Likes
Comments
Share
@Dictator
Follow
I have to dry the buds at 20 degrees in the dark at 50% humidity
Likes
107
Share
💩Holy Crap Growmies We Are Back💩 Entire grow has been stunted by the soil/medium Code Name FBT2309 Well growmies we are at 49 days in and everything is going as good as possible 👌 👉 Well folks shes been a busy girl , making a ton of bud , just hope she chunks up 👌 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈
Likes
9
Share
@Franco123
Follow
this week the plant has grown well I'm being struck by the compactness of the plant which is very close between one internode and another I hope it continues like this and stays nice and compact, or started using the water produced by the dehumidifier which is basic ph 6.4/6.6 and an ec between 0.3 and 0.5 and however not with chlorine or other added things as it is water recovered from the air and allows me an error regime with a higher ec because it is based on a lower ec than the tap water which I used to use after decanting with this I hope I don't have problems but we'll see for now and ok, rating for the performance held this week and a nice 10 ahaha unfortunately for me it's a male I'm right but I don't despair I'll use it to mix it with my don diablo and try to make it stay more compact between one internode and the other, since she has a very compact growth while easing a male.
Likes
8
Share
@Oldwied
Follow
Day 23 The third week of flowering is complete. Most of the height growth is finished. Time for a radical defoliation. The girls look great. Unfortunately, Kush has formed hermaphrodites on the flowers in the shade. I hope that I have removed them all. The lamp will be raised to 100% output in two stages.
Processing
Likes
3
Share
Nothing special this week. Horrible colour to the leaves..
Likes
36
Share
Hey everyone 🤗. Today they were planted in their 11 L pots 😀. Now the root growth can really accelerate. When repotting, a total of 3 g per liter of Green House Powder Feeding Bio Grow was added to the Canna Coco 😊. That's enough for 8-10 weeks :-). I'm curious what they are doing this week and I wish you all a lot of fun with the update :-). Stay healthy and let it grow 🌱🍀 You can buy this Strain at : https://sweetseeds.es/de/sweet-skunk-f1-fast-version/ Type: Sweet Skunk F1 Fast Version ☝️🏼 Genetics: Sweet Skunk Auto (SWS34) X Early Skunk 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Processing
Likes
12
Share
@DD1FORTY8
Follow
**** WEEK 10 **** both hulks shaping up to be some real beasts. just can’t beat good ol sunlight
Likes
300
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Girls keep growing on this last veg week. Down the EC, don't need to much. 💪 Continuing Defoliation, lst, preparing scrog and daily fighting with this big leaves 😅 💧 Give water each 2/3 day And vaporise plant with water + Plagron Roots (1ml/l) 1.5 l Water + Roots + Grow + Zym + Sugar Royal (1 + 4 + 1 + 1 ml/l) PH @6 💡Mars Hydro - FC 3000 43% 43 cm Mars Hydro Fan kit Setting 4 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Fast Buds - Tropicana Cookies FF🌲🌲 https://2fast4buds.com/us/seeds/tropicana-cookies-fast-flowering
Likes
88
Share
Hello growers 🤗 We have more autos from Ganja farmer seeds started today. I sowed them directly into my supercharged coco mix🌱. The hydroponic ebb and flow system I am using this round is new and is called AirCube from growace. If your interested in looking for more info on it here's a link to there website 👇 https://growace.com/?rfsn=7577242.b784c7&utm_ source=refersion&utm_ medium=affiliate&utm_ campaign=7577242.b784c7 💦This will cut out my manual watering and help bring more oxygen to the roots while still maintaining a fully organic grow.
Processing
Likes
10
Share
@Dunk_Junk
Follow
Only 2cm vertical growth this week! But she's bushed out a lot. 💪
Likes
3
Share
The grow of this Bruce Banner was excellent no problems, very good structure and terpene profile, definitely recommend to anyone that loves fruity gassy terps, very keen to see how she smokes up, thanks everyone for stopping by
Processing
Likes
7
Share
Likes
9
Share
Moved these girls into the flower room at the end of this week.🌺 Gave them their first week of bloom nutes. 💉
Likes
29
Share
@Hashy
Follow
Most of this week I was away so the tent was on autopilot. When i got back i was pleased to see all 4 strains where still around the same on development, with this one possibly being the farthest behind but not by much. The wedding cheesecake is the taller of the 2 fastbuds autos. She is starting to throw out some nice colours now. I'm quite confident this one is going to hit my 13 weeks scheduled for it, so not long left. Notes Day 64 nothing away Day 65 autofeed last weeks nutes Day 66 Got back, everything's fine Day 67 manually water Day 68 light strength from 75% to 87% PPFD was 599 Dli was 38.8 now its 692Ppfd 44.8Dli. Day 69 autofeed this weeks nutes Day 70 622Ppfd 40.3Dli Back in a week Take it easy.
