Likes
34
Share
So I addressed the calcium and magnesium deficiency, I purchased Roots Organic’s calcium and magnesium dry amendment and top dressed all of the plants accordingly. They are bouncing back currently, I will be setting up the SCROG this week and will post pictures on Sunday. Really excited for Bluenana she is definitely going to be something to watch! Honestly they are have me excited. Also, I’m growing organically and have not used any bottled nutes. I’m currently using all Roots Organic products. Sorry for not stating this sooner . I fixed the high temps in the room, always another good week growing!
Likes
39
Share
@J_diaz420
Follow
Todo marcha bien!! Creo que lo fundamental en esta semana es arta humedad y riego foliar por encima, pero en las raíces tratar de no llenar de agua ya que a esta temprana edad la plántula no tiene tanta raíces formadas, lo que provoca que se estanquen, quedando enanas y mostrando carencias por no poder beber. Trataré de seguir como voy, saludos 🍀
Likes
14
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
3
Share
@KcKush
Follow
*Vam Doesnt seem to increase root size. Looked identical to no Van control. *increased PPM To 350 *Transplanted to 1Gallon pots using HappyFrog
Likes
Comments
Share
🌱 Grow Diary Update — Sour Diesel Week 4 | First week of flower (12/12) This week, the spotlight is on Sour Diesel, because she clearly stood out from the rest of the room — and when one plant speaks louder than the others, we listen. ⸻ 📍 Quick recap (so everyone is on the same page) • Sour Diesel just entered week 6 / first week of flower • She was running on Autopots with mineral-only feed • Organics and amendments were removed from the Autopot system • The rest of the room handled this change fine • She did not She started showing: • Droopy posture • Loss of vigor • Early deficiency-type signals • A general “I’m not comfortable” look Important detail: 👉 She was the only plant reacting like this. ⸻ 🌿 Why this happened (the key lesson) Sour Diesel is an old-school genetic, and not all strains respond the same way to abrupt system changes. In her case: • She was previously thriving with organics + minerals • Removing organics reduced: • Nutrient complexity • Biological buffering • Availability of secondary elements • This happened right at the transition into flower, when demand increases sharply On top of that, we had environmental pressure: • Outside temps: ~4°C • Outside humidity: ~98% • Room stabilized at: 21°C / 58% RH Those conditions are acceptable — but combined with: • Feed change • Flower transition • Genetic sensitivity …it was enough for her to react. ⸻ 🚿 Why we took her off Autopots Autopots are great — but they’re not universal. We removed her from the Autopot regimen because: • She needed immediate, tailored feeding • She wasn’t responding well to mineral-only delivery • Hand-feeding lets us: • Adjust EC gently • Reintroduce organics • Observe response feed by feed This wasn’t a system failure — it was a plant-specific decision. ⸻ Current feeding strategy (now) • Medium: hand-fed (off Autopots) • EC: 1.43 • pH: 5.9 • Full recipe: organics + minerals • Added: CalMag Pro Why CalMag Pro? • We’re using rainwater + humidifier water, which is very soft • Low calcium & magnesium availability can show fast in flower • This is both: • A corrective move for her • A preventive move for the whole room Meanwhile, the rest of the Autopot system is running: • 2.29 EC • pH 6.0 • Mineral-only • Other plants are stable and happy ⸻ 🌬️ Environment (current) • Lights: stable • Airflow: good • Temp: ~21°C • RH: ~58% Nothing extreme — but this shows how context + timing + genetics matter more than numbers alone. ⸻ 🔮 What we expect (and what we don’t) What we expect: • Gradual recovery, not overnight • Leaf posture improving first • New growth responding before old leaves • Stability over speed What we don’t expect: • Instant “fix” • Old damage to reverse • Her to behave exactly like the rest of the room From now on, she’ll simply need a bit more attention than her sisters — and that’s okay. ⸻ 🧠 The bigger takeaway This is a perfect example of why: • There is no single “best way” • Systems are tools, not rules • Genetics always get