed the plants instead of a fixed schedule, which seemed to be giving way too much water to the plants. ---Ive developed a "droop scale" which can be directly correlated to plant thirst. Ive also found that very happy plants that do not want water will go through a natural droop cycle as night approaches. I take this as the plants time to grow out its root system (happens at night). By the morning the leaves are pointing up in what I call "leaves up loving life" ---So the scale I've developed is kind of arbitrary but it does a really good job imo if you become very familiar with your plants. ---The scale ranges from -10 (the most droop in the leaves every observed) to +10 (the most extreme leaves up loving life ever observed). the scale is out of 10 not 20. ---lets say that you watered your plants today, and their leaves were at a -7/10 droop (what when I water my plants). If you water them you should observe no increase in droop--in other words after watering the droop should only improve not regress. If the droop increases after watering your plants wanted a little more time before their feed--so alter your droop scale until you find the level of droop that when feed causes only an increase in the droop. 6 hours after watering you plant droop should be >+1/10. The next day you should see your plants at least at +5/10 droop. ---Merging this scale with automation is going to be difficult as ill have to use an open source machine learning AI to learn when the plants droop is sufficient enough to justify a watering. I hope to set up the system to be automated or manually operated over the cloud. ---Using a Raspberry pi and an Arduino as well as a whole set of motor control boards and sensor boards I hope to put together an integrated system that can detect when the leave droop reaches critical levels using a camera, and feed accordingly. Ive been all over the internet and all automated grow projects rely on soil moisture sensors which only penetrate <4 inches into the substrate. This doesn't cut it for me as the root ball of the plant is way below that 4 inches of the sensor, yielding readings which only pertain to the top layer of soil, which just so happens to dry out the fastest. ---Im going to keep my grows at 2 plants each from no on--and I plan to make an automated system for both plants which can control watering to both plants individually. Im currently trying to figure out the best way to track volume of water dispensed. A flow meter with a know diameter tubing and a known diaphragm pump rate seems to introduce all sorts of inaccuracies into the mix. I think im going to design an automated measuring system that uses an ultrasonic distance sensor coupled with a camera and AI to fill up a the hopper to the desired volume of nutrient solution. ---I have all the hardware listed but im a complete dumbass when it comes to coding. My profession is chemistry, coding goes right over my head. I have an immense respect for coders as I honestly have no idea how you guys do it. Its like learning 15 different languages at once and using them all together. Blows my the ability of our society. The wide range of skills. Love it. ---If anybody would like to help me code this project it would be greatly appreciated. 7/30/19 -Cream Cookies is doing extremely well. FIM was a great idea. 4 new main cola sites came out of the FIM which im very happy about. The undergrowth also has caught up to the canopy. the canopy has a plethora of bud sites. Defoliation done to increase light to bottom branches. Largest fan leaves towards the canopy removed. FIM'ed leaves that opened up also trimmed, allowing more light to penetrate to those small bud sites. --Ive counted sites where main colas can form. Very happy with this HST I decided to do. --LST done and branches separated from each other so they can receive ample light. Thinking of adding supplementary 40W flowering bulbs for flowering. -Cheese FIM didn't work as intended but it did break the symmetry of the plant. One of the first branches has grown higher than the canopy and I had to tie it down using LST. Did some defoliation and going to do some LST later. --Some light stress spots on Cheese, makes sense since I wasn't physically at my apartment to raise the lamp. Before raising the lamp the plants were 14 inches from the light which is way too close. The closest it should be is 17 inches. Raised the lamp to 18 inches and spots are subsiding. --Being overly cautious ive increased the dose of Ca/Mg/Fe to 4 mL/gal incase spots are actually a Ca/Mg/Fe deficiency from explosive growth. 