Likes
108
Share
Gracias al equipo de Sweet Seeds y a Marshydro, sin ellos esto no seria posible. Excelente hibridación de dos de nuestros mejores clones élite de genéticas procedentes de USA. En el cruce interviene un clon seleccionado de San Fernando Valley OG Kush, caracterizado por un agradable y complejo aroma con fuerte presencia de limón procedente de la Lemon Thai que interviene en el cruce original de las OG Kush. El otro clon élite que interviene en el cruce es una Kosher Kush, otra genética OG Kush muy apreciada en la zona de Los Angeles y alrededores (California). De aroma muy agradable y penetrante, con tonos originales OG Kush muy alimonados y tonos de disolvente, pinceladas de especias, maderas y ciprés azul. El aspecto de las plantas es de híbrido índico-sativo con predominancia sativa. Estas variedades americanas con fuerte presencia del terpeno limoneno son muy apreciadas en USA para la realización de extracciones cannábicas. 🌻 🚀 Consigue aquí tus semillas: https://sweetseeds.es/es/semillas-fotodependientes/2345-san-fernando-lemon-kush.html 💡 Mars Hydro TS 3000, como la lámpara de cultivo LED más grande de la serie TS, ofrece suficiente cobertura para un área de 4 × 4 pies con un precio asequible y rendimientos de calidad; a cambio, se puede aplicar tanto al cultivo doméstico como al cultivo comercial. Potencia - 450w Cobertura Vegetal – 5×5 pies Cobertura de flores - 4 × 4 pies La opción abrumadora para la mayoría de los productores que la aplican en tiendas de campaña. Consigue aqui tu lámpara: https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 📆 Semana 8: Finalizando la etapa de engorde, esto va que vuela 😍, la resina esta cada vez mas presente ❄️ , los cogollos comienzan a madurar Esta semana estará el TS-3000 de MarshHydro al 100% y 30cm de distancia. Se estan desarrollando mejor que nunca, con una floracion mucho mas rapida, noto una gran mejoria gracias al Marshydro TS-3000. Continuo con defoliaciones Estoy impresionado con esta planta 😍🔥😎 Aplico una solución con nutrientes EC 1500 y otra con agua del grifo reposada y PH 6.6
Likes
9
Share
@TeaTime
Follow
This cultivation I lost a little bit the size that could reach . 😓 The light stayed too much close of the plant .
Likes
3
Share
Likes
16
Share
@BLAZED
Follow
Week 18 (26-5 to 1-6) 26-5 Temps: 19.5 to 24 degrees Humidity: 44% to 58% Watering: Both 1000 ml. EC: 1.3 27-5 Temps: 19.8 to 25.9 degrees Humidity: 48% to 58% Watering: Both 1000 ml. EC: 0.3 28-5 Temps: 20.4 to 25.9 degrees Humidity: 49% to 60% Light set from 75% to 70% strength. 29-5 Temps: 20.5 to 26.2 degrees Humidity: 52% to 59% Watering: Both 1000 ml. EC: 0.3 30-5 Temps: 21.8 to 26 degrees Humidity: 54% to 62% Watering #1: 1000 ml. #2: 750 ml. EC: 0.3 Light set from 70% to 60% strength. 31-5 Temps: 22.1 to 25.9 degrees Humidity: 52% to 60% Watering: Both 1000 ml. EC: 0.0 1-6 Temps: 20.5 to 24.9 degrees Humidity: 49% to 61% Watering: Both 1000 ml. EC: 0.0 Will harvest next week!
Likes
39
Share
'Sup Growmies, hope everyone's crop is doing great! Buds! flowering has started and the first bud sites have established, my canopy is pretty even, and I am pretty happy with her at the moment, I cannot wait to see how these flowers develop! The tent smells amazing, I cannot place the smell, its not your typical early flower weed smell, most of the normal green growth chlorophyll smell is already dying down. My time-lapse camera broke, so i'll have to figure out something new because I really liked watching them grow. also added some extra shots of the canopy in the video, which is probably what I'll do next week as I find a solution. I also want another bucket, outside of the tent, acting as reservoir, I think next week I am going to turn this DWC into a 1 bucket RDWC, for easier access and more importantly better temperature control. Plus, this plant drinks way too much, I can't keep up, even with this massive 33 Litre mayonnaise bucket, I'll add a picture of what I have in mind.. Next week I am starting Green sensation, its a finisher, which will give this girl access to some much needed PK for those pretty flowers. Thank you for stopping by, enjoy the rest of your week, stay safe; and keep growing!
