🌸 Flowering Week 3 — Full Power & Frost Incoming! The girls are in full bloom and loving life right now 💪🌿! After fighting off a bit of PM earlier in flower, everything’s back under control — clean leaves, perfect airflow, and that deep green shine again. The canopy is packed and reaching up strong under the Spider Farmer G3000, which is blasting perfect light across every top 💡. Buds are stacking fast, pistils glowing white, and early trichomes already catching the light ✨. Feed Mix (per L): 🌿 Corex 1 ml/L 🌿 Mira 0.5 ml/L (pH adjust) 🌿 Florex 2 ml/L 🌿 Aurora 1 ml/L 🍬 Bud Candy 2 ml/L 💧 Terpinator 5 ml/gal (~1.3 ml/L) 🌱 Oxyroot 1.5 ml/L 🛡️ Athena IPM (foliar every 2–3 days) 💧 Fed ~15–18 L with 10–20 % runoff ⚗️ PPM 1760 | EC ≈ 3.5+ @ pH 6.0 🌡️ Temps: 26–28 °C (day) / 23 °C (night) 💧 RH: 45–50 %

- Second Week Started with a light dosage of Base A - Base B - Vege - Silica - around 0.5 ML per Liter Kitty decided to be curious and do a taste test while I was changing the reservoir Had a planned trip so I loaded up the water and left her to chill, hopefully my cat didn't do much damage.

Busy week so Only a pic for the end of the week

I decided to place in the tent after 6 weeks. I did LST as well. So it will be half outdoor half indoor. Basically I planted a Auto outside but I can see it ain't gonna be a good yielder. So I should wait till autumn and also that time there is much less sun so I would not have nothing on it. I dont wanna take a risk for nothing so better to boost artificially and have better yield. Day 46: I needed to.cut back she was wilt stressed in the new environment. I removed almost all the fan leaves.

Hey everyone 😀. Another veggie week goes by and they are developing surprisingly well 😃. Both phenotypes look very nice and have a perfect leaf green. Both were topped again. I wish you lots of fun with the update, and stay healthy 🙏🏻🍀 You can buy this Strain at : https://sweetseeds.es/de/sweet-skunk-f1-fast-version/ Type: Sweet Skunk F1 Fast Version ☝️🏼 Genetics: Sweet Skunk Auto (SWS34) X Early Skunk 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

The solo cup Afghani x Mac1 from DNA Junkies is coming to an end. These sticky buds are starting to fade and turning a blueish purple. The smell is strong. Very fruit forward with petrol. Still feeding off the last top dressing.

I'm starting to see some good growth.i did some defoliation so I'm going to back off cutting anymore leaves and will start leave tucking.well she still might get a little hair cut if she gets to bushy.

Hi guys So I think they are laying there roots down properly now. The ladys are all stretching nicely. I do have a freak show the dog bitten and its growing really weired so ill keep that as a side project in the room. I expect alot of new growth this week. Happy growing guys 👌💪💚

Nice big early flowers on this strain.

Fogponic+DWC technique, relativamente resistente tanto a temperaturas como a enfermedades, soporta bastante bien tratamientos agresivos. Buena calidad de flores, aroma sutil pero denso.