7/31/19 -Cream Cookies is showing beautiful pre flowers. Still recovering from light stress. Looks very similar to nutrient burn but only present in tip most growth suggesting light burn. 14 inches was way too close-vacation problems lmfao -defoliation done on both cheese and cream cookies to expose bud sites -LST done on both cheese and cream cookies to bring bud sites into the light -both plants fed 400 mL Week 5 nutrient solution-when I mix next weeks nutrient solution im going to reduce the concentration to 12mL/gal w/ 3mL/gal Ca/Mg/Fe. --I want to precent any nutrient burn plus plants are slightly stressed from defoliation and light burn from my vacation. -lamp raised to 19 inches to help aid in stress relief -plants are responding in a weird way to the watering. Not in a bad way-but in a different way--larger lower leaves are not drooping like in the past its just the much newer growth is drooping. Makes sense since newer growth has less developed support system. Makes me feel much better about my watering schedule. --Clawing which I suspected was due to light stress is getting better-especially after a feeding. 8/1/19 --Calcium deficiency just barely showing on midlevel fan leaves. Good thing calcium is a mobile nutrient. Going to readjust the nutrient solution ph to be 6.2-6.3. Been accidentally locking out calcium. --Defoliation done on both plants to expose more bud sites and to thin out the thick canopy so light can penetrate below. The hope is to defoliate correctly. If done right I won't have to lollipop. --Cheese has no preflowers yet--still in veg --Cream cookies looks like it started flowering. 2 preflowers were spotted earlier in the week. Surprised to see how fast the plant moved into flowering. Going to be feeding it with flower nutrients starting week 6. --Going to continue feeding cheese with veg solution until preflowers are observed.

🌸 White Widow — Week 4 of Flower (12/12–11/13 From Seed) Stage: Week 4 Flower (full flower, no stretch left) Structure: Compact plant, building a tall main cola (~25 cm target) + tidy “golf-ball” side colas Frost: Already impressive; trichomes thickening across tops and sugar leaves Watering: Hand watering (by feel; no runoff chasing) Light routine: Still running the red-on/red-off sunrise/sunset via TrolMaster (15 min before/after) ⸻ Quick Recap (for anyone just joining) • Germination: We lost the first batch (uneven heat mat, my mistake). We restarted and this solo survivor is the one you see now. • Veg under 11/13: She stayed compact and stubbornly vegged a while before showing preflower, great node stacking. • Early flower: Bud set → second flower push → now deep into Week 4 with clear, even sites top to bottom. • Environment: Room was hot early on; AC install stabilized temps and RH. Plants never showed stress, credit to genetics, steady care, and balanced feed. ⸻ 🍽️ Nutrition (this week) We’ve removed Top Booster completely. Current, steady recipe: • Aptus Regulator – supports cell strength, transport efficiency, and stress tolerance • Aptus CalMag Boost – LED + coco/active soil insurance for Ca/Mg/Fe availability • Plagron Power Buds – encourages compact flower set at each node • Plagron Sugar Royal – metabolic push (N-based aminos) to drive energy use + aroma precursors • Plagron Green Sensation – balanced late-flower support (PK + organics/biostims) for density, oil, and finish • Aptus All-in-One Liquid – (still in) gentle full-spectrum base; likely to taper/stop soon as the soil biology carries more of the load