Moved her into a 27 L pot and started tying her down and spreading her out , had a small accident and ripped off a branch so had to duct tape it on and support it , pretty sure she’ll be sweet . Same same next week then start thinking about flipping into flower

Day 22: Drain EC 3 feet high and risin'😅( average 3.3 to be exact...) dunno how much whatever-salt is building up in that pots, but it obviuosly doesn't bother the ladies. Dark green colour, very few 'claws', no signs of tipp-burn, new foliage appears in a juicy green and turns dark in an instant, leafs point upwards....... looks like they're happy😊. Planns for this week: - Install the scrog-net - Obsereve plants/soil ( when do i have to feed nutrients again?) otherwise there will be no changes...... Thoughts: These bushy babies will be kind of a challlenge to create this scrog the way i'm used to (basically bending the 4 main main colas to the corners of the tent, upper branches to the walls and spaces between the pants, lower branches to the very center). Now these ladies make so many branches, so close togehter and so equal in length, underneath huge fanleafs..... i'd love to have them in a 100 square meter canna-crib....but in a tent...????? I really hate doin' things without having them planned - but in this case i guess i will have to install the net, start weaving and see what's happening😯 Day 23 Let's keep it positive...... indoor-climate of 64% rh is perfect for my health💪😁!!! ......but in my tent it's killing the vpd😖. at a lousy 24 degrees C, i'm readin' about 60-64 % rh wich results in about 0.7 to 0.8 kPa.* More figures? Here come the crazyones👻!: pH 5.5; EC 4.2😨 but thats only drain from plant 3....... average was 6.1/3.6 The girls busy produce roots, shoots and leafs....... still very green, still not unhealthy.......few claws, no tipp-burn. Basically a comfortable place to be: It's not bad yet - no work but watering - and it can only get better!!!😁 *VPD issue solved: The sensor hung too close to a fanleaf - didn‘t expect this thing beeing so sensitive 😅. Day 24 Climbed new hights this morning: Plant 1 had an EC of 3.8 - the others didn't climb any higher than yesterday. So maybe we've reached the climax..... 😇 Visible growth now - so i installed the scrog-net and will start bending and weaving these days:-) Thoughts: Did beeing out of VPD-range for one day harm my plants? How exact can my sensor measure VPD? after a bit of research i found out: Whatever you buy for less than 200 bucks is far from beeing exact! Even professional sensors have a margin of about +/- 1% in relative humidity. Thermometers at least +/- 0.5 degrees C. This could give some a good guess of the actual VPD BUT: Leaf-temperature-offset is absolute key! Many of our trusted homegrow-equippment isn't even able to measure it (some offer default temp-offset) ....don't wanna go further here - but there's no way to achieve something like a precise VPD-measurement in homegrowing. So why caring for VPD? Even with those less accurate instruments, you may be able to keep your plants in something like a comfort-zone. Way better than only guessing 👆!!! In case i ran a much higher VPD than planned, yesterday (due to a missplaced sensor) , it will not harm or kill my plants. they might have had a bit of stress from dry air - but nothing to worry about! Day 24: Decreasing salt-levels in the drain - excepting plant 4, wich had an EC of 4.0 - so i guess i'm slowly draining exess-salts from top to bottom and might have collected some build-up. The girls seem to be quite okay. Root-growth is vigorous (there are thick, white roots penetrating through the pots, everywhere), the stems are relatively thin. removed the LST-lines. the Sc.r.o.g: only materiels needed, were a climbing-net for gardening (HDPE) cut to 90x90 for my 1x1 tent, 4 cable-ties and 2 meters of strong rubber-cord. Pre-installed the net with the cable-ties, then weaved the cord around the outter cords of the net, led it aroud the posts and pulled tight. Then brought the net into it's final position. Not as sturdy as with a wooden frame - but i had less than half the work and a bit of freedom to move things if necessary. Any shoot will now be put to the next outter square (relative to the center of each plant) as soon as can be held by the net, without harming the top. Once i moved all of the dominant colas to the next square, i'll have to take 10-15cm steps (vertical growth), to reach the next square. As soon as i have about 70 of my 81 squares filled, i'm going to flip to 12/12. Since i'm plannin' to have them full of sugar when flippin', i don't expect too much of a stretch. This way i hopefully have the longest and strongest shoots framing the shorter ones in the center - so the canopy shapes like a bowl, in order to achieve the most even light distribution possible. Day 25: The main colas visibly reached out for the light - but yet i only moved 1 single shoot to the next square. Girls look good, EC is dropping slowly, climate fine. CU tomorrow👋 day 26: on Track... nothing to worry about...... till day 28....... Due to high EC levels in the soil, i couldn't do much more than pour out some water and prepare the scrog this week. Next week i will have to do some weaving. If the nutrientlevels allow, i'll do some defoliation.

