Likes
2
Share
Gave them transition nutes this week and they'll be going into the flower room today. 🌺 I grabbed some clones from these girls but they ain't looking too hot rn. The runt I left untapped so hopefully it catches up with the others during the stretch. 🤷‍♂️🏽🌱🌿
Likes
14
Share
After I repotted the plants, they grew really well and healthily for 12 days. Now they are showing iron deficiency again... I already had the problem before repotting. The pH value of the earth has fallen again to 4.8 to 5.7. This time I used biodegradable braids to germinate. I believe that this is the reason for the PH fluctuations in the soil. Every time I water I measure the PH and adjust it to 6 - 6.5. Nevertheless, the PH value drops back to 4 to 5. I'm trying to correct the problem. I also work with neemoil because I can't get rid of the trips
Likes
252
Share
Welcome to Bud Boutique Grow Diary - really appreciate all your love and support :) Dont forget to check out my other current grows! 🗓️ This Week: - buds getting to their final formation - water uptake really slow now - extended feeding each 4th day instead of each 3rd slowly coming to an end ✂️ ___________________________________________ --- 🌱 Strain --- 🏷️ LEMON DRIZZLE by Barney's Farm https://www.barneysfarm.com/lemon-drizzle-649 ---💡 Lighting --- 💡LUMATEK ZEUS PRO 600 https://lumatek-lighting.com/zeus-600w-pro-29/ --- 🥗 Nutrients and Feeding * 🍸 PLAGRON Algae Baseline grow/bloom + Additives: Power Roots, Sugar Royal, Pure Enzym, Silic Rock, Power Buds, Green Sensation * 📅💪 baseline grow/bloow: 4ml/l & additives: 1ml/l each https://plagron.com/de/hobby/produkte --- 🏭 Grow Setup --- * 🏠🌿 Indoor: Homebox 120x120x200cm (4x4) * 📐🌀 PrimaKlima exhausting Fan 1180m3/h (running on 60-80%) & Can Light Filter 800m3/h & 1x Fanbox 1x Dyson fan for Air circulation https://primaklima.com/de/shop/ventilatoren-de/ec-ventilatoren/pk160ec-tc/ https://canfilters.com/products/filters/ All Likes and comments are highly appreciated!!! don't forget to check out my Instagram: budboutiquee <3 - Bud Boutique
Likes
38
Share
Shes been chopped. Took some early samples and it is some sweet dank bud. Will update harvest soon
Likes
63
Share
@MarcXL
Follow
Easy grow cycle, 5 weeks of vegetation and 7 to 8 weeks of flowering and they are good to harvest. For drying I only removed the bigger fan leaves. Now they are hanging upside down in the tent to dry for about 8 to 10 days before trimming and getting a proper dry weight.
Likes
21
Share
Salut amis cultivateurs ✌️✂️🌿 Aujourd'hui je pose la nouvelle semaine 🗓️ Comment vous dire que je suis impressionnée ❗ Les plante ce développement a merveille voyait par vous même 🙏 Elles ont fortement grandi, je suis monter a 1.5L par plante, elle consomme la totalité des nutriments et me le montre très très bien 😍🤗 Merci Kannabia 🙏 encore des variétés merveilleuses 😊 J'espère que dame nature sera me récompense 🌿🍁 Pour plus d'informations par rapport à ces génétique, je vous laisse cliquer ici : https://www.kannabia.com/fr
Likes
37
Share
Pictures are taken on day 105 / flower day 49 📸 ********************************************** They getting super frosty and gaining weight, I hope the buds getting bigger in size. 🌹 The nematodes already killed all fungus gnades. 🐛 Happy growing🌱
Likes
2
Share
Doy comienzo al SoG de OG 24K de Bsf 🌱🧐 Hace frío en Santiago de 🇨🇱 pero en cuarentena nada mejor que plantar. Estas son 12 og 24k en macetas de 3lt de momento aunque serán las 12 macetas de 11 o 7 lt. Esperando que hagan una buena raíz, las tendremos 4 semanas en 3lt y luego transplante. Quedo atento a comentarios y sugerencias, es primera vez que tiro 12 en un metro. 🤠😲🤭
Processing
Likes
12
Share
@Tazard
Follow
Wow what a week. We are at 48” as of day 20 on the Enemy of The State plants (both are the same height now). The two White Criticals were 36 and 38 inches from the top of the tanks and the taller tops on Purple Purple are about 34”. Wedding cake is about 30” now. All my plants seem to love the 5.2 pH. Enemy of the state are on a lighter feed of about 950ppm and wedding cake is still eating from a vegetive reservoir at 1125ppm. Thanks for looking!
