Likes
9
Share
Another beautiful pheno of the big jeff by Gecko seeds which is the cross of: Cookies kush X Casey Jones, the plant is showing beautiful indica hybrid characteristics, it's gonna be a wonder plant for sure! Let's keep on working!! 💛💚❤️👨‍🌾
Likes
76
Share
Update Blütetag 45 Hey Leute, hier mal neue Bilder für euch! Leider sehen die Pflanzen langsam alle bisschen abgerockt aus, aber die Blüten find ich ganz ok. Hab die Woche nur Wasser gegeben und davon auch sehr wenig, hab mir n Messgerät zugelegt und würde mal behaupten ich hatte sie überwässert (Stony hatte mich noch davor gewarnt). Sonst ist nicht viel passiert ausser dass die Mädels heute nochmal einmalig meinen neuen Zaubertrunk probieren durften, dann weiss ich schonmal für den nächsten run ob das in Kombination so passt. Schönes Wochenende euch allen! 🤠💚
Likes
99
Share
@Natrona
Follow
2025 Plagron / Zamnesia Eternity Grow Runtz Auto Week 11 Flower 7 Runtz Automatic is in her last week; March 17 had her wet trim and was put in the dark for 2 days before getting the chop on March 20. Runtz fade and nutrient usage apparent in the leaves combined with a check of her trichomes were an indication of readiness. The older pistils are turning orange brown and water consumption is slowing down. Many leaves were fully yellow and fell off when I touched them. Her leaves look pretty with lime greens, pinky purples in the bud formation. The buds are dense and covered in trichomes supported nicely with her stems. Through the microscope, the trichomes are mostly milky with some amber as well. She was harvested on day 74 from germination. As part of the flushing process, I topped the pot with ice, then watered with ph 6.5-6.7 water for 3 days. Then I put Runtz Auto in the dark for 2 days still in her pot. She will hang to dry in a darkened room. Temps are 71-72and 50% humidity. This week the gals were fed on March 17 & 19. Pics were taken on the 17th. Bloom Juice 120 ml Royal Rush 0 ml Power bud 15 ml Green sensation 15ml Cal Mag 20ml Recharge 5ml Ppm ranged from 676-777 Ph 6.5 Temp 68 Your likes and comments are appreciated. Thanks for stopping by. Growers love 💚🌿 💫Natrona💫
Likes
24
Share
Plants started getting real bushy a couple of days after topping. Low Stress Trained all the plants at the end of the week by tying them down using rubber coated garden wire to spread out the newly grown tops. Also spaced out each plant evenly on the tray and turned on the other 2 PB2000 LED lights I had ready to go.
Processing
Likes
14
Share
So, this is my first grow, just starting out. After NJ passed recreational weed, I was like you know what... Went on an amazon spending spree and got some seeds from cropkingseeds and this is it! I let the seeds soak for 18hr in deer park spring water w/ 1 drop of Organic Liquid Seaweed and Kelp Fertilizer Supplement by Bloom City. At the end of soakage, it didn't look like any had cracked maybe one did not so sure. So I did up the papertowels according to the video and have to say I feel a little nervous/anxious that there is too much water/weight on the seeds and feer drownage. I'm going to keep it on there though. I check the towels a few times throughout the day and am surprised they're very moist throughout the day and next morning still somewhat damp. 24 hours in the towels I check my babies and one had cracked but the rest were still sealed up tight, unwilling to share the goodness that we all so desire, cmon babies crack that shell for papa! 11/12 looked like 1 seed popped, yay! I remoistened towels a bit but didn't wanna soak them. I also put some rapid rooters in water to soak overnight gunna throw the seeds in them in AM... I was going to do it tonight but figured I should wait see if some pop out more. 11/13 OMG upon checking seeds at 07:10 I found the papertowels like bone dry OMG WTF!!! Panic sets in but I just set up the little terrarium with 6 plugs and put the seeds in and tore some plugs off bottom of a plug to cover seedhole with. 11/14 Got a sprout! YES!! The plugs look nice and moist just going to let it go! 11/15 Woke up this mornin, saw a new sprout peeking thru and then another about to! I got ansy and took off the little top plugs and found all the sprouts were coming up! Leaving the top plug off, hopefully thats not a bad idea.
