Não coloquei muitos nutriente essa semana, está linda e resinando muito, as vezes deixo no sol por umas 2/3 horas

The plants are doing really well ✌️ Last week it looked like the buds growth was slowing down, but this week the buds are growing in size by the day. The strain description says the plant should be ready in 9 weeks, but as things look now it could also be 10 weeks. I don't mind though as she already looks amazing and getting better every day! The plant in the back that didn't have the purple shades is now also turning purple-ish. The resin production on both plants is more than I ever seen in previous grows. The buds and sugarleafs are sparkling every time I open the growbox, and the smell is really intense. My carbon filter is having a hard time keeping the aroma inside the GTools these last few weeks 😅 Will the Fruity Donutz will be ready by the end of the week? Stay tuned for more pictures and updates 😊😉 A final update before the plants are harvested ✌️ It's officially week 10 now, but I plan to harvest the Fruity Donutz in a day or 2. The trichomes are mostly milky but no amber ones just yet. It would be a shame to harvest these beauties before they reach their max potential. They look absolutely stunning, and I can't wait to try them. I plan to chop them down and hang them without doing any trimming, just remove the biggest leafs. They take longer to dry, but it does improve the overall taste and quality in my experience.

Harvest was easy pulled all fan leafs off five days ago but left bud leafs on top to help drying process and it makes trimming easier as you can see I trim plant as it stands then I cut branches off or the whole plant. Only took 1hr to harvest.

Grosse défoliation , elles ont bien repris ! Content , sa prend pas mal de place !!

Finally those will become mother plants as well since some friends asked me for clones so i will keep up the diaries but i won't switch these ones into flowering yet. I'm planning to start my clones at the end of this month. I will be doing a main-lining with 15x15 rock wool and FloraFlex stuff 😎

6 weeks in veg from seedling

Hey everyone :-) This week it smells more and more sweet and fruity in the whole room 😍. There is actually not much to report, everyone is now under 12/12 :-). This is the last grow that comes in the entire diary. From now on, each plant will be added to the diary 👍. I wish you all a lot of fun watching, stay healthy 🙏🏻 and let it grow 😎👌

Hallo zusammen 🤙 Sie wächst sehr schön und macht keine Probleme

Alors aujourd'hui je fais du BHO et pour vous remercier de votre fidélité je vais vous montrer ma méthode (que j utilisé dans le passé (j ai depuis acheter du matériel un peut plus professionnel ;) Alors pour tous sa il vous faudra =1..2 seringue de 300ml ou plus dispo sur mamazon = des filtres à café (NON BLANCHIE !!!) =des colier de serrage pour fixer les filtres. = et bien sûr du gaz (butane et en général je prend du gaz filtrer 12x pour éviter les saleté qu il peut y avoir dans certain gaz . =et enfin il vous faudra un bol pour récupérer tous le nectar^^ (J UTILISE DES MOULES A GÂTEAUX EN SILICONE (rien qui accroche) Mais si vous utilisez un extracteur en plastique et ou un moule en silicone il faudra absolument prendre du butane et non pas DME =CAR LE DME ENMENE DES PARTICULES DE SILICONES EY DE PLASTIQUE LORS DU GAZAGE Voilà voilà je vais commencer et prendre des vidéo au fur et à mesure que je vais poster pour vous montrer . Après 1heure de dégazage vous aurez une fine couche ai fond qu il va falloir travailler pour y faire rentrer de l air (ne t inquiète pas j vais poster une vidéo se soir ou tu pourra voir comment faire..) Le crumble est je pense la seul sorte de bho que l on peut faire sans trop d équipement (pour le reste il faudrais evaporatrice rotative ou autre etc ) Avec le crumble c est votre main qui fais le travail = l objectif est que l air touche toute les partie de la patte comme sa le gaz sort et l air oxyde les trichome etc etc

Check out YouTube video SuperSmoker for more!