Likes
45
Share
The cannabis strain Grape Guava can be a purple strain, depending on its specific phenotype and genetic makeup. While not all phenotypes of Grape Guava are purple, some variations, such as the Zatix Grape Guava, are noted for their striking purple appearance due to the genetic expression of anthocyanin pigments. https://www.youtube.com/watch?v=cKdVmdoKJ5k In a garden of green, Grape Guava gleams, With its fruity aroma, enchanting dreams. Clusters of grapes, guava's sweetness ignite, A strain so divine, in purple and white. Euphoria whispers, a lush fruity haze, Grape Guava's embrace, a tranquil daze. Off and away.@1400ppm. The increased CO2 allows plants to thrive at higher temperatures, which in turn necessitates higher humidity to maintain the ideal VPD for healthy growth and transpiration. 80F -5F = 75F LST with 70% RH = 0.72 kPa. Higher temperatures and humidity promote rapid growth, nutrient uptake, and photosynthesis while maintaining a lower stress level. Temperature influences the rate of enzymatic reactions involved in aerobic respiration. Enzymes, such as those involved in glycolysis, the Krebs cycle, and the electron transport chain, work most efficiently at an optimal temperature range. In low temperatures, enzymatic activity will slow down, thus reducing the rate of aerobic respiration. In high temperatures, enzymes can become denatured, thus impairing their function and stopping the process of aerobic respiration. Glucose is the primary fuel for aerobic respiration. The rate of aerobic respiration increases with the availability of glucose, as it is the starting point for glycolysis. If glucose levels are low, cells may rely on alternative energy sources such as fatty acids or amino acids , but these processes may yield less ATP or be less efficient. To determine this effect, carbon dioxide volume was measured (as carbon dioxide is an output of aerobic respiration) 18/6 with the 6 being IR. The near infrared (IR-a) borders around 700nm up to 1400nm @ photon par flux density of 1.8 instead of darkness, keeping temps overnight a neat 77F-80F. Think of my tent as a lung. What goes in must come out. When the rate of air going out exceeds the amount of air coming in, it creates a negative pressure. Tent concaves (bends in). If set up correctly, your RH will begin to drop slowly to the desired level you set, and the extraction turns off when it reaches 50% RH. The plant, as it performs cellular respiration, will always be releasing more water into the air, so the RH% of the tent overnight will always increase, so long as oxidative phosphorylation is occurring. As soon as the RH% creeps back up to 55%, the extraction turns back on, over and over. This creates a strong pressure differential which will work wonders on your grow. Replicating high and low-pressure fronts in nature. Critical for oxygen diffusion at the critical time of peak cellular respiratory function.. Moisture will not transfer from a saturated atmosphere to another if that air is already at or above its saturation point, meaning the air can't hold any more water vapor. Once I understood that water is produced as a by product during cellular respiration, specifically at the very end of the electron transport chain (ETC) where electrons are finally transferred to molecular oxygen, the higher the RH of the air, the more resistance there is for more moisture to be added to that environment, and effects the ease with which it does so. But none of that water comes from the pot; it's pulled from the air. If you run high daytime RH, your medium/pot is 100% reliant on transpirational root pull to move water. ZERO evaporation happens across the atmosphere if the tent air has high RH%, the medium cannot release its water through evaporation. Once a canopy develops, light no longer slowly wicks and evaporates from the topsoil. The Soil-Plant-Atmosphere Continuum (SPAC) describes the continuous pathway and process of water movement, driven by a gradient in water potential, from the soil, through the plant's roots, stem, and leaves, and finally evaporating into the atmosphere through transpiration. There is evaporation, there is transpiration, and then there is evapotranspiration; Evapotranspiration (ET) is the combined total of two processes: evaporation (water lost directly from soil and surface water into the atmosphere) and transpiration (water released from plants to the atmosphere through their leaves). Evapotranspiration represents the total amount of water that moves from the