Likes
113
Share
@Skunky
Follow
QUESTION: I've been using a 200W LED which is supposed to replace a 400W HPS. She draws actual 200W. Should I now put the wattage used to 200W or 400W ? ? ? ? ? ------------------------ What started as as a 'just for fun' - project turned out to be my longest going grow ever. I cut her down yesterday when it was still 2017. Today it's 2018! HAPPY NEW YEAR!!! For the ones wondering why it took 27 weeks: I started under a very small 50W bulb as it was only a just fun project so she vegged for ages. She would have been way faster if I grew her under normal conditions ;) The wet weight is 384 with the branches still on like in the hanging pictures. I only cut the bigger fan leaves off. Haven't smoked it yet so I just put it to 50/50 sat/ind -> smoke report to be updated... :) _________ After trimming, cutting and drying I got 54 grams on the scale. Well, I'm a bit dissapointed considering the outcome in grams but I think the quality is quite ok this time. Smoke report to follow soon... ;)
Processing
Likes
118
Share
@ghendrix
Follow
Okay guys, now this has been an eventful week. unfortunately, I can now only visit my plants on the weekend as I am sutying in another city and the plants are at my parents house. That has translated to the little tiny brown leaf I found last week turning into 3 - 4 semi-rotten buds. So yes, catterpillars. Little pesky green catterpillars were the ones eating the leafs and the ones that have now caused some bud rot on my autoflowers. To wich I have decided to do an emergency early harvest as you can see in the pictures above. Trichomes were more or less 10 - 20 % cloudy depending on the bud and some buds also had quite a few amber so they cound't have been that far from harvest anyway. I cut off the buds with rot and the buds nearst to them. luckily it was only 1 or 2 big buds on 2 of the 3 autos I have. The remaining auto is the foxtailing one witch I have not yet harvested and am now debating if I should just do it to not risk getting rot over this week I am away or let her ripen more. The process was cutting off the bad parts, discarding and then cutting off the buds with the stem off the plant. I have never harvested before so I dont know if it is useally done this way but anyway. After the early harvest wich I am sure many would frown upon I did something even morecontroversial and washed the buds in water+backing soda, water+hidrogen peroxide, just water rince and hung them to dry with a fan in front of them for about 2.5hrs. Now I'm a newb so I dont know if this works, but I read and saw a few posts and videos of people doing and explaining this process, and also asked outdoor growers of reddit to see if this is actually a thing, and yes it seems a few if not many people wash their outdoor buds in some way or another. I washed hoping that if there are any caterpillars in the buds that would kill or at least debilitate them.. none floated off while i was washing though.. so now im scared there are still some in my buds and will rot while im drying :( i checked each bud individually trying not to break them up but didnt find any caterpiullar. i only found one while washing the leafs I had trimmed off the plant before harvesting the buds. Anyway, I have bought anti caterpillar and anti fungal spray for tthe photoperiod plants wich seem to be doing okay. A part from some white powdery stuff on the leafs, maybe powdery mildew? Anyone know what can be done for PM ? Anyway, as usual, thanks for your support and comments! sorry for the long post hehe Edit: Totally forgot to mention this.. I think the foxtailing auto has gone hermaphrodite and polinated the other plants (?) I found a little dark ball at the bottom of one of the buds I have harvested, I picked it off because I didnt knoe if it was rot.. A SEED CAME OUT! Yeah.. So now Im thinking my plants have been pollinated by the foxtailer? Does this make sense? xD
Likes
6
Share
Day 15 the start of week 3. I have defoliated a couple times. Once before I scrogged, and once after today. I am planning on feeding another round of Gaia Green Power Bloom and All Purpose with worm castings. I have also watered with molasses and recharge. Pheno 1 is my favorite so far. She is the second tallest plant. She is the frostiest so far. Darker leaves and more color. The other 2 are similar in colors. Pheno 2 is the tallest, and pheno 3 is not behind much only a few inches shorter. I also shoved a few small pots in the corner of gorilla gas and another random seed I found on the floor hahaha.
