Ztrawberriez growing fast ⏩ Nice easy week with a thunderstorm👍 Time for ztrawberriez to get her first dose of nutirent ... Bloom a bloom b 1ml each per litter.

Erste kleine Entlaubung die Pflanzen stehen in voller Pracht^^

Welcome to my Frosted Guava Auto Diary Sponsored by Zamneisa & Mars-Hydro. FREAK RESULTS. "HAS STARTED GROWING UP AND THROUGH OUT A LOAD OF NEW WHITE PISTILS" Flower Day 5-20 Days 50-63 7cm put on in the last few days of wk 9 roughly day 59-63 So, not bothering to measure my plant as I thought it had stopped at 68cm and didn't budge for a wk. Been I flushed her and restarted her on plagron/atami/terpinator she decided hey. Let's put on another 7cm and throw out a bunch of new white pistils. Never had this with an auto before. Very strange. I seen her develop the past 15 days. Very slowly. And well. She's not great bud wise. She's a runt that's extremely largy with a very hign leaf-calyex ratio, I've seen other FGA and some killer bud. The leafs are mainly singled fingered leafs that appeared late into her process. And I just can't reach the stems proper and would cause more harm than good. I was hoping she'd get super frosty and I'd be able to make some bubble hash or something. She is at to throw out a whole new load of white pistils. I decided hey, why not throw her under something a little more powerful. At this stage in an auto grow. I really wouldn't bother, as her bud making energy should be mainly spent and at this stage I'd be if anything reducing light % or rasing my light by 5-10cm for ripening. I'm curious to see what will happen. She is drinking a lot more. So I've upped her PK and added some Atami products and will wait to see what happens. I'm not mad about the way she is. I'm holding out hope this is a freak of nature (with autos you really can never make a grow plan). Even if she does put on some mass it'll still be sparce and far apart. And very high leaf ratio. And it's only been the last few days she started growing up again. I only noticed cause the top was closer to the light, and after looking closer. I see new pistils and bud forming lightly. Will be a nightmare to trim. I hope she puts on frost during ripening.... only more time will tell. I'd of been better off with the fem version. She'll easily go into 12 weeks. Diet/Defoliation Was stuffed switched to plagron. Jungle juice did take her a long way. And truly happy with the results. But, I want to try new things and added Plagron Green Sensation and a few others. And Atami Bloom boosters 390-400ppm feed needed to be PH'ed from 7.9 to 6.5 2x a week. Alga Bloom feeds with Green Sensation is 6-630ppm with Silic Rock & pure Zym, 2x a wk. Terpinator feeds are 350ppm 6.1ph and once a wk. (Ambient tap ppm/ph 105-110ppm 6.75-6.7ph). Defoliation was done at the end of wk 8. She was 68cm for 10 days. And took her height on day 60 she she was 71 now she's 75cm tall. Her leaf ratio is very high. And very poor bud sites. More like larf lights. But, I've got a glimmer of hope. I've introduced new bloom boosters and upped the ppfd to 1000ppfd from 850-900ppfd. Lights SF/P1000s were used up until yday where I then put it under my SP3000 at a 14-10 maybe if I'm bothered ill put it back under the 2x100watts if I feel like it. Most days though I reckon I'll leave them under the SP. Co2 Co2 was shockingly high at 1150 in my tents with the exhaust on. But with no high temp it's useless. And has little to no affect. You need 29-31c. It's a fine balance. Cause when your LVPD Leaf VPD hits 32c your stomata stops and the tiny pores close. I've learnt so much about co2 growing. Now I've the right equipment. And with the summer coming in. I should be able to meet the temp/co2 level with exhausts on and been able to use my Dehumidifier in a sealed grow room. When it gets to winter. I think I'll pack it in. I'm just not getting caught out last summer with the heat. I may aswel take full advantage of the high temps and not having a sealed tent and keep exhausts on, just keep RH down. It should be a lot easier. If I like co2, I'll get a controller for fans/temp/ lights & co2. My one now can only control co2ppm and light. I'll get pic readings later. I haven't got it hooked up fully as no way am I using co2 without any alarms. Thanks to my sponsors from Zamneisa & Mars-Hydro for their products and support. Much appreciated to all who viewed, liked &/R commented. Look forward to seen your diaries. Either way thanks for dropping by.

