We zijn in week 8 🤘 Ze heeft het naar haar zin ondanks dat de luchtvochtigheid iets aan de hoge kant is. Ze groeit lekker door en de bloemen worden dikker en dikker. Ben begonnen met het geven van green sensation en een beetje calmag. Laten we kijken hoe ze zich deze week ontwikkeld. Ik zal gedurende de week nog verse foto's updaten dus hou het in de gaten 🧐

It has been another slow week for growth. I've been working to optimize the environment. This is my first indoor grow in Europe during winter and with this equipment. There are a lot of variables that I have to figure out. I've added an oil heater on a temperature controller and have been gradually raising temps over the last few days. I also think I underestimated how much moisture my soil mix retains and maybe I've had humidity in the tent a bit too high. Both seedlings look a bit waterlogged. To try and fix this I'll keep RH at 50% for the next few days and let the soil get properly dry before watering again. Hopefully this gets things back on track and there's some strong growth this week! 💪

This is a super strain no hesitation go get this one you won't regret

So it’s been hot and dry storm came throw didn’t seem bother any of the feed some blood meal and bone mean and the same stuff I use lee do it smell o so sweet can’t wait

i have to give space to veg photo plants .. so, mac1 have to shrink alittle bit

Semana 2 de floração e estão respondendo bem pela aparencia!ate o momento não apresentou nada de deficiência ou over!tive que levá-las a um novo lugar por motivos maiores!e agora ja estão na cabine de cultivo indoor novamente! Algumas delas apresentou bananas de macho pela genetica da mãe que tb apresentou e floriu normalmente depois que tirei fora os sacos de pólen!espero que consiga o mesmo resultado dos cultivo anteriores!por enquanto é isso e proxima semana tem mais!boas colheitas!

Hello y'all 👋 Obviously this one is chopped and hanging out by her toes 😎🔥❄️ she is a beauty even upside down There are only a few left to harvest. I am working on them as they get ripe and I will continue to do the defoliation on them to prepare them for the chop ?🌴 Thanks so much for visiting the growroom...Cyrus PS: again I apologize for missing last week's update and now being late this week. I'm starting to feel a bit better but need surgery in hopes to fix the problem

Day 29 29/07/24 Monday Nice feeding today with De-chlorinated tap water pH 6. Gave her 300 ml and she had a small run off. Getting chunky in the stem now 💪💚 Day 31 31/07/24 Wednesday De-chlorinated water pH 6 today with Plagron pk13-14 5ml to 5L Plagron power buds 5ml to 5L Used 300ml of the 5L solution. I will be using these on water days from now on as they are advised to be used every irrigation. We'll see how they perform 💪💚 Day 32 01/08/24 Thursday Another feed today using de-chlorinated tap water pH 6, there now taking 300ml every evening. Day 35 04/08/24 Sunday END OF WEEK 😁 De-chlorinated tap water pH 6 today with Plagron products. 300ml each. Had a issue with leaf invaders this week, I have treated and am checking every 48 hrs so far seems ok and not progressive. All plants look great, very healthy, one of the Overdose is way behind and due to space maybe culled at flower I'll see how she gets on.

Today is day 47, and I am more than happy with the progress the girls have made! After another week of minimal input due to being out of town, they were a little stressed but I got a good trim/lst session in yesterday which seems to have helped. Hopefully I will be able to give them the love they deserve from now on, but they seem to be doing well despite the lack of attention.

Alle Pflanzen wurden getoppt

Esta planta solo tiene 1 semana en floración y esa misna semana paso de una maceta de 5 litros ah una de 20 litros...

Day 56 ladies are really starting to get some massive buds, tent smells amazing! I can’t wait to see what this harvest looks like😍😍 Thanks for following & make sure to check back for daily updates friends! Happy growing✌️🏼🌱

Temps and humidity are getting up there and harder to control. Equipment is working harder to keep cool. Heatwave forecasted for next week:( Got old lights switched out for new Mars TS series:) Ladies might need to be watered everyday soon as they are taking a lot more every other day. Don’t want them to dry out to much. Added some mulch to help with the top layer from drying right out between waterings. Want to keep the top alive and not die off as the sides of the pot also dry up and really only the centre stays healthy between waterings. That’s why I have now decided in future grows that I’ll being going with large pots, like 30-45 gallon and fewer plants, maybe 1-2 and grow longer for bigger roots!

The plants are really starting to frost up, definitely starting to smell. I’ve got my carbon filter running to keep the house from wreaking.

