Likes
Comments
Share
For LIQUIDS & Nutes ******GREEN BUZZ NUTRIENTS***** organic. Also i’m using their LIVING SOIL CULTURE in powder form! MARSHYDRO ⛺️ has large openings on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W 💨MARSHYDRO 6” in-line EXTRACTOR with speed-variation knob, comes complete with ducting and carbon filter.
Likes
39
Share
@Bluemels
Follow
Tag 105: Trotz heller Blätter wachsen die Blüten stetig.Noch 3 Wochen bis zur Ernte!
Likes
29
Share
These ladies were a treat to grow and even better to smoke, looking forward to my next run 👌🤙
Likes
13
Share
@Angry_Elf
Follow
What am explosive week!! Trio is looking great!! Increased ppms on two and lowered by 2% on the last girl as she is very sensitive. All three have had incredible root growth, ill take pictures next week. I added cal-Mag to their line up and increased the light intensity to 50% will stay here for the week and increase 5% each week. The pH has not been fluctuating like the last run, these girls like to stay around 5.8-6.5. The tent VPD (Vapor Pressure Deficit) has been holding stable in the green for the last 4 weeks, I am going to shift the environment over the next two weeks to the next stage of growth which is the late veg/ early flower.
Likes
102
Share
@Aleks555
Follow
Dear team TrolMaster Europe, We would like to express our sincere gratitude for providing us with the Tent-X controller. We are delighted with its functionality and performance! We are confident that this controller has significantly aided us in our journey with our beloved plant Jealousy from Zamnesia.💪🤝 We were pleasantly surprised by the efficiency and ease of use of the Tent-X. It seamlessly integrated into our plant care system and helped us achieve incredible results. Once again, thank you very much for your support and high-quality equipment. We are immensely satisfied with your product and hope for long-term cooperation in the future. Today marks the end of our journey with Jealousy from Zamnesia💚, and we want to express our heartfelt gratitude to Zamnesia for their support throughout this entire journey. We also want to extend our thanks to Plagron for providing us with their high-quality fertilizers. Their products are not only effective but also incredibly easy to use. We highly recommend them to everyone!
Likes
3
Share
@CalGonJim
Follow
4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3. 4/16 543am 5ft tent sideways attached to 6ft table that can slide around
Likes
3
Share
Girls are getting closer everyday cloudy on the inside looking for ambers before the are ready about 10 days to go to harvest
Likes
Comments
Share
@Drtomb
Follow
Im around day 26 of flower and now that the other side has been harvested the smells are sure sticking out from the lava cake. Smells a lot like someone has some cake in the oven. The flower pistols are really starting to stretch out and set the path for the bud to expand into
Likes
8
Share
@Lazuli
Follow
I had to hand water them this week to get the EC back in the right range
Likes
10
Share
Day 43 this orange is running absolutely faster than the last I did. Every day flowers are getting bigggers and resin is awful to be at 42 days. I’m really loving aptus product, but I really can’t ell what’s is pushing her so fast. Behind, in the video, you can see another auto is a strawberry banana and germinated with just 24 h difference but is starting just now to get into flowering, same soil ‘, same feeding.. incredible Let’s see what s happen
Likes
16
Share
@Tezza2
Follow
The gorilla glue auto is taking up most of the room in the tent if i didnt have the big purple lemonade auto in there the gorilla glue would take up most of the tent its flowering hard it has alot of tops and lots of bud sites and the purple lemonade auto is flowering nicely i believe it is coming into the fourth week of flower for the purple lemonade auto i had a small sample of the purple lemonade when i trimmed up the bottom half of the plant all the small buds that came off i dried out i smoked the buds and man O man it smashed me hard i had one joint and it made me pass out i cant wait for it to be ready for harvest
Likes
8
Share
Week 14 (09/06 - 15/06) 12/06 She looking like fox-tailing a bit 15/06 Last day of the week, she is smelling good, got strong lemon/berry smell after defoliating her a bit
Likes
12
Share
29/6 sorry for the absence, the plant has continued to strech, I added as integrazone the regulator because of the heat, in general the plant seems to be very good 2/7 I did some defoliation. tomorrow I lower the lamp to 30/40 cm temperatures allowing
Likes
1
Share
flowering has takin off quite well i had to wait some time before i could re emend the soil due to not having any. Now that i do have some there should be some major growth with the coming weeks, I Topped with worm castings and Gaia Greens Power Bloom Dry amendments! Watering When dry Method Aswell i dont think i mentioned this!
Likes
28
Share
Start of week 4 of flower! Off to a troubling start, as the light switched on over 1 hour ealiere than scheduled. I took a spare timer, and set it up to continue it's 12/12 schedule, but now moved one hour back. I cross my fingers they forgive me for this error.🙏 👽👉31/10 The day after watering and the day my timer messed up my 12/12 schedule. But hope it brings no problems. I defoliated lightly and only removed most under the SCROG line. Even a couple of underdevoloped branches that stretched below SCROG-net got cut. 👽👉 1/11 Been having a battle with humidity after watering, but upped my air circulation to help. 👽👉 2/11 Waterday* Upped my nutes on BioHeaven, BioGrow and BioBloom. 👽👉 3/11 They seem to be responding good to the upped nutrients. 👽👉 4/11 Humidity under control. 👽👉 5/11 The VPD on point, has really speed up the trichome production. 👽👉 6/11 Waterday* Stayed on the same schedule, as last watering. They seem very satisfied and no signs of mistreatment.
Likes
34
Share
This strain is going to give a lot of big buds, its developing very well. It smells like sweet sour mango.