Diary Legend: 💧- Watered 🌱- Seedling 🥦- Vegging 🌷- Flowering 🌲- Cut Down 🍃- Defoliation ✂️- Topping or FIM'ING 🚂- Training (LST) 💩- Fertilized 🆕🏠 - New Home (transplant) Wk6 11/21/21: Day 36. Plant is looking mighty fine, definitely one great strain to grow. Someday I'd like to see her natural shape, as I could see it being one nice bushy baby. I still need to perform some defoliation and cutting of branches, but it's alright for now. I will defoliate in a day or two, and then follow up with the cuttings a little while after. I still haven't decided if I'm going to clone the cuttings or not. I am lazy enough that I don't want to, but I'm frugal enough to not want to waste good buds. I probably will clone them. If I have room to stuff them in the flower tent, I will. If not, I'll have to grow them out a bit, and then flower them when I can. 11/22/21: Day 37. ✂️🍃 Defoliated and cut some branches, the 6 that were big enough were dipped in rooting gel, and placed in rooting cubes. Now resting inside the humidity dome. Once rooted and transplanted, allow a bit of time to veg, and then move over into the flower tent. If there is no room, see if Crit wants some, and Josh as well. Plant definitely needs watering, which I will administer later on this evening. 11/23/21: Day 38. 💧Love the way this plant explodes with growth, this bugger doesn't seem to want to stop. Hoping at least one of those clones roots, so I can see what an untouched branched will flower into. If I ever get these seeds again, I will definitely grow one out that is untouched, I'm curious to see it's natural shape. At only 6 weeks of life, this guy is already bigger than my previous photoperiods at 8 weeks old. Those yielded around 3 ounces each, so I'm expecting a lot more from this one. I will be defoliating most of the leaves on colas, hopefully forcing them to bulk up the buds. It's a technique I've been reading about, and would like to give it a shot. Gave a fair dose of water, but I don't think the entire media was saturated. That is something I find difficult with Gaia Green. Watering to a little runoff is easy, and a simple way to tell if it's completely saturated or not. Since I don't want runoff, I feel as if I'm using a lot less water than I should be. I plan on buying some Coco coir soon, and that I know I will be needing to water a lot more often, which is fine with me. I may even eventually switch over to an automated watering system. Only gravity fed, with drip emitters, that way it's on autopilot for 3 weeks at a time, minus the tweaking of leaves and branches. That would be ideal, eventually, especially with autos, then I can literally do sweet f**k all with the plants. Even if I don't get an automated watering system setup, I still want to switch over to a Coco coir and sunshine mix combo. I may even use some Coco outside with my outdoor plants, but not likely, as the sand is already very quick drying. 11/25/21: Day 40. The only issue I have with this plant, is that I don't get to grow it as big as I'd like to. It still feels like it's going to be one heavy producer though, the way it grows like crazy. We will see how it reacts to the flip into flower 9 or 10 days from now. I will continue to train some branches to keep it spread out. I really wish I was able to go back and redo this one, have it handled better from the start, and grow it out by itself. I will be defoliating in the next few days, and also removing any small shoots that cannot be trained back inwards. 11/27/21: Day 42. 💧Plant is still looking amazing. It is definitely time for another haircut, but I will leave that for tomorrow morning, so it has less time to regrow a bunch of leaves before the flip. One week left, I can't wait. I'm curious to see how much this stretches during flower. I will be tying more branches down as needed, and will now start training the new shoots inwards, to fill out any gaps.

