Everyone's looking good! Sprayed with em1 amd some regalia and thermx70 yesterday. Added some q, recharge, silicablast and calmag to the res with 3 gallons of water. Otherwise the res has been on autopilot with the dehumidifier reading at 7.1 ph and 30ppm 2 of the inhouse plants are still throwing some sacs but nothing too crazy.

In the last days the buds of this girls are getting bigger and heavier day to day. It's my first grow so I'm very excited to see how they grow up, I love the smell of orange/lime and how many tricomes they have.

She’s frosting up and smelling sweet as , vid captures the lights turning on . Same same next week after a defol

Calibrated pH meter. Was a little reading high. Started tracking runoff for each plant separately. Mex is very brittle. Broke another branch. Still pretty full. Seem to have the base nutrients dialed in. pH is not longer an issue. Growth is still moderate to slow. Holding off on final topping until nodes grow better. Realized I pruned too high and I lost the node I was going to top for. Plants range from about 6” (bw3) to “10 (mex)

She starts to drink a lot now , final week stretch then she goes full flower

Day 69 of flowering and still looking for the elusive Amber trichromes, they are 90% cloudy no amber 10% clear I will patiently wait I want to experience the more indica feel with these last few choice buds. Update Oct 19th 2017. Seen my first amber trich today, as I'm getting older I can't see through my loupe to view resin glands, so my wife showed me how too view them through pictures. All I can say is wow! She was able to zoom right in on them to get a good look. Maybe I will have to get a computer to show these fantastic shots I will uploaded ASAP YOU HAVE got to see them gorgeous girls see ya soon peace and love my brothers.

The cannabis plant is generally growing well and is progressing as expected during the flowering stage. Despite the positive overall growth, brown spots have appeared on some of the leaves and I dont really know what it is. While the appearance of brown spots is concerning, the overall health of the cannabis plant remains good. With careful monitoring and appropriate adjustments, the plant should continue to develop successfully. It will be exciting to see how the plant progresses as it matures, even if its growth rate is somewhat slower than expected.

Welcome to the 1st week of my Anesia seeds - Elementz diary. This one started to rise from the soil yesterday, took some pictures today. Looks nice, planning to wait a bit more before transplantation so the root system can grow bigger.

Woche 5 Die Ladys wurden mittlerweile entlaubt und die gelben Blätter entfernt. Ich achte jetzt mehr drauf den weniger Wasser zu geben, scheinbar ist die Verdunstung nicht so hoch.