Bonjour à tous les padawans et les maîtres jedis Jour42 ma plante entre bien en floraison je pratique sur elle une defolliation pour permettre aux têtes de prendre la lumière La floraison des plantes de cannabis La plante de cannabis passe par différentes étapes de vie avant de parvenir à la récolte. Ces étapes sont : la germination, la pré-croissance, la croissance et la floraison. Pour les autofloraisons il n'est pas nécessaire d'avoir de changer le cycle de lumière elle entre en floraison automatiquement voilà d'où elle tient son nom "d'autofloraison" L'origine de l'auto-floraison vient de la sous-espèce "cannabis sativa ruderalis" , qui à l'origine produit de très faibles niveaux de THC. C'est en croisant cette variété de marijuana avec d'autres qui produisent des niveaux de THC plus élevés qu'à vu le jour ce magnifique compromis que sont les variétés auto-fleurissantes avec des taux de THC très satisfaisants. En parallèle, cela a permis d'améliorer la production de ces variétés, qui initialement étaient exceptionnellement basse. Pour des résultats optimaux, en culture Outdoor (extérieur), je recommande que la germination des graines de marijuanaAuto-flo se fasse entre avril et août. En culture Indoor(intérieur), la photopériode idéale que ce soit pour la croissance comme pour la floraison est de 20h de lumière. N'oubliez pas que ces graines ne sont pas tributaires de la photopériode pour passer en floraison. Il est préférable d'utiliser des pots d'une capacité de 10 à 20L dès le début, étant donné que leur cycle de vie est réduit, les auto-flo n'ent pas besoin de plus de volume pour se développer. Vu sa petite taille (et la discrétion) elle fait l'objet d'un bon choix pour la culture de cannabis sur balcons. La première variété de Lowryder auto-floraison a été créé à partir de cannabis indica sativa croisé avec des génétiques de cannabis sativa rudelaris par la banque de graines de marijuana "The Joint Doctor". Puis vinrent la White Dwarf de "Buddha Seeds", la Roadrunnerde "Dinafem", l' Auto Stoned d' "Autofem", la Speed Devil de "Sweet Seeds" , la Maxi Gom de "Grassomatic", la Flash, la Gnomo de Kannabiaet bien d'autres. Jour42 defolliation (video) Avant toute chose n'oublions pas de bien désinfecter ses outils et bien ce laver les mains. Quesque la defolliation ? LES CULTIVATEURS AMATEURS, PRENEZ GARDE, MAIS NE PRENEZ PAS PEUR La défoliation consiste à retirer les feuilles des plants de cannabis en intérieur afin d'accroître le rendementfinal. Le cultivateur amateur doit faire preuve de vigilance lorsqu'il commence à appliquer cette technique de taille. Malgré le débat sans fin entre ceux qui prônent cette technique et ceux qui la dénigre, il n'y aucune raison pour qu'un amateur ne s'y essaie pas afin de voir si ça lui convient ou non. COMMENT DÉFOLIER Que vous tailliez les feuilles ou les branches des plants de cannabis, il vaut mieux utiliser un sécateur stérile qui est confortable en main. Arracher des feuilles à la main manque de finesse et engendre souvent par accident, l'arrachement des couches d'une tige en plus de la feuille. L'objectif principal de la défoliation est de permettre une meilleure pénétration de la lumière et de promouvoir la production de plus grosses têtes. Les feuilles éventails qui font de l'ombre doivent être retirées. Tailler la tige principale et/ou les pousses secondaires n'est pas de la défoliation. La règle d'or lorsque vous donnez à vos plantes un rafraîchissement est de commencer avec les feuilles nourricières les plus grandes et les plus larges, en taillant du bas vers le haut. Il est important de retirer les feuilles stratégiquement et non pas au hasard. Pensez également qu'il vous faut limiter votre rafraîchissement à approximativement 10 à 20 % des feuilles totales de votre pied. Il est très facile de s'emporter durant la taille et de se retrouver avec des plantes chauves. Un excès de taille de feuilles empêchera la photosynthèse et paralysera vos plants. QUAND FAUT-IL DÉFOLIER Il est assez rare d'appliquer la défoliation comme seule technique pour obtenir un fort rendement. La taille