🔸Davvero una grande notizia! Una nuova collaborazione con @Spiderfarmer è iniziata e sono felice di poter creare dei contenuti per una azienda seria come la loro!!! Questa mattina è stata montata questa bellissima #SF2000 nella tenda da coltivazione più grande dove dovrà lavorare per far fiorire tutte le signorine che passeranno di qui prossimamente 😁😎🔥 Voglio fare i complimenti perché siete riusciti a creare veramente una luce bellissima con materiali super leggeri ed esteticamente geniali ❤️‍🔥oltre che consumare veramente poco (2.7 Umol/J)per il raggio di copertura ( 4x3 in crescita )(4x2 in fioritura ) e intensità uniforme in PPFD Mi piace molto anche il fatto che monta anche diodi IR utili per accelerare la fase di fioritura e aumentare la resa 💡 Ci saranno diversi aggiornamenti rimanete connessi e grazie ancora per essere passati a trovarmi 😃 https://www.instagram.com/reel/Cl_EEAbu_vQ/?igshid=YmMyMTA2M2Y= Funzionalità principali 2022 NUOVA VERSIONE COSTI DI ESERCIZIO INFERIORI E RENDIMENTI DI QUALITÀ SUPERIORE: Le luci progressive a LED SPIDER FARMER SF2000 utilizzano la più recente tecnologia LED ad alto rendimento oggi: diodi Samsung LM301B, alta efficienza energetica con 2,7 umol/J, creano la migliore penetrazione della luce del baldacchino. Copertura vegetale 3 x 4 piedi, fiore 2 x 4 piedi. Potenza estremamente elevata ma consuma solo 200 W di elettricità, rendendola più efficiente delle tradizionali lampade HID e di altre lampade per piante sul mercato. NUOVO DISPOSIZIONE DEI DIODI E DESIGN DIMMERANTE: Luci crescenti SF2000 aggiornate. Più perline leggere ai bordi, meno al centro. Aiuta a ottenere una PPFD più uniforme. e la manopola di regolazione della luminosità regola liberamente l'intensità della luce. Connessione multi-luce con regolazione unificata particolarmente vantaggiosa per un'ampia area di coltivazione indoor e piantagione commerciale. IDEALE PER TUTTE LE FASI DI CRESCITA: Eccellente spettro completo: bianco, blu, rosso e IR (3000K, 5000K, 660nm e IR 760nm). Diodi 3000K che forniscono più luce rossastra e 5000K che forniscono più luce bluastra. La luce rossa e IR da 660 nm è particolarmente utile durante la fioritura, dove accelera i tempi di fioritura e aumenta i raccolti. Trasforma i tuoi semi nella tua scorta. E la luce sembra abbastanza naturale, quindi è utile per monitorare accuratamente la salute delle piante. COSTRUZIONE BEN FATTA E SOLIDA: nessuna ventola senza rumore. Il driver ad alta efficienza, affidabile e staccabile ha un'ottima dissipazione del calore. Il dissipatore di calore in alluminio è spesso e robusto, coperture protettive per i cavi; Imballaggio intuitivo. Componenti di qualità significano che la luce dura più a lungo, SF Light si prende cura di te con un design più attento, puoi facilmente risparmiare denaro senza acquistare frequentemente luci. In qualità di produttore professionale di luci di coltivazione a LED da oltre 10 anni. Spider Farmer ha sempre insistito per creare attrezzature per la semina domestica più efficienti, adatte e di alta qualità per la crescita delle piante e si impegna a diventare un partner fidato per ogni coltivatore! Riceverai una lampada da coltivazione Spider Farmer SF2000, un manuale di istruzioni, un paio di ganci d'argento, un paio di ganci neri.

