Likes
13
Share
Likes
16
Share
@Mrg7667
Follow
Day 74 and there getting chopped today! I thought the harvest was going to be broken into two separate weeks considering the times on the Choco was listed about 7-10 days sooner then the DD (wich was listed at 70 days for flowering) However looking at the tricombs on the Chocolate Marshmallow most pheno didnt start getting amber untill the DDs did as well! A couple DD pheno could have maybe gone a couple more days but we will see! Going for reveg on all the pheno, since i didnt get to take any clones. We will see how it goes!
Likes
7
Share
Vamos familia actualizamos la cosecha de las gelato Olandese de Dutchfem . La verdad que el secado muy bien 7 días en Malla y a los botes, 40% humedad y 24 grados es la temperatura ambiental que han tenido en el secado. Por lo demás de miedo os la recomiendo. Gracias a DutchFem, Agrobeta y Mars hydro , sin ellos este proyecto no sería igual 🙏. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Buenos humos.
Likes
17
Share
@Wilstang
Follow
IPM https://www.arbico-organics.com/product/mite-predator-phytoseiulus-persimilis-plus-sachets/mite-predators https://www.arbico-organics.com/product/spidermite-destroyer-stethorus-punctillum-adults-larvae/pest-solver-guide-mites
Likes
17
Share
@Naujas
Follow
To tell the truth, I am very surprised myself, how amazing she is FastBuds Gorilla cookies, she copes well with a small space:) she drinks 1 liter every day :) everything looks better than expected:) good luck to everyone.
Processing
Likes
21
Share
Defoliated some leaves to let light in, chopped one down early as I run out of bud 🙄 it's good for less than 4 weeks flowering. Have them rice water starch again this week in with there food. A layer of frost is slowly forming 😎 hopefully they will fatten up nice and frost up really good to 🤞
Likes
13
Share
Mad I only had one seed can't wait to grow more 420 Fast Buds
Likes
7
Share
Good week for this lady. I defoliated about 30 leaves on her to make room for the other buds sites that's developing. Is there a such thing as too many bud sites??😅😅
Likes
7
Share
@Nikkov
Follow
Well, another week has passed and it has been growing not exactly as I expected, but they warned me about using only base fertilizers with an inert soil and a higher ambient temperature, I could have a not so good result, well, it's one more experience and I liked it and let's see how it will be until the end of the cycle because the next one I already ordered a starter kit from the advanced nutrients line! Let's Go!
Likes
54
Share
~ AirCube Active Oxygen Ebb/Flow System sponsored by GrowAce, featuring Strawberry Gorilla Auto by FastBuds ~ Well guy's and gal's here we go again on another exciting Autoflower run together! This time will be different as I will be doing a 'Hydroponic' run utilizing the AirCube Active Oxygen Ebb/Flow System by GrowAce, who were kind enough to sponsor me for this run, so it should be interesting to see what results I get and have some fun along the way! •Let me first tell you about this 6 Pot Ebb/Flow system from GrowAce: "The AirCube system is the one and only Ebb & Flow grow system on the market that combines the benefits of air pruning with a fully automated Ebb+Flow system! With the AirCube's proprietary fabric pot in bucket design, this system is guaranteed to outgrow any other Ebb + Flow system on the market. The results speak for themselves- grow MASSIVE roots that result in MASSIVE fruits! Air Pruning- Air Pruning only happens with fabric pots. As the roots reach the fabric walls of the pot, they penetrate and grow into the breathable fabric. Once penetrated, the roots are exposed to air, which causes the tips of the root to dehydrate and naturally prune themselves. This natural pruning process forces the roots to grow tons of lateral fibrous feeder roots. This results in a plant that utilizes the entire root zone and fills the entire pot with tons of roots. These fibrous feeder roots are incredibly effective in uptaking water and nutrients, resulting in a plant that grows healthier and more vigorously! Oxygen Benefits- Without oxygen, nutrient absorption cannot occur. On a molecular level, oxygen is needed to transmit nutrients across the cell walls and into the roots of a plant. With the AirCube's proprietary bottom lifted draining design, the system actively draws all of the water out of the bucket pulls vital oxygen into the root zone. Maximum Versatility with Any Grow Medium: The AirCube System is the only system on the market that allows you to use any growing medium you like. Use coco coir, soil, peat moss, perlite, vermiculite, hydroton, rockwool or any other medium you wish! This system is the most versatile Ebb and Flow bucket system in today's hydroponics industry. Temperature Control- with the fabric pots constructed with highly porous polypropylene fabric, heat dissipates easily and effectively. Unlike standard plastic pots, heat isn't trapped in the root zone. Heat in standard plastic containers can reach temperatures of up to 125 degrees. When this type of heat is trapped and unable to escape, it can damage your plant's health and limit the potential of your harvest. Growing in the AirCube