Veg17, riego 1.3 EC y pH 6.1. Se hizo una muy pequeña defoliación y corte de algunos nodos para empezar a moldear la estructura. Veg18, un par de horas después del LST ya están mostrando la estructura deseada. Veg21, ajuste de LST. Veg22, riego 6.1 pH y EC 1.5.

Привет друзья! Из-за сильной влажности на улице, перенеслась в бокс. Прихватил плесень. так бывает. Пришлось срезать макушку и некоторые шишки. Растение подходит к харву. Через дня 3 буду резать. Всем мира и добра!

Defoliated her Today. She doesn't Look that big anymore.😄 But i think she'll Take the Training good. First i defoliated and after that i have her water and a little Bit of Bio grow and calmag. We'll See how she'll Deal with it. Stay tuned 🤙🏽

Heading towards day 14 now. I saw lots of stretch in the last week, I put up another net , single layer and the plants caught right up to it. Pistils are starting to set in.

Desde el momento uno fue fácil de cultivar, no tuve ningún problema en todo su desarrolló. Como planta supero todas mis expectativas, se encuentran densos y muy pegajosos los cocos. En algunos hay partes de color violeta/lila. Y por ultimo recomiendo mucho cultivar esta genética por lo sencillo que fue cultivarla y sus resultados finales, todo de diez.

This week marks the end of Week 10, and Do-Si-Dos Auto is deep into her final ripening phase. Trichomes have shifted to mostly cloudy with a few ambers starting to show, signaling the early harvest window. Her fade is well underway with noticeable yellowing and some purpling on the fan leaves and bracts — all expected at this stage. She experienced one dryback early in the week that caused temporary leaf droop, but she perked back up quickly after a good watering. Temperatures peaked at 86°F with humidity holding around 45%, keeping the environment within range. Buds are dense, frosty, and continuing to swell. On the final night of Week 10, she was watered with Cal-Mag (1 ml/gal) and the auto-watering base was refilled. Harvest is likely coming within the next week depending on trichome development.

Solo una semana más. Domingo 19 se cosecha... Plantas muy hermosas.

.

Hey everyone :-). The last plants were also placed in the bloom chamber kammer. Everyone has made great progress this week 🙏🏻. There is not much to say about this week, I think videos and pictures say more like words 🙈😎. I wish you all a good start into the week :-) Stay healthy and let it grow 🙏🏻👍

It's been 23 days of flower now and The gals are still loving the fc4800 and their new 8x8 mars hydro grow tent as much as I do👍 leaves are sticking straight up towards the light. Love how easy the zippers are to open and close. Nice and strong and guaranteed to last. It has extra material on the backside of the zipper that helps for light leaksand enough ports and vents for anything you need in it👍. the tsw2000 is still going strong and is also a very good light. Its been going almost nonstop for 6 months and still working the same as when I got it👍. not much heat off both lights but the fc4800 is alot cooler and the heat-sinks work extremely well. I have it daisy chained to the tsw2000 and 1 dimmer controls the other and i don't need to be reaching in too far to dim the other light, it's awesome and I can't wait to buy more lights to daisy 4 together👍. I would recommend this light to everyone that grows with leds and have trouble with temperatures getting too high. Even if you grow with HPS lights I think any mars hydro light is a MUST TRY. I like how heavy both lights are because I know it means they are built soild and strong 💪. Very good sign with the frost they are starting to get thanks to bith mars hydro lights. I can notice more frost under the fc4800 and I'm thinking it's from the UV DIODES they put on the fc4800 👍. 2 days ago they all smelt like my nuken, sweet marshmallows. But now I can smell the monkey dough and gorilla glue and skunk monkey coming through👍. I touched a bud on the gorilla and monkey fingers smelt like fruit loops👍 really pleasant smell. Lingered on my fingers for atleast 30 min. I'm glad mars hydro is under priced compared to some brands and for how popular they are usually companies would charge more. Thanks mars you guys are awesome 🤘🥁🎸. I'm getting a new exhaust fan soon. An 8 inch that will work alot better than my 4 inch lol. Wayyy to small for a 8x8 Grow Tent. Dehumidifier is going almost non stop to try and get the humidity down. I love how both lights on 100% power only raise my temperature 2 or 3 degrees 👍. You can rest your hand on the lights and not much heat comes off them. Obviously there is some heat but for the brightness of the lights and only raising the temp that much is awesome 👌.  And if I wanted to I could remove the driver from the fc4800 and run it on the outside of my tent because the cord is so long but 2 or 3 degrees is barely nothing👍. The girls are starting to bulk up abit now and only 3 weeks of flowering, these lights are awesome 👌.  My last run of monkey dough and gorilla glue didn't start showing alot of crystals until week 4. These were only 2.5 weeks and I started noticing some frost. Next week I will be able to tell more about what these custom bred seeds will be like. I love how the smell is changing now. Didn't want all them to smell like nuken marshmallows lol. It's awesome that I can get right inside the tent to do any work i need👍. Even if I wanted an 4x8 tent. I'd rather this 8x8 because it's so easy to work with the plants and have so much room to move around and massive headroom when I'm in there chillin with the gals🤣🤘. FOR EVERYTHING MARS HYDRO VISIT: Www.mars-hydro.com PROMO CODE: rocknroll Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my shit🤜🤛 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍  Www.mars-hydro.com PROMO CODE: rocknroll Instagram @marshydropenny Track: Ethan Meixsell - Thor's Hammer [Rock] Music promoted by BreakingCopyright Watch: https://youtu.be/o6Gr0xn6U88 Download: https://www.youtube.com/audiolibrary_...