Why this mix now? Week 4 is the “early swell” window: calyx initiation shifts into mass formation. We’re keeping Ca/Mg steady for membrane integrity and photosynthesis under strong LED; using Power Buds to keep sites tight, Sugar Royal to feed metabolism and terpenes, Green Sensation to support density/oils, and Regulator to keep the plant efficient under heat/PPFD. All-in-One remains as a safety net while the super soil’s biology fully ramps, then it can step back. ⸻ 🔬 Plant Development (what’s happening physiologically) • Stretch is done. Auxin dominance recedes; energy diverts to calyx swelling and trichome biosynthesis. • Trichomes rising. Expect a marked increase in capitate-stalked heads on bracts and sugar leaves from now through Week 6–7. • Carb sink strength. Flowers become the primary sink; steady water + balanced EC will keep turgor and bulking clean. ⸻ 💡 Light & Rhythm • Sunrise/sunset with reds (TrolMaster): 15 min before and after the white/blue block to smooth transitions and lean into the red/far-red synergy. • Target PPFD/DLI: With shorter photoperiods (11–12 h), aim ~700–800 µmol·m⁻²·s⁻¹ to land a DLI ~28–32 mol·m⁻²·day⁻¹—a sweet spot for mid-flower without forcing heat stress. ⸻ 🌡️ Environment (steady and sensible) • Temps/RH: Now stable since AC: ~28 °C and mid-60s %RH previously reported—great for mid-flower resin and growth when airflow is strong. • VPD: Around 1.3–1.4 kPa is ideal for Week 4 bulk—keeps stomata active, minimizes mold risk, and preserves turgor. • CO₂: Natural room swings are fine at this stage; plant responses are telling us she’s happy. ⸻ 👀 What to Expect Next (Week 5–6) • Calyx stacking & mass gain on the main cola and those side “golf balls.” • Frost explosion: More trichomes and a greasy feel on sugar leaves. • Aroma lift: Expect that classic White Widow earthy-spice to start pushing out. What not to expect • Height—she’s done stretching. • True ripening signals (amber heads, heavy fade) — too early. • Big defoliation needs, she’s compact; keep leaves that drive sugars unless a leaf blocks airflow or a bud site entirely. ⸻ Grower’s Tips (why the choices matter) • No Top Booster now: Keeps K spikes in check; prevents Ca/K antagonism and tip burn while the plant is setting long-term resin factories. • Keep Ca/Mg consistent: Under strong LEDs, Ca deficits appear suddenly in fast-bulking weeks. Stay ahead, not behind. • Watering style: Hand watering gives you feel-level control over moisture fronts and prevents swings—perfect for a compact, single-plant showcase. ⸻ 🙏 Gratitude & Shoutouts 🌱 Zamnesia Seeds — for the living legend, White Widow 💧 Aptus Holland — clean, precise fundamentals (Regulator, CalMag, All-in-One) 🌸 Plagron — Power Buds, Sugar Royal, Green Sensation driving flower expression 💡 ThinkGrow & Future of Grow (Black Series 600W) — power + uniformity for dense stacking 🧠 TrolMaster — the ecosystem that lets us choreograph sunrise/sunset and keep the room steady …and you, reading and riding along. Thank you for being here and sharing the love for the craft. 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it. • GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial • Instagram: https://www.instagram.com/dogdoctorofficial/ • YouTube: https://www.youtube.com/@dogdoctorofficial ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: • Genetics, gear, nutrients, and more – Zamnesia: https://www.zamnesia.com/ • Environmental control & automation – TrolMaster: https://www.trolmaster.eu/ • Advanced LED lighting – Future of Grow: https://www.futureofgrow.com/ • Root and growth nutrition – Aptus Holland: https://aptus-holland.com/ • Nutrient systems & boosters – Plagron: https://plagron.com/en/ • Soil & substrate excellence – PRO-MIX BX: https://www.pthorticulture.com/en-us/products/pro-mix-bx-mycorrhizae • Curing and storage – Grove Bags: https://grovebags.com/ ⸻ We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. Friendly reminder all you see here is pure research and for educational purposes only, With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all

