Processing
Likes
12
Share
Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 07/12/2019 - Fed her 2l of 6.5PH water with 0,5ml of each Grow, Bloom, Max and Alga-mic, and 1ml of each Heaven and Vera,noticed about 10% run off, also added a green filter to the camera lens. Adjusted the light distance to 55cm again it was toooo close about 32cm. 10/12/2019 - Decided to go back and check the basics, removed led strip to give a proper 'night' time, changing light cycle to 20/4h no more 'exotic' 22/2h, re-checked the light distance every 2 to 3 days to ensure 60-45cm and I can tell all ready she is loving it. Also added home made Co2 made with 1 tsp of yeast, 3/4 tsp of sugar 700ml of warm water in a 1l bottle with a tiny pin hole on the cap. 11/12/2019 - Fed her 1.5l of 6.5PH water with 0,5ml of each Grow, Bloom, Max and Alga-mic, and 1ml of each Heaven and Vera,noticed about 10% run off. 12/12/2019 - 8 weeks have passed and no flowers I guess I'm flipping to 1212h to see if she reacts.
Likes
80
Share
Hi all. Welcome to this run withbthe Viparspectra XS1500 which i was kindly sent to try by their helpful rep Valerie. As I have a fairly good space to use for my main grow , it seemed an ideal time to explore a few options while I wait for space to appear following upcoming harvests. The opportunity hit at a good time and has now driven the future play time. lol The light is a full spectrum 150W( at the socket) , Dimmable and very well made unit. As summer is here now , my concerns of more heat being an issue have stopped me from adding my other light so the smaller 2ftx2ft area covered by the XS1500 is a good option , The heatsink is built into the case design with a finned top to dissipate the heat so no noisy fans. Switching it on to full power was a nice surprise as the footprint was way wider than I had expected and the actual coverage is even better for my Nursery to harvest plan.... I am growing autos perpetually at present and have been able to throughput the plants with just 2 lights and using the overlaps at the edges to bring seedlings along to veg/flowering, as harvesting is finishing. The timing had been working well but the plants were getting smaller towards the last runs . I gave it some thought and Rh % came to mind. With the perpetual runs not having a higher rh in their veg periods due to other plants needing a lower Rh% in flower , the vapour pressure deficit (vpd) was not within veg periods healthier range. This current run has exploded and filled my normal space very quickly which in turn means I cannot use the same principle as the last perpetual run of bringing the next ones along ready for the exchanges. The XS1500 takes care of this issue with it being perfect for an initial nursery light that is easily covering all the new seedlings but is also able to cover my experimental "5 plant 1 Pot" attempt. I have placed 5 of my own autob seeds from a previous seeding in a single 60 L pot and intend to strip them to their 4th nodes and only allow 2 mains per plant to develop and flower. Inam hoping to have 10 mains growing in it that will be under the xs1500 solely as the other plants outgrow the lights footprint and space they are in. They will go into the main grow space once able so i can really see how well this new light can flower with the 10 mains to fill the space. Until that point , I will diary as we go and see what we can achieve.
Likes
9
Share
9/22 topped them at 4th node. some of them are looking better for mainlining that others. some of them i may not mainline and others i left an extra node in case i want to keep clones around. #1 is looking happy with the topping and looks really good. #2 is the only one thats been praying and is the tallest and strongest looking all around. #5 short and such tight internodal spacing that it makes it hard to see whats all there. just looks like a bunch of small leaves until they grow out. i may not mainline this one either be cause of it being so tightly packed it may make it 9/27/24 day 20 theyre growing quite well. #1 i ended up taking the bottom nodes. i was originally goi g to use them as clones later on but decided to just let her go with her 4 nodes. #5 is so tightly packed, she has like 8 mains all in such a small space, its hard to even make sense of it all.
