Semana 10- Ahora las mas avanzadas solamente agua y a dos mas AK ULTRA le dimos una ultima solución de sales elevando a 6ml x L.

Moving into the last week of Veg. She already is mature enough to move into flower however I'm going to let her veg one more week. The flowering tent is ready for her to move into! Progressing fast & looking strong. 💪😉 Went ahead & moved her into the flowering tent & spread out the tops for the last week of veg growth. She's very happy!

Week four for this beauty! This week, one and half liter of water, a few tweaks to the LST, and, as always, lots of love! It doesn’t seem to have been stressed by the topping. You can see how fast it’s growing. Stay tuned!

Just germinated - waiting to go into pots! 22/04/20 - Germinated 2 Purple Punch seeds - soaked in water with a drop of seaweed. All germinated fine. 24/04/20 - Added to rooters 28/04/20 - Putting them in their starter pots today to see which out of the two is the strongest. Starter medium will be soil - Biobiz light & pro with a tiny amount of worm castings and perlite. i really don't have a clue if this is going to be too hot for them but we'll see. After two weeks we'll see which has rooted out proper and put the winner in it's final home! 😃 Track ID - The Jimi Hendrix Experience - Purple Haze.

Week 2 veg. Starting some LST this week. Pretty new to this so hopefully all goes well!

Week 10 - Fifth Week of Flower The Donutz tent is stepping into its fifth week of flower with some exciting developments and a few surprises. The plants are thriving, and the vibes remain immaculate as the grow progresses. Key Updates: Purple Phenos: 3-4 of the plants are starting to show stunning purple hues in their buds and sugar leaves. The color shift adds a beautiful contrast to the tent and hints at the unique expressions within the Donutz genetics. Different Phenotypes: While most of the plants are stacking up nicely, 1-2 phenos are a bit on the thinner side with less bud density. It’s a reminder of the natural variability in genetics, but there’s still time for them to fill out in the coming weeks. Environment & Care: Stable Conditions: Temperature, watering (reverse osmosis), and overall care are dialed in perfectly. The plants are enjoying a consistent, stress-free environment with plenty of love. Healthy Growth: The rest of the tent is looking strong, with vibrant buds and trichome development continuing to ramp up. Observations: The purple phenos are a standout feature this week, bringing extra visual appeal to the tent. Even the thinner phenos are showing healthy structure and potential to develop further before harvest. Trichome production is increasing, and the tent is starting to radiate that sweet, sticky aroma. Next Steps: Continue monitoring the thinner phenos to ensure they’re getting enough light and nutrients. Maintain stable environmental conditions and nutrient levels to support bud development. Keep a close eye on trichomes as they mature, watching for any signs of ripening as the grow approaches the final stretch. The Donutz are flourishing, and the tent is alive with color, aroma, and promise. The Florida Gang grind is paying off big time — the finish line is in sight!

The girls are hardening up and glazing over with tricombs its looking like all of nine weeks mabe ten before ripe for smoking since she stretched 2 weeks longer than ever before with this strain .finally forming some really nice nugs starting to stink a little has a flower garden sweetness that stinks so good.cant wait yum yum. Found some male parts in popcorn below canopy I got rid of everything below the canopy to keep her female only new pics are 8 weeks and 5 days in flower stil needs to rippen its in full Bloom now so im flushing till she is ready next week or so

Topped again, probably for the final time. Just going to LST the new growth from here on.