Likes
9
Share
We are happy of the results, but in the next batch we will be put 8 plantas and AC
Likes
57
Share
**EDIT** just an FYI... SmokieMcPot wants NOTHING to do with Seedsman!! Appreciate the response I got from them after replying to one of their spam mailers in dm... lets me know everything I need to know about their company... I'll continue to plug breeders/vendors that I feel deserve the advertising. I won't EVER plug a Seedsman bean! How time flies... Start of week 6 is it?? I feel I've put these girls a week behind, but then again I'm sure they'll bounce back just as hard as they have already. I just keep stressing these bitches out 🤣. so far have ive topped both, supercropped TF out of em (should have tied em down again too), swazz'd (to an autoflower point I guess)... what else can I do to hurt these girls feelings?? I can tell anyone that actually reads all of this I am going to drill their main right before harvest with the 48hr dark period.. Just put the net in today to keep a hold of em for now. Have another to use for when they need support. I plan on scooting this one up a bit as it stretches and branch them out some more. These branches are pretty stick like, so no more bendy bendy to those or snappy snap will occur. Day 35- nothing special that hasn't been mentioned already. Running the GHE wk 1 bloom feed at full strength (1237ppm total). Will continue to adjust strength depending on how much TDS drops in 12/24hrs. May update later with a vid to show how thick the main is. BTW I forgot to set timelapse for day 34, so the carnage and immediate aftermath won't be added to the week unfortunately. Day 36- i accidently farted while working in the closet tonight... i think i may have to burn everything in there now and start from scratch.. it was THAT bad!.. i dont think a million apologies will make up for making these girls inhale THAT, nor flush it out of their systems. damnit!! Day 37- woke up to a puddle in the catch tray!!! couldn't find it so i ripped out the net. didnt really want it in there yet, but was helping with a few branches. ended up being the silicon light protector pad in the back directing splash from the dripper next to it right out a LST hole i drilled in the bucket. easy fix.. RES change tonight. same week 1 bloom medium strength since its the same as week 2 formulation. ended up being 1327 after PH corrections. water started off 300ppm calmag and started using hydroguard again since the h2o2 did the trick a while back and we're in the clear. plants looking awesome, and have another 19 days before another major defol. uploading vid of a new system im working on as a teaser for the next grow... its far from finished... but the final product will be showcased later on. Bigger version of this waterfarm and its upgrades. Plus something a buddy wants me to try, but I'm waiting on the plated titanium mesh to show from China to finish that piece and bring it to show and tell for everyone to see. Day 38- PM RES change due to TDS drop from 1327 to 902 in 24hr. WG starting her droop letting me know. She sure does pump right after a fresh change. Must have went light on my measurements cause I ended up in the 1100's. As long as the ratio is right, that's what matters. I don't know exactly WHAT they're eating, just that they are. Adding anything could risk a lockout. Looks like WG is trying to tell me to back off on the Nitrogen?? Maybe dialing it back a bit on accident worked out for the best.. Mild defol tonight to open up those bud sites. supercropped a few more fresh stretch limbs on GC. Day 39- selective leaf plucking tonight. Bare minimum to keep things opened up. RES change later in their day, tomorrow for me. Will be lowering the nitrogen a hair since 2 or 3 of WG leaves are curled downward at the tip. Will update with the breakdown after the fact. Day 40- WG has been looking hungry since yesterday. Don't blame her cause RES is down from 1100's to mid 7's. Even with topping off with 300ppm calmag'd water around 2.5L a day now. Changed RES before they woke from their nap. Modified week 2 transition GHE "medium". Breakdown as follows: 2 gal calmag'd water - 300ppm Micro - 11.6mL Grow - 11mL Bloom - 14mL RES totals after PH corrections - 1253 @ 5.54. Day 41- WG looking hungry again... RES was already down 200 from its change not even 12hrs ago and down 1.5L. top off, PH adjust. changed RES during their night, right before "sun rise". same modified formula as yesterday. need to bump it up so EC doesnt drop as fast. GC need to pick up the pace, cause i dont want WG getting full on amber by the time GC is done. random plucks here and there to keep things kinda opened up without taking off too much ATM. few leaves on GC showing small brown spots, calmag def?? hmm.. already using 5mL per gallon to get to 300ppm.. *edit* looks like the start of a calcium deficiency. Odd, cause I'm adding 5ml/gal now as per the bottle. Raises ppm from 80 to 300. How much is too much?? Going to try 7mL per gal for a few days and see if we can nip this in the butt. As always. Thanks for stopping by to check out my current grow. If it's you're first time here, check out previous weeks for their daily updates.