Smell is very sweet in box i like it they really smells like strawberries and pineapple

Jai du retirer 2 pieds mâles la think mint cookie et la ft og x banana og

This strain was easy to grow. I started out without an hygrometer. Due to delivery problems i had it very late and my girl noticed that becauce the envirement wasnt optimal for her. She did survive that period, after that she got defoliated multiple times, and i got really rough with her sometimes and broke of some stems, and that was no problem for her. I also had an encouter with thousands of thrips, which i had to nuke to remove them from my girl and she didnt even bother. In veg she was a good to handle, in flower it was a little bit harder and i think she likes alot more PK at the end of her lifetime than i offered her. But thats more of a guess. The smell matches more a cross between blueberry and lemon kush in my opinion. The gelato part is not so noticable at the end of the road.(for me atleast) But the blue in other hand is very dominant and strong by smell and taste. I ended up with hardrock buds even the smaller ones, so im very happy with the outcome. Because of my thrips invasion and usage of bioquant, i wanted to wash my buds for once to clean of all the dirt, dust, insect remains and other particles that shouldnt be in my bud. I did the oh so underrated BUDWASH, and wauw if would deffinatly recommend it to every grower with just a few plants. It really cleans your buds without effecting your potency, terps and overall buds. I also noticed that all buds dried at the same rate cause of the evenly spead moisture i guess. I ended up with 48.34 grams of hard and dry buds I took about 10 grams and turned it into superdelicious rosin because i also love to dab 😍 Thank you growdiaries for this amazing platform. I wanne give a big thumbs up to Barney's Farm for this strain, Keep up the good work. Also a big thumbs up and thanks to all the growers and bud lover for looking @ my diary and especially if you liked it, i appreciate it very much. It was a great journey and experience for me. Thanks again and till next time. And dont forget, Always Keep On Growing my friends, Peace. 😎✌️🏾

Vamos familia, actualizamos la octava semana de floración de estas Permanent maker de Seedstockers. La temperatura que estuvo entre los 24-25 grados y humedad dentro de los rangos correctos. En cuanto a las plantas pues estas últimas semanas cogimos un poco de trips y pues ahí ando combatiendo con planchas pegajosas de color azul, estiraron bien y ensancharon bastante también. Las flores se están llenas de tricomas y están acabando de madurar, aún con la plaga, por el momento todo correcto, ya está semana solo recibieron agua, estoy esperando para desinfectar todo por la plaga y poder empezar en nuevo proyecto. Hasta aquí todo lo de esta semana , ya queda nada, buenos humos. - os dejo por aquí un CÓDIGO: Eldruida Descuento para la tienda de MARS HYDRO. https://www.mars-hydro.com Hasta aquí todo, Buenos humos 💨💨💨

Week 11 June 2nd

I'll be using the 5x5 for my photoperiods Everything is starting to pop out of the soil now. Waiting on 2 more to pop out and that will be all of them🤞👍 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 CHECK OUT MY OTHER DIARIES TO SEE WHAT BREEDERS AND STRAINS I AM GROWING👍 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Ending week 6 of flower now. Some of the plants are yellowing. Not sure if it’s too much or not enough nutrients. PH has been measured for a while now and is on. Either way, I’m thinking it’s too late to try to correct. Buds are developing nicely and there should only be a few more weeks to go now. Basically just trying to make sure no catastrophes happen in the next few weeks. Suggestions always more than welcome! Thanks for taking a look.

Entwickeln sich der schöne👌🌱?

2/26 to 3/03 Veg Days 8 to 14 Week 2 Not much to talk about here. They took to the soil as expected with no issues. Feed this week was 2 cups of 6.3ph RO water twice with 4 days between and 4 days after the last feed. Feed plan next week will increase the amounts to 2.5 cups of plain-no-nute water with about 4 days between feeds. I still want to see the water run through, so if I need to use more than 2.5 cups I will. The idea is to water deep and through, but then make them search for more before the next feed, hopefuly spreading the roots out while doing it.