a vote • Listening beats forcing We’re not chasing perfection — we’re responding with intention. We’ll keep monitoring her closely over the coming week and adjust calmly, step by step. As always, this is just our experience and observation — not a universal recipe. Plants teach, we adapt 🌱💚 👽 New team member Meet Mr. Baggy Our new fluffy alien/beaver/whatever-he-is friend, won through a Grow Diaries contest. Expect to see him around — he’s officially part of the grow now. Week 5 Veg/pre-flower | 8×8 Tent | Master Conditions 🌍 External Environment (Context) • Outside temperature: ~5 °C • Outside RH: 92–96% (very high humidity) • Strong seasonal pressure influencing internal stability ⸻ 🌡️ Internal Tent Conditions • Tent temperature: ~21.8 °C (noted drop due to cold external temps) • Tent RH: ~58% → Very good considering outside conditions ⸻ 💨 Airflow & Circulation • Primary airflow: Bottom → top → wall return • Pattern: Full-room vortex circulation • Additional fans: Central airflow to break blind spots and mix layers • Goal: No stagnant pockets, uniform VPD across canopy ⸻ 💧 Water Source & Rationale • Water: Dehumidifier water + rainwater • Base EC: force • Systems designed to support plant intelligence, not override it FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it.GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial Instagram: https://www.instagram.com/dogdoctorofficial/ YouTube: https://www.youtube.com/@dogdoctorofficial ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: 🔆 Lighting & Environmental Control • Future of Grow — Advanced LED lighting technology https://www.futureofgrow.com/ DISCOUNT CODE: DOG20 • Lumiflora — Under-canopy LED lighting https://lumiflorade.com/ • TrollMaster — Environmental controllers and automation gear (past collaboration) ⸻ Genetics • Zamnesia Seeds — Genetics used in this project https://www.zamnesia.com/ ⸻ 🌱 Soil, Substrates, Boosters & Root Support • Plagron — Substrates, bio mixes, and supportive products https://plagron.com/en/ ⸻ 🎒 Storage, Curing & Preservation • Grove Bags — Curing and storage solutions https://grovebags.com/ ⸻ 📸 Photography Equipment & Tools (Not sponsors, but part of my creative toolkit) • Sony A6700 • Sony full-frame macro lens + few more • Stacking photography workflow - learning • iPhone (for behind-the-scenes shots) We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚 📸 P.S. – The Eye Behind the Lens All photos in this diary (for now — except for the ones showing the camera, which I took with an iPhone) are taken with a Sony A6700 paired with a Sony full-frame macro lens and a few more. Photography is part of the story — it’s how we share the fine textures, the glow, and the quiet details that words can’t always capture. I’ve also started experimenting with photo stacking — a technique where multiple images, each taken at a slightly different focus point, are layered together to create one perfectly sharp image from front to back. It’s not digital enhancement or AI; it’s pure photography — a way to reveal the plant’s beauty in microscopic depth, from trichome to petal. You’ll even see a few shots of "ghost me" capturing the shots — camera, lens, setup — because every grow deserves not just to be cultivated, but documented like art. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial NEW DISCORD - Official Server Invite Link : https://discord.gg/ksjAkA5T74
Likes
1
Share
@Ninjabuds
Follow
This plant definitely could have used a little longer in veg but the bigger plants were ready to flip it will still be a great plant it just needs a long veg to reach full potential. The plant is nice it has a skunk smell and the leaves are growing well and good color. The plant is starting to get some strech going on. Not sure if it’s the cold weather but they don’t seem to be flipping to flower as fast as my last grow. The leaves are starting to be perked up all the time and it looks really healthy
Likes
2
Share
The plants are growing at a good rate now and drinking a litre each per day. I feed them by hand and each plant gets 2litres every other day. Didn't do anything else this week other than install the trellis on the last day. This plant is at the back of the timelapse video.
