She’s been flowering for 4 maybe 5 weeks now initially I thought she was taking long because my 12/12 was a couple mins off giving it more light but corrected that n it just looks like it’ll be a long finish her but it’ll be worth it 😎

Comienza la floración de estas pequeñas!! Cambiamos línea de fertilizantes gracias a b.a.c 👍👨‍🌾🏻🍀

Last two plants are flushing now. My stunted mango smile yielded about 36 g which I made about 7g of rosin from and kept a few nugs. My first sour crinkle yielded about 55g. They seem like they will yield much more. Seems like if you want smaller faster plants use airpots or bigger plants w a longer lifecycle do fabric pots.

day 70 was harvest day !! really fast strain, 24h light ON really played a big role as well frosty buds and amazing strawberry smell, now lets dry it !!

Day 8. Girls are happy, nothing to add, let's see flowers !!! ;)) Pain to wait ... Found some bugs on those plants aswel, will apply neem oil therapy in a minute. Day 10. Yesterday soaked in soap and neem oil main tent, today was dry room day ... I hate applying any soap for living soil, its a big disaster if loads of spray will get into pot, plus changes of ph. I can only hope for best, but first valuation after 4 hours shows no visible bugs, sticky traps installed, they should and have to make it !!!! ;))))) No flowers yet, just pre starts to form, so neem should not get into bud and destroy taste ... Fingers crossed ... Girls got theirs name by size, so Tallest, Smallest and Standard ;))) Think to raise Smallest pot in a week, she is a bit too far, hard to find good lamp distance for all three ... Happy Growing !

Hello dear growers! The Critical+ one is on the Ripen from the middle of this week, 5ml/l has been used. So i am about to feed her with Ripen tea one more week, then water and. finally harvest time 💪 As about California Hash Plant, will be used the same but with an extra week of flowering on GHE nutrients 😋 Keep going! Peace!

Fastbuds Week 4 Gorilla Cookies Auto The 2 of these are growing amazing. One definitely bigger than the other but I believe the little one will catch up before to long. Been giving them straight water up to this point so About week 4 of Veg I like to give them a good molasses tea. It just gives them a nice boost into veg to flower transition from ny experience. Until next week Happy Growing

Welcome to Flower week 8 of Fast Buds LemonPaya I'm excited to share my grow journey with you from my FastBuds Project . It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this Project , I’ve chosen the Feminized Photo strain Lemonpaya : Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Fast buds • 💧 Humidity Range: 35 • ⏳ Flowering Time: 58 Days • Strain Info: 30%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 16l • Nutrient Brand: Narcos • ⚡ Lights : 600W x 2 A huge thank you to Fast Buds for allowing me to try my Best with this amazing collection from Automatic and Photo Strains they managed to Sponsore . Big thanks for supporting the grower community worldwide! Your genetics and passion speak for themselves! I would truly appreciate every bit of feedback, help, questions, or discussions – and of course, your likes and interactions mean the world to me as I try to stand out in this exciting competition! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!

