Likes
Comments
Share
@Elmakka
Follow
suuuuper flowers really strong an good smell, let it dry and curing then ill enjoy it
Likes
1
Share
@teabee
Follow
pretty happy with it, nice yield, one plant was perfectly fine and one was a little rough near the end, one plants nugs were very dense the other plants was a bit on the fluffier side. Nice strain but a great rosin producer..
Likes
9
Share
@Fyno_TH
Follow
🌸 Flowering Week 7 — Frost Incoming! ❄️🔥 Short update this week — but the Queen is really starting to shine. Buds are swelling fast, stacking beautifully, and the first layer of frost is officially here. Trichomes are popping everywhere under the light ✨🌿 Aroma also kicked up a level… sweet, citrusy and loud every time I open the tent. She’s drinking well, holding strong, and no signs of stress at all. If she keeps building like this, the last few weeks are going to be crazy
Processing
Likes
13
Share
This Dinamex from Dinafem is starting to really bud and is very stunted so I took a chance and transplanted her to a little bit more soil. The last of what’s I had because one of my other plants was a male. So flipped her over and she is kicking ass to say the least. Can’t wait to still see what I get out of his “solo Cup”grow
Processing
Likes
13
Share
Plants are really taking off! Smell in the tent is strong, widow is still stretching but the PT is not stretching so much as she is still seeming to try and bush-up so to speak. I have all three plants in the ScrOG net and it seems I will have a full tent. Buds are beginning to form and add some bulk to them as well. Took pictures with lights off this time to show how they’re growing.
Processing
Likes
55
Share
@Max1973
Follow
Day 37 - Everything looks good.... they are drinking so much.... i built a bit more stable light setup, and i'll need to buy afew more plugs and stuff, to fill it out ...... i organised all the 2700k globes, ready to swap in..... still waiting on the exhaust fan, so i'll keep em in "grow" mode another week or 2 .... i'm vaping a leaf or 2, and drinking "green tea hot chocolates" .... it is so delicious in hot chocolate .... my health has picked up since starting the vape/drinks... the 21 thc/19 cbd is supa healthy ... Day 38 - Getting them ready for Flower, noticed they are lacking in nutrients, so i started em on the heavier dutch master gold flower nutrients. Day 40 - Added some pics. (they look droopy because they in night mode, just turned on lights for pic) - Started them on 12/12 flower, still working on getting all the lights, gear, and globes, for the right spectrum and amount of light.... atm got - 7x 2700k (click) , 2x 6400k (osram), + 60w light panel .... i'll go get some more gear today and hope to expand it to 10x 2700k , 2x 6400k ...... I put the exhaust filter fan on seperate power, so it doesn't go on/off with the timer, but stays on all the time.... it totally fixed up any odour problems, haha ....... Added some different pics for my light spectrum ... etc..... the outside winter temp is now at 40-60oF (5-15oC) so with the 12/12h, the temp inside the tent is dropping to 60-80oF (18-22oC), abit low, but flowering is supposed to be in winter, so idk, see how it goes..... I'm new to growing, so idk how this will work out....... just working it as i go.... i noticed afew spots on a leaf, so i upped the neuts abit more, they are still drinking like fish, huge amounts.... Day 40 late - new vids - Got the extra gear and installed it all... redesigned the initial setup, refined it with proper measurements, had to get my steel rule out, lol....... got the 12 leds in and running, 10x 2700k clicks, and 2x 6400k osrams, with the panel..... it's lookin beautiful and got the exhaust on 24 hrs now, all working perfect with 12/12 timer.... they are forming a few spots on leaves, so hammering the nute water into them now... they are drinkin 1-2 litre of nute water a day each.... (nute water = Dutch mater gold one grow/flower, 800-1000 ppm 6 PH) 😎 Some details about lights.... i did some maths on it, and included some handy pics..... because i'm using cheap leds, i'm keeping the distance at 25cm, they are leds so they won't burn, and it massively increases the lumens/lux/Par, and with my home built light setup, the leds are spread out enough to keep it lower.... worked out good..... something of note is that all the led globes are built/made in china... however different marketing/selling companies from around the world... and the german osrams are 1w leds ... by far the most superior, but anyone can design and send the requirements to china to build em, haha) it's not a contest, we all work together.... haha.... the person with the best led light globes gets my business, because i want the best for my babies.... :) (let me explain- 1w led vs 0.5 w led, the watt of the led projects the light, lumens, LX/PAR etc much further the higher the watt of the led....my 600w panel has 0.5w leds, the philips has 0.75, the osrams have 1w leds..... ) each globe philips (dutch)- 10.5w internal - 14 leds 0.75w 1055 lumens each globe osram (german)- 10.5w internal - 10 leds 1w 1080 lumens each globe click (cheap)- 9w internal - 16 leds 0.56w 800 lumens light panel - 70w - 600w 30 red - 8 red 12 blue - 8 white 7500k 1 ir - 1 uv = 20x blue 6400k - 38x red 2700k internal - 60 double leds - 120x0.5w 6000 lm
Likes
6
Share
@Lastix
Follow
started the third week by tying the gorilla, on the liberty haze I will do nothing but defoliation. Defoliated the first few leaves to both plants for better aeration. Tied up the gorilla again by cutting it down a little more to let it catch the light better. will most likely have to defoliate a lot more since the leaves are very large and completely cover the secondary branches. added bio bloom and top max to watering and removed root juice. Continued lst procedure on gorilla and defoliation on both. On the liberty in addition to defoliating I have also shortened the leaves to get more light I hope it works without bothering them too much.