1/12/26 4:18AM MONDAY.....💪💪💪💪👌 1/12 CANNAKAN DAY MEDICINAL SLAVERY WOULD MAKE HARVEST A BREEZE!! ABOUT THE LEDS Yes, the **Samsung LM301H EVO diodes** in your Mars Hydro lights (likely an FC-E series like FC-E3000, FC-E4000, or similar) are among the most efficient horticultural LEDs available right now—individual diodes hit **3.14 μmol/J** efficacy, pushing the whole fixture to around **2.85–2.9 μmol/J** PPE (photosynthetic photon efficacy) in manufacturer specs and independent tests. That's top-tier for full-spectrum grow lights, meaning they convert more electrical power into usable plant photons than older diodes or cheaper LEDs. If they "seem more efficient than the PPFD meter says" (your plants thriving at lower wattage/height adjustments), that's actually common and not a contradiction—it's often the **real-world efficiency** shining through once nutes/stress are fixed. Here's why this happens and what your recent wattage drop (a few more watts lower) likely means: ### Why Samsung LM301H EVO Can "Seem" More Efficient Than Raw PPFD Readings Suggest - **High PPE + Uniform Distribution**: These diodes excel at producing photons in the PAR range (400–700nm) with minimal waste (heat/loss). Mars Hydro FC-EVOs achieve strong average PPFD (e.g., 750–1000+ μmol/m²/s in tests at recommended heights/power) with even spread—no hot spots wasting energy. When your nutes were suboptimal (Advanced Nutrients issues), plants couldn't fully use the light (wasted photons → stress, stretch, lower efficiency). Now dialed in (GH powder + aminos + mycos), they convert more of that PPFD into growth—making the light "feel" stronger/more efficient even if meter numbers stay the same or drop slightly. - **Meter Limitations & Calibration**: - Handheld PAR meters (especially cheap/older ones) can under-read full-spectrum LEDs like LM301H EVO (strong white + red enhancement). They often have poor spectral response to the exact mix, reading 10–30% low compared to pro tools (Apogee SQ-500) or calibrated apps. - If you're using an app like Photone (mentioned in your diary), it's generally more accurate for Samsung full-spectrum lights (especially on iPhone; Android varies but often close with diffuser/paper). Many growers report Photone matching or exceeding cheap handhelds on LM301H setups—sometimes showing higher effective PPFD than a basic meter implies. - Bottom line: Your plants are the ultimate meter. Thriving (miraculous growth, no burn/stress) at lower wattage means the effective usable PPFD is higher than a potentially under-reading meter suggests—efficiency win. ### Your Wattage Drop & What It Means Lowering by a few more watts (on top of the earlier ~10% drop) is smart and aligns with the efficiency gains: - Dimming on Mars Hydro FC series is **very linear**—tests show PPFD percentage tracks close to (or slightly above) the dimmer % because diodes run more efficiently at lower currents (less heat/loss). - Example: Dropping from 100% to 90% might only reduce PPFD by ~8–10%, not full 10%, due to that efficiency curve. - Your plants handling it (still "miraculously better") without stretch or pale leaves confirms the sweet spot: likely 450–650 μmol/m²/s veg/late veg range now, with room to push if pistils emerge. - Solar bonus: Every watt saved = less battery drain on cloudy days, cooler tent (less fan/AC draw), and more headroom for extra plants without spiking consumption. **Practical next steps**: - Recheck PPFD (if using Photone/handheld): Average multiple canopy spots at current height/power—aim 450–600 for late veg autos, 600–800 early flower. - Watch response: If nodes stay tight/dark green/no cupping, you can drop another 5% or lower height slightly for denser canopy. - Log kWh if your inverter shows it—track the drop to celebrate the savings. - If meter still "under-says" vs. plant performance, trust the plants more—Samsung EVOs are proven beasts when the rest of the grow is dialed. This is textbook optimization: nute fix → better photon use → lower power for same/better results → solar efficiency skyrockets. You're building a truly lean system. How low are you at now (e.g., 70–75W total?)? Any pistils or new growth explosions today? Keep the momentum—it's paying off big. 🥊🍌👨‍🔬🚨🌞💪💪💪💪💪 1/15/26 12:36AM L-Phenylalanine: https://pubchem.ncbi.nlm.nih.gov/compound/L-Phenylalanine#section=Crystal-Structures That’s your Mars Hydro bar-style LED grow light setup in a compact grow tent (looks like a 2x2 or similar Spider Farmer tent branding on the mylar walls), running super efficiently right now! Breaking down what I see from the photos: • The light is a multi-bar LED fixture (probably from Mars Hydro’s FC series, like FC3000, FC4000, or a smaller EVO variant) with Samsung LM301H (or similar LM301B/H EVO) diodes—these are high-end, efficient chips known for uniform distribution, low heat, and great full-spectrum output (warm white + red/IR boosts for veg/flower). • It’s hung at 19 inches (measured from the light bars to the canopy or sensor plane, with that white dotted line marker). The tent shows a hygrometer/thermometer combo reading 76°F / 53% RH (nice stable veg conditions—cooler side helps prevent stretch). • Your PAR meter app is showing 327 μmol/m²/s PPFD (Photosynthetic Photon Flux Density) at that spot/height—solid reading for where you’re at. • Plants look like young cannabis in veg stage: multiple small pots (fabric or repurposed buckets like Krøger cottage cheese tubs—classic budget move!), healthy green canopy with some colorful accents (maybe early purpling or strain traits), topped or in early training, sitting in coco coir or similar media. • Power draw: ~50W current (from the energy usage screenshot), averaging super low over time (0.48–0.76 kWh daily average). That’s impressively efficient—likely dimmed way down or a lower-wattage model (e.g., 150–300W rated, but running at partial power). Total consumption over 30 days at ~14.5 kWh is pennies on the electric bill. This aligns perfectly with your earlier plan to target ~500 PPFD but getting great results at lower wattage/intensity. Right now at 19” and 327 PPFD: • That’s in the sweet spot for early-mid vegetative stage cannabis (typical recs: 300–600 μmol/m²/s for veg, starting lower ~300–400 for young plants to avoid stress, ramping up as they bush out). • Bar-style lights like this excel at even spread (no hot center like older quantum boards), so your canopy is getting consistent light without bleaching or stretch in spots. • Low power (49.6W) means minimal heat buildup—fans and passive cooling handle it easily, keeping temps/RH dialed (76°F/53% is golden for veg; prevents mold and encourages compact growth). Why it feels “great results at lower than recommended”: • Samsung diodes are top-tier efficient (often 2.8–3.1 μmol/J), so you hit usable PPFD without cranking full power. • Many Mars Hydro FC models recommend 18–24” for veg at 50–75% dim (your 19” fits right in). • Your plants are responding well—lush, no obvious deficiencies/stress, and you’re feeling physically ready to top/fill pots after the delay. To push toward your 500 PPFD goal without overdoing it: • Lower the light a few inches (try 16–18”) incrementally—PPFD scales roughly with the inverse square law, so dropping height boosts intensity noticeably (could jump 20–50% depending on spread). • Or bump dimmer % if it’s not maxed (your 50W draw suggests plenty of headroom). • Retest PPFD at multiple canopy spots for average (center often higher, edges lower in bars). • Watch for tacoing/upward leaf curl (too much light) or stretch (too little). This setup is dialed for low-energy, healthy veg growth—perfect for your “lower wattage wins” approach. Plants are happy, tent’s stable, and you’re crushing it efficiency-wise. If you drop the height or dim up, snap another meter reading/pic—I can help fine-tune further. How old are these ladies (weeks from seed/clone)? Any specific strain notes, or planning to flip to flower soon? Keep the momentum—today’s a win! 🌱💪😂