Beginning of week.. I went ahead and bumped the TDS to 1000 PPM this week. I don't think I'm going to go much higher than that. Usually don't have to.. Hopefully that's not too much.. I also started adding a bloom booster from Advanced Nutrients called Kushie Kush.. It works great for all strains tho lol. So the runoff is still acting up.. But it is getting better... Slowly. I emailed General Hydroponics on the issue a few days ago and they have not gotten back to me yet... Ugh. But going in: 1000 PPM.. Runoff: 700 PPM.. That was this morning.. Still have not given her plain water yet.. Just been feeding every watering.. Not really any signs of issues right now. A couple leaves are a little yellow (literally 2).. Another couple have some spots (maybe 4 or 5 leaves).. But other than that she is happy, healthy and smelling like a fucking champion! Seriously fucking delicious.. And to think the smell is supposed to warn off predators.. Hah! Good luck with that!!! Barely 8 days of flowering and she is already stacking so fucking nicely! I can't wait to see what kinda magic this gal is gonna do! So happy and excited!!! The light sits about 18 inches from the canopy right now at 100% power. She is still stretching a little but seems like she may be done with that pretty soon.. Maybe even before this week is over. Clones didn't make it.. I think it was too cold. They all sprouted roots but just stopped and they all yellowed out like a mf'r.. Looked like shit so I took them out back Ol' Yeller style and put them out of their misery 😭.. But it's ok.. The mama needs all the focus on her right now! Lol.. Oh yeah.. I went ahead and pulled a couple of the tallest branches down.. Just a tad.. Brought the ties up a node or so on each and pulled it tight.. Spread her out a little but I was nervous of snapping one off so I didnt try to push it too much.. These branches are tough af! Later that day.. General Hydroponics finally got back to me.. They said that I'm an idiot for using FloraKleen during transition like that.. Lol jk.. They did say that I should have NOT done that.. And that my runoff should ALWAYS be lower than it is going in due to the ppant taking up the nutrients.. But that just doesn't seem right to me.. Ive ALWAYS had my runoff higher.. Literally ALWAYS.. but without issues. They said that if the runoff PPM is higher, then there's a problem.. Maybe if I was doing frequent fertigation.. But I'm not.. And never will because that just sounds like a waste of nutrients.. But whatever.. Today I learned that FloraKleen is ONLY for pre-harveat flushing.. Or hydroponic reservoir cleaning in between nutrient changes.. But definately not the way I used it lol.. Thankfully she is still doing good 👍... Buuuut whoops lol Mid week.. Still doing magical things! Lol.. I didn't think she was gonna fill out this tent so nicely! Trichomes are forming nicely.. The purpling is looking amazing also! Some spots on SOME leaves.. But not alot.. Not sure what that is about.. No pests.. No deficiencies as far as I can tell.. Maybe just a mutation? Nothing to worry about tho.. This girl is so fucking gorgeous! I love it!.. Back to feed, water, feed, water, etc. schedule now.. I'm hoping that 1000 PPM isnt going to be too high for her.. But if it is, I will adjust accordingly. End of week.. Seems to me like the stretching has stopped.. So I'm going to cut out the FloraGro.. Double up on the FloraBloom and later into flower I will bump up the Kushie Kush Bloom Booster. She's doing great! Smells fucking amazing! I thought my ETHOS Early Lemon Berry R1 was gonna be the best strain ever.. Then I grew this girlie! Not just a lemony scent.. But like a very sweetened lemonade.. Incredible! Trichomes are EVERYWHERE! Such an awesome, beautiful strain! Good job FastBuds.. Can't wait to try more of your strains! Too bad you wont even acknowledge my grow journal like you do everyone elses.. But whatev.. Lol.. On to the next week!!!...

Let's go I think just 2 more weeks

Transplanted to 5 gallon pots half way through the week and heavily watered/fed for the next 2 days, then topped for the first time yesterday. The 3rd clone didn't make the cut and is now on my windowsill. Next couple of weeks will be about keeping the plants trained and the same height. 2 timelapses this week. Enjoy!

SUNDAY 5/5: Rearranged the gardens..have 17 plants in the 4 x 5 now...yowsa! MONDAY: Plucked some dead leaves and did a trichrome check on her. She's getting close now! Prolly about 70% cloudy and 5% amber! TUESDAY: I observed some white spots on a few leaves here and there, so I sprayed her today with Trifecta Crop Cure, a concoction of a bunch of natural plant oils. I already decreased the humidity in the room to 45% with my new 70L dehumidifier, so I think she'll be fine. I'll spray her again tomorrow and the next day, then I'll have to hope that did the trick, because she is already in the harvest window. WEDNESDAY: I watered her today and included a bunch of terpinator, bud candy, bembe, and cha ching. It was her last dose of any nutes...flushing with spring water from here on out. THURSDAY: Took a couple of photos and tried installing my new Solacure FlowerPower UVB light, but it was dead on arrival.😢..back to the 15.0 reptile UVB lights for now I guess...

Just trying this just to see if you can grow in s household name compost, struggling with nutes as it has nutes for 6 months already in wish me luck 😀🙏

The NYC Diesel’s starting flowering a few days ago. The Northern Lights Auto is about to start and in a couple of days I’m switching the light schedule from 18/6 to 12/12 to kick the White Widow into flowering. I just gave them a 2nd round of Gnatrol treatment and will start with the FloraNova Bloom on the next feeding. I’m still running on 245W CMH and should crank it up to full 315W when I got to 12/12. We’re going through a heat wave so hopefully it should cool down by then.