Likes
13
Share
Awh crap - I think I’ve pushed it too far 🤣 after topping off 31 tops, the plant responded TERRIBLY this week Leaves are telling me some sort of nutrient issue? Been trying to make up for it in nutrients but honestly I don’t know how much is too much or little? ALSO it’s still in a 1 gallon lmao - any tips?? What could we be seeing here?
Likes
4
Share
Day 15: Watermelon Zkittlez is looking strong. A little discolored but it is early growth and should work itself out. Kind of resembles watermelon rind to me which is quite the coincidence I think. First big feed: 4ml FloraMicro, 6ml FloraGro, 3ml FloraBloom, 2ml CALiMAgic, 1ml RapidStart, 1ml Floralicious Plus and 2.5ml Armor Si. RO water PH 6.0 Temp: 75º RH: 63% PPFD: 450 VPD: .53 kPa Day 16: She's looking about the same with some new leaf growth. I can't tell if she just has funky pigment in her leaves or if there is a deficiency going on. Her leaves look just like watermelon rind! Kind of weird but also maybe genetics. Will leave for now with no adjustments to nutes and see if new growth changes. No water no feed. Temp: 76º RH: 61% PPFD: 475 AVG VPD: .46 kPa Day 17: Happy, healthy, let grow! Applied first LST bend this morning. Should take nicely. Will feed tomorrow. Temp 77º RH: 55 % PPFD: 500 AVG VPD: .6kPa Day 18: Watermelon Zkittlez looks really funky. Something is going on with her but I'm not sure what exactly. There is clear pigmentation issues but again, why? Same nutes as all the other girls who all seem to be thriving. Can't figure it out unless it's genetic. Moved up and turned up the lights. Fed 250ml of 4ml FloraMicro, 6ml FloraGro, 3ml FloraBloom, 1ml RapidStart, 2.5ml ArmorSi, 2ml CALiMAGic and 1ml Floralicious in RO water PH 6.2 PPM: 750 Solution Temp: 69º. Tent Temp: 77º RH: 60% PPFD: 575 VPD: .44 kPa Day 19: Looking good. Tent Temp: 77º RH: 60% PPFD: 550 VPD: .44 kPa Day 20: Still looking good. New growth. Fed another 250ml RO water with 1ml RapidStart PH: 5.7 Tent Temp: 77º RH: 60% PPFD: 550 VPD: .44 kPa Day 21: End of Veg Week 3! Looking strong and healthy so far despite the extremely odd leaf colors. Close inspection shows some sort of deficiency or disease but all other ladies are receiving the same nutes in the same soil and grow conditions. All are very healthy. Has to be a genetic flaw in the bean. Will grow it out to see if it persists or corrects. Almost feeding/watering daily at this point, will up the solution volume and see if it will last a day or two longer. Fed 350ml-400ml of 4ml FloraMicro, 6ml FloraGro, 3ml FloraBloom, 1ml RapidStart, 2.5ml ArmorSi, 2ml CALiMAGic and 1ml Floralicious in RO water PH 6.2 PPM: 750 Solution Temp: 69º. Tent Temp: 77º RH: 60% PPFD: 500-550 AVG VPD: .44 kPa
Likes
8
Share
@Jalfax
Follow
➡️ Bella ragazzi la caramellina cresce e sto cercando di dare una forma circolare anche a lei. ➡️ Tra poco inizierà ad andare in pre fioritura e vedremo cosa ci farà vedere.
Likes
4
Share
09/07 - Reveg still in process - Mother plant in recover from clone clipping - unhealthy clones disposed - cutting new clones this week - Myco and Superthrive feed increased - Net dropped an LST.
Likes
13
Share
Likes
19
Share
Just waiting for the change in development to put these girls in darkness!
Likes
1
Share
Likes
31
Share
@Neo09
Follow
We lost about 40 girls... we are not sure why... humidity, temperature and lamp distance are OK... only what we see, maybe tabs were too close to plant ?!??! 🤷🏻🤷🏻🤷🏻
Likes
3
Share
11. Woche Wir kommen langsam auf die Zielgerade, denke noch 2 Wochen maximal, dann ist sie rdy. Ich werde diese Woche noch normal Düngen und sie dann zur nächsten Woche Spülen werde, damit sie noch ne Woche Nachreifen kann. Sonst bin ich wirklich zufrieden mit ihr 😊😌