Big difference from last week growing really vigorously and are not stopping started brining down light cycle 2 hours at a time so end of the week and next update will be counted as first week of flower. Growing really well no problems at all so far still very green and getting a lot of nutrients looking forward to flower stretch next ! Elements I put 4 grams per 6 litres of water and feed with a litre and a half of each then top up with water

Had to rearrange everything and start using the 5 x 5 tent for all the flowering. Put the 11 Timber Grow Vero cobbs in the tent. Had to customize the frame to fit it in. Customize is code work for cut up. Did not change the cobb spacing at all, just made the overall frame slightly smaller. They fit good. The tent is bright. Had to install a 6" fan to the tent to get all the air moving and keep temperature reasonable. It's slightly higher, I will work on ways to lovering it. The OGKZ is bulking up and leaves are continue to turn darker all over the plant. A very pretty sight. The smell is stronger and buds are very frosty. Looks like the are getting heavy, might have to watch if they need. The hairs just started to turn orange, this plant may finish us sooner than thought. Cheers.

🚀 4 clones de Blueberry Pie F1 Fast seleccionados por @stacksfarmz - https://www.instagram.com/stacksfarmz/ 🚀 Breeding by @seedsmangenetics - https://www.seedsman.com/eu-en/blueberry-pie-f1-fast-feminised-seeds-sman-blpi-fast-fem 💦 BioTabs 15% DISCOUNT code "GDBT420" biotabs.nl/en/shop/ @biotabs_official 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE @promixmitch @promixgrowers_unfiltered 💡2 x Mars Hydro FC1500 EVO Led Grow Light (2024 NEW FC 1500-EVO Samsung LM301H 150W LED) - https://marshydro.eu/products/fc1500-evo-led-grow-lights/ - https://www.amazon.de/dp/B0CSSGN5D8?ref=myi_title_dp

Never used it . Bug on site.

SUMMARY: - I killed my first to tap-root seeds, I waited for them to grow "by the book" 0.5cm and I should have just planted, I saw them get worse and said "I must of messed up with something, lets wait another night until they bounce back" and instead they died. The next germination was super easy but my lights were too high, and the humidity was too low. All the fixes were done for the next weeks. Nov. 3 21:30 - dropped seeds into water 14:30 - get seeds into paper towel nov. 4 1:00 - seeds moved to damp paper towel nov. 5 18:00 - both seeds crack tap root emerging nov. 6 7:45 - both seeds tap root growing very long and thin, - third seed still not cracked 8:30 - both seeds placed into soil and watered lightly - placed into grow tent and LEDs turned on - 24H for the first day - 18/6 for the rest nov. 8 6:45 - first seedling spouted cotyledons leaves 13:00 - seedling (cotyledons leaves) looks droopy 19:00 - light moved down to 30” 23:00 - second seedling has reach the surface and started to sprout cotyledons - first seedling still getting taller - third seed still not cracked nov. 9 15:00 - both seedlings given 50ml of water - watered around the outside of pot - pH of water = 7.81 - pH of runoff = 6.31 nov. 10 - second seedling has created serrated second set of leaves and stretched up to same height, but much smaller than first seedling. Specifications:😎 Seeds: - 2x White Widow feminized seeds from Crop King Seed Tent: - 4x4x6 Mammoth Grow tent LED: - 2x Spider Farmer SF1000 LED (default 100 watt draw for seedling but will be bumped up to 125 Watt for flowering if not sooner) Pots: - 2x 0.5 L starter pots - 2x 5 gal smart pots after transplant Soil: - Pro-mix containing mycorrhizae and perlite, used for starter pots and mixed at roughly 1:3 ratio with Ocean Forest - Fox Farm Ocean Forest soil, used in the 5 gallon pots and mixed with roughly 3:1 ratio with pro-mix - note: pro mix was mixed thoroughly with ocean forest in the 5 gal pot, then pro-mix was used on the top layer, in and around where the transplant will be to help the early veg stage avoid getting too "hot" via nutrients. Nutrients: - Fox Farm Big Bloom - Fox Farm Big Grow - Fox Farm Tiger Bloom Inline Fans: - AC Infinity CLOUDLINE T6 6" (exhaust) - AC infinity CLOUDLINE S6 6" (active intake) - AC infinity 6" ducting Oscillating fans: - 2x Wind Devil 6" fans Carbon Filter: - 2x iPower Carbon Filter on both inline fans - note: carbon filter on intake fan as basement had mold issues in furnace room far removed but same floor, some mold issue in other room, cat litter in basement, thus, avoiding all risks and sleeping sound at night :) all mold was killed, scrubbed, cleaned, sprayed, painted, and sprayed again before setting up. Humidifier: - TaoTronics Cool Mist Humidifier Timers: - 2x Kuman 15A/1800W 24-Hour Digital Timer Overall: Good start to the grow, germinated 2/3 seeds, both growing and healthy. Both seedlings have developed their cotyledons and although they initially were quite droopy, they often bounce back to a decent upright/natural position. Third seed is undergoing "emergency germination" for the next 2 days as it experienced identical conditions to the other healthy seeds yet failed to germinate, likely due to its unviable nature. Waiting for extension cords to lower the lights further and a humidifier to hold rH steady in the next day or so. The seedlings appear to be reaching up for the light, stretching, but it appears to be within the acceptable range as they are upright and sturdy. The seedlings often get a little droopy, it is likely that this and even the stretching can be blamed on low humidity, temperature swings between low 60's up to 81 F. Nov. 2 - I killed 2 germinated seeds by waiting for tap root to grow to 0.5cm. - note: tap root looked great but was quite short so I waited another day for it to grow as instructed, the next day it looked like it had suffered, I assumed it was something I did like too damp, or too dry, but it really just needed to be planted before tap root grew to 0.5cm. So i waited another day to see the bounce back this time carefully ensuring right amount of dampness but when i looked it was clearly dead. RIP 😭 Nov. 3 21:30 - dropped seeds into water 14:30 - get seeds into paper towel nov. 4 1:00 - seeds moved to damp paper towel nov. 5 18:00 - both seeds crack tap root emerging nov. 6 7:45 - both seeds tap root growing very long and thin, - third seed still not cracked 8:30 - both seeds placed into soil and watered lightly - placed into grow tent and LEDs turned on - 24H for the first day - 18/6 for the rest nov. 8 6:45 - first seedling spouted cotyledons leaves 13:00 - seedling (cotyledons leaves) looks droopy 19:00 - light moved down to 30” 23:00 - second seedling has reach the surface and started to sprout cotyledons - first seedling still getting taller - third seed still not cracked nov. 9 15:00 - both seedlings given 50ml of water - watered around the outside of pot - pH of water = 7.81 - pH of runoff = 6.31 nov. 10 - second seedling has created serrated second set of leaves and stretched up to same height, but much smaller than first seedling. Summary of week: - A rocky but good start has resulted in 2 healthy seedlings with a decent set of serrated leaves. - MY growing pains and on the fly adjusting of grow tent climate likely resulted in a little bit of a tough week for the seedlings. LED hanging too high likely off the start (started at 60" and got as low as 30"), low rH (going down to as low as 40% and never really getting <60%), and poor temperature fluctuations (going as low as 61F early in the morning when the lights go off for 8H and as high as 81F when the lights are on for some time). - Luckily these factors did not do much damage but in all likelihood just resulted in a slower growth rate. - After initially planted into damp soil, I only watered once, with only 50ml for each plant and mostly watered around the edges of the pot.