Likes
7
Share
@Snakeking
Follow
One thing is obvious they are all same in structure and bud formation and even maturing and this is very good for who wants to plants in land in quantity. I plant 6 gorilla skittlez from barneys farm and the came out 6 different pheno but this 3 gorgeous persian mood from art genetix are like real sisters. I believe heaven should smells like my balcony:))
Processing
Likes
7
Share
@Kushizlez
Follow
(Days 28-35) (Day 29) Everything seems to have recovered fine from topping so I transplanted into their 1.7 gallon pots. They were pretty rootbound so this should make them nice and happy. Going to start LST after recovery. Got a ton of holes poked around the rim of the bucket which should make tying down easier. I’ve been asking around on some forums and reading some articles and I’ve decided to switch out my MH bulb for the included HPS bulb. Apparently HPS bulbs will stretch the nodes out quite a bit more and provide higher PAR value for the same amount of electricity. My plants are looking pretty small for day 29. Although, that could just be from stuffing 15 plants under one 250-400w light. I’ve been powering the lights up to 400w at night and back down to 250 during the day. 400 just gets it too hot during the day (86-88) without ventilation. That temperature should be fine in veg once my co2 has really built up some mycelium. (Day 32) Just got 14/15 topped. The BCTG runt is just going to be lst’d and not topped or fimmed. I decided to just fim the plants I started later so they’d have a bit more time to recover and catch up to the others. I also LST’d all 9 quite well. Almost had a stem break but she’s doing just fine now. The deformed bbb was accidentally fimmed and as a result it’s got a very trippy looking main stem that has branched off into 6 mains. I definitely have fungus gnats. Fuckers must have got in with that coco I bought from hydro store. This has never happened to me with just promix but the benefits of coco are too much to pass up. I might order an OG BioWar/capsbennies/grubgrenade to help naturally get rid of them. I’m getting some confirmed yellowing on bottoms of the zkittlez and WW’s. They must be heavy feeders because no other plant in the tent is getting yellow like that. I’m going to feed a compost tea, top dress everything at full strength and mulch in some worm castings to help break it down faster. Will also do a foliar spray with some insect frass, microbes and m1pps. (Day 33) Got some more of that marine phytoplankton stuff to help stabilize my RO water. It’s got a good amount of soluble magnesium and trade minerals in it so that should help stop the yellowing on the zkittlez and WW. (Day 34) Things are looking great so far and they’re all recovered from topping/transplant/lst and thriving. Some slight yellowing and a few of the plants are cupping from heat and high humidity. I just put in a dehumidifier to help bring the rh down. The m39/zkittlez bagseed plant is just outpacing everything in the tent by 4-6 days. No wonder organized crime used to grow it. I hear it can completely flower in 45 days with a solid yield and very little trimming or leaf matter. It’s very weak on the high and smell though. Nonetheless it should be nostalgic to try those old terps. There is still a small chance that it’s a super vigorous zkittlez plant too. Plants should be showing sex this coming week. Hoping for 8+ fems but I can make do with just 4. 1-3 is unlikely but that would piss me off beyond belief. I’ve heard of it happening though.
Likes
15
Share
Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Umstände
Likes
18
Share
Que pasa familia, vamos con la segunda semana de floración de estas Tropicana Cookies Fast Flowering, de FastBuds. Vamos al lío , las 3 plantas se colocaron en macetas de 7 litros definitivamente. El ph se controla en 6.2 , la temperatura la tenemos entre 21/24 grados y la humedad ronda el 50%. Ir van creciendo y no llevan ni mal ritmo ni mal color, veremos como avanzan las próximas semanas y como van formándose las flores. Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨
Likes
3
Share
Likes
18
Share
Room Info • Flower room: 2.4m x 2.4m x 2m • Lights: 4 x Gavita 750w (with Gavita master controller) • Irrigation: IWS Flood & Drain Pro (with custom 25L pots) • Lung Room: Intake air is coming from my lung room. Inside that is all the controllers, intake fan, 350L reservoir tank, a large air conditioner and a 3kw heater • Extras: 2 x 6" RVK Fans with DiffuseAir attachments; Custom MistMaker Humidifier -------------------------------------- Week 1 of flower • Midweek I found fungus gnats hanging around the pots. I pored 2 liters of 0.6% hydrogen peroxide into the top of each plant. Then 2 days later watered in some beneficial nematodes (Steinernema spp.) and topped the pots with a decent layer of GnatNix. Bye bye gnats. • I noticed the EC value drop in the nutrient reservoir. Next week will need to be slightly higher. pH stayed pretty stable. • At the end of flower week 1, I did an under trim of any bud sites that would never make the surface. I do this to stop any fluffy buds from developing underneath. I want big dense buds on top only.
Likes
7
Share
@Riddle
Follow
Week 2 - the growth is very good and I can see a healthy root development at the bottom. I watered twice this week - a little dryback in the first weeks should be good to promote roots. DLI 20 / EC 1.2
Likes
2
Share
Week went smoothly cant complain....cutting are doing well also took 4 cutting of seed(think it's from applelicious) they already rooted n transplanted going to veg for a lil n send to flower to see if it's worth
Likes
11
Share
Likes
16
Share
Pink Truffle continues to impress in week 6 with a clear increase in flower density and resin production. The buds are stacking tightly across every branch, creating compact, frosty colas with excellent bag appeal. Trichome coverage is now heavy, extending well onto the sugar leaves, while the terpene profile becomes richer and sweeter. The plant has maintained great structure throughout flowering and is now entering the final ripening stage with outstanding resin potential. Seeds by World Breeders Cultivated by Piperoots 🇲🇦 🌱🔥
Likes
Comments
Share
@Cultiv8or
Follow
Transplanting these this week.
Likes
19
Share
Rolling into Week 15! It’s been a pretty quiet one on the home front. Looking at the buds, they still don’t quite have that 'ready for the chop' look just yet, so it’s officially a waiting game from here on out. Patience is definitely a virtue at this stage! One big win this week was the environment: thanks to the low ambient humidity outside and in my apartment, the tent climate has stayed perfectly in the sweet spot without much effort on my part. It’s always a relief when Mother Nature does the heavy lifting for you! Just keeping a steady hand and letting her finish up at her own pace. We’re getting there, slowly but surely. May the green thumb be with you 💚
Likes
15
Share
Everything's going good, just water till harvest now. Very Berry will be coming down between the 17-24 of march and the stone cold diesel will be coming down between the 23-30 everything in my house smells like this tent, that's with venting outdoors and running scrubbers. Hands down that stone cold diesel produced some funk , like almost gag funk, the berry is berry smelling of course with gas notes behind it.