These plants are loving life. Upped the food a bit this week, the dinamed was looking a little hungry. I will snip clones clones tomorrow. Hopefully I will have the flowering setup finished soon so I can move these girls over.

The roots have developed at this point haven’t done any training but topping

21th day flower EC 1,9 mS/cm PH 6,1 26th day EC 2,0 mS/cm PH 6,0

Topped and installed the scrog net this week, they took a bit to recover from topping and also defoliated 48 hours after. Changed out the nutrient solution and upped the nutes. I was hoping for more growth at this point but overall I think I'm only about a week behind. Being my first grow, I didnt know what to expect.

👉The last waiting game is just about at an end. It has mostly cloudy trichomes, with still a few clears. Some ambers are scattered about and are mostly on the sugar leaves. Super frosty, super intoxicating aroma or sweet citrus. The leaves have faded only slightly. I could harvest it today if I had time. I think it may be a couple more days. I am set up and ready to harvest when it feels right. 👉I have been giving it nutrient mixed at the high end of the EC range for the Ripen mix from the General Hydroponics Drain to waste feed schedule. I have given a couple of H20nly irrigations followed by a full strength solution fertigation. The EC spikes in a couple days and the pH drops. One H2Only event gets the run-off and pH back in the target zone. I will continue fertigations till harvest day. Any day now.😎

🌱 30.07. - Day 8: Today marks the start of the second week of growth for my Fastberry plant, which is thriving. Currently, I water it every three days with 350-400 ml, tailored to its needs and the pot size. I'm planning to start fertilizing by the end of this week. I've noticed that I need to be careful not to get the leaves wet during watering, as the leaf color seems to lighten where water droplets touch. To prevent scorching, I've dimmed my lamp to 65%, ensuring gentle care for the young plant. 🌿 🌱 Update 01.08 - Day 10 🚨 Near Disaster with My Fastberry Plant! 🚨 A mishap occurred today when I was setting up yellow sticky traps to ward off pests like fungus gnats. While positioning one near the plant, it accidentally tipped over, tearing off a third of one leaf. 😢 Leaf Condition: The damaged leaf still looks okay. From what I’ve learned, it's best to leave it as long as it remains green. If it begins to yellow and wilt, I'll cut it off. 🍂 General Plant Growth: Overall, the Fastberry plant is doing well. The humidity is stable at around 65%, and the pH is at 7, which I'm currently adjusting to 6 using Biobizz pH Down. 💧 🌱 Update 04.08. - Day 13 The plant is flourishing! Today, I administered its first dose of BioBizz Grow (0.8 ml per liter, pH 6.3) and watered it with 400 ml. I'm relieved to report that the plant with the broken leaf has recovered beautifully! 🌿🌟 🌱 Update 05.08. - Day 14 The second week concludes today, and I'm excited by the rapid growth! 🌱 Considering trying Low-Stress Training (LST) next week, though I'm a bit apprehensive since it's my first grow and I want to avoid errors. 🤞 This Week's Stats: Temperature: 24-27°C 🌡️ Humidity: 55-65% 💧 Soil pH: 6.5 📏 Nutrient Dosage: 0.8ml per liter of water 💧 Lighting: 18/6 schedule, 150W - dimmed to 70%, 60cm distance from plant 💡

The calmag deficiency has improved significantly and the plants are now putting all their energy into the flowers. In the meantime, no new eggs are forming, which makes us very happy :)