😋😋😋😋

White Domina is covered in white hairs with a few starting to change color. Seems like it shows no other signs of wanting to slow down. Buds are still stacking a few nodes up top and the lower ones are starting to cover the stem. Getting really smelly this week too. Flowers stacking hard and Still drinking 6-8 gallons of water every 3 days. Getting oranges hairs and resin production is ramping up. I was able to get a batch of boogie brew in this week. I also went ahead and added the bee pollen I was curious about. It has lots of ammino acids, and so does the fish fertilizer i have but I don't like using that in flower so maybe this could help. Its been sitting around for years and says its expired in 2019 though i don't think it ever really goes bad unless it moldy or something. I figure at worst I piss off some people for being curious. So i dissolved it in some water and added about a cup to about 40 gallons of water. Each plant got roughly 1/4 cup. I been pushing these plants to the limit. I haven't been wanting to turn my lights down because they are helping to keep my humidity in check. Even been running the de-humidifier day and night now. Also been trying to go an extra day between watering to keep the humidity down as well. it was over 90 percent humidity much of the weeks outside. The thermostat got messed with mid week and temps in the tents got to 92 again a few hours at the end of their day cycle. I think this week I will adjust the lights to turn off 30 minutes sooner, and try to get them to start drinking a little less water.

En esta primera semana mantuve las luces muy alejadas lo que provocó un estiramiento prematuro lo que a mi gusto no me gusta mucho a sí que para la siguiente prepararé un transplante. In the very first week I kept the light so far so the it create a early grow on the structure but for me its not so good so I prepare a transplant for The next week.

June 26, day 98, the Euforia is in it's final ripening phase, and will be harvested soon! I am dialing down the EC, although I do not do any major pre harvest flushes. June 28, day 100, emergency harvest time! I was going to push it another 3-5 days, but when I was examining my fattest cola I noticed the physical manifestation of my nightmares: early stage bud rot. I should have harvested days ago in hindsight, as days of rain pushed my RH up into the mid-high 60s. I only noticed it because I was bending bud tissue away from the stem, but there was clearly some white fluffy buildup around the base of a dead leaf stem. The good news is that I caught it very early, no bud tissue has died anywhere on the plant and what mold I could find was still white and fluffy. I had to immediately cut down the whole plant as a result. I cut away bud material around the few moldy spots, and put the rest of the buds from those colas into my pile for edibles/oils. 95 percent of the colas seem totally unaffected. Nevertheless, I have had to totally switch up my dry/cure technique by doing a wet trim of the large buds and a quick dry/cure to start to make sure no spores can spread elsewhere. My priority is really saving what has been accomplished so far. The good news is that early wet weights are very heavy, even with the bit of bud removal. 600g wet for the top colas, another 350g wet for the mid grade buds, and finally 1000g for the low grade buds left of stems for slower drying. This means I will hopefully end up with 200g+ dry bud for vaping and smoking, and much more for edibles, rosin, etc. I will have more details next week with the full harvest update!

Man oh man,without noticing I just found a new favorite strain man.Love the strong fruity and floral aroma coming from these flowers I can't wait to grow her Photoperiod version,it's been a pleasure to grow her,unfortunately I lost her four sisters,I would love to get a lot of full jars of this amazing haze 👃🔝🔝💚

Welcome to Flower Week 3 of Kannabia Clementine Slush BioBoost Edition Need a Fail-Safe Germination and Express Flowering?Kannabia Makes It Easy with BioBoost, Sproutly and Its Fast Genetics . More informations to find at The Kannabia Blog on GrowDiaries. Check out Kannabia Seeds with my link [https://www.kannabia.com/de?ref=61966] and grab the germination device or the strains I used . Trust me – it’s worth it for sure ! Get another 20% Discount at all products using the code [GGD] at the checkout For this Project , I’ve chosen the Feminized Photo Strain Clementine Slush BioBoost : Here’s what I’m working with: • 🌱 Tent: 225x150x150 • 🧑‍🌾 Breeder Company: Kannabia Seeds • 💧 Humidity Range: 50 • ⏳ Flowering Time: 65 Days • Strain Info: 21%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 20 • Nutrient Brand: Hy-Pro • ⚡ Lights : 600W x 2 A huge thank you to Kannabia Seeds for allowing me to try my Best with this amazing collection from Photo Strains they managed to Sponsore . Big thanks for supporting the grower community worldwide! Your genetics and passion speak for themselves! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!