Likes
37
Share
@MrJones
Follow
OSS Ghost Train Power 🔹⊱╮🔹╰⊰🔹 GROW Started 03.10.24 INFORMATION 🔹╰⊰´🔹⊱╮🔹 🌞Environment - Maintaining 80F and 65%Humidity 🌾Training - Nothing this week just letting the seedlings veg out. ⚱️2-Gallon 📊6.2 PH 💧 Feeding - Using Horti Grow 8-11-21, Bloom 5-15-26, Late Bloom 0-24-26, Cal 12-0-0 🌞Medic Grow Smart 8 760 Watts 🕷️ IPM - CannControl from Mammoth and Mosquito Bits as needed 🔹⊱╮🔹╰⊰🔹 PLANT UPDATES 🔹╰⊰´🔹⊱╮🔹 📝 Notes - Starting Dailiy Reduced Volume Fertigations with Hort-Grow @ 3.3 GRMS Per Gal, and Horti-Cal @ 2.5 GRMS Per Gal. 🗓️04.05.24 Today fed with Hort-Grow @ 3.3 GRMS Per Gal, and Horti-Cal @ 2.5 GRMS Per Gal. 🗓️04.06.24 At the beginning of week 2 I defoliated and now today the beginning of Week 3 I pruned and defoliated again, may look harsh but they will recover quickly! 🗓️04.07.24 Maintaining Temps and Humidity 🗓️04.08.24 Starting Dailiy Reduced Volume Fertigations with Hort-Grow @ 3.3 GRMS Per Gal, and Horti-Cal @ 2.5 GRMS Per Gal. 🗓️04.09.24 Fed with Hort-Grow @ 3.3 GRMS Per Gal, and Horti-Cal @ 2.5 GRMS Per Gal. 🗓️04.10.24 Maintaining Temps and Humidity 🗓️04.11.24 Fed with Hort-Grow @ 3.3 GRMS Per Gal, and Horti-Cal @ 2.5 GRMS Per Gal ╰⊰🔹╰⊰´🔹⊱╮🔹╰⊰🔹╰⊰🔹STRAIN INFORMATION🔹⊱╮🔹╰⊰🔹╰⊰🔹╰⊰🔹⊱╮ Powerful West Coast genetics Ghost Train Haze x Pellezino combine to create this exceptional Cali weed strain Ghost Train Power. This exceptional strain exhibits dominant terpenes like Limonene, Linalool, and Terpinolene that produce a tempting citrus, herbal, floral scent with a fruity taste that is a flavor sensation. Ghost Train Power comes from powerhouse parentage and produces extreme levels of THC up to and in excess of 30% and when you consider her substantial production this strain is unprecedented. The potent effects are surreal and intoxicating and the harvests are a treat. Indoors this beauty will reward you with a generous 650 gr m2 of tantalizing frosted bud and outdoors she can produce more than 1 kilo per plant. Ghost Train Power is USA genetics that will live up to its acclaimed reputation and have you coming back for more over and over again.
Processing
Likes
10
Share
They all got topped last week and they responded very well and quickly as you can see...im going to let them grow this week and lollipop a little and maybe top next week.