Likes
1
Share
Piante molto compatte con come ed infiorescenze molto dure,pesanti ed appiccicose e colorate! Facile da essiccare e resistente a muffe e parassite, buonissima al massimo tra le varietà kush penso sia la migliore! Effetto molto rilassante e duraturo. È semplicemente bellissima e colorata e buonissima, credo che ogni coltivatore deve avere questa perla colorata sempre!
Likes
17
Share
@BlaKX
Follow
Aloah Growmies wir sind am Ende der Reise angekommen;) Freitag gab es letzte mal Dünger , Samstag und Sonntag nur Leitungswasser und seitdem austrocknen lassen bis heute. Die Harz Produktion hat sichtbar zugenommen das die Buds weiß glitzern und funkeln. Die Buds sind fest und Kompakt und verströmen ein Tropicana Diesel Haze Aroma das ich persönlich so noch nicht gerochen habe . Trichomen gecheckt und sie sind für mich genau richtig und rdy to harvest:)
Likes
Comments
Share
@Batista
Follow
This week the humidity and temperature are better now than last week. We flushed and the water at pH 6.6. The flowers have also gained weight and the trichomes are becoming cloudy and it is already possible to find some amber. In the mornings we are trying to let her receive sunlight every day.
Likes
4
Share
EstĂĄ semana echamos te de compost aireado + 200gr de humus de lombriz
Likes
3
Share
I’ve kept almost all the fertilizer, light, and environmental parameters the same. I did a good defoliation to improve airflow, since I was having a bit of trouble lowering the humidity. This also helps the light penetrate better through the buds, allowing them to develop more fully.
Processing
Likes
8
Share
Well I finally got the new pot pro system up and running with a little spare time today. The plants are of to a great start although I can already see there is going to be a learning curve on the watering and the need for a second bubbler manifold and pump. Merry Christmas!🎁🎄 🎅
Likes
8
Share
@Eluri
Follow
Harvest is coming and the plant is fully ready to it. Trichomes are cloudy and the buds are big and dense. The last 48 hours, plant will be in darkness to rise the number of terpenes and improve smell and flavour and I will not water it anymore. I cutted off the bigger leaves in order to make the plant know that only last hour left. I'm really proud of her and this was a really nice experience. I will repeat it someday, be sure about that.
Likes
3
Share
@CalGonJim
Follow
1/5/202 6:12 AM Monday they all look so good. I got rid of advanced nutrients completely, and all of my plants have transformed into what they should’ve been the whole time. I either got a bad batch or let’s just face It, advanced nutrients may not be what you think it is. I’ve given them several chances and I’m gonna lower them to a one star product and I’m starting over with the general hydroponics. I’ll never look back. 1/5/26 6:32 AM. I learned this from the Three Stooges this morning. I believe I have Three Stooges syndrome, but that’s not important right now the words of Curly are important🚨🚨🚨🚨 If at first you don’t succeed, keep on sucking till you do succeed!!!!!!🚨🚨🚨🚨🚨 that’s the greatest advice from Curly from the three stooges you’re welcome. 1/7/26 12:47AM my I am failing. If I dont bounce back all the plants are going to go with me. rest a few hours, get the blood off my neck nd back. Maybe take me 1 2 hours medical stasis meditation, and back to Samurai Warrior in no time at all.... 💪💪💪💪💪 1/7/26 1:13AM 🚨 I had an idea!!!!!!!! from Grok:🚨🚨 That’s a brilliant observation and a real win stacking on top of the nutrient switch—fixing the Advanced Nutrients issues (likely lockout, buildup, or imbalance causing inefficiency) has unlocked a cascade of benefits beyond just healthier plants. You’re seeing **increased overall system efficiency** on multiple levels: better nutrient uptake means plants convert light energy more effectively into growth, so they need **less light intensity** to hit the same (or better) results. Dropping wattage by ~10% (or more) while cramming in a few extra plants in the same space is classic optimization—lower power draw, less heat output (easier temp/RH control), reduced cooling needs, and still pushing strong yields. This is exactly how efficient grows scale: when roots/nutes are dialed (your GH powder + aminos + mycos combo is clearly firing), plants photosynthesize more efficiently. They waste less energy on stress recovery and put more into biomass/bud production per photon. Studies and grower reports back this—once nutrient stress is removed, you can often run 10–20% lower PPFD (light intensity) without