medium into the air. There is no such thing as a medium with too much water, only a medium that retains too much for too long. The water must always flow efficiently from one atmosphere(Medium) to another(Air) in a timely manner. Moisture is a critical factor for bacterial growth and decay. Dictating how long it's allowed to sit in any one location for any given period is a key preferred control. To ensure a net reduction in a bacterial population, the rate of removal (ET) must exceed the rate of bacterial growth (decay rate), which is often modeled as a growth rate for the specific bacterium under the given conditions. By optimizing daytime VPD, we also optimize conditions for bacterial growth to explode exponentially above 77°F.. If water is allowed to sit in a medium without an escape within a timeframe, nothing good will happen. IF High RH is maintained overnight as well as during the day, placing 100% of water movement at the behest of daytime transpiration, roots can only pull where they can reach, and if soil is compressed above a certain point, moisture will become trapped in a medium with no way of moving day or night. This will begin the countdown for decay to take hold. When water stagnates in a medium, it loses oxygen, creating anaerobic conditions that foster the growth of harmful microorganisms like bacteria and fungi, which can produce toxins and disease vectors. Thigmomorphogenesis, the process by which plants respond to mechanical stimuli like touch by altering their growth and development, results in significant morphological changes to improve survival against mechanical perturbations. This complex response involves sensing touch and initiating physiological and genetic responses, leading to changes in form and structure over days or weeks. The process is triggered by physical forces such as wind, rain, or touch. Plants adapt to these stimuli by changing their shape and structure, which may include slower growth, thickened stems, or altered leaf development. Plants possess sophisticated mechanisms to detect even subtle mechanical stimuli and initiate responses. A variety of molecules, including calcium ions, jasmonates, ethylene, and nitric oxide, are involved in signaling these mechanical inputs. Touch can induce the expression of genes that encode proteins for calcium sensing, cell wall modification, and defense mechanisms. A plant exposed to constant wind may become shorter and sturdier. A plant that is touched frequently might grow more slowly to conserve energy and develop thicker cell walls. These changes increase a plant's resilience and ability to survive in harsh environments. Let's get Thiggy with it.
Likes
21
Share
@darb35
Follow
Last week was a short one, decided to chop them on day 80. Both plants weigh at 800g wet, hoping to get a bit over 100g dry. They could probably go for another week to get fatter, but I was feeling ready looking at the trichomes. Hope the dry slow, I can't get RH above 50% so hoping that won't be so bad.
Likes
2
Share
@fadagrow
Follow
Yo! Week 3 is rolling along, and things are looking pretty sweet! The plant is vibing well with the Canna Terra nutrients. I’ve been sticking to that medium dosage, and honestly, you can see the difference in just three days—those leaves are popping! I've also kicked off some low-stress training this week. Just gently bending and tying things down to give it a nice shape. Can't wait to see how it all turns out! Excited for what’s next on this green journey! 🌱✌️mm
Likes
27
Share
Yellow tips otherwise all good Idk if its nute burn or other issue trying to get it fixed 😄
Likes
2
Share
📆 Semana 7 El cultivo entra en pleno engorde final. Los cogollos continúan compactando y apilando cálices, mientras los pistilos empiezan a disminuir su actividad. La resina se intensifica, cubriendo cada vez más las flores, con tricomas pasando de transparentes a lechosos. La planta mantiene buena absorción y dirige su energía a densidad, potencia y maduración. Seguimos creciendo fuerte 💪!
Likes
299
Share
Hello to you all. As a true visionary I decided to go FULL HYDRO this week, that means water in buckets and outside the buckets /s This grow turns out to be an uphill battle but i already decided to bring it to completion no matter what...Icy weather, floods, alien invasions what's coming next a big bank crash?! I'll bring this grow to the end! Who needs banks anyways when you got #coins ;) On 22.02. added nutrients to the 140 liters of solution. That's it, I hope to see y'all next week growmies.
