Recovered from the topping and defoliation well. Responding to bondage well. Began Biobizz nute feed at half strength. Just letting her do her thing and flower when she is ready.

I will be chopping the blueberry og. So Removed BBxOG from the scrog two days into this week. Was a lot of work and accidental chopped off a giant top. Oh well. Will try to get drying space tonight

Loved growing. Definitely one of the best buds i have smoked. Trimming was enjoyable.

Flowering is starting well, starting to see trichs so I’ve gave them their first feed with bloom nutes (C4) which is also 95% organic which is always a bonus imo and I’ve not grown anything using organic products so I’m anticipating to see the end results. Their all 3ft tall or just under which is abit taller than usual but overall we’re looking fine, did some minor defoliation and lollipoping on the bottoms 1/4 of all 3.

- Day 22 Some new nodes are developing at the ends of each branches. Decided to defoliate some of the big fan leaves as it was starting to get way too bushy and smushed on to each other. Now it's a bit easier to put in some extra LST stakes and get direct light on all those nodes. I'm expecting the preflower stretch to happen at any time now so trying to get the LST optimal right now. Day 23 Watering day for her! Gave her 1.1L's of water (6.4 ph) with root-juice. bio-grow, bio-bloom, bio-heaven & alg-a-mic. Day 24 I placed the last LST stakes today, and will now let the stretch do it' thing with minimal corrections! Day 25 She recovered very nicely from the LST yesterday and I can definitely tell the stretch has begun now with how much longer some of the branches got. Day 26 Letting the stretch do it's thing and increased PPFD to 700. The first pistils on the flowering sites are really starting to show now. Day 27 Might've been a bad too late with the watering, pot was really dry but the leaves still looked good. Gave her 1.5L (6.4ph) containing silica force, cal-mag, bio-grow, bio-bloom, top-max, bio-heaven & acti-vera.

chopped her after two months of flowering hopefully she will dry mold free fingers crossed

okay guys this is insane.....232 grams wet... with a final dry weight of 17 grams..... im devastated.... although they are dense buds with such wonderful colour and smell, the yield and time was not worth it.... i gave it same treatment as the other ladies in the tent and they all BY FAR exceeded this. STRAWBERRY NUGGETS has a great berry flavour and honestly you can taste it a bit when you exhale and keep in mind this is not cured fully yet. every day it smells better and better. i am super disappointed with the yield, i was really excited for this considering it was my first prize ever! i do love the smoke but i will for sure never grow this again i was super disappointed...... there was 32 grams of HUGE stems lol after trimming i had 73.6 grams wet. total dry was 17 grams...... not even an ounce folks..... i will be making bubble hash, rosin and edibles with this! STAY TUNED!!!!!!! LOVE YOU ALL THANK YOU FOR LOOKING

The Banana Purple Punch is stacking very nicely now, with buds swelling visibly across the entire canopy. A sweet, fruity aroma is starting to develop, becoming more noticeable day by day. The plant has stayed very compact at around 50 cm, with a dense and well-structured canopy. There are an impressive number of heavy, well-developed bud sites, and overall development looks very promising at this stage.

Die letzten Tage... Für die 3 geht es nun deutlich Richtung Ende. Trichome sind alle Trüb und vereinzelt sind schon Ember zu sehen (vor allem bei der mittleren). Denke mal bis Ende nächster Woche sind sie dann soweit. 🥀 Geruch ist bei 2 identisch (mitte/rechts). Die linke ist etwas süßer/Cremiger ist als die andren beiden und riecht eher nach Mandarine/Orange. Ansonsten süß/cremig mit etwas Gas und etwas säuerlich mit leichten Zitrusnoten😜😍😍😍 Tag54 Heute wurde der AutoPot abgestellt und Samstag ist es dann soweit

Yo guys, End of a stressful week lol So cherry cola is looking nice purple and frosty. Smoothe is getting frosty and putting on weight. Orange sherberts are big plants as is the amnesia zkittles so there deffo going to take longer. There's a couple of nute burnt plants but nothing major only tips. Every plant acts diffrent so no Biggie, thats the joy of autos. Added cal mag this week go some colour back in the leafs. I woulnt recommend running 4x diffrent strains at once lol not if you want them all to finish at the same time and don't want to make diffrent feeds up.

The purple Lemonade despite a very beautiful structure is a little worrying us because the flowers are swelling very slowly. We are afraid that they will remain small but it seems they are getting bigger so we wait a little longer to express ourselves even if the painta seems in excellent salu...

we will carry out this cultivation under the sponsorship of Mars Hydro with an FC-E 4800 lamp , to view this lamp or any other marshydro product go to: https://instagram.com/marshydro_aliexpress?igshid=YmMyMTA2M2Y=

I noticed that the drainage EC exceeded 2.6. I'll have to correct that. 🙊

We have 2 weeks under our belt and now we're charging into week. So far each day I can see more new growth which is encouraging. With a few more nodes in the next day or so I'll look at topping. Cheers til next time -Dj Sunstone

Talvez tenha desfolhado demais, espero que engordem nas próximas semanas.

Happy times have arrived as nearly harvest time currently in flush mode for another week and yeah hard rock buds very frosty

IF YOU WATCH THE VIDEO YOU CAN SEE THAT I MOVED THE LAST AUTOFLOWERS INTO THIS 5X5 TENT, AND MOVED THE PHOTOPERIODS INTO THE 8X8 TENT. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

2 días entre servilletas y al sustrato. Aprox 12 hrs en obscuridad y se comienza el ciclo lumínico 👌👊👨‍🌾🏻