Likes
1
Share
Likes
19
Share
@nonick123
Follow
Día 20 (13/05) Todas las plantas muestran las preflores! Día 21 (14/05) Baño de sol de 2 horas! Día 22 (15/05) N/A Día 23 (16/05) Riego 750 ml H2O + Regulator 0,15 ml/l + CaMg-Boost 0,25 ml/l + Startbooster 0,25 ml/l - pH 6.2 Día 24 (17/05) Las plantas salen al exterior! 😍 Les aplico heno como mulch (acolchado) Día 25 (18/05) Riego 250 ml solo agua todas las plantas Día 26 (19/05) Banana Purple Punch Auto está sedienta! Riego con 750 ml H2O + Regulator 0,15 ml/l + CaMg-Boost 0,25 ml/l + Startbooster 0,25 ml/l + TopBooster 0,2 ml/l- pH 6.2 💦Nutrients by Aptus Holland - www.aptus-holland.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
14
Share
10/2 They made it to their forever pots. Next Saturday we'll be hitting 2 months from sprout and as a whole its been a pleasure to grow these plants. They all are a very healthy green and seem to be happy. Temperatures in the region may have unexpectedly slowed them down (I grow in a basement) because temps have plummeted from around 78 with the lights on to as low as 71! I don't think they like it either. Growth has slowed with it. Never fear, space heater is here. Everything thing needs to be dialed in for the next few weeks because I want explosive growth over the next 21 days. Going to try a SST somewhere in there. Parsing through all this bro science isn't easy but it sure is fun to experiment. It allegedly gives you good root growth and provides crucial enzymes. Almost sounds too good to be true but I'm going to see how it goes regardless. I heard you can use I wide variety of seeds but alpha alpha is the only one I have on hand. Wish me luck. As for the plants: Moby= beast. I'd be a fool not to attempt to clone her. Vigorous grower and responds well to training. Not a demanding eater either, at least so far. Loving this freebie from NASC. Highly recommend them if you're in the northeast US looking for a local seed bank. GZ 1 = steady. Probably the biggest back slide if you want to call it that. Spotted some yellowing on lower leaves but they are shaded by this ones thick canopy. May not even be an issue but we keep an eye on it. Probably the biggest critic of the lowering temperatures because she's slowed down in the past 2 days. Gz2= trooper. She had a rougher upbringing and she's got a far different shape than the other two because of it. But with a little work I'm sure soon both GZ will be indistinguishable from one another. Banana daddy= forgot to take pics of her. Man have I been growing autoflowers all wrong. I may have fed this plant once. Though it should be noted that the soil I put her in was amended with alpha alpha, fish bone meal, and guano. She seems to really enjoy it so far. Not a single yellow leaf. Droopy at times though which is odd. Also some tacoing on new growth that ends up correcting itself as the leaf gets bigger. Double odd. Next time I do an auto run I'm definitely doing much less in terms of feeding and maintenance. Loving your plants too much can be deadly. Starting to figure them out though so I'm happy I did at least one. I'll post in a few days when I water my photos again.
Likes
24
Share
@3lementa1
Follow
Fed nutes at 6.3 pH. Runoff was close to 7 pH. Other than that they look like they're doing well. Very sticky and very fragrant. The leaves of the CBD Blue Shark are a nice dark shiny green. The Wedding Cake is lighter. The profiles of both are starting to come out in the flowers. The CBD Blue Shark has these long, dramatic white pistils. The Wedding Cake is starting to show its creamy colouration with red hairs mixing in with the white and looking very delicious. The smell is incredible in there now. Fruity and creamy and delicious.
Processing
Likes
13
Share
NOTE: THE COUNTING OF DAYS STARTS FROM THE DAY THE SEED STARTS ITS PROCESS, IN THIS GROW DAY 1 WAS THE MOMENT THE SEED GOT INSERTED INTO THE EASY START (i do not recomend this method for experienced growers, but higly recomend it to unexperienced growers that might accidentally damage their seedling's new root as they move them from the germination zone into their next or final pot, with easy start you can just pick up the small cube of soil and place it inside the next pot GENTLY). NOTE: For strain informations, soil recipe and nutrient's stock please do check "Germination Week" as you will find all the information there. (Do not replicate nutrient dosages as these are higly variable depending on the conditions within the grow room or tent, so you may end up damaging or killing your plants even if they are the same strain from the same breeder). --------------------------------------------------------------------___________________________________________________________-----------------------------------------------------------------------_____________________________________________________________________---------------------------------------------------------------- 03/11- All watered with 950ml of water per plant with dilluted nutrients in the rates specified above. Light schedules changed to 19/5 and will be further extended to 20/4 to allow for more hours of heat from the lights as we progress into winter. 06/11- All watered with 1,4l of water with 2ml/l Bio Rhizhotonic + 0.45ml/l of Ancient Earth. Lollipoped.