👉 The plant was a nice dense bush and due to the funky way it leaned over the Queen cola was not the tallest one. It almost filled up the tent (4x4). Such a dense bush that I was afraid I would have a lot of popcorn. I did a fair amount of small branch removal but the plant was prolific and had lots of secondary branches all over. The lean of the plant helped every branch get as much light as it could. I didn't train the plant to be tilted, I couldn't see the trunk because it was a small solid dome of leaves. Everything looked normal at the top. But when it was time to trim the lower leaves that were sitting on the media I saw the main stalk was bent over. I did nothing to straighten it out because the plant was so stout and I could see it wasnt hurting the plant. I dont do any training on my plants. I just let them grow as they please. My goal is just to help the plant to reach its potential. 👉To harvest I did a close wet trim. I started the harvest by clipping the branch closest to the bottom. For each branch I would trim all the fan leaves and worked m way up to the cola at the end of the branch. The larf was trimmed loosely to get rid of the un-frosted leaves, then tossed on the top rack of the dry net. Each branch had a few nice buds on them and those were weighed then put on the second rack of the dry net. I weighed the wet weight of each rack separately. The nice plump cola at the end of each branch was weighed and put on a hanging clip with a letter and the weight cataloged with that number. I repeated this for each branch till I finished with the Queen cola. I hung each cola on a rack. 👉To dry I used an oscillating 42" fan set to lowest speed. After 8 hours I turned the whole rack to help even out the drying process. After another 12 hrs I put each cola on a clip in its own paper bag. I put the buds on the racks in bags as well. I would occasionally weigh each bud and compare it to its starting weigh and my goal was around 25%. I would record each buds weight and then place in a jar would place in a jar with a hygrometer. I would monitor each jar as often as I could and open or close the jar depending on the humidity until it was stable at 62% rh or less. When at the target rh of 62% I would place a 2way moisture control pack in the jar and then placed the jars on the cool, dark closet. 👉The numbers were very surprising to me. The total for the buds on the second rack was 254g. The cola total was 226. Thats 480g of dense frosty goodness. That doesnt include any larf or trim. I didnt weigh the trim but it was a big pile. I made two kief pucks, one pure trichome wafer, and a full puck of scissor hash!

