Flowering day 74 since time switch to 12/12 h. Hey guys :-) Finally the time has come . The lady was harvested and hung upside down in the dry tent 😍. Before that, she stood in the drying tent in complete darkness for 2 days and the large leaves were removed. The small leaves stay attached during the drying process so that they protect the buds and allow them to dry more slowly and evenly :-) . In the dry tent, the temperature is 18-19.5 degrees and the humidity is 54-58% 👍. In this environment they are now allowed to hang for 10-14 days before they are fine-tuned and trimmed clean by hand. then after trimming they come to ferment for 6-12 weeks in dark jars with bobeda packs 62% to keep the perfect humidity. After a few weeks, the Boveda packs 58% are used so that they can slowly dry out :-) . Of course there is one last update after trimming. Until then, I wish you a lot of fun with the update. Stay healthy and let it grow 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 A thank you for this wonderful strain goes out to Herzog https://instagram.com/herzog030?utm_medium=copy_link and the Exotic Seeds team You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. You can buy this Strain at : https://www.exoticseed.eu/ Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼 MadeInGermany

Week 10 – Day 71 Flower Day 43 ⚠️ Mimosa Evo – Hermie Alert! Unfortunately, some bad news last week: I found a few bananas (nanners) on one of Mimosa Evo’s main colas – a couple were already open 😬 🔍 I immediately removed the affected buds and checked the entire plant thoroughly. So far, only that one cola was affected – nothing new has popped up yet ✅ If you spot anything suspicious in the pictures: feel free to shout! 😅 🤷‍♂️ Cause remains unclear – could be light stress, or maybe just genetics. Still around 2 weeks to go, so I’m keeping a close eye and hoping for the best. 🌿 Current status – Mimosa Evo She still looks stable and healthy overall 🌱 ✅ No new nanners found since the cleanup 🌼 Buds are developing, but noticeably less swollen compared to White Widow I suspect the hermie stress might have diverted energy away from flower production or impacted development.

These girls are blowing up and have filled the 3x3 tent no problem.They are in 3 gal fabric pots so I’m hoping to keep them short as possible with scrog net along with some training and defoliation this week.I can see this grow producing lots of buds and I’m debating on adding a second sf1000 to the tent to give them another 100 watts.

Week 2 Apricot left 4 Strawberry gorilla right 4

The nutrients on here are only for the LA Divas and the mutants, not for the critical. That's still only on 2ml/l growth boom atm. The LA's are coming on beautifully, and starting to get faster and faster. The indoor especially. It seems to be going through a crazy fast growth boom. Preflowers everywhere! The crirical is looking amazing. Please stay tuned for that naughty girl after the harvest of the LA's and mutants. Day 33 40cm L.A Diva Indoor 21cm L.A Diva Outdoor Critical 28 cm. 2 mutants are about 10 cm tall. Probably not worth keeping but I may as well, they're Alive and flowering, and very strong and sturdy. Why not.

July 5 - The girls are still doing awesome. temps are between 21-26. Humidity is 40-50. Still feeding every 24-36 hours with 3L per plant. July 6 - They are doing good. Showing lots of flower sites now. Unfortunately I did not get any pictures today. July 7 - Tons of progress since last week. I don't see any signs of any problems, and still no pests! The smell is getting A lot stronger as it starts to flower more July 8 - Still doing there thing, no problems, temps and humidity is fine. Have been feeding every 24 hours now as they seem to be really thirsty July 9 - Super happy with how they are doing. No issues yet. Smell is heavier, and tons of bud sites showing up. Only issue is they are growing pretty uneven. July 10 - Time to get a even canopy! First time doing some HST. I also did some defoliation. One of the stems split open a bit but it seems to be doing just fine. I did he HST and defoliation in the morning, i then took pictures of 12 hours later and everything seems just fine! July 11 - Everything seems to be a lot more even and the broken stem doesn't seem to affect the growth.

I'm just excited to get my harvest on here! I believe this will be my biggest of the 3 plants. I have it all mostly trimmed. I will dry trim a bit later and weigh. I will try it once it's dry, though it is tempting to smoke a bowl of the hash fur I pulled off everything with tweezers. More photos and a review of Platinum Purple to come. Thanks everyone @GrowDiaries for making this site and to the grow community for the support, encouragement and the wisdom of your experience. Grown from veganic clone from Buds & Roses. Dry in peace, my little buds! Dried in brown paper bags after a half assed wet trim. Dry trimmed after stems snapped and put into a canning jar to cure. Vaped trimmings with popcorn nug. Biggest mistakes of this grow: Not vegging longer Not using a PPM meter and using extremely hard tap water Not starting from seed Not keeping the space cleaner (fur & bugs) Not using individual trellises Not using ventilation besides fans Not using enough fans Best lessons learned: I loved growing weed. Being on this site in a supportive community made it especially fun. Small yeild but when you consider I pay 30-60/8th at the pot store and that this was my first grow and I feel lucky to have made it to harvest , getting a half oz out of one plant is more than fine by me.