Processing
Likes
24
Share
**Encontrarás la traducción a español al final de la descripción** If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉! From/Desde: 19/08/19 || To/Hasta: 25/08/19 From day/Desde día: 28 || To day/Hasta día: 34 -----IMAGES & VIDEOS----- P5 - I'm loving this photo, is the first complete cool photo of the AK i've taken. With the structure, the fixing rods with the same length as the diameter of the AirPot, and those beauty rubbered green cables 😍. P8 - I'm feeling that those branches looks too weak, and slim for what's coming. From next week i will use Rinho Skin to see if it can help them to get fat in upcoming weeks and before flora time. I'm also minding to create some branch supports with the 3d printer that will be placed on the LST structure, I need to twist my mind a bit with it. -----WEEK SUMMARY----- Another super heat week. While at home i'm at 34~36º in the street things are worse :(. Also humidity fluctuate from 50~65º. At last I removed those ugly & dangerous cables from the branches and used a rubber covered one. For now i only need to fix her in 4 points, 1 per each main branch, as you can see, at about 13 cm of the main branch. Later i will fix her with another 2 points per branch, one in the border of the pot from inside, and the last one also in the pot's border but outside. This week i removed the first horizontal internode on each main branch, and also removed the branch that grows vertically down from the second internode leaving in place the one that grows totally up. At the end of the week i will fix the SCROG mesh, but it's not going to be permanent until later, or maybe not at all due to dark photography, as if i place the mesh i will not be able to move the plant (i need to think about it). For now, I just need it 3 or 4 days to test it as i never placed this 60x60 mesh before, and also i had to cut the central rods for the mesh. About Alice K. she's growing beauty and healthy, some week ago i found a little white spider that i killed, @time (week 7) I didn't noticed any insect signs more. Also remark that she's standing well those temperatures and some days of very low humidity some hours 35% inside the tent. And also the equitative distribution she's developing. As i said on previous week, i will kill those clones at mid week as i'm going to plant 4 more seeds in a week, and all is going to be too much work 😞to compatibilize it well with my job. -----WATERING CALENDAR----- 23/08/19 (Day 32) - 3,000 ml with all week nutrients @ 1.1 E.C. PH5.8 *****ESPAÑOL***** Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉! -----IMÁGENES & VÍDEOS----- P5 - Me encanta esta foto, es la primera foto completa guay que hago de la AK. Con la estructura, las barras de aluminio de la medida del tiesto y esos cables cubiertos de goma verde, me empieza a encantar el aspecto de la planta 😍 P8 - Tengo la impresión de que las ramas son demasiado endebles y finas para lo que está por venir. A partir de la semana que viene, usaré Rinho Skin para ver si las puedo ayudar con el engorde antes de que llegue el tiempo de floración. También estoy pensando en crear unos soportes para las ramas con al impresora 3D que irían enganchados a la estructura para LST, necesito darle unas cuantas vueltas a esto último. -----SUMARIO SEMANAL----- Otra semana super calurosa. Mientras que en casa estoy entre los 34~36º en las calles la cosa es mucho peor. También la humedad está un poco loca ya que a diario me fluctua en casa del 50~65º. Al final he quitado esos cables feos y peligrosos de las ramas y he usado un cable con goma en condiciones. Por el momento sólo he tenido que atar la planta a 4 puntos, 1 en cada rama que he dejado, como se puede ver a unos 13 cm del tallo principal. Más adelante usaré otros dos puntos de fijado en el borde del tiesto, uno de ellos en la parte interior y otro por fuera del tiesto. Esta semana he quitado el primer nodo de cada rama y también la rama que crece hacia abajo del segundo nodo, dejando la rama que crece totalmente hacia arriba. Al final de la semana colocaré la malla de SCROG, pero no va a ser de manera permanente, por lo menos hasta más adelante. Voy a empezar a hacer fotografías de fondo oscuro, y el tener la red me va a imposibilitar la tarea ya que debo sacar la planta del armario para las sesiones (necesito pensar en ello). De momento la quiero montar 3 o 4 días para probarla ya que nunca la había montado antes y también tenía que cortar las barras horizontales para la malla. Sobre Alice K. está creciendo super bonita y sana, hace un par de semanas encontré y maté una arañita blanca (Requiescat In Pace), a día de hoy (semana 7) no he visto más signos de insectos. También debo remarcar lo equitativamente que está creciendo y lo bien que soporta las altas temperaturas y la escasa humedad, hay alguna vez que he mirado el higrómetro y estaba al 35% dentro del armario. Como dije en la semana anterior, mataré los clones a media semana, voy a plantar otras 4 semillas la semana que viene y va a ser demasiado curro 😞para compatibilizarlo con mi trabajo. -----CALENDARIO DE RIEGO----- 23/08/19 (Day 32) - 3.000 ml con todos los nutrientes semanales @ 1.1 E.C. PH5.8
Likes
7
Share
If you want to speak about my „Root•Lock•Method“ in Clone and Cut cases feel free to send me a dm !!!
