18.5.25: I watered with 3ltrs of dechlorinated water PH'd to 6.4. I added Per 6.5 litres; ♡ 1Tsp Sea K(elp) ♡ 1/2 Tsp Bud Explosion PK booster ♡ 7ml Trace PH: 6.4 PPM: 780 I added the PK booster this feeding, just to provide some phosphorus without risking an excess. Next time, I won't use it. 19.5.25. Northern lights had got quite bushy, and there were a lot of extra leaves covering up some prime budsites. So I went ahead and Defoliated some of the larger fan leaves that were covering and blocking out other buds. The plants are growing very fast. The buds are getting very nicely structured. Northern Lights is drinking about 3 l per day, and I will continue to use the Greenleaf nutrients sea kelp and Ecothrive Biosys, along with the Ecothrive trace For the calcium, magnesium and trace elements. She has indeed stopped stretching now and is focusing on the bud formations. It's a very lovely smell, too! 😋 I use these all the way through. ☆ Xpert Nutrients PH down, up to 1ml. ☆ Ecothrive Neutralise 1 drop per litre from the 1ml pipette, which is attached. This is my dechlorinator. 21.5.25: I defoliated today again. This time, I took a little more off than I did yesterday as things had become congested, and the buds in the centre weren't getting any light. I got covered in sticky...ness?! I forgot to wear gloves, but for some reason, my non dominant hand got covered in resin and the other, not at all. Anyway, I hope I've managed to include the before defoliation and after videos/photos. I think it's much better after, there's so many buds I couldn't even see in the centre! I probably should have done it sooner, but I was trying hard to take as little as possible this run. Anyway, this is the prime bud building period. So, taking the leaves covering all the centre colas will not only provide equal light penetration but also get rid of some of the nutrients stored in the leaves. So, any nutrients available in the remaining leaves can deplete to a happy medium. That being said, we're coming close to the end of mid flowering. I'm really hoping to produce some good sized colas! 🤞💚😉🍃😃🌱 I'm certain I won't be disappointed, she's looking 🔥😍😀😋 24.5.25: I watered with Ecothrive Biosys 3ltrs each. The plants are still drinking at least 2 litres per day. They are increasingly thirsty, and it's important that I don't let them dry out. The soil is mostly coco and perlite, so it can dry out quicker. There are plenty of worm castings, too, so that definitely helps. The buds are developing and progressing very nicely, keeping up with the flowering nutrients and alternating between Ecothrive Biosys, Trace, and Greenleaf Nutrients. 24.5.25: I watered with 2.5 ltrs of dechlorinated water PH'd to 6.3 I added Per 6.5 litres; ♡ 1Tsp Sea K(elp) ♡ 1/2 Tsp Bud Explosion ♡ 7ml Trace PH: 6.3 PPM: 840 SOLUTION TEMP: 30°C SOIL PH: 7 SOIL TEMP: 21°C AMBIENT TEMPERATURE: 23-26°C RELATIVE HUMIDITY: 58%. Thanks for stopping by 😊🌱🤞💚✌️🍃

Day 99 07/10/24 Monday Flushing this week Using de-chlorinated tap water 10L pH 6 with Flawless finish. Seeing her finalise and ripen this week will be satisfying 😍 Watching her colours transform, she's just stunning 👌 Picture and video update 📸 Day 101 09/10/24 Wednesday De-chlorinated tap water pH 6 only today. Day 103 11/10/24 Friday De-chlorinated tap water pH 6 only today again pH 6. Only 1.5L Day 104 12/10/24 Saturday Another Flush today, using 10L de-chlorinated tap water pH 6 with flawless finish. She really has darkened in colour now, fans showing a deep dark Purple / Black, the buds themselves are a deep dark purple, and absolutely laced with trichomes 🤤 Picture update tonight📸💚

They look fine, progress is slower that normal. I'm using some empty boxes and things like that under the pots in order to make em reach the light easier Also using some cord to help some girls grow more as a I want Removed some bottom leaves but I guess it's normal Just watered today so hopefully they start growing fat buds! Found that the oldest plant has already some brown pistils but its not big enough I guess Will try to make a better follow the next week on each oh them to show the diffs peace!!