Hey folks, I'm finally back at it again. It took me a while for a couple of reasons: 1) I usually only grow in the winter. 2) I completely revamped my grow room after the issues I ran into with the last setup. 3) It took me a while to brainstorm exactly what I wanted to do. I bought these seeds from D.C. Seeds and was very pleased with the experience. I'm very happy to give business to a fellow American and Veteran. I've only ever purchased seeds from the UK in the past and that experience has been "dodgy" to say the least (not the vendors fault, but the transit). I've only ever grown photo's, but chose to go with all auto's moving forward. After calculating the intensity of my current light, with it being on a 20/4 rotation I'm very close to hitting 40 moles per day, at least directly under the light. It doesn't quite cover my 2' x 5' trellis. I'll eventually upgrade my light, but auto's should get me the best bang for my buck with this light. Also, I spent a pretty penny building this new grow room. The other obvious reason for growing auto's is their shorter seed to harvest time. I've got a small grow area, and never plan on expanding. Theoretically, auto's will allow me to produce the most out of my room. A few things about my grow room: 1) I lined the whole closet with 1/2" plywood and put that piece of ply the air intake/outtake/power as the divider between each side of the closet 2) The grow room itself has ply on all wall surfaces so I could mount stuff to it and paint it 3) The other side of the closet is my storage/prep/power distribution/etc. area. Maybe I'll take a pic one of these days 4) My last grow my carbon filter/fan was venting into the other side of the closet. This created a headache for a number of reasons. I tapped a 4" hole through the floor and am now venting into my crawl space below the house. 5) I moved to bubbleponics to speed up my grows even more. I will be removing the drip system once the roots hit the water in the res. 6) The larger res. will hopefully make my life much easier. Late in the last grow I could only fit 3 gallons of water in the bucket and that sucker was pounding down at least a gallon a day. That required too much micro-managing for me (both ph and refills). 7) I no longer have a fixed trellis with chicken wire. The trellis is held in place by dowels that I can pull out by hand. The short sides of the trellis have hinges on the bottom, so I can fold it and pull it out easy-mode. Lastly, I'll be using string for the trellis so come harvest all I have to do is cut the string instead of dealing with trying not to destroy buds pulling them through chicken wire (it takes forever). 8) I built a light diffuser on the other side of the air intake 9) My res. is on a motorcycle lift I'm using a drill to move up and down I have now started using Jack's as my primary nutes. They tell you the full break-down of each macro and micro nute, giving me more control and understanding. I think House & Garden is a good product, but when stuff goes bad it's more difficult to troubleshoot when you have no idea what each piece of their full lineup contains. I'm assuming it's kind of a proprietary type thing, which I understand, but knowledge is power. I am still using their Drip Clean (while the bubbler is going) and Roots Excelurator Silver, both excellent products. I'm still using Hydroguard, and will FOREVER. I'm a true believer now of why Hydroguard is necessary for any hydro application, IMO. I also purchased water soluble fulvic acid, but have decided not to use it for this grow....or at least while the bubbler is going (I'll elaborate below). Ok...now that all that is out of the way.... I really wanted to use my well water instead of R/O to make my life easier. Soooo....I filled up my res., and put two seeds in the system immediately. Nothing happened after 1 1/2 weeks. I finally opened up the cubes and saw that the beans had popped, but it looked like maybe I drowned them, or they ddin't grow straight up or something. For round two, I didn't change the water out, and decided to soak the beans for 24 hours in R/O water first. I had the exact same problem. I'm still not really sure what happend, but I suspect it was the well water. My PPMs were sitting at ~500 with the well water, which was probably too spicy for the beans just starting. Also, my well water is questionable (even though it's at 165ppm), but I won't elaborate further....it's a long ass story and I've spent an absurd amount of money on it. Lastly, I did put the Fulvic acid in, and it was very messy. I really want to avoid having to clean my res. Once the roots get big it will be a real pain in the ass to clean. I'm leaning towards not using the Fulvic acid this grow just to see how things go. I had 10 beans total of the Sour Apple and have already ruined 4. So here's hoping third times the charm. So, I went back to my tried and true method: 0) R/O water for everything. Ditching the well water idea. 1) Soak beans in R/O water for 24 hours 2) Paper towel method between plates on a heating mat 3) Once the roots pop, I place them pointed down in the hole of the rockwool cube 4) Hand water once a day by dipping the cube in the pre-mix of 1/4 strength Jack's and everything else I've listed above. This put my PPMs at 300...a way more reasonable value for starts. It's been exactly 7 days since I followed the above. It's probably hard to see but the cotyledons came up, and multiple roots have come out the bottom of the cubes....way faster than I've ever seen since I started growing. That means even though I'm doing my old process this already shaved at least a week off of when I'd normally put it in my bucket in the past.

Preflower! Yesterday i did some lollypopping and final LST on the HerzOG's, i will let them do the stretch now and stop all LST so they can regain some height and strength before flower really sets in. It has been two weeks since i last added BioEnhancer so i added that for todays watering. I water them more or less every three days now with 1.1 - 1.2L pH'd water, i started with 900ml after i transplanted them to their final 11L pots. I'm feeling pretty good about this grow, cant wait for them to grow some fat nugs 😏😁 🙌

soo little update : the 2 plants on the right side are probably not Jelly Pie #7 but rather Original Clon from Blimburn... there was a mistake when I got the cuttings. On the other hand the 2 plants on the left, I'm totally sure that they are so strong smelling and so pretty

This week everything remains stable with no significant changes. The plant continues developing well, so I’m just maintaining the current conditions and letting her do her thing 🌸💪

More crop ..more top .. To be contiued... Intrusa si chiama pinepple expres barneyfarm bye Edopurplekush