Germinating 3 Purple Kush Feminised seeds. filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. This results in increased germination speed Hopefully all 3 seeds will germinate by tomorrow? Seeds popped today:-)transferred 3 Purple Kush seeds in to small pots 10/09/23 3 Purple Kush seeds, 1 seed in each small pot. Each Pot is Half filled with lite mix compost and Half filled with Vermiculite , watered planting medium before sowing seeds 2cm deep in planting medium. The seed will push through the vermiculite easley with very little effort, in effect increasing higher successful germination rate, the compost will offer the first tap root an immediate lite nutrient supply. Placed 3 pots on top of a Propagation heating mat for correct germination temperature, position in a shaded place, and keep out of direct sunlight. This may seem like a lot of effort? and it is, but it will be highly beneficial by increasing a higher germination rate and higher amount of seeds will germinate from using this method :-) especially if your seeds were expensive. 11/09/23 no sprouts above the vermiculite yet, i will check it again tomorrow. Today 2 Purple Kush Germinate and rise above the vermiculite 3 days after sowing. Purple Kush is going ok, it could be growing faster, unfortunately i can't upload new photos because there is a problem in the GD system, they are doing there best to fix this problem as soon as possible. GMO Cookies where started 16/09/23 filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. 3 seeds sprouted, but only 2 survived, it become to hot and one GMO Cookie sprout died. I have now started another strain (Party Monster) 19/09/23 filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours, 5 seeds of Party Monster have sprouted and are under the same 100W LED grow light. GMO Cookies have all come up above the vermiculite and are now positioned under a 100W LED, there is a small clip on fan blowing and circulating the air. This is my second attempt to grow GMO Cookies from 3 feminised seeds, i messed up on the first 3 seeds, i put them under a 250 Watt LED and it fried them, my folt. Growing from germinating seeds is a very delicate situation, your environment temperature needs good control. 2 Party Monster seedlings are looking good, coming along well under the 100W LED light. 3 GMO Cookies are looking good also under the 100W LED light. Plus i have now started soaking in glass of water 03/10/23, 5 Strawberry Yields fem seeds aka Strawberry Fields. filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours. The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. This results in increased germination speed Hopefully all 5 seeds will germinate by tomorrow? The 3 GMO Cookies fem seedlings are coming along well, keeping them under the hood of a propagator, i have many mixed seedlings under the same hood, to keep seedlings protected from this relentless Spanish heat. 5 Strawberry Yields fem seeds have all sprouted and are above vermiculite, keeping them under the hood of a propagator, i have many mixed seedlings under the same hood, to keep seedlings protected from this relentless Spanish heat. Also positioned also under the 100W LED light, indoor temp 29 degrees humidity 65%, still to hot for seedlings to be directly under lights due to high temp in the room. 3 Strawberry Yields sprouts are doing well, gave 2 seedlings away, no space for all 5 plants, coming along well under the 100W LED light. 27 degrees humidity 55% good growing conditions Super Lemon Haze I began soaking 13 feminised seeds SLH since 27/10, after 24 hours soaking 11 seeds opened in filtered water in glass, also added 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. This results in increased germination speed! 1 Super Lemon Haze fem seed planted in a 2 ltr pot 28/10, this is the only plant i will keep for flowering. The Pot is Half filled with lite mix compost, and the rest of the pot is half filled to the top with Vermiculite , watered planting medium thoroughly soaking it before sowing seeds 2cm deep in vermiculite. The seed will push through the vermiculite easley with very little effort, in effect encouraging a higher successful germination rate, the compost will offer the first tap root an immediate lite nutrient supply. And i planted the 11 remaining popped SLH seeds in the brown round pot, this is just to see how many will rise above the vermiculite from the 13 SLH fems seeds soaked on 27/10. I will give these away to a friend. Both pots have been placed on a propagating heating mat for consistent and ideal germination temperature until all seeds have risen above the vermiculite. Once my 1 fem seed has germinated! i will cover the pot with a transparen plastic bag and place the pot 20cm below a 100W LED light. Super Lemon Haze feminised seeds Seeds sourced from Satdica Bulk Seeds Soaked seeds 27/10 planted up on 28/10, 12 out of 13 seeds have transformed in to 12 healthy little seedlings. 11 seedlings will be given away to a friend, and i will keep the one seedling you see already planted up in a black 2 ltr size pot. Now positioned under my 100W LED light, distance 15cm above seedlings. Light cycle 24 hours. Keeping them covered with propagating hood for a few days longer to allow seedlings to become better established before removing the hood. The vents on hood are fully open to allow seedling to slowly become accustomed to the outside vege room space. Gelato Cookies 3 Feminised seeds Satdica Bulk Seeds Popped 3 Gelato Cookies Feminised seeds today 06/11 filtered water or bottled water in a glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. After placing on propagating heating mat for 24 hours. This resulted in increased germination speed! and today i can see little white taproot tails protruding out from the seed husk 👌 3 Gelato Cookies seeds, 1 seed in each small pot. Each Pot is Half filled with lite mix compost and Half filled with Vermiculite , watered planting medium before sowing seeds 2cm deep in planting medium. Spoon your seeds into it's planting medium, do not touch with fingers, spoon it in with half spoon of water and a seed, place the seed in the center 2cm deep in the planting medium, water it in again very lightly to help the seed settle into a comfortable position before leaving it to rest covered on your heating mat. The seed will push through the vermiculite easley with very little effort, in effect increasing higher successful germination rate, the compost will offer the first tap root an immediate lite nutrient supply. Watered and fed them in with Plagron Terra Grow 5ml to a ltr of water, i may have added too much, perhaps 2/3ml to a ltr of water would have been enough? placed 3 pots on top of a Propagation heating mat for correct germination temperature, position in a shaded place, and keep out of direct sunlight. This may seem like a lot of effort? and it is, but it will be highly beneficial by increasing a higher germination rate and higher amount of seeds will germinate from using this method :) especially if your seeds were expensive. 3 Gelato Cookies have come through the vermiculite, 09/11 and now they are positioned under my 100W LED grow light. I didn't expect all 3 seeds to pop, because 1 seed looked like perhaps not viable, because i only keep the bad looking seeds for myself and keep the best seeds for customers. I am keeping them covered with transparent plastic bags for a few days to protect them in case it's to hot in the 24/7 grow room which is 24 degrees, this is probably an ok temp for them? but i'd rather not run the risk. Romulan Feminised seeds Germinating 3 Romulan Feminised seeds 26/11 filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. This results in increased germination speed Hopefully all 3 seeds will germinate by tomorrow? 27/11

