06/20/2018 Did some supercropping on #1, Fimmed #4 she showing pre-flowers. ( #1,#2,#3) Not showing pre-flowers. #4 Fimmed because she gets stretchy 2-3 times veg height in my own experience. 06/21/2018 Longest day of the year today,applied potash last week, topdressed with Espoma tomato Tone tomato 🍅 3-4-6 with biotone

There is little to say yet. I recommend everyone to try this technique at least once. Maximize your harvest and increase your personal experience. If you want more serious proof of how mainlining works, take a look at the diaries of @Canamatoes, my teacher and mentor. More updates later, stay high🤘😁🦄

Starting week 3, the ladies look good as far as I can tell 😉 The slight problems in week 2 turned out to be a Cal Mag problem. I have a value of 5.25 to 1 in the irrigation water, I have this value with bitter salt balanced out that a 3 to 1 value is created and also foliar fertilization was carried out, this seems to be good for the ladies. As an information, the Cherry Cola Auto already has a very strong smell so it is not recommended without an activated carbon filter. I hope the aroma becomes even more intense when it blooms 😋 Week 3 Day 6 it appears the Cherry Cola Auto is now in pre-flowering I will adjust the fertilizer next week for pre-flowering. The Gorilla Cookies Auto shows no signs of pre-flowering yet.

26/10:Im Struggling a little bit whit temps,i have to open some cms the tent,but if i do it,RH gonna decrease.im compensating by nebulizing and leaving a cup of water inside + humidifier. im preparing water whit nutrients for later. inorder to fix temp issue,before the night i changed setup whit a spudnik i hope i made the right choice. let's see what happen at 19:00! 27/10: increased ph from 5.5 to 6 and increased ppm from 500 to 600.

🦆**Grow Report by Zuppler - Week 6 Flowering Phase**🏆🏻 Ayo, what’s poppin’, fam? Zuppler back with that Week 6 flowering update, straight from the heat. We hittin’ the late stages of flower, and the girls are still stackin’ up them buds, but I had to make a few adjustments this week. Caught a little leaf burn – nothin’ major, just a sign the nutes were hittin’ too hard. So I dialed it back a bit, gave ‘em a lighter mix to keep things in check. I also switched things up with the feed – swapped out Big Bud for Overdrive. Figured it’s time to really push these girls through the finish line, and Overdrive’s gonna help bring out that extra weight and resin in these last weeks. So far, they’re takin' it well, no stress. The buds are still thickening up nice, and trichs are gettin’ cloudier by the day. The whole grow room’s smellin' loud now, like someone cracked open a stash. Temps and humidity still locked in, keepin' everything balanced while they finish out strong. We’re cruisin’ towards the end, just lettin’ these ladies do their thing. With the nutes adjusted, I’m expecting them to bounce back from that slight burn and finish up real clean. A few more weeks, and we’re lookin’ at a solid harvest. Zuppler out. Almost there, JoeNimbal!

Germinated wiithin 12 hours 2 down 1 more to go! Check out my Cannabis Community, please👇like👇, follow, comment, and subscribe to my YouTube channel👇. ❄️🌱🍻 https://www.youtube.com/@DutchF4rmer Join our discord community for weekly giveaways 👌 (Join the patreon for help advice and mentoring) https://www.patreon.com/DutchFarmer (Discord Server) https://discord.gg/VMu6rH4a7V IG https://www.instagram.com/dutchfarmer1/ It will be appreciated! ❤️ Happy Growing 🌱🌱🌱

Regando solo con agua ya 2 semanas, sin necesidad de lavado el cultivo probiotico me lo permite las flores ya están maduran y se nota una densidad enorme en las special queen y en las green gelato de royal queen seeds

I did not grow these two plants to their potential. Hit with high temps as seedlings and fungus gnats in flower, I decided to harvest them probably 7-9 days too early. Nonetheless, after 4-5 days drying, they've been trimmed and jarred and tested. Smoke is very complex and honestly have never smelled such a strong incense like smoke rolling off the pipe before. Very clear and relaxing so far. Delicious grapey spiced beer flavor. Very white ash. So happy to have a larger lady of this being finished properly right now.

been a great week for cookies shes turning into a nice Bush did some more defoliation and lst removed some lower nodes tried opening her up as much as possible will be dropping silicon and adding buddy next week thanks for reading happy growing guys

