Processing
Likes
Comments
Share
@
Follow
Likes
19
Share
Started flush. Mostly white trichs with small amount of amber. Will harvest on Wednesday and hang them up in an open tent. Will wet trim the big leaves and let dry for 7 days then cure for three weeks. If I learned anything from this grow is to defoliate the lower buds more. My canopy was great but I had a lot unusable immature bud. This is my third grow using my A.B.L.E. Grow Chamber and it was the best. Hoping to get about 5 ounces worth of dried bud.
Likes
1
Share
@BaBiL
Follow
We will learn per day better .
Likes
53
Share
@xbrico
Follow
Evening all...back on it AGAIN!!!! Worst is, in the middle of a heat wave (Hottest day every recorded in this part of the world a couple of days in a row!!!)...still need to finish trimming my last crop!!! :'( Will get that done over the next couple of days as these girls need rehoused!!! So, got a cloner at the start of the year...was planning on clone a spare wedding cake I had but that sort of went to pot and life got in the way and that didn't happen. As I also got a hold of an Ultrasonic Mist Generator, I thought I'd give this "Fogponics" Germination thing a go!!! Seeing as @Sweet_Seeds donated a few Magical Beans to my cause, I thought I'd give their genetics a whirl. The Red Hot cookies looked too cool to pass up on!!! So, got the beans popped on the 12th of July and by the Thursday, they were showing their wee heads. One though was also showing its wee tail - I hadn't buried it enough and it popped itself out of the Jiffy Coir plug I started them in. I did get it reburied and it has started growing but you can see its the runt in the pic...intend on keeping this one as a cloner (And will give the cloning a fair whack this time!!!). Since I was worried that the one that popped the soil was going to be impacted, I dropped a 3rd bean and true to form, it was out of the root riot in 4 days also. Got them into the 'fogponics' machine and let them rip (Under 2x11W T5 Sunblaster 6400/k's and a Amazon Special LED light for extra Spectrum) and they seem to be coming on grand. Noticed some yellow spots on the leaves and in 2 minds if it was: A. calcium (As starter plugs are Coir and I didn't put calmag in the plug hydration mix - Jiffy Original plugs are supposed to be buffered for this!!!); B. if I should have broken and washed them out of the Coir and put them into straight Hydroton (The fog could have been saturating the Coir and choking the internal roots a bit) or C. if its just the abusive heat we've been having here (In a country where A/C is basically unheard off as heat doesn't exist outside!!! 😋). Roots are ripping out of the net pots now so they're about as ready for transplant as can be...just wanna give a day or 2 more to see if the heat here settles as I can't adequately cool the area they're going too - but then again, under LED so heat may be good as it doesn't heat the leaf surface up as much! Plus I have a couple of plants to trim...still hanging in their humidor tent when is needed again for growing! Think this will also be the retirement party for the Wilma. Going to build an Undercurrent Fallponics system when this run is done (Wont have time to get it setup before these girls need forever homes!!!). Have the crates bought and a bit of research done on how to DIY a build so hopefully this turns out to be a decent run. Also have a few people with building experience on hand to give advice. Since last grow: Lights have been upgraded to a Geekbeast 630W Pro LED (3500K Spectrum - UV 385nm and Far Red 730nm built in [won't use the 730's as they can't be run independent of the Main Lights...be wary of this if you buy one off Alibaba for the 730's built in!!!] - Will run the 385UV's though throughout the grow for more blue...will run then 3 hours after lights on to until 3hours before lights off). Also procured an InvisibleSun LED 730nm Flower Initiator (Will use this for EOD Far Red treatment to try a 13/11 flower cycle) and a Migro UVB310 fixture - For the Trikes!!! 😝. Have a Haliea 300A winging its way to me as we speak. Have some Non-Stick Micro-tips flying in from the Grand old US of A a will to get a better, more consistent yield. Think thats about all I have for now...Happy Growing all!!! 💪
Likes
Comments
Share
Likes
11
Share
@Mo_Powers
Follow
the last week was really sunny again, which of course pleased the beautiful plant very much. in the last week she only got fertiliser once. biobizz top-max, bloom and grow. 24 hours before the harvest, she was given an ice-cold rinse and a few ice cubes. (does that really help?) the buds have grown very compact and firm. the odour is intense. wet weight at the end was 159 grams. but measured generously. all in all i am very satisfied with the grow. at the beginning she had to fight with the german weather, but she has survived all strains and stress.