♦️ Apliqué la ultima dosis de Delta9,via riego. Hice algo de supercropping y defoliación.Todo ok🤙🏻🤙🏻

Esta semana ya realice la poda. Se encuentra en estos momentos en etapa de secado dentro de una caja especial para secados de flores que uso siempre y nunca me falla. En humedo hay 195g y utilice una lampara led de 150w en todas sus etapas. Próximamente estaré publicando cuando este en curado.

MARSHYDRO LED DOING AN AWESOME JOB! DON'T MISS THE VIDEO!! SHORT!! THANKS 😎 GOPRO HERO SESSION WITH WGS FEIYU GIMBAL STABILIZER

Look at Cobbler Crisp!!! Day 79 today. Showing out!!! It ha been 11 full weeks. Today is day 1 of Week 12. I will harvest the larger two tomorrow (Friday) and I think the smaller two can go at least another week. Beautiful Plant!

05/03/22: Installed the industrial strength dehumidifier to keep the pesky humidity down - defoliated again to allow even light spread. lots of colas forming nicely - some brown pistils on certain plants aswell - plants should stop getting taller now and focus purely on bud production. trichomes are starting to appear on the sugar leaves and is starting to smell strong.

3.2.2024: Start of week 7 from seed. Fed 1/4 fox farm trio nutes plus calmag. 64oz at 6.5ph. There's some clear nute burn on the leaf tips but she's doing well. Super puffy bud sites with tons of long white pistils. Few random orange hairs here and there. 3.3.2024: Day 44 from seed. Steady as she goes. No change to current state. 3.4.2024: Watered 64oz at 6.5ph. No change...chugging along. 3.5.2024: Day 46. Buds are forming nicely. Some red hairs and trichomes on the sugar leaves. 3.6.2024: Day 47. Fed again at 1/4 strength with 3/4 gal of 6.5ph. Runoff tested at 6.49 just around 1000ppm. Solution going in was 300ppm 3.7.2024: Day 48. Plant doing its thing. One fan leave on the top has a touch of brown/red spotting. Can't tell if its light/nute related. Good bud development all around. 3.8.2024: Day 49, end of week 7 from seed. Watered 96oz at 6.38ph. Runoff ppm at 1050 with ph at 6.7. She appears to being doing great. Super stoked to see the bud development over the past week. I'm thinking the reddish hues the top sugar leaves are showing might be purple which is kinda cool. Doesn't seem like a deficency.

Well I was worried about my girl for most of the last week since I repotted her. But as you can see, she bounced back. Just took her about 5 days. Roots started spilling over the side so I through some soil on it. The soil will be removed during the reveal when the other roots are exposed.

First week of flower

Day 39 of flower. Noticing more bulk daily. Smells like sugary jelly donuts/bakery.