des feuilles est généralement associée à d'autres méthodes de tailles et de palissage pour un meilleur rendement telles que le topping ou étêtage, le FIMming, le LST, le manifolding, le supercropping et le ScrOG. Les cultivateurs utilisant la méthode ScrOG auront besoin de retirer toutes les croissances inférieures ainsi que les feuilles et les tiges se trouvant sous le filet. Les plants de cannabis peuvent être défoliés dès lors qu'ils sont passés de la phase de plantule vers la phase de croissance végétative. Cependant, il est recommandé aux cultivateurs amateurs de laisser aux plantes 1 à 2 semaines de croissance végétative avant de s'attaquer à la défoliation de celles-ci. De plus, certaines variétés sont plus sensibles à la taille que d'autres et de ce fait, seront plus stressées par la taille des feuilles. Surveillez minutieusement le comportement de vos plants après la taille. Une période de convalescence de minimum 3 à 7 jours avant de recommencer la défoliation est fortement recommandée pour éviter trop de stress aux plants. Les cultivateurs peuvent également défolier pendant la phase de floraison, ce qui permettra à l'énergie de la plante d'être concentrée vers la production de têtes tout en limitant l'ombre et l'excès d'humidité. Néanmoins, il est important de ne pas défolier trop tard sous peine de simplement blesser ses plants inutilement. LES AVANTAGES DE LA DÉFOLIATION Évidemment, l'avantage numéro un de la défoliation, c'est l'augmentation du potentiel de rendement de cette technique de taille pour tous types de cannabis allant de la photopériode aux variétés autofloraison. Ce n'est pas un secret que les fleurs qui reçoivent plus de lumières deviennent plus grandes et larges que celles dissimulées dans l'ombre des feuilles. De plus, retirer les feuilles intérieures des plants touffus aide à prévenir toutes menaces de moisissure. Les plants très feuillus avec un feuillage intérieur dense produiront une quantité importante de têtes pop-corn. Dans le pire des cas, les branches de têtes et les têtes qui sont denses succomberont au pourrissement. Si vous observez des gouttes d'eau se former sur la surface des feuilles, il est grand temps de penser à faire de la défoliation. Libérer la zone inférieure et médiane des feuilles est un excellent moyen d'améliorer la circulation de l'air. LES DÉSAVANTAGES DE LA DÉFOLIATION Les plants de cannabis en intérieur bénéficient de la défoliation pour deux raisons. La première est parce qu'ils reçoivent la lumière d'une source stationnaire au-dessus d'eux, et la deuxième est parce que les conditions environnementales sont contrôlées par le cultivateur et non Mère Nature. Les plants d'extérieurs eux, n'y gagnent pas beaucoup, car les cas échéants se vérifient pour eux. Le soleil traverse le ciel, illuminant sur sa route, différentes portions de la plante de son lever à son coucher. Les cultivateurs en extérieur n'ont pas besoin de manipuler les plantes afin qu'elles se développent en adoptant une structure plate puisque le soleil est infiniment plus puissant que n'importe quelle lampe de culture et qui plus est, il est toujours en mouvement. Tailler les feuilles des plants extérieurs les rend également plus vulnérables aux conditions humides et brise leurs barrières naturelles contres les nuisibles. De nombreux cultivateurs d'intérieur peuvent, et malheureusement, c'est souvent le cas, réduire le rendement final à cause d'une défoliation faite au mauvais moment et/ou excessive. Tailler les plantules n'est pas conseillé et engendre souvent des plants nains. Scalper les plants matures est encore pire, et au lieu d'obtenir de longues branches de têtes, vous obtiendrez probablement encore moins de fleurs. De même, tailler des plants malades ou en mauvaise santé à n'importe quelle période de la croissance risque de paralyser la croissance plutôt que d'encourager la formation de fleurs denses. Jour44 Arrosage une fois sur 2 topmax de biobizz Jour46 arrosage avec de l'eau ph6.3 à laquelle j'ajoute 0.8g par litre d'eau de feeding enhancer greenhouse. Jour47 léger arrosage. Jour48 léger arrosage