System, plant roots grow cooler, healthier, and more vigorous. Largest Pots in its Class- this system features 5 Gallon grow buckets, the largest pot size of any other ebb and flow hydroponic system in the market. Modular and Expandable- start with 6 grow buckets and expand up to 36 grow buckets with the optional 105 gallons PopTank reservoir!" For my medium and nutrients I decided to also switch things up from my regular Organic runs, going with Plagron Nutrients and Root Royale 70/30 Coco/Perlite. When filling the fabric pots with medium, I first added just under a gallon of horticulture perlite from Nor-Cal as a base layer to ensure good drainage and then filled the remainder with the Root Royale. •Now for one of my favorites, and award winning strain from my friends at FastBuds... Strawberry Gorilla Auto: I'll be running Strawberry Gorilla Autoflower which is a 55/45 Sativa/Indica Hybrid. "ATTENTION ALL! Due to our continuous efforts in evolving our breeding process, we are proud to confirm that our Strawberry Gorilla Auto has now become one of the most potent autoflowers in the world! Paving the way to our recent success where she ranked on top & brought home the gold at the very first American Autoflower Cup in California. Moreover, she proved that not only modern autoflowers can compete with photoperiods, but they can even beat them in their field. At the most recent edition of the Farmer’s Cup and competing against various photoperiodic strains, Strawberry Gorilla Auto took home the title of 'Highest Combined Terpenes' in the highly sought-after 'Home Grow Hash' category, with an impressive 97.163 mg/g total terpene content! Our exceptional genetic selection's crowning Strawberry Gorilla Auto strain is a spectacular hybrid known for producing yields of up to 600 gr/m2 in 70 days. This is a very manageable grow that can reach heights of up to 150 cm - due to its magnitude we recommend it for more experienced growers, as a huge plant may be a little overwhelming for first-timers. This show stopping sativa heavy hybrid is perfect as an all day smoke, producing a taste bud tingling, pungent berry and diesel terpene-rich flavor combo that leaves you with a grin from ear to ear, a perfect choice for those looking for a day-and-night autoflower! "* *References: GrowAce.com, 2fast4buds.com ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: • AC Infinity 4x4 tent •AC Infinity Cloudline T6 Exhaust Fan w/ Controller 67 •HLG 650R w/UVA Bar *** For some reason GD does NOT have a listing for the USA version of the 650R so I selected the closest match to it. •AirCube Active Oxygen Ebb/Flow 6 pot System •TrolMaster Hydro-X Controller for light •AutoPilot APC8200 co2 controller fed by a 50# tank •16" Hurricane oscillating fan and 8" floor fan •Tent cooling via filtered outside air delivered by AC Infinity Cloudline T6 fan •BlueLab instruments: PH Pen and Truncheon Nutrient Meter ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 12/20- Week 7 of flower and the end is drawing ever closer for these three Strawberry Gorilla's from FastBuds! Today, I started off this week with a drain/clean of the AirCube reservoir, after which I filled it with 80L of well water and added in the Plagron Nutrients (Green Sensation first, then 'A' & 'B' base nutrients, finally the Royal Rush). After the nutrients were added and the EC checked ( it's 2.0), I ph'd the solution to 5.7 @ 68℉. 12/22- I'm continuing with six feeds per day @ 900+/-ppm's, the HLG 650R is at 100% power 28" above canopy and they are getting 4 hours of additional UV during the middle of the light cycle. Tent temp's are running 68-75℉ at a RH of 40-45% and co2 levels are running 650-900ppm. 12/24- The #1 and #2 plants continue to be the better looking of the bunch, with the #2 being the 'one'. The #3 plant continues her struggle but has a generous coating of trichomes covering her flowers! 12/25- ~🎄MERRY CHRISTMAS!🎄~ 12/26- Seven weeks of flower and only a couple more to go! I'll be starting to flush these ladies in the coming week and they should all be beginning to fade soon! Hope to see you next week! Growers Love!💚 💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow what you love, Love what you grow!💚
Likes
3
Share
So I did a panick check 1 day after week 2 started, due to weather CHANGING AGAIN!!! 😡 I'm using 3 different weather apps, 2 are approved by the govermental weather authorities however it's called in English.. And after each app told me we were about to have a sunny week, the weather changed THE DAY I PUT THE LADIES IN!!! IMAGINE! Climate change is absolutely devestating, the weather doesn't change frequently on a weekly, but rather on a daily/hour basis. This is annoying me to a point where I think I won't do many outdoors again in the future. Probably will try to find another indoor opportunity. North Germany SUCKS. I had to waste so many badass quality, super frosty buds already due to botrytis and/or mold infections. It's just not fun anymore. All the time, work and money I put into this is not really paying off. Indoors is no problemo at all, outdoors whatsoever is not possible in North Germany, unless you don't give a fuck about losing many plants to mold.