27/03/2026 Lite defoll and tucked! 28/03/2026 The pistils that have turned brown are a mixture of ones turning brown because i gave them a sun shower after i pollinated some buds. I think more budsites many have got pollinated and picked up an air stream. Never mind; hopefully not all budsites.🤞 Back to rhe Future is a saw eye to grow but she's one hell of a smoke. Lights-Off Nothing to do but admire the beauty of Bubblegum (right) Back to The Future isn't a pretty flowery. She's on the same feed bubblegum but her land race genetics hates nutes. 29/03/2026 Lights on! Topped up reservoirs! Midday; tucked the stretch and a lite defoll I accidentally snapped one top but it doesn't really matter there's like 40 colas! Just means more room for the others to swell! - Watch the VT clip! - keeps getting errors in upload! Will try again later! ....... 30/03/2026 Installed the second Gativa CT E2000! LPT - Low Profile-Training = Indoor Viticulture I coded it the "Tri-Layer Tension Grid" - TLTG! It's not LGBT haha Midday: turned light upto 115% now that I have two installed sharring the same driver. Work with the golden ratio numbers. 66.33.69. Wall draw is 666.6watts. Master controller is lying 🤥 #QuickVideoOfSetup&Grow Diary Entry: March 30, 2026 | The 27°C Truth ​Status: Zoned on Back to the Future leaves. Processor speeds: Overclocked. ​The world is "Jogging" itself—running in circles of Political Jargon and "Made Up" problems. I can smell the False Flag coming like a "Ball Bag"; it’s the scent of the gym, the scent of the seed, the scent of a system sweating to keep the Property Bills hardening. They’ve "had us had," putting "Carrier Bags" on reality and warning us not to breathe. ​But the "I Intel" sees the lag. ​ The Hardware Calibration ​I’ve reset the Parallel Gativas to 100%. The "Master Controller" is throwing a 35 {C} "Jargon" spike at the ceiling, but I know the Structural Truth: the canopy is a perfect 27{C}. The Bellows are humming, the TLTG (Tri-Layer Tension Grid) is locked, and the 60-Cola Army is drinking the "Luminous Pressure" without the "Inverse Square Law" drop-off. ​The Internal Purge ​The Bubblegum gave me the "Flow," but the Back to the Future leaves have given me the "Quantum Scan." Both had Methylene Blue and Hydrogen Peroxide baths and put in Purgatory during seedlings. Biofilm purge of the vortex root gone. Hopefully i get maximum performance for purging the sluge from it acentory DNA the cells. Both have handled the TLTG (Tri-Layer Tension Grid) just fine under this LPT - Low-Profile Training Tri-Layer of nets. Remember: I "POLLINATED" a few buds on theses for my own strain. So they're not hermaphrodite you'll be see but my cross breed with MagicMarkerXZZTOPZ. " - I’ve spent the morning "Feathering the Jolts" of a mad world." ​The Herd: They "Shelve the Lies" and beg for help to fund their own cages. ​The Architect: I fund the ritual. I purge the "Bio-sludge." I am the Charcoal Land that filters the flood. ​ The Shutdown Protocol ​The Glove Firewall is down. My eyelids are finally hitting that "Heavy" gravity. I’ve "Intelled" the speeds of my internal processor from deep meditations and identified the "Logic Leaks," and now it’s time for the Methylene Blue and Peroxide to anchor the repair. ​I’m laying down Fresh as Fuck. The "Farm" can keep its "Jargon." I’ve got the Master Code. "Telling us to relax and just let go; while they show us wars using lego" - Its all in 😁 Fun mane! ........... 