So the vegging was dragging and there wasn't much new to report so I'm back with a flowering update lol. I'm about 2 weeks I'm flowering. I'll update the details later this week but just wanted to get pics up for now. I'll get some pics without the LED lights too

Gorilla gorilla... my problem child. It has a mind of its own, doesn't want to fit the scrog, seems way behind on her roommates, and is so far a little bit of a disappointment. We will see where she will go, something smokable might come of it. So I defoliated a little, amended with solid nutes: worm castings, bone meal and some extra micro life. Over this, I poured feed, see the liquid feed schedule above. Overal this plant is cramping my stylo a little. Again enforcing my resolution to only grow top genetics, it costs a lot of time and I have only so much space within the legal framework, why bother with inferior strains? We shall see where she takes us... For now, still not impressed much. See you next week!! Hug Bud

🍬

OMG the smells are becoming so intense, from lemon to the sweet caramel mix with chilies and a touch of pine trees, i think i cant put in words what im smelling and were is taking my mind, but i can tel this, what an amazing combination of fragrances that are flying around The tricomes are shouting up as they become fatter and frostier, all cristal clear so far, i think i still have 3 mb 4 more weeks to harvest, lets see 😜 Just calculate my VPD and it’s 0.98 kPa need to increase this up to 1.2 for now s i’m moving my ligth up a bit and see if it works 🙏🤓🙏 Thank you all for following, comment, like and all 🙏 100 likes 😅🙏 🙌🙌🙌🙌🙌🙌🙌🙌 ❤️❤️❤️❤️ Loving this LED Tec 😍 Girls: 1-BlueBerry 2-Alaskan Purple 3-Poyote Gorilla 4-Hindu Kush 5-Whitw Mango 6-Super Glue 7-Badazz Cookies 8-S.A.D. tent -8x8 / 2.4x2.4 but i'm only using 1/2 so 4x4 / 1.2x1.2 Led - Lumatek 465w Compact Pro at 100% All i Grow is medicine for myself, Stay safe, stay tuned and B Happy Peace out D

Big textwall incoming homies: Here Im doin some shit i knew from owning low to middle branded smd grow panels* how is that usually they come with both uv , ir, far red even newer quantum boards supplements itself with diverse chips extending their photosynthetic spectrum or making specific accesory bars / modules yet my purporse is rather focus on UV as this 15w bar (advertised as nominal 9 x 3w powered led) with UV-A 390-400nm spectrum – something that trigger some reaction to the plants with some other color son the flowering phase and trying to establish functional a ratio , as a bit of blue green and yellow have specific purposes instead of providing absurd quantities of red light , as there is some lateral cold bulbs in smaller but necessary ratios (as blue spectrum is still required on flowering , yet the original purpose was to complement mid to low branch development) in this shitty set up bonding with the upper bulbs and their colour temperature schema, every light has it's own schedule as how i suppose is a morning to night as something that cause plant resistance response (kinda noticed something i need to stimulate as i see a bit of fox-tailing but now with the uv-a i propose to build resistance and activate defense mechanisms like resin and of course, plant morphology according to its stage making bulkier , tankier , according to outdoor’s atmosphere i want to replicate as optimal weather as well – i hope this hardship make them more resilient and increase their health points as here i’s a HOT GIRL SUMMER- even indoors it rises my base temperature makes smell notorious, but as is not the usual weed smell make it and advantage in terms of discretion Killer Kush presents slight sweet tones not very prominent, the only herbal smell can be associated to pine undermining the refined coffee-like smell that is the dominant note (this selection of kush lack of lemon notes up to this point i can say it’s earthy with a bit of sour & sweetness) . Alas, as their late flowering phase and feeding schema should make chunky girls ,but the hot girl summer can become really a issue here, days and heat is something to be deal and prevent more light and food that they can chew , and this timing make me not over-do this niggas with excess of light, heat, disbalanced spectrum or extractions. So automatizing it with some timers ( a very good hint to repurpose old shit in your house!) im doing a Schedule that turn off some lights through the course of the day switching the intensity and the spectrum itself , making a sweet morning to afternoon look alike , , making that timer looks really like a basement like a nice dream to my plants, not exposing them to very disfavourable conditions and yet controlling my electric bill peaking , by the same reason , ventilation is also measured as im relying just on ventilators to distribute and disperse heat and also doing the role of intraction / extractors, there are 9 usb fans in various levels of this weed maze <3 . It's noticeable the quick evolution of these plants as there is no other factors to be aware except heat management as plants seem with not negative traces except some burnt leaf from previous weeks so i expect that they should be ready at the end of the month by my a personal mania of ripping shit all at once in order all to have that space at disposition for new projets , i will report stability eventually as they seemed quite rare enough when before putting to flower all, there was one already flowering AND THAT WAS FUCK THIS SHIT AND BECAUSE ITS NO CHEAP BULK TO EXPECT THIS SHIT!** ), and that shit become tears in the rain as that put me in some shit i can’t control or overcome, and just deal with in this strange lst bondage metal succubus nightmare that will be a nightmare to unmount too. Yet, i want the best conditions for her as all plants except her are ok so now the lateral bulbs also switched to give her more light (there is one on the left, right and on the back side, but i think better results with a neutral colour and using t5 led tubes with a water resistant case in each corner of the tent if i try to re do lateral lights ! ) *I still own the panels, in a next future, but not in this run i can use them as i think how i can supplement them and make them a team player as beyonding spectrum shaman shit i know now , and thankful to the chinese kids that made these fucking cheap as hell blessed bulbs,as they made me allow quickly adapt the spectrum on the main setup is 3000-4000k at the same ratio, with the addition of a cold light of 6500k on the idea of middle branching development too , and a small pint of unholy uv doing early 2000s cyberpunk shit with old trash janitor with compulsive hoarding stuff with some big gas leaks attitude niggas . **I do second runs of plants in order reach a better result through practice - but is noticeable the lack of stability on these bastards as i was very happy with previous strains i can say this strain is a big no! , unlike their famous ones, like black Jack or sweet cheese , the former ones fast version are way more stable and they didn’t presented me autoflowering phenos in the batch … i don’t hate autos, but i hate to mix them with feminized on the same run, its like having a hermaphrodite indoors for me. 😫😫😫