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Hi Dear Friends, 👨‍🌾 👩‍🌾 Plants showed some deficiencies, but we are recovering it. I prefer to have deficiencies instead excesses.. Maybe It was better if I started a week ago to give Top Veg. It is the biggest of the cycle and it is really fast. I notice a HUGE difference compared to other plants growed under the 480w quantum board. The Kush mintz Fast is under the the XS2000 by ViparSpectra and it is bigger and stronger compared to other plants. Small distance between internodes and stems hard like rocks. This lamp is really a beast, can't wait to try the new models!! ✅ VEGETATIVE week #7 (LAST WEEK) 30/12 SWITCH 12/12H 📅this week goes from 26/12 to 01/01.📅 💡💡💡Viparspectra XS2000 is working at 50% power. 💉🔍Fertilization schedule:🔍💉 26/12 3ml/lt TOP VEG 30/12 TOP MASS 0.2ml/L + 2.2 ml/L TOP VEG 31/12 SENSI CAL MAG EXTRA 2ml/L foliar spray WE ARE BACK!!! We are back after a little pause. We take a break because we were too busy to post high quality diaries. In the last diaries we tried to post as good as possible and we have to publish about 6 or 8 diaries (in addition to these that we will publish shortly). We opened also an educational Instagram page, we growed a lot in a short amount of time BUT, Instagram suspended our account and we lost all our posts, I was so sad and disappointed... a lot of work lost in a night.... In this diary you will see our journey with Kush Mintz Fast by Original Sensible 🤩, sit down and enjoy the show! We are growing in a 15L Smart Pot with Light Mix soil by BioBizz under the AWESOME XS2000 by Viparspectra 🤩 DATA SHEET: Bubba Kush , Animal Mints, Secret Hybrid Genetics: mostly Indica Yield: 650g/m² indoor flowering time: 50/55 days THC: 25% Aroma: cookie mint Effect: happy relaxed 💸💸💸💸💸 Here you can buy seeds of this top shelf strain: https://originalsensible.com/original-sensible-seeds-kush-mintz-fast~21711 _______________________________________________________________________ 🔧💡OUR SET UP💡🔧 ✔️ 💲💲💲VIPARSPECTRA 🚀🚀🚀🌕🌕 ViparSpectra®️ XS2000 240W Infrared Full Spectrum LED Grow Light: Excellent ratio between wattage and ppfd, excellent light penetraton, perfect light spectrum (it also has IR 🤩) and it has the best build quality on the market. Until now, built quality is really awesome. You can touch that quality. Materials are really strong, excellent driver and the best leds on the market. Heat dissipation is perfect, the lamp is never too hot and it has a passive dissipator so you will have zero noise. It also has IP65 certification. I like that this lamp is bigger than others, so the 240w of power are well distribuited on the space. Viparspectra has an awesome customer service, and shipping was creazy fast! This awesome brand also offers 3 years warranty. This lamp has no rivals. A special thanks to Emily of Viparspectra ❤️❤️❤️❤️ HERE YOU CAN BUY THIS PROFESSIONAL LIGHT: https://www.viparspectra.com/products/xs-series-xs2000 or https://amzn.to/3dyUoJl and here you can buy other awesome stuff: https://www.viparspectra.com ✔️ 💲💲💲MARSHYDRO 🚀🚀🚀🌕🌕 📦120X120 GROW TENT: an awesome box, easy and fast to assembly. Made by strong materials, solid zips and it is totally lightproof. The position of holes is optimal and the two lateral windows will make easier the work inside the box. There is also a double end, so you are 100% sure that dirt or liquids will not spill out. You can find it here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-48x48x80-1680d-4-x-4-size-keeps-all-light-in-top-quality-1680d-canvas-is-tear-proof-and-double-stitched-light-blocking-fast-installation-for-sale 💡TS 600 FULL SPECTRUM 100W LED GROW LIGHT : with this light you will achieve excellent buds, you will not need anything more. This lamp replace a 150w HPS lamp, but, with this Led Light you will smoke bigger, harder and tastier buds because Led have a complete spectrum and a powerful light penetration, so your plants will work as much as possible to make you happy. Psssssss it it extremely cheap and it is only 100w, your bills will never be too high, YOU HAVE NO EXCUSES!! Here if you want this little beast: https://www.mars-hydro.com/led-grow-light/mars-ts-series-led-grow-light/mars-tsw-600-led-full-spectrum-hydroponic-led-grow-light Thank you Eleen of Marshydro❤️❤️❤️❤️ 💣Quantum board - 480w - 4x120w Boards by Zhoangshan Koray Opto-Electronic Ltd. Samsung LM301B 288 led/board 3000K 0dB noise +24led/board led Osram 660nm Efficiency 2.6 umol/J 220 lm/w Driver: Meanwell HLG-480H-36B 💣Quantum board - 240w - 2x120w Boards by Shenzen Yuanhui Led Ltd. Samsung LM301H 504 led 3500K 0dB noise +24led/board led Osram 660nm Efficiency 2.7 umol/J 220 lm/w Driver: Meanwell HLG-240H-48B -ESTRACTION FAN: Blauberg 125 Turbo Pro Series Maximum air flow: 430-560 m³ / h 50W 32-44 dBA -FANS: A)OSCILLATING FAN D.15cm 2 speeds 20w B) COMPUTER FAN Sunon DP200A – 230V 20w (Strong, reliable and quiet) C)Cornawall Electronics Multifan Turbo, three speeds, can be used both on support surfaces and mounted on the wall. High capacity, about 740 m3 / h. High silence and reliability. 💊💉💊FEEDINGS: We used BioBizz light Mix TOP CROP: -DEEPER UNDERGROUND: to stimulate roots system -TOP VEG: for a excellent growth in the vegetative phase -GREEN EXPLOSION: to promote creation of bud sites and to allow a faster growth -MICRO VITA: bacterias for equilibrate the soil and to make the plant healty -BIG ONE: to stimulate bud sites and to stimulate resin production -TOP BLOOM: to achieve excellent big and hard buds -TOP CANDY: to feed the buds with molasses for a tastier smoke and to gain weight -TOP BUD: to enlarge buds and to gain weight PLAGRON: PK 13-14 to have big and hard buds and to feed plants with lower effort ADVANCED NUTRIENTS: Sensi Cal-Mag Extra-> for cal mag deficiency GROTEK: CAL MAG for cal mag deficiency HESI: PowerZyme to clean and balance the soil. It feeds the plant cleaning the soil. GHE: - Final Part (ex Ripen) accelerate the final flowering phase, dissolves minerals in excess - Flash Clean to flush the plant and to be sure that all excesses are out from plant and pot These two products improve A LOT the smoke of our babies -PURPINATOR to stimulate flavonoids and to have a better taste and smell. ____________________________________________________________________________________________ 🙏❤️ THANK YOU FOR BEING HERE ❤️🙏 Please leave a comment with your opinions, it is very important to us to have a comparison. If you like our job, tap the weed button and follow us. It will be really appreciated.🙏 We want to thank again everyone that help us in our project. You support us to support our dream. ❤️ SPREAD THE LOVE OF THIS PLANT ALL AROUND THE WORLD 🌿Thank you again🌿 ❤️Sweet hugs❤️ 👨‍🌾CHILLING_RACOONS👩‍🌾