Low yeild for 15 week cycle but it is what it is. I'm certain it would have been amazing if I'd have gave it everything I had. Grownn in a 2x2 and was neglected. Was only watered a handful of times and gave nutrients even less. Low yeild but wasn't too bothered as this was just a novelty grow for me and didn't really need the yeild from it.

Start of Week 2 Flower. Looks like the fan is blocking some light on the far left and will replace it with a slim profile box fan. Also found a light leak coming from a vent and

10/10/21 new week for CBD spliff berry Growing almost a month now did some topping last week and today started to LST the main everything going great so far plants loving the new FC-4800 so as i absolutely no extra heat is coming of them 👌🏻 I maybe will top some more but as far it Goes for LST this will be the only thing i will do to the plants let the rest grow freely 14/10/21 Growing very nicely giving them the watering and nutrients when they need it . I am trying to understand plants better by looking at feeling soil etc instead of a regiment. And learning we do every day because bin growing in 11L pots but now in 8L pots so that means that there gone be smaller then my first grow . But hey got now 12 plants going on and not 4 so that will help lol 15/10/21 Did some small defoliation and some of them get light penetrating better visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Fully marshydro supported Setup: Marshydro GT120x120x200 Marshydro FC-4800 LED lamp Mars Hydro tent handy info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter.

Germination with no problems

Theses are short girls but they have large thick trichome covered colas They love their food and have took full feeds with no signs of nute burn from week one They have a nice fresh fruity sent from their sticky buds ,

This is all I want to grow, and that says a lot, trust me

Week 3 By week three, the plant begins to show a clearer structure. Leaf size increases slightly, and the stem thickens just enough to support the growing foliage. Internodal spacing remains tight, reinforcing its compact growth pattern. The plant still lags behind others in height and spread, but its overall appearance remains healthy and controlled. There are no visual deficiencies, and growth continues steadily, if modestly.

🏆 Harvest Report – Seriotica (Grow complete) After a full 10 weeks of flowering, Seriotica was harvested right on schedule in Week 14. She delivered a solid yield of 123.08 g of dry buds 🌿 🔹 Highlights: Compact colas with a strong frost finish ❄️ Creamy, earthy aroma with subtle reddish-purple coloration Exceptionally stable throughout the entire grow – no deficiencies, no stress, no surprises Summary: Nutrients: Advanced Nutrients Masterline (pH Perfect) Medium: Plagron Lightmix / Coco 80/20 Seriotica was definitely a standout – both visually and in performance. More than happy with the results on this one 💯

Let the new week begin 💪 We transfer plant in to the big pot and make toping 💪👍 I hope plant had minimum stress 😬

This week was very good, growed good. I topped her and gave an lst. Turned down the light to 20 hours. Hope its worth. Have a nice week✌️✌️

Ala Erstes muss ich mich für die Bilder entschuldigen...Mein Handy ist leider defekt und das Ersatz Handy bringt nich so gute Bilder hervor ! Blüte hat richtig gut eingesetzt ,hab Heute ein Paar Blätter geschnitten und ein Paar nach unten bzw. nach innen gebogen weil sie so extrem Buschig sind und ich befürchtete das die neuen Triebe bzw. Blüten nicht genug Licht abbekommen . Die 1 kleinere Pflanze hinten Rechts hab ich leicht erhöht das sie mit den anderen 3 gleich auf ist "unterschied 9 cm" ! Das Netz wird nur zur Stabilisierung der Pflanzen genutzt und gedüngt wird jetzt mit Biobizz : Grow 1,5ml pro Woche (Montag 0,75 & Samstag 0,75 pro Pflanze ) Bloom 2ml pro Woche (Montag 1ml & Samstag 1ml pro Pflanze ) Top Max 1ml pro Woche (Montag 0,5 ml & Samstag 0,5 ml pro Pflanze)