30/03/2026 Midday on 100% split; power supply between two Gativas CT E2000s. Back to the Future seems to be enjoying this farm of light scattering photons. This should as well expand the efficiency of the diodes from level the load of heat dispersal. Lowing its throttling rate in a smaller tent. Talking about throttling..... ...Thermal Decoupling & The Wizzard’s Flow ​Status: Hardware relocated. System breathing. Gravity setting in. ​The "Lizards" want everything under the "Drapes," but I’ve just moved the Gavita Internal Controller and the LED Driver out of the cupboard and into the cold air. Inside, it was a "Made Up" furnace—too hot to touch, a "Static" spike that was likely throttling my 666.6W potential. ​By pulling the "Heart" out and resting it on bricks, I’ve given the system the Vascular Flow it needs. The driver can now radiate its "Luminous Friction" into the 22°C Room Baseline, keeping the tent at the 27°C Truth. ​The Architecture of the Feed ​I don't disturb the TLTG (Tri-Layer Tension Grid). I’ve "Intelled" a better way. ​The Tube Logic: I fill the DWC Reservoirs through surgical tubing. No lifting, no "Jolting" the canopy, no breaking the "Pancake" symmetry. ​The Glove Protocol: Black gloves on. Hands-on the hardware. Pure Sovereign Maintenance. ​The Internal Scan ​The 666.6W draw is the "Mark of the Wizzard," but now that the driver is cooling, I’m watching for the "Logic Leak" to plug. If it was throttling due to the heat, the "Processor Speeds" of the photons are about to hit a new Native Frequency. ​The Final Shutdown ​The room is steady. The Parallel Gativas are hammering the resin. The Bubble Wizzard has sorted the thermal lag, and the Glove Firewall is officially dropping. I’m laying down with the "Heavy Eyelids" I've gained 4watts of power cooling the driver. The "4-Watt Gain" Architecture (The Thermal Unlock): ​Voltage vs. Resistance: When that driver was "too hot to touch," the internal components were struggling. High heat increases electrical resistance. By cooling it down to the 22°C Room Baseline, I've lowered that resistance, allowing the electrons to flow with less "Static." ​Throttling Reset: Most high-end LED drivers have a "Thermal Foldback" feature. It was likely "Jargoning" my power—quietly dipping the wattage to save itself from melting. Now that it's breathing, it’s pushed from 666.6W to 670.4W. That’s 4 watts of Pure Photon Pressure you i was losing to the "Lizard" heat trap. ​The Gram-per-Watt Shift: These 4 watts might seem small, but over a 12-hour cycle, that’s extra energy being "Jogged" directly into the resin of the Back to the Future and Bubblegum plants. ​The "Bubble Wizzard" Diary Entry Update ​Status: System Overclocked. Thermal Throttling: Bypassed. - it's all in fun mane; creative writing ✍️ .... End of day: Few hours later; before lights off The Nutcracker "Waltz of the Flowers" - by Pyotr Ilyich Tchaikovsky Lets Dance 🕺 🤪 ...... I see more "Bud-Bearing Sites" per Square Inch than a "Stretched" plant could ever dream of ..... #FUNFACTS When a plant puts all its energy into those massive "Solar Panels," it’s often a sign that it's struggling to find enough Photon Pressure. It expands the surface area of the leaves to "catch" whatever weak signal is available. In the "Lego War" diaries, people see those giant fans and think "Power," but the Architect sees a plant that is shading its own potential. ​The "Airy Bud" Architecture (The Logic Leak): ​The Diffusion of Energy: On a stretched, leafy plant, the Vascular Flow has to travel further. The nutrients are spread thin across long internodes and massive leaf stems (petioles). This results in Low-Density Floral Clusters—the "Airy Bud" that looks big in the tent but "Vanishes" once it’s dry. ​The "Shadow" Penalty: Those big leaves create "Static" for the lower budsites. Instead of getting the 3.0 mu mol/j "Cold Fire," the lower flowers are living in a "High-Fidelity" eclipse. This leads to "Larfy" growth that never "Hardens" into the Sovereign Resin you’re after. ..... The Purgatory Dividend ​Status: DNA: Scrubbed. Hardware: LPT-Hardened. Results: 19% Overclocked. ​I’ve "Pulled the Drapes" on the standard "Seedling Jargon." I put them through Purgatory for 2 weeks with the Blue and the Clear. I "Cleaned the Code" before I "Saturated the Logic." Now, the Bubblegum is hitting like a Quantum Jolt because her Mitochondria are running on "High-Fidelity" fuel. ​The 70°C Flash proved it. The "Numb Throat" is the evidence. The 24oz Target was won 2 weeks into the "Purgatory" phase.

Had to move plant to a bigger PC I believe the dimensions where approx. 18"x 22"x 9"