THIS IS NOT GELATO: IS MORE ONE HARVEST OF REST OF OTHER PLANT AND OTHER ONE. BECOUSE CONTESTS I CANT CHANGE IT SO, I WILL WRITE SOMETHING LIKE I HAD DO THERE, IN MARK AS BLUECHEESE THE GELATO ONCE I HARVEST SHE. NEXT TIME I WILL DO A DIARY FOR EACH SEED TO AVOID THIS CONFUSIONS. SORRY

Einfach nur wunderschön.

All most time to start flushing I will do a 2 week flush

Today is Day 50 !! We have started flower an they are just looking amazing! We have switched up the nutrients for flower, instead of 1 tsp bloom and 3 tsp of veg , we just swap 3 tsp of bloom and 1 tsp of veg !! Can’t wait to see what these laddies do this week!!

Week 2 I got Pistils showing The New Check out my other Dairies (Gelato Cake & The New) Nutrients (floraflex) are in Grams/gal* Light: HLG Follow my IG @therealterpio for more updates & content! I tend to low feed the first 2 weeks then ramp it up a little later into flower

Cruisin down the highway gotta eat a lot of peaches Ready steady, 2 weeks left to fatten up those buds Gonna give them one last magsulphur feed and then its only water till harvest Keepin it simple yo

Hello everyone! Made the last defoliation .. removed all hopeless branches and buds .. left only those that can develop normally .. as you can see, the color of the buds is already violet-red .. and the smell is pleasantly fruity, sweet))

7/1

This week things have stabilised a bit, my bigger humidifier came on D26, so hopefully that will help slow transpiration a little! Not really much to report, plants are growing okay, one of them is still struggling a bit, they’ve all been topped for the second time. As I have one plant per 4ft sq, I think I might only mainline to 4 mains, haven’t decided yet! Have bought a Torus Hydro PH balancer, will see if that helps with the PH swings going forward 🧐 Happy growing guys!

Howdy, as requested by some fellow followers and growers, I took more media this time, to show the 2 shorter plants and the taller one. Photos have been taken in order to show the plant overall, the details of the colas and related tricomes and then there is a 4K video to better see the situation. I hope that you can like it ^^ Plants kept the same height: (31-31-69cm) = (12-12-27 inches) Temperatures were warm, most of the week above +30° (86F), air was dry and sun was strong. Plants got water early in the morning and in the evening after the sun. Please provide a feedback about the maturation of the plants, this should be the 5th completed flowering week. I am still struggling to understand why this year the plants sucked so much in size, even comparing with other autos I grew One plant has trauma from a bird pulling out the seed's plantling twice and I can understand, but what about the other replaced plant that shares the same height and did not have the same trauma? The only big change that I did this year was to follow this advice from YouTube, they explained since auto-flowering plants have a very short living cycle, to avoid the trauma of transplantation, was better to put the cracked seed directly into the soil of the final growing pot. So I did, because it sounded smart, but results still show a worsening compared to previous years.

7.8.25. 10th week of flower started on 7.7 and harvest is on Sunday 7.13. Can’t wait to finish up this grow and get new going! Buds look good just not enough of them! Thank you for checking out grow have great rest of your grow week! Nutrients to finish up Sweetener- 2.5ml Cal-mag+iron- 2.5ml Ppm- 190 Ph- 6.36

It's slow too slow 😅

Last week of veg for the Fast Version A from super sativa seeds club. We added 1 more biotabs to the soil, we also added some startrex and some silicium Flash!! 1 more week and we flower both, version A and B