Flowering day 49 since time change to 12 / 12 h Hey guys :-) All ladies look very healthy and delicious :-) We're slowly getting closer to the end. Watering was done twice this week, each time with 1.2 l (sewing materials see table above) At the next watering there is a very light rinse with Clean Fruits so that the last nutrients can be slowly used up. The trichomes are now checked every day. I'm looking for my microscope with an app so I can take pictures of it 👍. I wish you a lot of fun with the update and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : Clearwater Seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany

seeds: Montel Iced Tea, Body Count, Bubbles Blueberry F4, Ricky’s Hash Plant, Black Tangi Tea → standouts / "otherworldly" These are clearly your current stars — better structure, resin, and overall quality than most of the others you've tried. Auto Flowers: Humboldt Seed Company — best autos you've grown. Extremely resinous, especially the OG Triploid. Top tier for autos. Fast Buds — very close second. Super fast, nice flavors, reliable. You like them a lot but note they're in a different class (not fair to directly compare to Humboldt). Why RQS Strains Underperformed The 7/10 rating and "needed a lot of power to switch to flower" comment is classic for some RQS genetics, especially certain autos or hybrids. Possible reasons: Genetics: Some RQS lines are finicky about light schedules or have slower/more reluctant flowering responses. Mike Tyson 2.0 and Corkscrew apparently needed the 12/12 flip to finally push. Light/Environment: With five tents running, light penetration, spectrum, or intensity might not have been ideal for these particular strains. Autos can be sensitive to stress during the transition. Nutrient response: They may have needed more phosphorus/potassium or different ratios to bulk up properly. The fact that you had to force Corkscrew into 12/12 at week 20 and it's now only "OK" suggests it was a slower or lower-yielding pheno for your conditions. Strong Performers Brothers Grimm → These sound like the real winners in your tent right now. Brothers Grimm has a reputation for unique, high-quality landrace-influenced genetics with excellent resin and flavor profiles. "Otherworldly better" is high praise — they clearly thrive in your setup. Humboldt Seed Company autos → Excellent choice for resin production. OG Triploid is a standout for trichome density. Fast Buds → Reliable, fast, flavorful — a safe, consistent auto line. Recommendations Going Forward Double down on what works: Keep running more Brothers Grimm (especially the ones you loved). Stick with Humboldt for autos when you want maximum resin. Fast Buds for speed and flavor. 3/30 4am Pink Kush CBD is SLOW.... she never really recovered from early problems, I LOVE this strain, smoke and smell are 10/10. I blew it up early from problems that are NOT MY FAULT. so there. 4/1 12pm We're gonna need a bigger TENT!!!💐🌼Humboldt Seed company email today...Im doing this!!! https://californiahempseeds.com/garden-seeds/

Hello everyone, fellow gardeners! Welcome back to a new harvest in Peaky Gardens! Growing this genetics was fun and easy , one of the three STRAIN has reached its peak and I can't wait to try it....it shines like a diamond! it is so beautiful that I thought of getting a gem to have it set and put on my finger😜 Stay updated

Day 74 and there getting chopped today! I thought the harvest was going to be broken into two separate weeks considering the times on the Choco was listed about 7-10 days sooner then the DD (wich was listed at 70 days for flowering) However looking at the tricombs on the Chocolate Marshmallow most pheno didnt start getting amber untill the DDs did as well! A couple DD pheno could have maybe gone a couple more days but we will see! Going for reveg on all the pheno, since i didnt get to take any clones. We will see how it goes!

Day 9 of flower, very overcrowded in this 4x8! All the plants will be coming out in the next day or two for a severe defoliation. Looking forward to seeing how this cultivar performs, seen good results from a friend of mine