Great flowers with beautiful colors! Smells of sweet oranges and grapefruit sour grape woody spicy chem aromas and tastes of earthy sweetness with a hint of citrus.

Videos were taken on day 37 of flower. This one has a heavy strawberry aroma and some strange lookin buds. Looks like it will fill in pretty good. It's on the far right of the tent in the videos next to the purple leafed plant.

Muy contento con el resultado de esta hermosa genética llena de resina , un olor muy rico, agradable al fumar y muy potente, cumple con creces mis expectativas 👍👨‍🌾🏻🍀

A it late with the update as I broke my phone,. To say it was my 1st harvest was very pleased with the outcome, 38grams dry of mostly tight nugs, trichomes on the main colas were turning Amber so cut those down couple of days earlier and left lower nugs to develop a bit more. Cured for 2 weeks now and buds smelling and smoking great, smooth taste and full of flavour! Next crop been planted very soon.

So I had a little less nutrient last week then i needed. Def a calcium deficiency. I think it's clearing up but this plant has spot all over it. I changed the water, gave it the right amount of nutrients and a little exra hydrated lime for calcium. Hydro is hard. I hoping It's not sick. I hope It doesn't get the other plants sick. Just a few weeks left.

Flush week! It has not been 7 days since my last update. But I wanted to share these photos with everyone that won't see them. haha Soo I will be harvesting with my new machine! Will past about that in my harvest update

Holky tloustnou budu muset dát sit😉

Start of the thrid week today. I was behind on my dairy the first two weeks so there may some date differences in weeks 1+2 Gorrila zkittlez - doing great so far getting nice and bushy. Doing LST on the three off the every 3rd day and that's about it. Psychosis - she has still been growing and new stems appear evey few days. Two of the leaves had yellowing in them for 2 week so I've put in down to the lack of cal/mag in the system. Today I was going to replace the nutrient water but instead I decided to leave it and and cal/mag to the res. The reason for not changing water is down to the volume I am using. I have a 225L tank, 6 20L pots with a 20L brain unit. So I'm roughly using 300/310L if I'm at full capacity (365-15%) due to me obv not using the full capacity of the red or bucket for many reasons. I only need 50/100 litres at this stage per week so instead of changing it every 7/10 days. I have filled the system with more than enough supply as to not need to change it so frequently. Ps. The nuits/ec/ph have been holding steady for weeks now hence another reason for keep the water res from week 1 I will be changing the nuit strength and water at some point soon of course... Maybe give it another 7 day depending on how the plants are doing 🤙👍

Empezamos la semana cambiando los nutrientes al observar ya unos pequeños pistilos o estigmas , en definitiva, empezaron a mostrar tímidamente el sexo. Empiezo con poco y iré subiendo la dosis hasta 4ml/L hasta que vuelva a cambiar de nutrientes. Creo observar del Lumatek ATSpro que le fataria un punto de luz en el centro del panel. Por lo general con otras luminarias la planta del medio me solia crecer mucho mejor y esta vez está quedando retrasada. Seguiré cultivando y si me sigue pasando lo mismo entonces no tendré ninguna duda, por ahora solo son conjeturas, xd De lo anterior rectifico , tengo que decir que pasados dos dias lo estoy viendo diferente, la del medio parece que sigue por buen camino, ahora apenas notaria la diferencia. La semana anterior, la sexta, se les hizo una segunda pulverización con dosis alta de 3ml/L con spiderbloom ( "fitofortificante de impacto muy rápido") pero de nada sirvió, durante esta semana subió la temperatura a 30ºC un par de dias y las arañas salieron a pegarse el gran festín. Una vez constatada la existencia de araña roja correteando por el envés de las hojas solo toca desinfectar bién el armario, lavarlas a todas una a una con agua corriente para arrastrar el máximo de arañitas y una vez secas darles con algun acaricida químico. De no hacerlo ahora me seria imposible más adelante y no tengo ningunas ganas de dejar perder este cultivo. No soy partidario de lo químico pero menos de dejarlas perder.

Ever since I started adding nutrients my main flowering plant looks like it’s stressed out. Maybe even slowing of some growth. The one that just started flowering seems to be unbothered. Continuing to try to follow instructions as best as I can but of coarse I can do stupid things like after I feed I once used water without ph correcting it 😒. All good though gotta learn somehow. This strain keeps growing regardless. Might just not hit its maximum potential due to lack of professional know how.

So this was one of the easiest autos I have grown she’s short and fat has an amazing smell and coverd in trichomes I can’t wait to try it!!!

Starting out strong!

Its the beginning of the week, all of them showing white hairs and began to flower. Hope they will stretch a bit more, one of them is super healthy , one is showing deficiency but i really cant tell of what, another one that grew very small compared to her sisters and just began to explode. For now i keep water every two days and spray the soil every few hours. 3 lt of tap water mixed with microdosing of bio grow,bloom,top max. 1ml/4lt each. And slowly increase as needed. Lst and a little bit of defoliation. Very busy plant. Needs some defoliation and crying for low stress training. Im in love with this one.

Not a lot happened last week, just monitoring, feeding, and keeping everything in check while the girls did their thing. I did switch over to my finishing nutrients and have cut out calmag according to feeding chart I have been following. I think we are gettting pretty close to harvest though! The trichomes are starting to get a little milky. I am going to wait until about 30% amber to harvest though. I am getting super excited to finish this one and start my next run! 9/2 - The girls have been doing great and are starting to pack on the size and frost nicely! Nothing to do to them really except monitor and keep checking and making sure everything is running at an optimal level. The closer it gets I start to get a little nervous for the dry. I am prepared and have a plan, just hopefully I can get my dry set up as dialed in as I was able to get my grow tent. I will try to post more updates this week. Last week I had company from out of town, so it was difficult to get around to it. 9/5- Just continuing to monitor and check the trichomes, once about 25-30% turn amber I will be harvesting! They are starting to get pretty cloudy right now. When I did the res change yesterday, I switched to just root drip and full tilt and have started flushing, hopefully not too early, but im following my feeding chart. As always tips and recommendations always welcomed and appreciated! Thanks for checking out my diary!

Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.

Anubis is Good and healty, it is developing very well. Now is time to feed her a lot so she will develops a lot of big buds :P This strain seems very strong!

It still looks like there humming along gonna give one more week of veg after transplanting them so the roots can settle in. I don't want to stress them with to much after repotting them as the roots were air pruning though the 3 gal pots. My freaking camera stopped taking pictures at day 4 of week 4 not sure why, then today the power went out in my neighborhood it happened around the dark cycle so I hope with that and the transplanting it would not stress them to much. Another VEG feeding this week with extra (N) I hope the pale ones benefit from that. I diluted the food per the advice of you all to 500 ppm @ 6.0 ph will see how it goes this week I will post more at the end of the week as always. Thanks Drewbie

.

Der Stretch ist vermutlich abgeschlossen und die ersten Zuckerblätter mit schönen kristallinen Trichomen sind sichtbar. Sie entwickelt sich prächtig.💚 Absolut auf die nächsten Wochen gespannt!