🌱 Passion Fruitz #5 — Week 4 | The Underdog Every grow has its own story, and this week the spotlight belongs to the only remaining Passion Fruitz in Folder #5. Originally this project started with two phenotypes, Plant A and Plant B, but sometimes nature has other plans. One seedling didn’t make it through the early stages, leaving this beautiful girl to carry the Passion Fruitz banner on her own. Instead of seeing it as a setback, I decided to embrace it. Every plant deserves its chance to tell its own story. And what a beautiful story she’s already writing. ⸻ Unlike several of her sisters, this phenotype started life at a slower pace. She received exactly the same treatment as every other plant in the room: • 12/12 from seed 🌱 • Same Future of Grow LED intensity and PPFD • Same Plagron Terra feeding schedule • Same watering routine • Same environment • Same temperature and humidity • Same love and attention Yet genetics always have the final word. Some plants explode immediately… Others spend extra time building an exceptional root system before putting all their energy into vegetative growth. Looking at her structure now, I believe she’s doing exactly that. The stem is thickening beautifully, the internodal spacing remains compact, and every new set of leaves arrives larger than the previous one. She isn’t struggling. She’s preparing. ⸻ One detail immediately caught my attention this week. Her leaves are absolutely gorgeous. Wide, symmetrical, deep green, perfectly flat and beautifully formed, giving her an incredibly healthy appearance. Every new leaf unfolds with confidence, showing excellent vigor and no signs of deficiencies or nutrient stress. Sometimes the slower plants end up becoming the strongest ones once flowering begins, and watching this phenotype develop is becoming one of the most interesting parts of the project. ⸻ 🌿 Environment The room continues running exactly as planned. • Temperature: 33°C day / 25°C night • Relative Humidity: 63% • Root Zone Temperature: 21°C • Nutrient Solution: 26°C • pH: 6.1 • EC: 1.35 mS/cm • CO₂: 639 ppm Even with the warmer summer temperatures, the environment remains remarkably stable, allowing every phenotype to express itself under identical conditions. ⸻ 💜 Feeding Schedule This week she received the Plagron Terra program: • Terra Grow — 1.8 ml/L • Power Roots — 1 ml/L • Pure Zym — 1 ml/L • Sugar Royal — 1 ml/L The feeding remains intentionally gentle, encouraging healthy root expansion before increasing nutrient demand later in the cycle. At this stage, patience is far more valuable than pushing nutrients. ⸻ 🌱 Development She currently stands around 25 cm tall. While she’s smaller than some of the other Passion Fruitz phenotypes, her architecture is exactly what I like to see. Compact. Balanced. Healthy. Every node is stacking tightly, giving the impression that once stretch begins she’ll produce a dense, manageable structure that’s perfect for indoor cultivation. Growth has noticeably accelerated over the last few days, making me think she’s beginning to settle into her rhythm. Will she remain the smallest? Maybe. Will she surprise everyone later? Very possibly. That’s one of the reasons I love growing from seed. Every phenotype writes its own story. ⸻ 💚 Final Thoughts Not every champion starts in first place. Some quietly build their foundation while everyone else steals the spotlight. This Passion Fruitz may have started slower than her sisters, but she’s showing every sign of becoming an exceptionally healthy and vigorous plant. Whether she stays compact or suddenly catches up over the coming weeks doesn’t really matter. Right now she’s exactly where she needs to be. Healthy plants don’t need to win races. They just need time. ⸻ As always, thank you to Plagron for the incredible nutrition, Zamnesia for making this amazing project possible, and to everyone following this 12/12-from-seed adventure from the very beginning. Your support, comments, advice and encouragement make this journey even more rewarding. See you all next week, and let’s discover together what this little underdog has planned for us. 🌱💚

Day 2 : Plant is looking nice and healthy , will update pics later , as for today , snow man building with the little man :) Day 3 : ppms sitting at a stable 650 , little dawg is looking awesome, starting to bulk right up!! Day 4 : dawg drank 4 litres of water and 120 ppms overnight , upped ppm to 750. Day 5: This little dawg just keeps on drinking haha... Further stretch and bud sites starting to open up. Day 6: slight defoliation and tightened wires to open the inner branches

https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND THEY WILL REACH FOR THE STARS WITH MARS🤘🤣. So it's been almost a week under the new MARS HYDRO FC4800 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. I think it might be the blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I've owned a gorilla grow tent before and MARS HYDRO TENTS are better. Don't waste the money on a gorilla tent, get a mars and save a couple hundred bucks for your fertilizers and soils👍🤜🤛I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll @marshydropenny Happy growing to all my friends 🤜🤛