Likes
79
Share
@Salokin
Follow
Hey Growmies! I'm thrilled to share my latest project: two exceptional grow environments, each a lush green haven with 9 plants on plant rollers. We’re employing a blend of Scrog (Screen of Green) and Sog (Sea of Green) techniques. Each plant has its individual ScroG, directly connected to its air-pot, facilitating easy mobility and care within the tent. As the Room is on the cooler side at the moment, I've set up a Solea infrared heater, controlled by an Inkbird ITC-308 temperature controller, to maintain a cozy climate. Each tent is also equipped with a Spider Farmer Cool Mist humidifier for perfect humidity levels. Initially, I planned for identical setups in both tents, but adaptation is crucial. I encountered a challenge with the UR45 lights due to their single plug and UV/IR switches. To overcome this, in Tent 1, I’ve installed two UR45 lights: one dedicated to IR and the other to UV, each managed by a Meross smart plug. The Mars Hydro app manages the light and in-line fan controls in Tent 2, though it has its limitations. The ITC-308 takes care of the infrared heater, while the humidifier regulates itself. I'm really into this setup, but I'm already thinking about upgrading to a single grow controller for all devices. Excitingly, ‘Epic Buzz’ in Tent 1 is competing in the Tent-X Ultimate Grow Challenge sponsored by Trolmaster, who has also sponsored a Tent X Controller for this tent. This addition will greatly enhance our control and monitoring capabilities in this tent. This grow season is extra thrilling as I’m collaborating with Anesia Seeds and Ganja Farmer Seeds. They've provided some amazing strains. Tent #1 houses ‘Epic Buzz’, ‘Red Banana Pudding’, and ‘Pink Matcha Slush’ from Anesia Seeds. Tent #2 features ‘Caramel’, ‘GMO’, and ‘Bruce Banner x White Russian’ from Ganja Farmer Seeds. I’ll be documenting their growth in individual diaries. Check out these links for each strain's story: 1. Anesia Seeds - Epic Buzz [Grow Diary](https://growdiaries.com/diaries/189991-anesia-seeds-epic-buzz-grow-journal-by-salokin) 2. Anesia Seeds - Red Banana Pudding [Grow Diary](https://growdiaries.com/diaries/189995-anesia-seeds-red-banana-pudding-grow-journal-by-salokin) 3. Anesia Seeds - Pink Matcha Slush [Grow Diary](https://growdiaries.com/diaries/189993-anesia-seeds-pink-matcha-slush-grow-journal-by-salokin) 4. Ganja Farmer Seeds - Caramel [Grow Diary](https://growdiaries.com/diaries/190093-ganja-farmer-seeds-caramel-grow-journal-by-salokin) 5. Ganja Farmer Seeds - GMO [Grow Diary](https://growdiaries.com/diaries/190089-ganja-farmer-seeds-gmo-grow-journal-by-salokin) 6. Ganja Farmer Seeds - Bruce Banner x White Russian [Grow Diary](https://growdiaries.com/diaries/190091-ganja-farmer-seeds-bruce-banner-x-white-russian-grow-journal-by-salokin) For those curious or seeking inspiration, here’s the detailed equipment list for each tent: Equipment List for Tent 1: - Mars Hydro 120x120x200cm Grow Tent Dark Room - Mars Hydro Smart FC 4800 Samsung LED Grow Light – 480W - 2 x Mars Hydro UR45 IR & UV LED Grow Lights - Mars Hydro iFresh 6-Inch Smart Inline Duct Fan - Spider Farmer 6L Cool Mist Humidifier - Solea Infrared Heater 500W - Inkbird ITC-308 Digital Temp-Controller - 3 x Meross Smart Plugs (for UV/IR light timing) - Tent X Controller (sponsored by Trolmaster) - 9 x 12.5L Airpots - 9 x 30cm Plant Rollers - 9 x 36cm Plant Saucers Equipment List for Tent 2: - Mars Hydro 120x120x200cm Grow Tent Dark Room - Mars Hydro Smart FC 4800 Samsung LED Grow Light – 480W - Mars Hydro iFresh 6-Inch Smart Inline Duct Fan - Spider Farmer 6L Cool Mist Humidifier - Solea Infrared Heater 500W - Inkbird ITC-308 Digital Temp-Controller - 1 x Meross Smart Plug with Consumption Measurement - 9 x 12.5L Airpots - 9 x 30cm Plant Rollers - 9 x 36 cm Plant Saucers Always happy to hear tips or chat about gear with fellow growers! Can't wait to update you all as these tents transform Stay Lifted Salokin
Processing
Likes
21
Share
@Pedrojuan
Follow
Bueno, iniciamos bien la 5a semana, con EC y PH ideales, crecen mucho esperemos los cogollos se desarrollen bien... Estoy contento. Mantendremos el EC entre 1.8 y 2.0 por esta semana, la próxima iniciaré a bajarlo a 1.4 y 1.0 hacia el fin de la próxima, para después cambiar la solución y en las últimas 2 semanas el lavado de raíces y agotamiento de los nutrientes absorbidos, usare solo el ripen en esas 2 semanas. Si alguien pasa por aquí y quiere dejar algún consejo, será bienvenido.