The harvest of my dear Stella was supposed to happen on August 4th, but didn’t begin actually until August 9th. I decided to allow her to dry out a bit before beginning the harvest, but I had some other difficulties which made her dry out a whole lot before I ever even got started. You can tell how dry by looking at the pics and video. Luckily, the dryness was limited to her larger leaves. She was already quite dry on the 9th when I started, and was more so by the 12th when I finished. Even after the advanced drying, her wet trimmed weight was still quite a bit. I’ll list the weights all together in a bit. It took 4 days to get the whole plant trimmed, weighed, and hung up for final drying. She was hung up from August 12th till Friday, August 19th. I got busy harvesting another plant while she was hanging up, and just let her be. On August 19th I took all of her branches down and removed the buds to get the true harvest weight of her buds alone. Let’s get to the weight of the whole thing. The overall wet-trimmed weight of the plant was 18.329 ounces with the buds and branches combined. I was a forgetful idiot and forgot to get the weight of the dry buds on the branches before removing the buds. So all we’re left with is the actual harvest weight of the dry buds alone. The overall dry bud weight, or actual “true” harvest weight of the smokable bud is: 7.317 ounces. That’s a wonderful amount of freshly harvested bud to cure. All of the buds were put into 8 quart sized jars filled roughly 3/4 full, and 1 pint sized jar, also 3/4 full. Each jar has a hygrometer as well as 58% bóveda packs to help aid the curing process. This is the 2nd DarkStar plant I’ve harvested, and both were very large plants. I used a scrog method the first time with a net that spread the whole plant out taking up the entire 4x4 area of the tent. This time I wanted to let her grow more naturally. She got so large that I had to bend almost all of her taller branches over using HST methods. I had to bend 3-5 branches over more than once. By doing that, once her buds began to fatten up she got too heavy and needed to be supported just to stand upright. Toward the end she had to literally be tied up to the side of the tent. Stella (DarkStar) was a wonder to grow, and she gave me a good amount of clones that will soon be harvested themselves. It has been a journey with Stella, and I’m happy that the journey is now complete. Happy growing everyone!

Week 5 coming into flower now !!

Day 57- Finally I'm back home, now I can take some good pictures and maybe get helped with those babies. I see that some leafs are yellowish, I don't if they are getting that color because they need more nutrients or if they are because they are old. I would like to get helped here please, I don't know what I'm doing wrong (well it's a little hard for me because I'm 15 days out of house for working) but I want to get those babies beauty and well feeded to get the "best" production, I know that I've committed a lot of errors, and the planta have suffered a lot with the rain and the wind ( typical outdoors problems). For my next grow I will put some plastic or something to get the plants out of the rain, but at the moment they will stay like that, without anything, just sun+rain+wind+nutrients. I have read that is wrong let the plants get the rain on the flowering stage, but here, January is the driest month of the year, so I think that that will be good, because I will have like 30 -35 more days before harvesting ( or that's what I think) Well, thank you so much for read and follow my diary I'll be so grateful if any of you can help me with the problem that I think I have. Happy grow for everyone

Plants harvested about 80 days from seed. Very frosty buds with an intense citrus and blackberry scent. Easy harvesting with little work, buds easy to trim due to their uniform shapes. 604gr of wet buds. are drying for 8 days, first test done and the result is a very funny hybrid, initial sensations of a very sativa plant and then calms down and the symptoms of indica plants arrive, this strain is very well created. citrus and blackberry flavor very pleasant. as soon as they are completely dry I update with the dry weight. 3 Plants, Total of 136gr of dry buds. Love this strain 💚🌱🙏 Good week everyone 🌱🙌

Week 12, pre flowers everywhere! Can’t wait to see how she finishes but for now my job is to try and maintain an even canopy 🙌🏽💚

Loved Ricky’s hash plant so much I got 2 more pack and 1 pack of bubbles

Привет садоводы вегетация продолжается еще 1-2 недели и можно ее переводить на цветение день 42 и я перевел время на цветение

Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Buds keep coming along but not yet bump. 💡I've removed 2 hours this week, in 2 times, 1 hour start week, 1 more hour removed mid week, because I'll have soon some photoperiod in the tent, ⏰️ 20/24 On 💪keep removing some leaves 🍃 💧 Give water each 2/3 day 1.5 l Water + Roots + Zym + Bloom + Green Sensation (1 + 1 + 5 + 1 ml/l) 1.5 l Water + Roots + Zym + Bloom + Green Sensation + Sugar Royal (1 + 1 + 5 + 1 + 1 ml/l) PH @6 💡Mars Hydro - FC 3000 50% 38 cm. Mars Hydro Fan kit Setting 6, don't need more for the moment, no smeel out of the tent. Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Anesia Seeds - Frozen Black Cherry Auto🌲🌲🍒🍒 https://anesiaseeds.com/product/frozen-black-cherry-auto/