Likes
9
Share
@Kevs_Best
Follow
Blütewoche 1 – Start | Crimson Clay Clone 🌸 Blütewoche eins beginnt – und der Wechsel ist klar sichtbar. Die Pflanze reagiert sofort auf den Photoperiodenwechsel: Die ersten Stretch-Bewegungen setzen ein, neue Spitzen drücken nach oben und die Struktur richtet sich langsam auf die kommende Blütenphase aus. Dieser Run basiert auf einer ursprünglich gereveggten Mutterpflanze, die aus einem feminisierten Seed von Wizard Trees selektiert wurde. Nachdem der Phänotyp im ersten Run identifiziert wurde, wurde die Pflanze erfolgreich revegged und anschließend als Mutter weitergeführt. Die Vegetationsphase dauerte etwa 2,5 Monate. Während dieser Zeit wurden mehrere neue Mutterpflanzen und Klone gesichert, um die Genetik langfristig zu stabilisieren und zukünftige Runs vorzubereiten. Erst nachdem die nächsten Backups gesichert waren, wurde die ursprüngliche reveggte Mutter schließlich in die Blüte geschickt. Man merkt dieser Pflanze die lange Vegetationsphase deutlich an: Kräftige Verzweigungen, stabile Hauptstämme und viel gespeicherte Energie im gesamten Aufbau. IPM & Pflanzenpflege Während der gesamten Vegetationsphase wurde konsequent nach dem Athena Plan gearbeitet. Stack und IPM wurden regelmäßig zwei bis drei Mal pro Woche angewendet. Aufgrund eines früheren Kontakts mit Spinnmilben wurde das Präventionsprogramm bewusst konsequent gefahren und die Dosierung zwischen minimaler und maximaler Empfehlung gehalten, um stabile Bedingungen zu gewährleisten. Die Pflanze hat sich dementsprechend sehr sichtbar entwickelt – dichtes Blattwerk, kräftige Struktur und eine stabile Gesamtvitalität. Natürlich wurde während der Vegetationsphase die Grow-Formel statt Bloom verwendet. Aktuelles Schema zum Start der Blüte • tägliche morgendliche Bewässerung mit der Standard-Nährlösung • Stack + IPM alle drei Tage • dieses Programm wird voraussichtlich bis maximal Ende Blütewoche drei weitergeführt Gerade während der Stretch-Phase ist das Ziel, die Pflanze weiterhin stabil zu halten, Stress zu minimieren und gleichzeitig ein konsequentes präventives Schädlingsmanagement aufrechtzuerhalten. Gesamtbild – Start Blüte Die Pflanze startet massiv in die Blüte. Kräftiges Blattgrün. Saubere Blattspannung. Stabile Struktur mit viel gespeicherter Energie aus der langen Veg-Phase. Die Grundlage ist gelegt. Jetzt beginnt die Phase, in der Stretch, Budsite-Bildung und genetischer Ausdruck der Crimson Clay Genetik sichtbar werden. Blütewoche 1 hat begonnen. EN – Flower Week 1 | Start Flower week one begins – and the transition is immediately visible. The plant reacts quickly to the photoperiod change: early stretch movement starts, new tops push upward, and the structure begins shifting toward full flowering mode. This run originates from an originally revegged mother plant, selected from a feminized Wizard Trees seed. After identifying the phenotype during the first run, the plant was successfully revegged and maintained as a mother to preserve the genetics. The vegetative phase lasted roughly 2.5 months. During this time several backup mothers and clones were taken, securing the genetic line and preparing for future runs. Only after those backups were established was the original revegged mother moved into the flowering cycle. The extended vegetative phase is clearly visible in the plant’s structure: strong branching, thick main stems and significant stored energy throughout the canopy. IPM & Plant Care Throughout the entire vegetative stage the plant followed the Athena schedule. Stack and IPM were applied two to three times per week. Because of a previous encounter with spider mites, the preventative program was maintained carefully, keeping the dosage between the recommended minimum and maximum range. The plant responded extremely well, developing dense foliage, strong structure and overall healthy vigor. Naturally, during vegetative growth the Grow formula was used instead of Bloom. Current schedule at the start of flower • daily morning irrigation with the standard nutrient solution • Stack + IPM every three days • this program will likely continue until the end of flower week three at most The goal during the stretch phase is to keep the plant stable, minimize stress and maintain consistent preventative pest management. Overall impression – Start of Flower The plant enters flowering with strong momentum. Healthy deep green color. Good leaf tension. Stable structural framework with energy built during the long veg phase. The foundation is set. Now the phase begins where stretch, bud site formation and the full genetic expression of the Crimson Clay phenotype start to appear. Flower week 1 has begun.
Likes
19
Share
@HeavyHead
Follow
First week of flower :) Did some final touches on some LST and a very light de leaf of some shading leaves. Pulling down the room temp slightly and will add some pre flowering nutrients towards the end of this week or early next week.