Likes
20
Share
Pretty happy with the grow and the harvest, the drying went well also! Each grow highlights changes for the next and this has been no different! I'll be making more training adjustments in the next runs to try and refine the vertical scrog and get to the point where it's a wall 1 bud thick! I know it will get there in the end it's just like relearning how to do a horizontal scrog! I just need to predict the way the plant will respond when the light is from the sides! Bravery and brutality during pruning I think is the key! 😂✌️💚
Likes
91
Share
@Salokin
Follow
Hi Growmies, This was her last week of heavy feeding. I have already decreased the nutes for the coming week and will probably start flushing her the week after. So that she should be finished by the end of the contest pretty much. Regardless of her age the rootball has shrunk only a little bit. I have also taken her out of the scrog to enable the canopy to open up further and allow more light penetration for the maturation of the buds. This worked actually very well, as the weight of the buds pull the plant open. Thanks for stepping by and until next week!
Likes
7
Share
( RUNTZ X F1DURB X GUSHERS )🍬🌈🍨🍧 PURP KICKIN INN END #WEEK4 CANT WAIT TILL THE BUDS SWELL UPP!! SUPA INTENSE CANDY TERPS THIS ROUND NOT BIG BUDS BUT SUPA HIGH IN BRIXX LEVEL WITH ALL THE ORGANIC CARBON INPUTS!! PPM 900/1200 1.2 max (Face Off OG x Watermelon Zkittlez) X (Runtz x F1 Durb x Gushers) 🍉🍬🌈🍧🍨🍦 LIL PRUPLE TINT WIT MOUTH WATERING SUGARY TERPS KICK INN END #WEEK4 BY WEEK 7/8 SHE WILL BE PURPLE PURPLE WIT SUPER INTENSE CANDY MOUTH WATERING TERPS CANT WAIT TILL SEE THEM BUDS SWELL UPP!! PHENO A/B NOT BIG BUDS BUT SUPA HIGH IN BRIXX LEVEL WITH ALL THE ORGANIC CARBON INPUTS!! PPM 900/1200 1.2 max
Likes
14
Share
@BLAZED
Follow
Week 4 (21-2 to 27-2) 21-2 Temperature: 25.3 degrees (lights on) 20.4 degrees (lights off) Humidity: 63% (highest) 49% (lowest) Watering: None. 22-2 Temperature: 25.9 degrees (lights on) 19.8 degrees (lights off) Humidity: 64% (highest) 49% (lowest) Watering: Both 1500 ml. Light 60% at 60 cm, LUX: +/- 15.500 Today i gave them both their first real feed of 1.5L 1.5 Liter water + 0.75 ml Calmag + 0.3 ml Silica + 0.45 gram Grow. EC: 0.7 PH: 6.0 23-2 Temperature: 29.4 degrees (lights on) 19.6 degrees (lights off) Humidity: 66% (highest) 49% (lowest) Watering: None. No pictures. 24-2 Temperature: 23 degrees (lights on) 18.8 degrees (lights off) Humidity: 65% (highest) 51% (lowest) Watering: None. 25-2 Temperature: 23.8 degrees (lights on) 19.7 degrees (lights off) Humidity: 61% (highest) 49% (lowest) Watering: None. Removed some leaves. 26-2 Temperature: 23.6 degrees (lights on) 19.7 degrees (lights off) Humidity: 65% (highest) 46% (lowest) Watering: None. 27-2 Temperature meter was broken, so no temps etc for today. Watering: Both 2000 ml. Today i topped the plants and gave them both 2L. 2 Liter water + 1 ml Calmag + 0.4 ml Silica + 0.7 gram Grow. EC: 0.8 PH: 6.0 I fully installed the AutoPots and their base aswell, wich get connected to a water reservoir.
Likes
5
Share
Hi people, how are you all???? Week 7 here, and all is good with the plant, I did some defoliation to keep the airflow, and I got a ScrOG to open the plant a little bit to get more light. I am very happy with the results until this stage, is a whole new world for me :-) Thank you for following me. Peace and love! :-)
Likes
17
Share
It's a really frosty variety, but so small... I don't know if I want to try the RF3 now.