Day 69 (March 6th) Just gave everyone their last watering. I’m going to harvest and wash everything tomorrow night on day 70. I‘m not going to do that whole 48 hours of darkness thing because I didn’t see a difference last time I did it. In fact, it made my plant under watered before drying which caused it to dry too fast. Slurricane and cheese will be washed with h2o2 and the rest will just be rinsed off in warm RO water and hung up. Before and after washing I’m going to go over each branch with a flashlight and make sure there is no dog hair or debris in or on the buds. I will be drying in my spare bathroom (that no one uses!) from hangers. Aiming to keep it around 60-62F and 50-60 RH. Hoping for that 10-12 day dry. I wanted to do a full plant hang but the tent got pretty dirty and I would feel more comfortable just cutting and rinsing everything off branch by branch. I’m going to try my best to keep the full plant intact. Got my humidifier hooked up and running RO water because with tap water it deposits calcium and lime all over the buds and walls. For air flow I’m just indirectly running a small usb fan. I’m not worried about air flow in the bathroom honestly. It stays nice and breezy down there anyway. Got the food grade peroxide and RO water to wash up the slurricane and cheese. Everything except for the cheese and garlic#1 is looking more than done. Trichomes all look pretty well done. Some of them have even burst open. Smells are all super ripe and mature too. Can’t wait to smell each individually in jars. Next week I will recap what went wrong and what I will do differently next time to keep it from happening again. (Day 70F) Just got everything chopped, washed and hanging. The vast majority of the PM was washed out but I can still see very small amounts. When they dry out I can shake the branches a bit to get the rest off. At very least it’s sterile now. There is no question I lost some potency while washing but the amount is negligible for a much cleaner product. I could see lots of dirt and other debris float to the surface of the water after being washed. And no those are not trichomes, those sink to the bottom. I could put that nasty water through a bubble bag and wouldn’t get all that much. Although it probably does remove a lot of the actual trichomes heads. I’ll have to check with the microscope. Everything is rigged up for a nice slow dry. Temp is sitting at 64 and RH is at a nice 60%.