This week again had some challenges with power and humidity but we push on. The ladies are getting seriously frosty and start to fatten up. They all looking good but the Lemon Zkittles is most impressive. Also the one pheno of Gorrila Cookies is frosty frosty frosty. But all the plants are looking good and stacking on buds nicely. Looking forward to harvesting in a couple of weeks. Here to hoping no more power or humidity issues, only fat and tasty buds ahead

She just keeps impressing me every day. The buds are getting supper thick. Really starting to pack on some weight it seems. There are plenty of white hairs and getting lots of crystals. Gladly nothing negative to report. Each main bud is about 6 inches long (or deep) by 2 inches wide. All the leaves have a really good deep green, some are getting a little shiny near the top. She looks in great shape and I’m very impressed. Don’t have much time to fuss over her and she just keeps doing her thing! Cheers!

Hi Growmies, Last week for my ladies, going to harvest any day. Not giving any nutrients .Conditions are perfect and 2 weeks no rain are predicted with temps around 18°. Thanks for swinging by .

Jah Bless Loading...

Primera vez aplicando estas tres técnicas al mismo tiempo. Veremos como resulta! Ella parece recuperarse de tal estrés lo más bien. Esperemos que todo siga así. Gracias por leer mi diario!

Fast & Chunky: 460g Wet for the Heat-Resistant Colombian Sativa ​ ​She reached full maturity in just 70 days (10 weeks) instead of the breeder's estimated 15 weeks. When the intense late-summer heatwave hit the tent, her tropical Colombian Sativa heritage allowed her to handle it like a total champ. Instead of panicking or losing density, her metabolism went into overdrive and accelerated the trichome ripening. ​Structurally, she threw a massive curveball: while she kept her native Sativa leaves, her flowers completely leaned into the "touch of Afghan" in her lineage, packing on incredibly dense, chunky Indica-style bud spheres. ​Paradoxically, because she resisted the heat, she ended up looking way more compact and uniform than her Indica-dominant tent mate (which completely stretched out due to the thermal stress). You can see that comparison and the weight difference in my Purple Opium Auto Diary. ​Key Lesson: Sativa-dominant strains are definitely my ultimate choice for summer runs. Getting a clear-headed Colombian daytime buzz from buds this chunky, fast, and heat-resistant is a massive win! 🚀

Que pasa familia, vamos con la septima semana de floración de estas Gorilla Cookies Fast Flowering, de FastBuds. Agradezco a Agrobeta todos los kits obtenidos de ellos 🙏. Hasta aquí veis que llevan buen progreso y el color que se marcan es espectacular. Vamos al lío, el ph se controla en 6.2 , la temperatura la tenemos entre 22/24 grados y la humedad ronda el 50%. El fotoperiodo a 12-12. Estás próximas semanas veremos cómo avanzan. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨

Chopped and now drying

week six flower everything looks great so far :D buds are filling out & terps going crazy!! Gelato 1: smells creamy Gelato 2: smells creamy and sweet a bit like candy I water them with 1.5l every 48h the light I use was set to 100% and it hangs 80cm away from the tops