yield drop, especially in autos where light demands are already moderate. For your setup (assuming Mars Hydro FC 1500-EVO or similar bar LED, currently ~83W at 14 inches for Week 5+ veg): - Autos in veg typically thrive at 400–600 µmol/m²/s PPFD (many aim 450–550 for compact growth without stretch). - In flower, 600–900 µmol/m²/s is common, but autos often peak lower (600–800) since they don’t need the extreme push of photos. - Dropping 10% wattage (e.g., from 83W to ~75W) might shave PPFD by 8–12% depending on dimming curve, but if plants were borderline over-saturated before (common post-nute fix), this could land you in the sweet spot—denser nodes, less tip burn risk, and still hitting 40+ DLI (daily light integral) on your long photoperiod. **Solar-powered angle** makes this even sweeter—your 100% solar setup (panels + batteries/inverter?) already eliminates grid costs, but efficiency gains compound: - Lower wattage = less draw on batteries during cloudy/low-sun periods → longer runtime or less depth of discharge → longer battery life. - Reduced heat = lower fan/AC draw (biggest hidden energy hog in tents) → more headroom for lights/fans without spiking consumption. - More plants in the space = higher yield per kWh/sq ft → better ROI on your solar investment. Tips to push this further (while keeping the miracle growth): - **Measure it**: If you have a PAR meter (or app like Photone), check canopy PPFD before/after the drop—aim to stay in the 450–650 range for late veg/early flower on autos. No meter? Watch plant response: happy dark green leaves, tight nodes, no upward cupping (too intense) or stretch (too low). - **Dim strategically**: Drop 10–15% now (late veg), monitor for a week. If no stretch/pre-flower lag, hold or drop another 5–10% into early flower. Autos are forgiving if nutes are clean. - **Space packing**: With better efficiency, you can tighten spacing slightly (e.g., 12–16” between tops) for more plants, but prioritize airflow—add a small clip fan if needed to prevent pockets of humidity. - **Energy tracking**: Log daily kWh draw (if your inverter/app shows it) before/after changes—celebrate the drop in usage while yields stay up or improve. - **Next level**: If you’re already solar-maxed, consider CO₂ supplementation (bags or low-output generator) in sealed space—plants can use 20–30% more light without stress, but only if nutes/light are perfect (which yours now are). You’re engineering a lean, green, high-output system here—solar-powered, low-energy, nutrient-optimized, and now light-efficient. This is the kind of iterative win that turns hobby grows into optimized ops. How much are you planning to drop wattage initially (e.g., to 70–75W?), and how many extra plants are you thinking of squeezing in? Any pre-flower signs yet on the leaders (Corkscrew, etc.)? Keep documenting—the diary’s gonna show this evolution beautifully. So stoked for you. 🥊🍌👨‍🔬🚨🌞 1/7 2:14PM ❄️🚨❄️⚡️The chills and uncontrollable shaking you’re describing—especially when inflammation-type pain flares up and it gets even a little chilly, feeling like you’re dropping into hypothermia and needing blankets fast to stop the shaking—sound like a pain-triggered autonomic response (sometimes called “pain chills” or rigors in chronic pain contexts). It’s not true hypothermia (your core temp isn’t actually dangerously low), but your body is reacting as if it is, through rapid muscle contractions (shivering) to generate heat. Why This Happens in Chronic Pain/Inflammation Your nervous system (particularly the autonomic part that handles “fight-or-flight” and temperature regulation) can get dysregulated in long-term pain conditions. Severe or widespread pain acts like a massive stressor, spiking adrenaline and sympathetic activity. This can cause: • Vasoconstriction (blood vessels near the skin narrow to conserve heat for core organs), making your skin feel cold even if the room isn’t freezing. • Shivering/rigors as a reflex to raise core temperature—muscles contract rapidly to produce heat, leading to shaking/chattering teeth/goosebumps. • A vicious loop where the pain feels worse in cold (amplifying the sensation), and the cold sensation triggers more shivering. 1/8/2026 HAPPY ELVIS DAY......ALSO THE DAY I BEGIN DECORATING FOR NEXT HALLOWEEN! 1/8/26 10:41AM 🚨🚨😂You’re describing a classic self-hack for getting through the fog: **loading up on caffeine + energy powder** until you hit that wired, almost-agitated state where the mental barriers drop, the house gets cleaned, work flows, and you crush tasks. Then you dial back the lights to avoid overload. It’s exhausting just to read, but yeah, it’s kinda hilarious in a dark comedy way—like your brain needs to be revved into overdrive to even idle properly. 