Stand by for dry weight

Week 1 of flower

Растениям от IZI осталось дней 7. Анубису дней 10-14, CloudWalker'у от двух недель, максимум 3, фенотип сативный + поздний зацвет (почти на неделю позже) Как тут внести новые удобрения? Добавить его в базу. Хоп-хей спамеры, кто зарабатывает хуй знает сколько в час? Общий вид не возможен - сломалась камера, только макро.

ROSEGROWS RecRoomProRun1

Plants are in dry pode since 8 days Now. I decide to stop flowering besause a few yellow bananas start showing up. That was time. By the way, I taste the fresh weed before making my decision and… damned, it’s a great one !!!!! 😁😁😁😳😳😳😎😎😎

Well down to 1. Had to harvest miss mullberry, on day 79 she was mostly cloudy and right amt of amber for me ill get back with dry weight...the compton qoolaid yeilded 3.39 oz, but this blutane girl i am impressed with the most still feeding every other water at a 1/3 dose and she eating every cola is huge and super dense and smells amazing. The video is blutane and trimmed is CQ.

26.1.25: I have had a mistake 😕 i spilt some Fish Mix as I was experimenting with a syphon from some aquarium tubing I have. Unfortunately, I forgot to take the syphon out! Ugh 😣 However, it is fish emulsion and very thick consistency. Therefore, I was able to scrape it up with 2 of my business cards up off the counter. So added this extra into the next 2 ltr solution I mixed. All plants were watered with at least 1ltr of dechlorinated water PH'd to 6.3. Containing the following nutrients;- ♡ 3ml Seachem Seaweed ♡ 4ml Biobizz Fish Mix ♡ 4ml Biobizz Bio-Grow ♡ 3ml Biobizz Bloom ♡ 2ml Xpert Nutrients Bloom Booster ♡ 2ml Xpert Nutrients Cal-Mag ♡ .25g Ecothrive Biosys. ♡ 2.5g of Bicarbonate of Soda as PH UP. Unfortunately I have broken my PH pen too. Accidentally submerged it under water, then the readings went crazy. I'm leaving it to dry by standing it up but I'm most likely going to need a new one, which is extremely annoying 😑 I'm going start implementing the Scrog net probably some point next week if I let the plants that are in flower to just grow up now, as I do believe that I stunted Watermelon 🍉 by using too strenuous LST. Hopefully the plants still are able to grow upwards at this stage during flower for all the Purple Punch P1, P2 and P3. We will soon see! 28.1.25: My PH pen has packed up 😣 I've got to wait to get another. It's super annoying 😑 so I'm just judging by memory how to regulate it. Unfortunately, that's my only choice! I'm also out of the dechlorinator 😕 things are not going very well this week so far 😅 I guess we will have to make do, until I can get replenished. 29.1.25: I removed all the plants, hoovered, and disinfected the tent. There were several accidents when watering, causing some debris and splashes. I decided to just go ahead and get a few other things done. It's crazy how quickly things can become neglected! 😣 So I defoliated moderately on all plants except Gorilla Cookies seedling. I have absolutely dropped the ball on my lighting situation! My light was much further away than I thought! I turned it up to 100% and dropped it down to just under 2 feet away. After I reset the tent, I set up my scrog net. I removed 80% of all LST pegs. I am planning on letting the scrog net take over the training from here. I really want to minimise the risk of mould, so I decided to start using my dehumidifier. It has raised up to 73% RH this week, so it's necessary. Hopefully, I will be able to get my dechlorinator and PH pen soon! That's kind of essential to me. It's been a little bit of a stressful day in the garden, to be honest 😅 30.1.25: So I am expecting the arrival of my new PH pen today, as well as my new bottle of Ecothrive neutralise. It is supposed to measure the TDS and EC in addition to the standard TEMP and PH, which I had previously. Obviously, time will tell if it's any good or not. I realise, much too late now, that my lighting is very insufficient for this many plants. I need double the watts at least, and coverage is very poor. I remembered I had an old LED floor lamp, which was in a corner being unused. I decided to take the stand off, and Zip tied the pole onto the tent pole at the back left corner. I have no idea what the wattage is, and it's quite pathetic 😅 but I mean, I might as well use it, being as I definitely cannot afford more lights! 