LSD Zamnesia Tripping 🙂 | Fresh Frozen, Ice Water & Temple Balls — Week 16 From Seed First of all… Yes 😄 We are once again dividing the harvest reports into multiple chapters, and once again we apologize for that. But honestly, there was simply no way to fit: * harvest, * drying, * trimming, * curing, * smoke review, * macro photography, * fresh frozen work, * washing, * extraction, * and hash making… …into a single GrowDiaries update without rushing through important parts of the process. And this part? This part deserved its own spotlight completely. Because this week was not about flower anymore. This week was about resin. Living resin. Fresh frozen material. Ice water extraction. Patience. Cold temperatures. Sticky hands. And slowly transforming trichomes into beautiful hash. For everyone joining only now, quick recap: These LSD girls were grown under 12/12 from seed from the very beginning. Minimal training, mostly natural structure, gentle leaf manipulation, and environmental balance instead of aggressive intervention. Part of the harvest was dried traditionally and already covered in the previous report. But another part… …never got dried at all. Straight during harvest, selected flowers were removed fresh from the plants and immediately vacuum sealed before going directly into the freezer. No drying. No curing. No waiting. Fresh frozen. And that changes everything. The goal here is preservation. When flowers are frozen immediately after harvest, a large portion of the volatile compounds: * terpenes, * flavonoids, * aromatic compounds, * and delicate resin characteristics… …can remain much closer to their living state compared to traditionally dried material. This is why fresh frozen extraction became so respected in modern hash making. It captures a version of the plant that only exists for a very short moment in time. Alive. Wet. Fresh. Fully expressed. And honestly? Opening those frozen bags weeks later felt like reopening harvest day itself 😄 The flowers still looked incredibly resinous even after sitting frozen for weeks waiting for wash day. Now let’s talk process. For the wash itself, we used the Bubbleator machine courtesy of Zamnesia , and honestly huge thanks to them for providing it. They knew I wanted to start exploring ice water extraction properly, and they were kind enough to support the journey. The setup itself is actually beautifully simple. First: ice. Lots of ice 😄 The machine was filled partially with ice first before adding the fresh frozen material inside the working bag. The flowers themselves were placed inside a closed 220-micron washing bag. This is important because the bag keeps the plant material contained while still allowing the trichome heads to separate during agitation. After placing the material inside: * more ice on top, * cold water added, * everything submerged, * and then… …we waited. Around 30 minutes or so. And this step is actually extremely important. A lot of people think washing starts when the machine turns on. But honestly? The wash starts before that. This resting phase allows the frozen material to: * slowly rehydrate, * absorb water again, * become fully saturated, * and most importantly… * become extremely cold throughout the entire plant material. Why does this matter? Because trichomes become brittle at very cold temperatures. The colder everything gets: * the easier the resin heads separate, * the cleaner the release becomes, * and the less physical force is required. That is also why ice exists under and above the material: * lower temperatures evenly, * protect the resin, * and maintain the cold environment throughout the wash. Once the water temperature approached near freezing… …the machine came alive 😄 And honestly? Watching the water slowly transform during the wash is always magical. At first: just ice, water, and flowers. Then slowly: foam, cloudiness, resin separation, and finally that beautiful milky golden water hash makers love seeing appear. Meanwhile on the side, we prepared the filter bags. We did not use every single micron separation individually because honestly sometimes over-separating becomes unnecessary depending on goals and material quality. Instead, we focused on collecting the grades we actually wanted to work with and enjoy. And then came one of the most satisfying parts of the entire process: Collection 😄 Slowly lifting the bags. Watching the resin gather. Carefully scraping. Separating grades. Observing texture and color differences. Beautiful creamy resin everywhere. Some lighter. Some slightly darker. Some sandy. Some greasy. Every layer carrying slightly different characteristics. After collection, the resin was carefully freeze-dried. And this part also requires patience. First freeze drying. Then breaking it apart. Then more drying. Then more waiting 😄 Depending on environment and conditions, full drying can take several days because trapped moisture inside hash is dangerous long term. Rushing this step can ruin months of work later. In this case, the process stretched closer to about a week before everything felt properly stable and ready to work. And honestly… This is where the magic really started. Once dry enough, we allowed the hash to rest briefly before beginning the hand-working process. No extreme heat. No giant pressure. No fancy machinery. Just: room temperature, body warmth, gentle pressure, folding, rolling, stretching, and patience. The room itself stayed around 15°C, which turned out to be perfect for working the resin slowly without overheating it. And this step matters far more than many people realize. When hand-working hash properly: * oils redistribute, * compounds begin merging, * terpenes spread through the material, * oxidation starts slowly, * texture evolves, * and curing begins transforming the resin itself over time. You are not simply “rolling hash.” You are starting a living curing process. And slowly… The texture changed completely. From sandy loose resin… to creamy material… to sticky dough… to smooth beautiful temple balls. Honestly, seeing that transformation happen in your hands never gets old 😄 Final result? Three temple balls total: * two smaller ones from smaller micron collections, * and one large main temple ball that became the true star of the session. Final weight: 46.5 grams.( big one ) And honestly? I was extremely happy with that result. Especially considering the quality, texture, color, and how beautifully this LSD washed overall. Once formed, the temple balls were wrapped carefully in parchment paper before being vacuum sealed for long-term curing. And now? They rest. Months. Maybe longer. Waiting. Because the goal here is not “fresh hash.” The goal is evolution. Traditional temple ball style curing allows: * oils to redistribute, * compounds to merge, * texture to transform, * aroma to deepen, * and the entire resin profile to mature over time. Almost like aging wine. Or curing cheese. Or fermenting traditional products slowly and intentionally. This is medicine with patience built into the process. And honestly… That part alone deserves respect. We also included: * detailed process photos, * collection stages, * macro photography, * texture closeups, * curing progression, * and multiple stacked macro images showing the resin in insane detail. Some of these stacks reached: * 62 frames, * 87 frames, * 114 frames, * and even 152-frame focus stacks. Because honestly, hash under macro magnification becomes another universe completely. The textures stop looking real. Tiny resin mountains. Oil rivers. Micro-crystals. Glossy surfaces. Soft creamy structures. It almost starts looking geological instead of botanical 😄 Mr. Baggy of course supervised the entire operation like the professional resin inspector he clearly believes he is. And next week… The final chapter arrives. Smoke review. Curing review. Flower review. Hash review. Terpene evolution. Effects. Textures. Lessons learned. Mistakes made. And final thoughts after this entire LSD journey from seed to cured medicine. And finally… Thank you. To Zamnesia for the genetics and the Bubbleator. To Plagron. To F.O.G. To all the LEDs, gear, and equipment involved. To GrowDiaries. To the community. To the OG followers. To the new curious visitors. To the silent supporters. To the skeptics. To the lovers and even the haters 😄 To everyone spending time sharing this strange beautiful plant journey with us. Wishing everyone: cold water, sticky fingers, healthy plants, beautiful resin, and enough patience to let good hash become great hash 🌱

They are all showing preflower and chugging along nicely.