Likes
5
Share
@Ensign420
Follow
Week 02 Introduction This week has been a bit of a struggle. Had my first experience dealing with slime and brown algae. But I think adding enzymes and increasing the beneficial bacteria helped to fix the issue. Also experienced nutrient burn for the first time. My nutrient solution strength got as high as 671 PPMs. So backed it down to about 430 PPMs during the end-of-week reservoir change. Also cut Hydroguard (expired?), CaliMagic, and Superthrive from this grow. Now she's still stunted, but is starting to recover. Hopefully... [START OF WEEK 02] Day 01 - Monday - 08/10/20 - Total Days: 008 ----------------------------------- - [0830]: Still looks a bit yellow. But getting larger! --- Solution strength was at 248 PPMs. --- Just topped off with a bit of distilled water --- PH went up to 6.1 so PH'd down to 5.8 --- Ran the top feed for a bit to wet the hydroton. - [2130]: She's looking even more yellow now. --- Even the new leaves are really yellow. --- Decided to add more base nutes. --- Added 4ml of Sensi A --- Added 4ml of Sensi B --- Now at about --- Solution Strength went up to 304 PPM. --- PH was at 6, --- Also raised the water level a bit more. --- I really hope it's a nutrient deficiency and not an over-watering issue. --- Please live! Day 02 - Tuesday - 08/11/20 - Total Days: 009 ----------------------------------- - [0830]: Looking less droopy. But still yellow. --- Decided to do a reservoir change. --- 4.5gal of distilled water --- 8ml of Sensi Grow A --- 8ml of Sensi Grow B --- 8ml of Voodoo Juice --- 4ml of B-52 --- 4ml of CaliMagic --- 4ml of Hydroguard --- 4 drops of Superthrive --- PH'd down to 5.8 --- Solution strength: 302 PPM --- Since I didn't want to risk over-watering the rockwool, I did not to do a top feed, may do one tonight after the sleep cycle (lights are still set to go off at 10am and back on at 4pm). --- As I was doing a reservoir change, I noticed that the tubes and bucket were a bit slimy. Didn't really stink or anything. Is this normal? Maybe due to the Hydroguard and Voodoo Juice? --- I hope she gets better soon! - [2215]: Getting larger! But still yellow. --- Also can see a root growing through the net pot! Tiny little thing but it's there! Will have to start dropping water once more appear. --- After looking over a few DWC diaries using AN nutes, seems like my solution strength is still too low. Most around this stage average around 500 PPMs with about 4ml per gallon. --- Top fed for a minute to wet the top of the hydroton. --- Solution strength went down to 263 PPM. --- Added 8ml more of Sensi A --- Added 8ml more of Sensi B --- Now base nutes are at 16ml for 4.5 gal of water. --- PPMs went up to 411. --- Still lower than 500 PPMs, but that's okay. --- PH was at 6. Not sure if I should adjust PH using AN nutes. So going to not ajdust unless PH goes above 6.1. Day 03 - Wednesday - 08/12/20 - Total Days: 010 ----------------------------------- - [0830]: Looks like more root growth! --- She still looks yellow. But leaves are perky. --- PH was at 6.2 so lowered down to 5.8. --- Solution strength was at 394 PPMs --- Since roots are still growing, I decide to lower the water level a bit. Now water level is a bit below the net pot. - [2200]: Root is getting longer! --- Slime is returning. Not sure why. --- Solution strength: 357 PPMs --- PH: 6.1 --- Decided to add an enzyme along with more beneficial bacteria to hopefully cure the slime. --- Added 16ml of Sensizym --- Added 5ml of Hydroguard --- Added 8ml of Voodoo Juice --- New solution strength: 430 PPMs --- New PH: 6.1 --- Top fed for a minute. --- This slimy residue is really freaking me out! I hope the added enzymes will help eliminate the slime. --- Going to do a full reservoir sterilization/nutrient change over the weekend. Please survive until then girl! Day 04 - Thursday - 08/13/20 - Total Days: 011 ----------------------------------- - [0930]: I think the enzymes worked! There is little to no slime now! --- Although I think the root was also dissolved in the process. It's now just a little stub sticking just below the net pot. The enzyme is also suppose to dissolved dead roots too but guess that root was too weak? Not sure what happened there. But I think the slime is cured! --- Solution strength went down to 395 PPMs. Decided to add more base nutrients. --- Added 8ml of Sensi A --- Added 8ml of Sensi B --- Added 4ml of B-52 --- Solution strength went up to 598 PPMs. --- PH was at 6.1 --- As long as the PH is between 5.5 and 6.3, I'm not going to use PH Up or Down. But still will monitor PH levels. - [1715]: Checked up on her after her nap and shes looking alive but stunted. But no