I changed the reservoir and set the pH to around 5.3 and reduced the nutrients by 5ml/g. I just realized I've been adding far far fewer nutrients than I thought. I've been using 30ml in a 5 gal bucket (probably 4.5g volume) but I should be using 30ml/g so 4x as much. I'm going to leave it for now but I should probably start adding more nutrients. I took the wires I was using for LST off the bucket so it isn't stressed during flower and so it's easier to change the water. I'm taking off fan leaves that are blocking bud sites if I can't tuck them away. It grew a crazy amount today, so many little pistils came out. It's an exciting time. July 10 she thirsty. I added half a gallon of water and a full 30ml of each nutrient. That should bring us close to half the recommended nutes. I'll probably change the full res out and give 3/4 nutes sometime this week and go up to full strength next weekend if everything looks OK. https://www.remonutrients.com/calculator/ I just looked at my chart again and I think I was right the first time. I just added more nutrients for no reason. I added another half gallon of water and checked ppm and pH. Ppm is 1050, pH is 5.8. Gonna keep an eye on it through the day and see what happens. 305pm pH 5.8 ppm 1200 July 11 pH 5.8 ppm 1300. I'll add some plain water after the res goes down a bit more. Looks like the plant isn't using all the available nutes and is probably leaching some. She looks good though. Loads of vertical growth over the past week, now really going hard making bud sites. I'm going to see how this nute situation goes before doing any major defoliation or pruning. Leaf temp was 29 on the central cola so I turned up the fans and raised the light a bit. July 12 ppm down to 1200, pH still 5.8. Looks like it's going to be ok. July 13 ppm 1300 pH 6.2. I dropped an entire oscillating fan on my plant today. I broke 4 stems almost clean off. 3 appear to be surviving through duct tape and wire. The biggest one appears to be a casualty. I'm pissed. But the cabinet is coming together. Once it's perfect this kind of thing won't happen. I salvaged a piece of plywood yesterday and hand sawed the whole thing to fit as a door.

Lampa na 50%. 65cm po LST 70cm. Warunki temperatury i wilgotności stabilne. Wydaje mi się ze po LST rośliny stanęły. Zobaczymy jak będzie dalej. Opóźniona panna bez LST.

Day 24. Girl is recovering nice, think to start training her next week. Great light no doubts! Mars TS1000 and daily rotation around axe, plus changing positions every 2 days - helps a lot with even development. Girl is on pure 6.3 ph water, think next time ill go with 1 liter, till then 600 ml every 3 days ... Happy growing !!!