Day 63 from seed, about 5 weeks into flower 🌹✌️🏽🌱 Plant has finally stopped growing vertically, stopped at 57 cm, Considering the topping and LST, that's pretty high i would say. Had to do another huge defoliation and cutting down all immature branches and popcorn buds. Also started to add Atami bloombastic (pk14-15) for the second stage of flower. All in all everything is going smoothly now, buds getting bigger in size, although still fluffy. Hopefully they'll get danser in the next week or so🤞🏽 Until next week ppl 😎✌️🏽💚

A planta está bem saudável, numa fase de Pré Floração, ja comecei a incluir fertilizante de Floração, fiz uma desfoliação de Pré Floração e ajustei os ganchos abrindo mais os galhos.

Things are looking decent. Bud sites are starting to get nice and hairy. The blackberry breath pheno in the center of the room is chunking up like crazy and quite a bit faster than the rest. It might finish early or just be a super thick pheno. I’m going to give a fish fertilizer nitrogen boost to all plants that are yellowing, including the nice blackberry breath pheno. I’ve started a new living soil pile. I took the left over super soil from some of the male plants, mixed in a generous amount of dry compost, worm castings and natures pride bloom, sprinkled a shit ton of great white and mixed it all up. I also recently got another brand of beneficial bacteria called Dr. Mary Janes. Mixed a good amount of that in. I also found a good mychorizzae called WOW Organics. I mixed up a ton and then sprinkled a layer on top. I grinded up some oatmeal and sprinkled another layer over the mykes. I then mixed up a full strength feed of some Alaska fish and molasses and then saturated the medium. In a month or so there should be a nice layer of mycelium over the top layer

This was the first time using the LED panels, they have much better canopy penetration than HID. I started at 12 inches, the leaves showed signs of light stress. The lights were moved back 6-8". Fan leaf growth rate is averaging 1/4" a day. 18"H x 6"W.

Week 9 for Strawberry gorilla by fast buds Shes getting so close to the end 😍 I had to remove a little bit of bud rot at the start of the week, but ever since haven't been able to find anymore developing 😇 Quite surprising how little water these girls drink... still only got fed once this week with a bit of (WCA) Water Soluble Calcium & (FFJ) Fermented fruit juice for its last few weeks of life now. Really excepted her to drink more with this hot hot weather.