Nov.5 -we placed these girls in a paper towel and paper towel in ziplock Nov.6 - Once girls seeds showed tap root we placed the tap root down into the rockwool Nov.9 - Started DWC, put a small layer of pellets at the bottom then placed in rockwool then covered rockwool with pellets Nov.10 - Took a light away and put it in our small tent, these guys only have the one light now

Northern Lights Autoflowers: Week 10 Grow Diary Repo The Northern Lights autoflowers, Charlotte and Makayla, have reached Week 10 on the deck, and their differing growth strategies are on full display. They are handling the outdoor elements well as storm systems roll across the plains, benefiting from the automated garden manifold design that keeps their irrigation consistent. Here is the status report for the garden. Individual Plant Breakdown Charlotte (Tall / Christmas-Tree Profile) Morphology & Height: True to her established genetics, Charlotte is standing tall and displaying a classic, vertical "Christmas tree" structure. Her central cola has reached approximately 14 inches in height from the soil line. Development Stage: Charlotte is well into her flowering phase. A well-defined vertical stack of pre-flowers and bud sites is forming along the main stem, with prominent white pistils developing. * **Canopy & Support**: Unlike her sister, her branches grow more upright. She is supported by a single bamboo stake bearing a blue flag marked with a "C". Makayla (Low-Profile / Bushy LST Profile) Morphology & Training: Makayla continues to display a beautifully managed, low-profile, and wide structure. This is the result of 100% low-stress training (LST). Her main stem and primary branches are pinned down horizontally using training wires anchored across the soil. Development Stage: Because her canopy has been kept flat and spread wide, her energy is evenly distributed. Multiple secondary tops have broken through to form an even, bushy carpet of vegetative growth with early flower sites just beginning to show across the node points. Canopy & Support**: She is thriving in her fabric pot, marked by a blue flag with an "M". Garden Notes & Observations Containers: Heavy-duty black fabric smart pots are being used. Irrigation**: Green coiled garden hose sections are secured inside the rims of both pots, acting as an automated irrigation manifold distributing water evenly across the mulch and soil. Companion Planting: Small potted marigolds are situated on the deck next to the fabric bags, continuing their job as the pest defense security team. Foliage Health: Both plants exhibit a rich green hue, though minor environmental weathering (small superficial spots or dust from the plains) is visible on some of the larger fan leaves. Overall vigor remains strong. Summary Comparison Side-by-side, these two sisters show how much structural impact training can have on identical genetics. Makayla is a flat, dense solar panel optimized for horizontal space, while Charlotte is maximizing vertical light absorption with her tall central cola. They are a fantastic case study for Week 10!

Had to switch the ladies to different lights for reasons undisclosed. They handled it very well and are growing vigorously. Lst was easy on them due to the topping a couple weeks ago. First signs of flower are showing as well.

Getting better day by day, we did try to correct a small calmag issue which was observed last week, but not really a big deal as we are already started to provide bloom nutrients, at the moment the girls are doing great under the TS1000 😃🤗