Likes
79
Share
@Salokin
Follow
Hello Growmies, Our journey with Epic Buzz by Anesia Seeds, which began with germination on the 20th of January, has quickly progressed to an exciting stage. Just three days into the seedling phase, which started on the 21st of January, the seedlings are already showing promising signs of vigorous growth and health. Each seedling, displaying a lush green hue, stands uniformly in both color and height, indicating a healthy and robust start. Their growth over the past three days has been remarkable, reaching heights between 5.5 and 6.5 cm. This growth spurt is a clear indication of their strong developmental potential. The transition to their next stage of growth was marked by a careful transplantation process. As soon as the first tap roots appeared at the bottom of the easy plugs, we moved them to 1-liter airpots. During this process, we treated the easy plugs with Great White, aiding in their root development. The airpots were prepared with Biobizz Light Mix, providing them with the necessary initial moisture. Since then, we've refrained from additional watering to let them settle into their new environment. Lighting has been a key focus in their care. We've set the light intensity to a gentle 15-20%, which translates to about 150 PPFD. This level ensures that they receive enough light for growth without being overwhelmed, which is crucial at their current seedling stage. In other exciting developments, the Tent X Controller has arrived. Although it's not yet in the same tent as our Epic Buzz seedlings, its presence is a significant addition to our setup. We've shared an unboxing video to showcase its features and setup process. The controller is now operational, tracking data efficiently. Its performance has been flawless, and any queries we've had have been promptly addressed by an incredibly responsive and helpful support team. As we look forward, our focus remains on the seedlings as they continue to establish themselves in their new environment. The Tent X Controller, set up in a different location for now, signifies an upgrade in our overall growing setup. We will continue to closely monitor their progress, making adjustments as necessary to ensure they receive the best possible care. We're also eagerly anticipating integrating the Tent X Controller into their environment in the future. Stay Lifted Salokin
Likes
2
Share
@Autower
Follow
The first line from the right main cola is the banana punch second line with the left main cola is the dos si dos they have a very strong smell looking forward to tasting these no quick drying here so no early testers for me lol.
Processing
Likes
3
Share
Likes
126
Share
Harvest Time of Fast Version B Strain and Welcome to : -Designers Club - Special Thanks to John for hopping through my Messages to Join The SSSC/DP Photo The Project was Supported by Narcos Seeds to give the Strain the Perfect lifespan it could Deserve . Light used for The Contest Grow : Tenty Pro x4 200w in a space of 60x60 Homebox Ambiente Tent. Preparation Before Harvest : 5 Days without Feeding / 2 Days of them Complete in the Dark . Enough Talk from me , just Enjoy youre Seats and be a part of The Designers Club . Good Luck to Everybody and Keep up Growing !
Likes
3
Share
@Trichoma
Follow
@1.5 kPa Partially harvested, waiting a week or mby 2 for the rest to ripen a bit more.
Likes
17
Share
The plants are thriving in their 4th week of flowering, and I couldn’t be happier with their progress! 🌟 Adjusting the nutrient mix for the coco substrate has really paid off, and both plants are responding beautifully. The trichome production is impressive on both, but interestingly, the plant without LST is slightly ahead in development compared to the LST variant. 🌿💨 The buds are forming nicely, and there’s already a noticeable aroma in the grow space. It’s predominantly sweet, with hints of something deeper starting to come through. 🍭✨ So far, everything is looking on track, and I can’t wait to see how they progress in the coming weeks!💚💚💚
Likes
56
Share
I am a little late on updating this week. I left the girls alone for a few days and came back to a jungle. Going to be doing a lot of defoliation over the next couple days. I have cut out the maxigro, silica, and humic/fulvic. I started them on some liquid koolbloom to help build the buds. Twisted helix is a very sad plant. The leaves literally turn upside down like it just wants to die. If I just brush up against the plant is shows signs of major stress. I will give the strain one more chance in the future before I call it a failure. Other than that all the plants are looking happy and packing on some pistils. Just going to keep the juice pumping and the lights beaming.....
Likes
103
Share
Happy day to all of you, Weed friends. And welcome to a new week in the Gardens of Queen Peaky. We have begun to insert a little bit of "Calmag" to support the fertilision program The apical top of the plant behind is stretching too much ... I wouldn't want to have a burning from LEDs ... but now they have invaded every millimeter
Processing
Likes
3
Share
Booommm! Llegó la hora tan esperada Farmers nuestras flores llenas de resina acabandose de formar, la verdad que estas genéticas ayudan mucho al desarollo del cultivo espero que os guste!! Un banco seguro y confiable para una locura de olores y terpenos!!💚
Processing
Likes
10
Share
@TrimQueen
Follow
So, guys.. This is her first month blooming. 4 complete weeks has passed. Here we are for 2 more. Gave Her a super powerful egg shell fert (all powdered - Phosforium Whelthy.) 07/10/20 - We are in the middle of week 5. Thats the way they look like. For me a good number of buds and they are as dense as I thought they would be by this time. I think everything is under control despite some foxtails cuz the heat. Loving the experience.
Likes
2
Share
Super dense already at 36 days of flower full on resin monster ...alot of thricomes ...looks like I found my first mother plant ..definitely running this beast again resin resin resin