420Fastbuds-Week 10 StrawberryGorillaAuto What up grow fam weekly update for these three stinky girls. Did a defoliation taking off almost all the fan leafs and let them swell up and rippen before giving them the chop this week. Seeing 70/30 clear to amber trichs. They smell super super pungent and sticky as all get out. Excited to get the trimmed,hung to dry and start this curing process. All in all Happy Growing

🍊🏵️ Red Mandarine x9 SoG X ViparSpectra XS1000🍊🏵️ 🏵️8.6 ... 🏵️9.6 Last day before harvest, yeah !!!!! It is really gorgeous !!! 🏵️10.6 ... 🏵️11.6 ... 🏵️12.6 ... 🏵️13.6 ... 🏵️14.6 Latest photos of the plants still in pots, they are already hanging ready to be cleaned _________________________________________________________________________________________ ❓ Are you new to the world of the cultivation and don't know where to safely buy your seeds? 😮From SweetSeeds you can find award-winning, sweet, fast, fragrant, beautiful, and delicious genetics !!! ✅http: //bit.ly/SweetSeeds_ ______________________________________________ 👀 Are you looking for a good lamp to start with? 👀 🌞Viparspectra has something more than the others, take a look at their site. ⏩ Use "GDVIP" for an extra discount or "ViparDreamIT" for an extra 5 %% discount 👀 Search for it on Amazon ✅Amazon US: https://amzn.to/30xSTVq ✅Amazon Canada: https://amzn.to/38udUVe ✅Viparspectra UE: bit.ly/ViparspectraUE 👀 Watch my ViparSpectra XS1000 unboxing on YouTube, leave a like and write to the channel 🦄 ✅http://bit.ly/UnboxingViparSpectraDreamIT ______________________________________________ 📷🥇 Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ 🔻🔻Leave a comment with your opinion if you pass by here🔻🔻 🤟🦄💚 Thank you and enjoy the growth 💚🦄🤟

The sizes... the sizes was really really small due the hot weather as it was a outdoor grow. (I have a video holding the bottom of my bonsai hahah)

Alles super mein Training diese Woche war hart deswegen ist sie langsamer gewachsen dafür brauchte sie 2-3 Tage Regeneration ich hab sie mal verglichen Mit ein paar anderen aus dieser grow Community ich bin sehr beeindruckt von Euren aufzuchten aber ich muss sagen ich bin irgendwie paar Tage voraus trotz hartem Training Also wenn ihr Lust und Zeit habt vergleicht einfach mal selbst und Bildet Eure eigene Meinung sagt mir Was ihr denkt positiv wie auch negativ im Fine With that thx already and stay save and high!!!!!me stay save high!!!!enjoy life 💯💯