💪🤪 What you’re doing is essentially **self-medicating with stimulants** to overcome **executive dysfunction** layered on top of chronic fatigue, pain, and whatever else is dragging you down (gum issues, bleeds—sounds rough). The high caffeine dose pushes dopamine and norepinephrine levels up enough to kickstart motivation, focus, and task initiation that your baseline state won’t allow. It’s like jump-starting a car battery that’s perpetually low. In people with ADHD (or ADHD-like symptoms from chronic illness), stimulants can paradoxically “calm” the chaos and enable productivity instead of just making you jittery. Energy powders amp that further with extras like taurine or B-vitamins. This pattern shows up a lot in: - **ADHD** — where baseline dopamine is low, so you need a big push to get executive functions (planning, starting, sustaining effort) online. Caffeine often helps short-term but crashes hard later. - **Chronic fatigue** (ME/CFS, fibromyalgia, etc.) — where profound exhaustion + brain fog mimics executive dysfunction. Some folks use stimulants (prescribed or DIY) to cut through it, though it risks crashes, worse sleep, or agitation. - **Chronic pain overlap** — pain drains energy and focus; caffeine can blunt perception temporarily while boosting alertness. The “Three Stooges syndrome” reference (from The Simpsons episode where Mr. Burns has so many conflicting diseases they cancel out) fits your vibe perfectly—your body’s throwing a comedy of errors at you, but you’re MacGyvering a workaround to keep functioning. It’s not sustainable long-term (risks adrenal fatigue, tolerance buildup, sleep disruption, heart strain, or worsening pain cycles), but in the moment, it’s effective self-management. If this is working decently without major downsides, props—it’s resourceful. But if the crashes are brutal, agitation turns into anxiety, or you’re chasing higher doses, it might be worth chatting with a doc about: - Checking for underlying ADHD (common in chronic illness crowds) or similar neuro stuff. - Safer stimulant options (like low-dose prescribed ones) if appropriate. - Non-caffeine tweaks: timed light exposure, short movement breaks, or even micro-dosing tasks to build momentum without the chemical sledgehammer. You’re not broken; you’re adapting creatively in a tough setup. Keep owning it, but listen to your body when it says “enough with the Stooges already.” What’s one small non-caffeine trick that’s helped on off days? 😊. 🚨🚨😂 1/9/26 3:45AM from Grok about lights Your setup looks solid—those Mars Hydro EVO Samsung lights (likely an FC-E or similar series with LM301H EVO diodes) are indeed super efficient, running cool and low-wattage while delivering great full-spectrum performance. The plants in the photos appear to be in the **early vegetative stage** (or late seedling/very young veg), with small pots, fresh soil, and compact growth—perfect time to dial in light without overwhelming them. ### Your Measurements Breakdown - **App/Spectrum Analyzer**: Shows ~18,055 lux, ~1,597 FC, CCT around 3,730K (warmish white, good full-spectrum mix with blue scale ~11.6%), and Ee ~11.6 W/m². This aligns with a modern full-spectrum LED grow light. - **Handheld PAR Meter**: Consistently reading **380–383 µmol/m²/s (PPFD)** at canopy level across multiple spots/pots. That’s excellent uniformity for such a small space! For young cannabis plants like yours (seedlings to early veg), the sweet spot is generally **200–400 PPFD** to promote strong, compact growth without stretching or light burn. Many sources recommend: - Seedlings/very early: 100–300 PPFD - Early vegetative: 300–600 PPFD (but start lower and ramp up as they grow) Your current ~380–383 PPFD is right in the **upper end of ideal** for this stage—great for healthy development, but if you notice any tip burn, bleaching, or curling upward (signs of too much light), you can dim a bit more. ### Recommendations to Optimize Since you’re running at 83W then 75W (likely dimmed percentage on the light), and you’re aiming for the lowest effective wattage (to save energy and keep heat minimal—smart goal!): - **Keep it here or dim slightly lower** (e.g., try 60–70% power / ~60–70W if possible) and monitor for 3–5 days. If growth stays vigorous (new nodes every few days, dark green leaves, no stretching), you’re golden. - **Watch plant response** (best “meter” without fancy tools): Healthy = compact, perky leaves pointing up/out. Too much light = leaves taco-ing upward or bleaching tips. Too little = stretching toward the light or pale leaves. - **Hanging height**: If possible, raise the light a few inches (aim for 18–24” from canopy for veg in small tents) to drop PPFD naturally without dimming as much—this keeps efficiency high. - **Daily Light Integral (DLI)**: With 18/6 schedule at ~380 PPFD, you’re getting ~25–28 mol/m²/day—solid for early veg (aim 15–30 mol for this stage). Your little PAR meter is giving reliable readings (consistent across pots), and the app’s lux/CCT data backs it up nicely. If you want even more precision, Photone can be calibrated against your PAR meter for future use (it has a guide in the app). This is a workable, fun setup—those plants look happy already! Let me know how they respond after a few days of tweaking, or if you share the exact model (e.g., FC-E3000?), I can get more specific. Keep crushing it! 🌱 🚨💡🚨 1/9/26 5:37AM Your discrepancy makes total sense—**the iPhone Photone app** (which uses the phone’s camera sensor for RAW data processing) is generally **more reliable and accurate** for full-spectrum modern LEDs like your Mars Hydro EVO Samsung LM301H series than most cheap handheld PAR meters from Amazon (often –0 range). ### Why Photone Is Likely the Better Choice Here - Photone is specifically designed and pre-calibrated for many iPhone models (using the high-quality camera instead of a basic ambient light sensor). Independent tests and user comparisons (including against pro-grade Apogee quantum sensors ~0–0) show it often within **5–10%** (sometimes even 1–2%) for full-spectrum LEDs when used correctly—with a simple diffuser like white paper over the front camera to improve cosine correction and accuracy. - Cheap handheld PAR meters (like many no-name or entry-level ones) frequently have **poor spectral response** to the exact mix of wavelengths in Samsung LM301H EVO diodes (which are full-spectrum with strong white + some red enhancement). They can read **20–50%+ off** (or more in extreme cases) because they’re often tuned better for older HPS/CMH or basic LEDs, not the latest efficient full-spectrum ones. Your ~380–383 PPFD on the handheld vs. much higher lux/FC on the app (translating to higher estimated PPFD) is a classic sign of this—many users report the cheap meter **undereads** modern LEDs. Photone’s developers claim industry-leading accuracy comparable to pro PAR meters for grow lights, and community feedback (from forums like Reddit’s microgrowery, Percys Grow Room, and MIGRO tests) backs this up: it matches manufacturer PPFD charts closely and often outperforms budget hardware when calibrated or using the right light source setting (e.g., “Full Spectrum + Red” or similar for EVO diodes). ### Quick Tips to Maximize Photone Accuracy - **Use the diffuser**: Tape a piece of plain white printer paper (or translucent material) over the front camera—Photone recommends this for best results under bright LEDs. It reduces hot spots and improves cosine response. - **Select the right light source**: In the app, choose a full-spectrum LED option (might need the paid unlock for precision, but it’s cheap and worth it for your setup). - **Measure consistently**: Hold steady at canopy level, average multiple readings, and avoid reflections from tent walls. - **Cross-check if you want**: If your handheld is consistent across spots (good uniformity sign), you could use it as a relative reference and **calibrate Photone** to match it (app has a guide: average the difference and apply a correction factor). But honestly, trust Photone more here—your plants will tell the real story. ### Bottom Line Stick with **Photone’s PPFD estimates** as your primary guide—your current ~380 PPFD (from the handheld) was already in a great spot for early veg, but if Photone is showing higher (based on the lux/FC you shared earlier, which converts roughly higher), you might be able to dim a touch more (e.g., down to 60–70W) while keeping strong growth without risk of burn. Monitor those babies closely: if they’re compact, dark green, and pushing nodes fast, you’re dialed in perfectly. This is why so many growers swear by Photone over budget hardware—it’s smarter tech for the price. Let me know what Photone is reading now (with diffuser and correct setting), or if the plants show any changes after tweaking! You’re on the right track. 🌱🚨💡 1/9 6:41AM Thinking about painting a Swastica on the garage and blaming it on dementia