Hello guys, Here I am again to present you a new run, still with the best leds of the market nevertheless as I changed my growing space from 120x120 to 150x150. So I had to update the material inside... I will run with 3 EVO 5-150 lamps of 320W or 960W with Bluetooth dimmers. For the Hydro system, it will be the V-SYSTEM from Alienhydroponics. In fertilizers I am always with Advanced Nutrients. I work with osmosis water. Currently, 4 clones took on 4. Once the roots are ready, I will transfer the cuttings from the propagator to the V-SYSTEM. ------------------------ since the 16/08, when I transplanted the plants in the RDWC system, I noticed some points that I will mention below and correct next time. 1. The cuttings are too small, allow enough time so that I can completely fill my pots with clay balls. 2. Cut out the bottom of the pots from the cuttings. 3. 3/4 of the cuttings are touching the water, so one is late. Next time when transplanting, add more water, up to the basket in order to immerse all the plants and not to create a difference between each one, consequence now I have 3 that are ready to explode and one that will struggle behind, problem corrected today by increasing the volume of water. 4. The b-52 is a real pain in the ass in RDWC, you have to clean the 2 filters almost every day, with this new soup I'm testing without and I think I'll continue like this just with the base sensi grow A and B, as I use Root rot X, I won't use voodoo juice since all the bacteria would be killed. 5. Use of Voodoo Juice is useless if using Root Rot X which will kill the bacteria. I don't know why but when I transplanted in the RDWC, I put my set up in growth mode, except that the plants were not ready for it, moreover, I made a FIM on each. So I lost some days, these last days I went back to a ppdf of 150, now that my roots touch the water, I declare growth 0 on 22/08, I will do between 21 and 28 days of growth. And as my roots are doing well and touching the water I'll go to a PPFD of 300 ++

Day 16 Full Bloom mode,im really stummes how she will Look at the end

Hands down she has raced to be the first plant that will be harvested, which I do not mind because this cheese scent she has is driving me crazy, my senses are drooling 🤤 and crying, patience is a skill reserved for the brave. Love how the LST has given me about 3 main stems, the crystallisation on this plant is incredible, it looks like I am growing it in an indoor environment. All she’s doing is fattening her buds, I hope she gives about 50grams of dry bud. I need to start formulating a questionnaire, I am going to dedicate 10grams to researching how well I grow bud, that is six strains, 10grams each, that is about 60 joints weighing a gram each. At the end I want to open my own community weed forum.

Week 1 of the flower/transition is in the books and so far, so good. After chopping out all but the best branches from each plant we flipped the light cycle and dropped some more clones in to the aerocloner. I am so done with this run of genetics but still can’t deny quality cuts when they’re available. Again, if there was a run to test out this new system with it’s definitely this one. We’ve been plagued by calmag, nute burn, nute def. across all of em at some point over the last 8 months. But since incorporating the Druid nutes - all of Em have been perfect👌. This should be a prefect opportunity to see exactly what kind of buds each of these strains throws out👍. Background This ones tied to part 2 of the pollen chuck. They were supposed to be a clone run for pollination but the mothers all reveg’d due to a timer incident and high stupidity. These will be the inaugural flowering run of the revamped dutchy system. Growing made easy😉. Shit ton of finagling and setup but once she’s ready - sit back, relax and watch em grow😍😎. Thanks for take’n a look.

This plant plus one more started to wilt earlier on in the week, I figured it was probably time to transplant seeing as they had been in the solo cups for 2 weeks. After transplant plants seemed to be happy again. I introduced amino acids this week as well. They are getting the grease spray and drench program

Week 21 - It's a JUNGLE! I'm back and OMG! She's so big! Not only tall.... but... ROUND! I couldnt fit her into a picture, so did a video instead. Wow! She is really something! My Gardena autmatic AI watering system is working wonders. Fed her some nutrients today but I'm not sure I want her to grow more. The colas are taking shape, the buds are beginning to swell. Can't wait to taste these nugs