Left alone for a week in autopot. Lack of nutrients :(

Buona da consumare

Ghost Train Haze · Week 12 From Seed Catching The Ghost Train Haze @ Zamnesia 👻 Week 12 from seed, and this one is still all momentum. While the room as a whole is beginning to slow, this plant still carries forward motion — not in stretch, not in structure, but in sheer flower mass. The frame is already built. The architecture is done. What remains now is density, resin, and finish. And in true Ghost Train fashion, she is doing all of it at full scale. This is not a subtle plant. Not in height. Not in width. Not in flower. Not in presence. She has become one of those plants that changes the feel of the room just by standing in it. ⸻ From Seed to Here From the beginning, this one showed a very different kind of energy. Where some plants stayed compact and conservative, Ghost Train Haze never really asked for permission. She moved with intent early, built fast, stacked hard, and never gave much reason to doubt what she wanted to become. This was never a small-frame cultivar. Even early on, the message was clear: longer frame, stronger reach, larger vertical push, heavier terminal expression. She wanted space. She wanted support. She wanted structure. And she got all three. LST helped guide the shape, but the real work here was not controlling her — it was supporting her. Because once she committed to flower, this became less about training and more about load management. That is where we are now. The structure is built. The weight is here. And now the room is no longer shaping her. It is holding her up. ⸻ Week 12 — Same Room, Same Rules Even an outlier still finishes inside the ecosystem. And that matters here. Ghost Train may still have more runway left than some of the others in the room, but she does not flower in isolation. She flowers inside a shared environment, shared rhythm, and shared finish window. That means she moves with the room. So while she may still have another two weeks — maybe three — of true finish left in her, she is now on the same simplified path as the rest of the garden: less input, less push, less bottle, more observation. Which means this week she also moves into water-only irrigation with Pure Zym staying in rotation. Not because she is finished. Because the room is. And now we get to watch how far the biology carries her from here. ⸻ Why Pure Zym Still Stays This is where late flower becomes more interesting than people think. Yes, the nutrient stack is stripped back. Yes, the EC is down. Yes, the pH has drifted higher and we are no longer forcing correction. That is not neglect. That is transition. At this stage, we are no longer trying to push aggressive uptake through bottled input. We are leaning on what the medium still holds and what the biology is still able to process. And in a living medium, that matters. Pure Zym stays because even when the feed is reduced, the soil is still active. Root turnover is still happening. Organic matter is still breaking down. Microbial life is still cycling what remains in the pot. The plant may be receiving less from the bottle, but it is not receiving nothing. It is still being fed by the medium. Still being supported by microbial activity. Still pulling from what is already present. And for a plant this large, late-flower access matters more than late-flower force. We are not trying to make her bigger now. We are trying to help her finish clean. ⸻ The Plant Right Now Massive. That is the only honest place to begin. This is one of those plants that stops looking like a “large auto” and starts looking like a full structural problem. The main cola is no longer just oversized. It is arm-thick. Baseball-bat territory. A true terminal flower with enough mass that support is no longer optional. And the support tells the story as clearly as the flowers do. This is not one yo-yo on one top. This is multiple yo-yos across the plant because this is no longer about holding a cola upright — it is about distributing load across a living structure carrying more than it was ever meant to hold alone. That is always a good sign. When support becomes structural, the plant has done its job. And she has. Top to bottom, this plant is carrying serious weight. The primary colas are dense, heavy, and fully formed. The secondary sites are not filler. Even the lower flowers — the ones that often end up loose, airy, or forgettable on lesser runs — are dense, firm, and fully worth keeping. No fluff. No waste. No real popcorn to speak of. Just smaller flowers with the same intent. That is the mark of a properly loaded plant. ⸻ Resin, Density & Finish And now she is frosting properly. The structure was always there. Now the resin is catching up to the weight. Trichome production is climbing harder this week, and it shows across the full flower surface — not just on sugar leaf edges, but across the bracts themselves, where it matters most. The frost is no longer isolated. It is spreading. And that changes the whole look of the plant. The flowers are tightening. The resin is thickening. The surfaces are becoming brighter, stickier, and more defined. And underneath that frost is the part that matters most: density. This plant is not just large. She is solid. Not visually dense. Physically dense. Firm flowers. Hard lowers. Heavy tops. No softness anywhere. That is the kind of late flower you want to see. ⸻ Conditions & Late Flower Response Room conditions remain stable and in line with the rest of the garden. Temperature remains unchanged from the previous week. Humidity remains steady. The environment stays consistent because the room is still reading correctly at leaf level. What has changed is the input. EC is down. The feed is simplified. The pH has drifted higher and is no longer being forced into