😣 Next grow, I will probably only grow 2 plants, max 4, and just use larger 7-10 Gallon pots. Being as I ran out of dechlorinator, I only watered some plants properly because I only had enough to make 6 litres. When my pen arrives, I will get everything properly watered. 31.1.25: The leaves of several plants are showing signs of iron deficiency. This is likely due to my PH pen packing up earlier. I now have a new pen. Due to this, I decided to use my Seachem Prime, which I use for my aquariums. As I wanted to get them watered properly, and my Ecothrive Neutralise hasn't arrived yet. I watered each plant with 1ltr of dechlorinated water PH'd to 6.0. I added .25g Ecothrive Biosys to the water. May give them a breather on the nutes and just use the Cal-Mag and Biosys. Being as I've just topped dressed with rich fertilisers, I'm sure that will be OK for the next several waterings. 1.2.25: Watermelon 🍉 has started flowering. The size and shape of her is quite laughable 😅 Retrospectively I started the LST too early and went in too heavy with it too. That obviously wasn't a great idea. Still, this is my first run attempting to do LST, and I have a whole bunch to experience and learn from here! 😅 We may get lucky with a stretch. Who knows right. I remember this one was supposed to finish really early, like 10 weeks or something so hopefully will get at least a bit bigger 🤞 Also the new growth is still a little bleached out. Hopefully the switch to a functional PH meter will correct the imbalance which may have occurred due to my previous one packing up. Snipped another couple leaves which were annoying me 😅 I realised this is one of the pots I put my clay pebbles the bottom of. So I've probably not been watering enough, as she's right at the back, and assuming all was good because the pot was heavier. Removed a couple of leaves from Bubble Kush

S1 62g S2 67g S3 81g S4 74g Total 284g

First time grower, criticism will be well recieved😀 Two plant ebb and flow setup in a 3x3 as a test run Top feeding until I can afford the rest of my setup🙄 Started seed in water balanced to 6.0 Sat. Feb. 29th Tap roots within 12 hours, directly into pre soaked rockwool cubes. Broke the surface march 3rd. Began 1/4 strength micro, grow, bloom and stress relief Using very hard water for the next couple days, roughly 450 PM out of the tap. Ro system to be installed march 6th Ro system now installed. Start of week 1 will be Saturday the 7th of March. Day 2: Turned the light down to roughly 50%, instead of raising it, due to the fear of light burn. Will look into it soon. Plants seem to have recovered after I decreased the light intensity. Fan and filter purchased. Alternating flush and feed cycles 12 hours apart to keep salt sats down. Day 3: Bumped light intensity back up to roughly 75% of the ts1000's capability or 700 "light units" from a cheapy 3way meter. Adding as much co2 as I can through baking soda and dilute phosphoric acid. Day 4: Exhaust fan with climate control installed March 10th Day 5: Girls exploded now that I have my salt build up figured out . Day 6: Light back up to 100% Day 7:little droopy on the one plant, gonna let them dry out a day Setup should be complete for start of week 2.(actually sick right now and having trouble getting supplies) Still need a flood table setup.