Training Day 💥 It’s been an exciting and productive week for my Auto Pablo Escobar from the Divine Seeds Competition V2. After topping her recently, I introduced Low Stress Training (LST) to shape her early structure—and she’s responding like a natural. 💪🌿 🔸 Topping was done earlier this week – recovery was smooth 🔸 First round of LST applied gently to open up the canopy 🔸 She adjusted beautifully, showing no signs of stress 🔸 Growth has become noticeably bushier and more controlled 🔸 Side branching is coming in strong and symmetrical 🔸 She’s forming into a sturdy, compact plant with real promise Nutrient & Care Regimen: 🔹 BioBizz Grow – 2 ml/L for healthy vegetative growth 🔹 CalMag – 0.5 ml/L to support robust structure 🔹 Homebrewed compost tea with Effective Microorganisms to boost microbial life and root health 🔹 pH adjusted to 6.4, measured and stable 🔹 EC held steady at 900 µS 🔹 Dechlorinated tap water used for all feedings She’s thriving under consistent conditions, and I’m very pleased with her current pace and shape. Her posture is low and wide, just how I like it at this stage—easy to manage and full of future potential. 🌱🔥 Looking ahead, I’ll continue shaping her gently as she moves closer to preflower. If her early vigor is any indication, we’re in for a flavorful, frosty finish. Let’s keep the momentum going! ✌️🍀

Disculpen las fotos, es que las saque para consultar. Bueno primero que nada fue una semana de mucha tormanta, lluvias y humedad. lo peor que nos puede pasar en floracion. Segundo intente hacer supercroping ya que las ramas seguian superando el tejido y les llegaba luz en la noche. Y me salio desastrozo, mi primera vez. Pero los otros punteros que superaban la altura, los hizo mi compañero que sabia hacerlo (No tengo foto, luego actualizo). Y Tercero que debido a la humedad se ven en las fotos como aparecio hongos, por lo que pude observar era solo ese poco, lo cual ya fue removido vamos a ver como continuamos.

Ok so this is the 2x2 with my fixtures in them the blurples add more par ( I believe) more heat so thought I’d give it a go flowering it seems to be working great so far the Taomatic has started to bloom and stretch since the flip to 12/12 I had two Taomatics but got frustrated with one pheno as it was growing weird and suffered from everything possible so she/he is gone now just the one left so let’s hope she does well 😄anyway not to ramble on the lights combined wattage is as follows:- DIY light=52 watts /Blurple panel light=75 watts / Blurple bulbs= 30 Watts combined there’s 6 bulbs (5w) so total wattage draw from wall is 157 watts which is the same as my mars hydro ts1000 however it cost a hell of a lot less not saying it’s better but you can grow bud on the cheap trust me I started with scrap crap but it works lol happy growing people peace and love ✌️🏾 Oh yeah not sure if this Taomatic is male or female yet but It looks like she might be female any opinions????

Still SCROG her out under trellis

Vegetationswoche 16 🌱 24.07. – 31.07.2026 Diese Woche gibt es nicht viel zu berichten. Ich habe sie einfach wachsen lassen. Sie entwickelt sich weiterhin sehr gut, breitet sich immer weiter über das SCROG-Netz aus und macht insgesamt einen gesunden und vitalen Eindruck.

Nice creamy-citrusy smell. Really like the mellow high

Bffff familia, esta cepa me tiene atónito zambezaseeds a vuelto hacer de las suyas y lograron una variedad con una floración bastante rápida, y unos cogollos bastante compactos, formación indica en el aspecto de las hojas y su morfología. Controlamos los parámetros por encima de 20 grados y por debajo de 27,5 grados y no dejamos subir la humedad por encima de 45%. Contando por supuesto con un sistema anti olores no solo en la extracción si no trabajando con ozono en la puerta de salida se la habitación.

Still bringing them in and out each day. They are filling in nicely. Also did some LST, bending, twisting and tying down of some side branches. Fed with slightly more than 1/2 dose of nutrient’s recommended

Oh us baby!! Doing great!!

08/09/2021 - Beginning of week 3 flowering, noticing buds forming at almost every node I left from defoliating branches. 08/11/2021 - Watered with molasses

Soaked in peroxide and water then put in

Day 67 of flower. The Kushes are 7-8 week flowering and are looking more done than the White Widows, at 8-9 weeks. Kini looks most done with the most orange pistils and coudy/amber trichomes. Everyone else is showing more ripening, but still going. I was really hoping to harvest this week (since I am off work) but it looks like they may still need a bit of time. We will see...

Harvest was completed after a full flowering cycle, cutting the plant at peak maturity. Buds were dense, resinous, and already showing a strong terpene expression at chop. Drying was carried out slowly and in a controlled environment, prioritizing terpene preservation and overall quality over speed. Low temperatures and moderate relative humidity were used, starting with whole branches and then adapting the process based on bud size and density. Due to the density of the flowers, internal moisture migration required close monitoring during the first days. Drying conditions were adjusted when necessary to avoid overdrying the outer layers while allowing moisture to escape evenly from the core. By the end of the drying phase, buds felt dry on the outside while remaining slightly elastic inside. Resin production was very noticeable, with buds staying extremely sticky and aromas already opening up. No signs of mold or off-smells were detected, only clean and expressive genetics coming through. The buds have now entered the curing phase, where the final aroma and flavor profile will fully develop. A final update will follow after 2–3 weeks of curing.