Likes
15
Share
Likes
14
Share
@Terpyboyz
Follow
Hi everyone 👊🏻 thanks for checking in 😏, so we have started flowering this week on the bigger tent using the 2 Lumii 720w LEDs, we might or might not run into some hight issues well see… And we have the other 1.2 tent set up for the clones there under 1 Lumii 720w led delivered until I can another one sorted few weeks 🤙🏻 get them under that for a few weeks then get them flowering as well. Keep eyes open for progress 👌🏻
Likes
30
Share
10000 ml jeden 3 Tag in der einundzwanzigste Woche pH-Wert: 6,2 EC-Wert: 1,1 mS/cm Temperatur: 24ºC Luftfeuchtigkeit: 60% Schädlingsbekämpfung: / Düngemittel: Sie bekommen ab jetzt Brenneseljauche und Schachtelhalmjauche da sie im Outdoor Bereich ist. Besonderheiten: Wir mussten sie jetzt toppen da sie zu hoch wurde und das Dach berührte, es besteht die Gefahr von Schimmel oder das die Blätter Schlächter wachsen. -Tag 141 Wir sind schon am Verzweifeln, denn es blüht nicht. Heute haben wir es mit Schachtelhalmjauche gegossen.
Likes
3
Share
06.06.20Hace varios dias transplanté a todas a una maceta de 15 litros pero con sólo 9 litros de sustrato. Hice una aplicación de estimulante de raíz para atenuar el estrés por transplante. 10.06.20 Regué con toda la línea Top crop, muestran un buen crecimiento
Likes
29
Share
Plantas muy facil de cultivar y muy rapida .. en solo 9 semanas me saque en la #1 85g y en la #2 - #3 unos 50 cada una... en cada foto teneis el seguimento de cada planta desde la semilla a los cogollos.. consejo para todos de el banco de sweets seeds ✌️✌️
Likes
9
Share
@Ronin716
Follow
Loved it!! Relatively easy going!! Couple off moments but not worth getting into but the smell!!! It’s not super strong where you smell it throughout the house when you burp the jars but she has a very (what I could only reference as sour, sweet and lemony, almost like that lemon pledge your mom use to clean the house with) smell but I love it!!!
Likes
1
Share
Likes
18
Share
@Pokan187
Follow
All is good so far, the seeds of all the different strains have been quite vigorous. Lost my first sour diesel due to my impatience, but the second time around was a charm .
Likes
26
Share
Day 36: "Hey everyone! Just a quick update: I removed a few more leaves here and there and did one last round of LST (low stress training). 🌿 The plants are looking great, and I'm going to let them recover now before sending them into the flowering stage. I'm really excited to see them start blooming in 2-3 weeks! Also, a quick update on our temperature issue: today, the temperature stayed below 26.8°C, which is great news! However, we still need to find a solution to keep the humidity levels up. Our 360 m³/h exhaust system isn't able to maintain the required humidity level. I've calculated that we need a humidifier that can evaporate 1800ml/h to maintain 60-70% humidity, which would help manage the temperature better. Does anyone have tips for a good humidifier or other methods to control the humidity and temperature? Any advice would be greatly appreciated! Day 37: Hey everyone! Tomorrow, we're planning to buy some Cal-Mag because we suspect the yellowing leaves might be due to a calcium-magnesium deficiency. We're also going to get a pH test kit to make sure everything is balanced properly. Do you think this is a good idea? Any tips or suggestions would be greatly appreciated! Day 38: Hey everyone! Quick update: it turns out the yellowing leaves were due to a nitrogen deficiency. We increased the fertilizer dosage today, so the plants should start looking better in 4 to 5 days. 🌿 Thanks for all the support and suggestions Day 39: Hey everyone! Another quick update: after increasing the fertilizer yesterday to address the nitrogen deficiency, it should take about 4 to 5 days for the yellow leaves to turn green again. 🌿 We're already seeing improvements! The plants have grown significantly and are developing a dense canopy once more. It's great to see them bouncing back so quickly! Day 41: "Hey everyone! Quick update: we've removed the bands we were using for LST (low stress training) and are now letting the plants grow freely. 🌿 We plan to keep them in the vegetative phase for about one more week before transitioning them to the flowering phase. Excited to see how they continue to develop!"