Niente da dire, stanno crescendo piano piano, questa settimana non aggiungo acqua perché ancora abbastanza, la prossima settimana controlliamo dinuovo, se necessario cambieremo l'acqua e i

This was the final week. I had no choice to harvest early because pm was starting to settle on a lot of stuff in my garden. The UV light worked for like a day or two and it came back. It's just not worth it. It turned a lot of the buds hairs brown and the leaves did suffer a little damage. Part of that was the peroxide solution. I mixed a little too strong, and it didn't seem like it hurt the plants, but after a few days, they showed the damage. It just seem to burn the leaves a little not really the bud so that's good. There was three days of rain coming, so I wanted to get it cut down.I didn't intend on harvesting so early, and I have no place to dry this because other plants drying so I was forced into freezing it. I cut down branches and wet trimmed it into a bin and ran to the freezer every 10 minutes to get it frozen right away. I maybe could've dried it and had some decent flower but I figured this would be a good opportunity to learn about making bubble hash. I decided I wanted a stainless steel mixing vessel and found this beer brewer for a good price. I think it's gonna be solid. It has a nice drain at the bottom. Then I bought some 5 gallon buckets for spacers for my 5 gallon bubble bags I use the heat gun to peel the stickers off and to heat the bottoms up to make it a little easier to cut them out with the utility knife. I used the heat gun again to soften the edges a little bit so I don't damage my bags. I can't do my washes until I'm done trimming my flowers, but I got a 2 Inkbird temperature controllers to bring my studio down to bubble hash temperatures with my ac unit. I could wait a little longer until it gets colder but I'm not sure how cold it's really gonna get and I wanna get this done soon as I can. I'm gonna have to try it without a freeze dryer so that should be fun and I'm not going to micro plane it at all costs. I got 25 µm screens for drying that I will use a towel to wear most of the moisture out then see if it on to some parchment and I should be able to get my studio really cold and dry to get it dried relatively quickly. I'm seeing it recommended to be 30 to 40% humidity and 50° or so for about a week and it should be dry enough to press some rosin. I'm gonna try to separate out the full melt hash, but honestly I think I'm just gonna get a wide spectrum pool on this hash and just press it into rosin to make it easier to deal with. I kind of was trying to find the cheapest bags it's still decent and wasn't paying attention when I bought it really cause there's no 45 µm and my set and I'm saying that to be the lowest recommended the pool but also seeing a lot of people pulling some nice 25 µm so I think with my early harvest I might have some smaller truck head so I might not be a bad thing to have that bag as my lowest. I'm going to catch everything under 160 to 25.

☘️02/05 - Empieza su segunda semana en Etapa de crecimiento. ☘️En el día se hoy esta cumpliendo 27 días de vida en total. ☘️Voy a dejar que esté cinco semanas en etapa de crecimiento para que pueda desarrollarse de forma correcta. ☘️La planta mide 11cm de largo, se encuentra grande y linda. ☘️Hasta el momento no tuve ningún problema. ☘️En estos dias seguire subiendo mas imagenes de como viene su crecimiento. ☘️Si notas algo extraño en las imagenes no dudes en avisarme! Podes seguirme en Insta gram como @bruweed_arg! 🍀🤙🏻

Day 65, 17th of November 2020: Welcome back at the beggining of the 3rd week of flowering. They seem to be stopped streching and now concentrating on buds. All of them are gorgeous..... The 2 Zamnesia genetics Gelato and Kalini Asia are pretty and buds are forming nicely. Kalini Asia might strech a bit more but not long. The Sweet Seed ones are really nice and I am so happy because Red Hot Cookies is already getting red.... pistils and around the leaves.. I hope the same happens to the Red Mandarine and Tropicanna Poison also. They are so gorgeous. They calmed down I don't expect more strech. Fertilization still the same every 2nd day with the ratio and mix above. Some lollipopping (Defoliation) is also done. I removed all the LST the plant remains in the same shape from now. The lamp is on 11.30 min and off 12.30 min. Last week was 15 min longer light cycle.... So every week 15 min shorter light cycle until the 5th week. So far -30 min. It switches on at 6 am and off at 17.30 pm.