slime! --- Decided to add some sugars to help maintain the enzymes and beneficial bacteria. --- Solution strength was at 587 PPMs. --- PH was at 6.2 --- Added 8ml of Bud Candy --- Solution strength went up to 671 PPMs. --- PH also went up to 6.3 --- Lowered water level a bit to hopefully promote more root growth. --- Top fed for a minute. --- She is getting bigger, but still looks yellow. Day 05 - Friday - 08/14/20 - Total Days: 012 ----------------------------------- - [0915]: Leaves look a little burnt on the tips. Still no slime. --- Going to back off on the PPMs to hopefully fix the nutrient toxicity. --- Solution strength was at 632 PPMs --- PH was at 6.3 --- Added/Removed water until PPMs were at 536. --- PH was still at 6.3 --- Raised water up a bit, then top fed for a minute. - [2200]: Looking better. Still yellow though. --- Solution strength: 514 PPMs --- PH: 6.5 --- Added PH down. --- New solution strength: 518 PPMs --- New PH: 5.2 --- PH was kind of high. So decided to PH down. Had to use quite a bit to bring it down. But eventually got it to drop down to 5.3. A little low, but so far, the PH has always gone up so wanted to start it really low. --- Ran the top feed for a minute to re-saturate the top of the hydroton. Day 06 - Saturday - 08/15/20 - Total Days: 013 ----------------------------------- - [0830]: She looks stunted. leaves are still yellow. --- Solution strength: 514 PPMs --- PH: 5.6 --- Top fed for a minute. --- Not sure what to do at this point. Going to do another reservoir change soon. Hoping she lives until then. - [2145]: Looking pretty much the same. --- A bit of slime has returned. Since I've been diluting the nutrient solution, the enzyme ratio has dropped. So I guess this is expected. --- Also noticed that slime build up was on the air-stones. Never really checked the stones so not sure how long that has been there. Looks brown too, which can't be good. --- Going to do an H202 sterilization of the system (minus the net pot) tomorrow so did not add anything. --- Lowered the water level to below the net pot. --- Then top fed for a minute. Day 07 - Sunday - 08/16/20 - Total Days: 014 ----------------------------------- - [0900]: STERILIZATION DAY! --- Decided to skip today's night cycle for a deep clean. --- I'm hoping that skipping a night cycle won't be too stressful. --- Temporarily moved her to a new bucket. --- Used about a half of gallon of straight distilled water to flush out the net pot. --- Drained the system and wiped up all the brown sludge. Also removed the air stones and cleaned up all the goo. --- Filled the system with 2 gallons of distilled water and at least 30ml of food grade hydrogen peroxide (35% strength). --- Yea its a lot, but since I'm not going to sterilize the system overnight, I went with a really high doseage. Basically I kept adding until I started to see little bubbles start to form. --- Then I ran the water pump. - [0915]: Boiled the air stones in tap water for about 10 min. Then reconnected them to the airlines. --- I let the air stones and hose soak in the sterilization solution for about 5 minutes so the peroxide can absorb into the stones. Then ran the air stone to help mix and agitate the solution. --- Occasionally, I'd repeat the process of turning the air pump off for a few minutes to let the stones soak. - [1000]: Covered the top two row of holes of the net pot with some aluminum tape. Hopefully this solves the light leaking in through the hydroton. - [1200]: Used an old toothbrush and scrubbed the pump clean. Then drained the system. --- Refilled with more distilled water and peroxide. Again added a lot. --- Ran system again to sterilize even more. - [1530]: Drained the system and refilled with distilled water to rinse. --- Ran the system for a few minutes, then drained and rinsed again. --- Did this a few more times over about an hour. - [1630]: Added 4 gallons of fresh distilled water. --- Added 15ml Sensi Grow A --- Added 15ml Sensi Grow B --- Added 12ml of B-52 --- Added 16ml of Voodoo Juice --- Added 16ml Sensizym --- Solution strength was at 430 PPMs --- PH was at 5.6 --- I was going to add Hydroguard, but I think the bottle is expired. Since 2017 or 2018!? I think Hydroguard is good for up to 2 years from the date on the bottle or 6 months after opening. So not going to use from now on. I wonder if this could have contributed to the slime build up. --- Also removed the CaliMagic and Superthrive too. Going to only use AN products to eliminate the chance of incompatible nutrients. --- Placed her back in the bucket and top fed for a minute. --- Here's hoping for the best. Going to let it ride until morning! Please feel better! [END OF WEEK 02]