correction. And that is fine. At this stage, the room is no longer being steered through numbers alone. It is being steered through response. Leaf posture. Water demand. Flower tension. Resin development. Overall plant rhythm. And the response remains strong. So the room stays steady. ⸻ What to Expect Next Now we watch how far she wants to carry herself. Over the next stretch, expect: * continued resin push * stronger aroma development * slower but heavier calyx swelling * more visible trichome maturity * reduced water demand * increased support demand * deeper finish expression across the flower surface What not to expect: * much more stretch * explosive new vertical growth * dramatic structural change * a fast finish just because the room is slowing She may still have another week. She may still have three. That depends entirely on how well the root zone and stored energy carry her through the final phase. And that is exactly what makes this stage worth watching. Now we find out how much of the finish was in the bottle — and how much was already in the plant. ⸻ Gratitude A plant like this is never the work of one hand alone. Respect to Zamnesia for the genetics. Respect to Plagron for supporting the root zone to the finish. Respect to the LEDs for driving the room start to end. Respect to the gear holding the weight when the branches no longer can. Respect to the platform for letting growers document the process honestly. Respect to everyone following, supporting, questioning, learning, sharing, and watching. To the day ones. To the growers. To the curious. To the skeptics. To the old heads. To the new eyes. To the ones here for the data. To the ones here for the beauty. To the ones still learning how to read a plant. And to the ones who already can. Grow with love. 📡 DELETED @ 1K Please stay tuned.we never quit https://www.youtube.com/@TheDogDoctorOfficial NEW 🙏 Thank you for your patience and continued support. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it. GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial Instagram: https://www.instagram.com/dogdoctorofficial/ YouTube: https://www.youtube.com/@dogdoctorofficial Deleted by Youtube - https://www.youtube.com/@TheDogDoctorOfficial NEW Vimeo : https://vimeo.com/dogdoctorofficial Under construction stay tuned ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: 🔆 Lighting & Environmental Control • Future of Grow — Advanced LED lighting technology https://www.futureofgrow.com/ DISCOUNT CODE: DOG20 • Lumiflora — Under-canopy LED lighting https://lumiflorade.com/ • TrollMaster — Environmental controllers and automation gear (past collaboration) ⸻ Genetics • Zamnesia Seeds — Genetics used in this project https://www.zamnesia.com/ ⸻ 🌱 Soil, Substrates, Boosters & Root Support • Plagron — Substrates, bio mixes, and supportive products https://plagron.com/en/ ⸻ 🎒 Storage, Curing & Preservation • Grove Bags — Curing and storage solutions https://grovebags.com/ ⸻ 📸 Photography Equipment & Tools (Not sponsors, but part of my creative toolkit) • Sony A6700 • Sony full-frame macro lens + few more • Stacking photography workflow - learning • iPhone (for behind-the-scenes shots) We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚 📸 P.S. – The Eye Behind the Lens All photos in this diary (for now — except for the ones showing the camera, which I took with an iPhone) are taken with a Sony A6700 paired with a Sony full-frame macro lens and a few more. Photography is part of the story — it’s how we share the fine textures, the glow, and the quiet details that words can’t always capture. I’ve also started experimenting with photo stacking — a technique where multiple images, each taken at a slightly different focus point, are layered together to create one perfectly sharp image from front to back. It’s not digital enhancement or AI; it’s pure photography — a way to reveal the plant’s beauty in microscopic depth, from trichome to petal. You’ll even see a few shots of "ghost me" capturing the shots — camera, lens, setup — because every grow deserves not just to be cultivated, but documented like art. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial NEW DISCORD - Official Server Invite Link : https://discord.gg/ksjAkA5T74

Outdoor are starting to show sex; Indoor starting flower

_____________________ | ROYAL CHEESE HARVEST | |_____________________| Whats up!! Harvesting a little earlier than when i would like, because of the rise of bugs that appeared last days due to climate conditions... this year temperatures are oscillating more than usual having 1 rainy week, then a sunny hot one just after it rains.. In fact, last year, it did not rain until November So the plagues were on the leaves, mildew powdery(just a coulpe of leaves),aphids(like just in the leaves of one cola), and some caterpillars almost ready to get out and start eating all the buds, (hopefully i cut that day).. Sounds bad, but the parts of the plant affected was only the leaves... and means that a proper cleaning is coming so removed all the leaves and the result is what you can see, that bonsai.. Spotted 2 dead material points in big colas, that i removed after drying.. I did not weight the plant wet because of the smell that i had on my house that day, things went very tense, i was a bit busy, and even, it has not much sense to me, im better weighting the dry material. So at the end i think im having very good quality, and the affected parts are less than i thouth at first, so im very happy with the results.. On the scales are the best buds, the rest is the lower part of the colas that were less developed so im doing hash with that part.. Been busy guys so im uploading more photos today ^^ I hope you like all the grow thank you for follow it :) Song: Eazy-E - Down 2 tha last roach00000