Last flowering update, already harvested. Coolest song intro ever .. 😂 They look a bit sad, somehow mix of drought and natural end of life. Was nothing to do but wait for harvest.. or more like convincing my self to do the worst part of growing. I love the smell of cannabis.... this was just cruel and hurtfull. I am so happy I canceled my outdoor plans with this strain, if you have any respect of your neighborhood it's just not possible. 😈 After 1 month my new filter gave up, headache and sick after harvest. Completely off the scale.. sickening. (Perhaps something good because it has enough potential to smell that bad 😂) Likewise stickiness... it was all over the place, my tumble trimmer gave up because it's soooooo gluey the buds stuck together and it's nearly impossible to separate.💀 So ... idk I think bubble hash makes few sense for small batch grower and I did not want to do it ever again.. but I would highly recommend fresh frozen bubble hash. Or a big enough box with some furniture to harvest inside. Then again.. you are not a small batch grower 😂 Anyway, I don't like harvest at all.. so my negative things are probably real good signs for a highly potent product. 😅 The looks were not like I wanted, but nice phenos and 1 (Stan) midway looking. Very fast, could've harvested earlier. High trichome density, which are spreaded everywhere. If you are not going for bubble hash (which I think would be awesome with this strain), I'd recommend go for few buds or just headbuds/SoG.. harvest would be quicker. 😜😹 As I was not sure about the stretch I flipped very fast, as the stretch was midway they could've had one more week of veg to get some height. Luckily this is probably one reason the yield was not too high. Bud sizes are more or less in the same range on one plant. I couldn't reach Stan for proper Lolly and training, but they are all round about ~200g wet, so cutting off some stuff didn't have major impact on the yield, but the reduction really helped to stack up the remaining buds. Harvest update after cure or rosin tests. Otherwise I'd be too lazy for the rest. Thanks for the interest, if anyone had some 😘 Next update in 1-3 months 😎👻 “I can still blow up planets for now, but I am very hungry.” — Lexx “There is no right place for the dead - to live.” — Kai “Goodbye, little blue planet! I feel good - how about you?” — Stanley Tweedle “Wait a second - if that's a country, then doesn't it possibly have lots of people?” — Zev Bellringer

Hello my fellow Growers👊 It was another Great week for the Kush Fromage 🙌 All the pictures were taken on Sunday, which was Day 42 of Flower. She is really starting to reek the whole area up. It is a very earthy kush like smell with fresh grapes on a grapevine mixed in, it's a very unique smell😊 She is supposed to be a very heavy resin producer and have a high THC and CBD content. Anywhere from 18-26% THC and ~3% CBD according to the breeder. I can tell you this it is one very very resinous plant😵 even the fan leaves and smaller leaves that have no trichomes on them have developed an oily resin on them. It's awesome so I can definitely say it is a heavy resin producer. If a sugar leaf touches another leaf you can see an oily resin where it touched it, my fingers get sticky just from the fan leaves👍The breeders estimated time of Flower is around 63 Days. So we got a few more weeks to go!! I hope the buds will fill in a good bit more but I am not counting on them getting huge due to this strain being more on the quality over quantity side of things. It's not a bad producer and I'm sure they can get some pretty huge flowers on em, but I have seen plants that can produce way more, but this strain makes up for it in its potency and resin production. Plus I personally like the Quality over quantity strains. Though at least nowadays its nice that we have a lot of strains that are a nice compromise and have great yield while also having great quality😎 Thank for stopping by and checking out the Grow👊👍 Happy Growing an plentiful Harvests to you all!!🙏

This one’s due for a little cleanup before she hits bloom cycle. Everything in the auto tent has taken very well to the Mills Nutrients.

Another good week in the garden. These girls are finishing up now. Some will be picked over the next few days and some will go another week here. Got some recharge and mammoth P for the first time three days ago. Hoping to finish strong 💪