Likes
20
Share
Moving right along, each girl is on her own pace. Tent was so crowded I had to remove the heater therefore I bought a bigger tent and will use use this one for drying. Thanks for looking..
Likes
10
Share
Likes
25
Share
Hey everyone 😃. First of all, many thanks to Zamnesia for the support 👏🏼👍. I'll start germinating next week 😋. Until then, I wish you all the best 😊 stay healthy 🙏🏻 and let it grow 🍀
Processing
Likes
7
Share
@vertex8
Follow
Start of week 2 flower today, introducing big bud this week, gave them the full 4ml per litre recommend on the bottles and noted a small mute burn on a few of the leaves but nothing major. Switch to larger reservoir (25l -> 100l) and added bubbler stone as I'll be keeping the feed over 3/4 feeds, this should help keep the food solution oxygenated and fresher. Overall the plant is looking very healthy and seemed to transitioned to bloom food v. nicely.
Likes
69
Share
[DAY 36] - 6/7/2022 - 29°/30° and 60% RH average; - TS 1000 set at 75% = 112 watts and 45cm away - After bending the plant has returned to about 38cm in height; - EC 0.9 / 1 - PH remains fixed at 6.4, no matter how much PH down I put in the solution, it will always return to 6.4 after few hours; ------------------------------------ SCROG TIME AND DEFOLIATION IN SEVERAL TIMES ------------------------------------ - 8 PM - Lights on and scrog net mounted. The scrog net is about 25 cm (10 inches) from the clay and I have tried (at my best) to space the individual branches in the various outer squares of the net. In the next few days I will try to better fill the free squares to try to fill the scrog net completely. - 6 HOURS LATER - I was very rude due my inexperience. Despite that, plant seems already recovered, it is drinking and the branches are already bending to seek the light. [DAY 37] - 7/7/2022 - Just removed some leaves under the canopy who won't get light. I did defoliation in different times due I wanted no stress the plant too much, I hope it was a good idea. [DAY 38] - 8/7/2022 - More defoliation - Bent branches through the net; - Added peppermint oil on the lid to prevent insects from getting into the tent; - Today temperature is cooler, which is why I decided to keep the light off for only an hour. I took the opportunity to give the plant more light after the stress of the last three days to allow it to recover faster. It will go to sleep directly tomorrow at 5 pm until 9 pm, as usual. [DAY 39] - 9/7/2022 - Mounted the carbon filter; - Tried to fix the scrog but I broke a branch; [DAY 40] - 10/7/2022 - Today I tried to lower the net but it is harder than I thought. By now the branches are stuck in the net and I was able to do very little. - I probably made it worse, Before the branches seemed to me better spaced and now I'm afraid of forcing my hand too much, I risk getting even worse. For a couple of days I leave the plant alone, it's not growing so much; - EC 1.1; PH 6.2-6.4; Still drinking about 2 l/day; - TS 1000 set at 75% = 112 watts and 45cm away from the center of the net. The branches on the sides are going up and slowly approaching the lamp, but I don't move it higher because I want a strong light to arrive in the center to allow the lower branches to rise and reach the others. We hope well - I am worried that I've stressed the plant too much, there are numerous branches (even recent ones) with a color tending to red / purple. I hope she recovers well and will try to stress her to a minimum in the next few days. For the first time I had to take care of the plant directly, handling the branches and defoliating. Surely someone more experienced would have done a much better job than mine. Get back soon HULK [DAY 41] - 11/07/2022 - EC 1.3; PH 6.4 - Temp. 28° / RH: 50%; - Today I started raising the EC from 1.1 to 1.3 and the plant reacted well. I used the solution prepared 2 days ago with: demineralized water EC 0 / 0.4 g/L SILICATE / CAL-MAG up to 0.35 / A + B + HYDRO BOOSTER + 1/2 dose of BLOOM STIMULATOR for a total of = EC 1.3. Having to add 2 liters to the DWC, I raised the EC of the made solution from 1.3 to 1.7 with the only addition of CAL-MAG => TOTAL EC IN DWC = 1.3. The plant seems to react well, after 6 hours the water level has dropped and the EC dropped from 1.3 to 1.2. The plant shows to be hungry, especially for CAL-MAG. Over the next few days, I will keep EC levels well monitored and act accordingly. - TS 1000 set at 75% = 112 watts and 45cm away from the center of the net. The branches on the sides still are going up and slowly approaching the lamp. I start to see very few leaves with yellow tips, if it continues like this, I move the lamp 5 centimeters away from the center; - For the moment I stop with the defoliation for 10/15 days, on the advice of @SwissKush [DAY 42] - 12/07/2022 No update. I'm fine, don't worry.
Likes
17
Share
@plant
Follow
Day 15, slightly smaller then I’d like for day 15 but I’m sure they will fill out just fine. 🌱