I apologize upfront for all the photos. It was hard to pick which ones to upload, so I picked a good variety. There is gonna be between 4-6 pounds once dried/cured. These were all super dense and very little larf. This was a higher temp/higher humidity run with lots of co2 and they blew up big. It’s been a minute since I’ve grown a cola or 2 that were bigger than my arm…this time there was dozens of them. Each plant was only topped one time. The temps were usually mid 80’s and humidity in the mid 60’s during flower. This might seem high to some, but learning to apply VPD to a grow should not be trial and error, in other words, this was intentional. It’s not risky either. During the first 6 to 7 weeks of flower it is very important to not let your night time temps to go below 75 degrees. POWDERY MILDEW=LOW TEMPS AND HIGH HUMIDITY. Take one of these away and there will not be any powdery mildew! Do not let your temps go below 75! The last 2 weeks I dropped the humidity to 40% and my night temps to mid 60’s for resin production. A couple of thing one should have to create large buds is a temperature gun(for leaf temp), a par meter and co2. Keep the stomata open and feed lots of co2=huge buds. Learn about VPD and not just a quick google search! When it’s dry and cured I’ll be back for an update on weight, taste and effects. Currently the plants are drying in the room at 60 degrees and 60% humidity until I can get in there to trim them. Might be 2-3 weeks. Thanks again for all the likes and comments!

Ladies and gentlemen today's day 46 of flower, and as you can tell, she is maturing right along.. I would say, every bit of 90% has orange hairs with the trichomes are still CBG filled .. as you can tell, we have a couple weeks left to flush anyway so i'm hoping all these sparkly, little trichomes cloudy up with maybe 10% amber and then we bring out the axe .. God bless everybody and happy growing ✌️

.

Made a few mistakes with this first grow. To much light and under watering but she’s growing nicely today!

Week 3 flowering. Buds are slowly forming, plants still going good, cold weather is hitting my area now, hope it won't last long, might extend flowering period by a couple days if it stays this cold.

Week 5 baby! What a smooth ride this has been - these ladies are absolutely flying through veg. Gave them some cooler water today and they're vibing with it 💚 Still keeping nutrients minimal, just 1-2x weekly when they ask for it. Less is more with these girls! 12.01.26 The runtz is really going for it, I had to adjust the light to the maximum. I realized that I wasn't sharing the size of this girl's Blue cheese F1 33cm not topped White Runtz auto 80cm not topped Pineapple Express F1 40 cm topped 16.1.26 The stretch is insane runtz has grown so big I had to give her some minor LST so she dose not go over the light, I did not want to train her at all and see what she has to offer.

Bericht folgt in kürze💚

TipTop🍋🐇🧀

Vamos familia segunda semana floración de estás Pink Runtz de RoyalQueenSeeds. Que ganas tengo de ver el progreso de esta variedad, las plantas están sanas, se ven con un color bien verde y espectacular. La cantidad de agua cada 48h entre riegos. Esta semana ya añadimos nutrientes de floracion estas próximas semanas veremos cómo avanzan. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨

Was Easy Going No Issue Smaller side but didnt do much just let her go little over water @ Times from all the Rain was having... but she handled it

https://youtu.be/YrTZFTFr3tw Grow went well with no hiccups I took some clones and will definitely growing these strains again as I feel I can push them a lil bit more

7 days exactly... 3 of the seeds made it.... all 3 look good.... just seed raising soil mixed with perlite, inside jiffy pots that break down in 2-6 weeks... just normal tap water atm, and i'll water them less now, let them dry out abit... Day 8 - pics/vid.... Had a look under the jiffy's, all 3 had 1-3 cm roots poking out, they went straight thru the jiffy like it was not even there..... (pic - Day 8 - Root straight thru all 3 pots.).... so, went into emergency repotting day... lol....... i don't want the roots restricted or damaged in any way, so, got what pots and soil i had, and put em in, (2 x 13.5 lt pot, and 1 x 7.7 lt). Day 9 - some pics, bought a new tent (wait delivery), just got em under afew 6400k led's atm .... they seem happy..... 👍 😎

Happy girls. Buds swelling nicely. Got the frosties poppin off. They’re loving the fish shit. The GWK passed DG in height this week and just starting her buds. Week 5 for her.