Likes
48
Share
Beginning of week... She is doing her thing.. Slowly but surely lol.. Healthy as far as I can tell.. Maybe the reused coco is too reused? Idk. There is a bit of coco/perlite from my first grow in there lol.. Some others too.. But she is still truckin along.. Went up on the Armor Si (Silica) and a little on the FloraGro.. She does look like she is gonna beginning flowering very soon tho.. Pistils are forming slowly.. Much like the rest of this grow.. But she is starting.. I'm not going to start counting flower till I actually see that she is flowering.. Stretching and all.. That's how I like to count flower.. Always seems to line up perfectly when you count flower that way.. Even with photoperiods.. Not from the 12/12 flip because there is still 2 weeks of transition. Anyways.. Another week in the making... Next day... So my Mars Hydro is crapping out. I have to drop it down to 20 inches from the canopy and run it at 75%.. So pissed.. It glows when it is powered off and still plugged in.. And if I turn it on while the power is set to 100%.. It just blinks until I turn it down to 75%.. I can have it set to 75% and it will turn on like normal.. But I need to use 100% power.. And Mars Hydro sucks with responding to emails apparently.. I'm gonna have to buy a new one and return this POS.. Then hopefully buy a new stronger light for my 2x2.. I am so pissed.. Mars Hydro sucks.. The build is amazing.. The components are awesome when they are not flawed.. But damn this is the 3rd light to crap out on me in 2 years.. I do nothing but run them 18/6 or 12/12.. Run 1 fan on top at the driver and heatsink and 1 under toward the diodes.. Nothing different.. I think I'm gonna buy the Wakyme J-2000.. It comes with 2 fans blowing on the heatsink.. Honestly, noise is not an issue to me.. Heat is.. I sleep with all my fans running already lol.. Its actually hard to sleep without them now hahah.. But yeah. It has a Meanwell driver.. Samsung diodes.. Dimmer.. And the fans.. I think it's my best bet at this point.. Fuck Mars Hydro.. They had 3 chances with me.. My Sunraise 1000 (blurple) is like 4 years old and still running strong.. Smh.. Mars Hydro is crap. How did they even get so popular??? I'm sure more people will realize how crappy they really are.. No name brand everything.. Runs hot as ass.. Craps out after 3 - 4 months.. So so pissed... Almost mid week.. I went ahead and pulled a couple branches down a bit.. The canopy is perfectly even.. It looks AwEsOmE! Lol Mid week.. Well, she seems to be doing a bit better than before, I'd say. Normally, my previous autos would be flowering and probably almost finished stretching by now.. Live and learn.. I hope all the Zkittlez Autoflower seeds aren't like this.. And hopefully this strain turns out pretty dank to be wasting a few extra weeks on growth but not getting much growth at the same time.. And I hope harvest doesn't come quicker than the swelling of the calyxes.. But shit happens.. I have Mars Hydro sending me a new driver/dimmer. I sure hope it's just "plug-in" because if I'm going to take this light apart, I'm just going to go with the Meanwell HLG-240H-54B.. From what I was told from LEDSupplier dot com.. The 240W would be better due to the different current. We are still trying to figure out if the dimmer is 0-10V to see if I can just keep using the Mars Hydro dimmer along with the MeanWell HLG-240H-54B.. That would be cool.. Sorry but Mars Hydro sucks.. I bet running a different driver would help alot of issues.. Maybe even run cooler. Anyways.. About the plant lol.. She is doing great.. The stiples are still showing some weird colors on the tips.. Doesn't seem like an issue.. Some plants have the stems change colors.. Some have pistils change colors.. Some have leaves change colors.. Maybe that is just in her genetics.. The pics that ILGM shows, it should be a pretty colorful strain.. Guess we shall see! But she is happy and healthy.. I think I'm going to stop using Hydroguard next week.. Just doesn't seem like it's doing much of anything.. I really only bought it to fight root rot when I attempt DWC which I am going to attempt again very soon.. Maybe after this grow... We shall see... Almost end of week.. Went ahead and defoliated/lollipopped a bit. She was getting too bunched together.. She is nice and opened up now.. 2 side branches stayed pretty short.. Not sure what that is all about.. Flowers are slowly forming at this point. Next week will be week 1 of flower and stretching should begin! She is still getting good light even with the power only being at 75%.. Just have it down lower.. Which I could get away with till harvest.. But fuck that. I ordered a new Mars Hydro TS 1000.. And Mars Hydro is also sending me a new driver/dimmer box to replace the old one.. Going to return the light and I still want to replace the stock driver with the MeanWell.. Trying to get more professional opinions before I attempt that tho.. So far, I am hearing to get the HLG-240H-54B.. The 150H (150W) doesnt have the correct current so I'd have to go with the 240H (240W) due to the output current and voltage to match correctly. Can't wait to try it out! End of week.. So I got a new Mars Hydro TS 1000 in.. It comes with a Moso driver instead of the old Juson driver.. Hmm.. Ok.. Seems to not heat up as much.. The diodes still get hot, but the lack of the driver heat should help keep things cool.. Nice... I am able to raise the light back up and run her at 100% power.. I went ahead and tied the branches down a little more.. There are 2 that are still staying a little short.. But I think it's the way I started the whole LST process.. I should have tied down a different 90° angle instead of the angle I used.. But live and learn.. Wont use that way again lol.. Other than that, the flowers are forming nicely.. Happy happy happy.. Next week will begin flower! Niceeee.. On to the next!!!...
Processing
Likes
7
Share
Into week 5 of flower and it's time for a change out of the Nutrients and add some Fresh RO water and Power To Bloom followed 4 days later with some UMP. She is bouncing back just nicely and now takes on more feedings so running the RO water has been a daily task. She looks good and producing well.
Likes
6
Share
Привет садоводы растение выглядит на отлично и имеет красивые формы верхняя кола выше остальных веток цвет листьев хороший вот только горшок маловат быстро пересыхает попробую пересадить