I did run into a few complications that hampered the grow.The 2 P's came into play on this one. PPM and PH I also had an issue with the pump art first but that was corrected quickly. I will grow this strain again in the future😎

I have no fckin idea what is goin on with that one Alaskan purp.I'm thinkn it might be sumthin genetic.Wtf seedsman lol... O well we will see I guess. Everything lookn good and happy to see them stretchn....lil disappointed wit the size but I got a late start so what can ya do...still should b a nice harvest...

ALL THESE PHOTOPERIODS WILL GO IN THE 8X8 TENT ONCE THE AUTOFLOWERS ARE CHOPPED AND I WILL SWITCH THE LIGHT TO FLOWER THEM IN THERE FOR MORE ROOM FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

08.08.: Blütetag 1 Heute habe ich nur noch die Triebe unter das Netz gebogen, damit alle ungefähr auf einer Höhe sind. Da der Platz nun sehr gut durch beide Pflanzen ausgefüllt ist, ist der Moment gekommen die Blüte einzuleiten. Die PBB hat schon so viele Stempel, sodass es so aussieht, als wäre sie schon in der Blüte. Daher denke ich, dass die PBB nicht lange für die Blüte brauchen wird. Wir werden es sehen. 12.08.: Blütetag 5 In den letzten Tagen seit Umstellen des Lichtzyklus und Einleiten der Blüte, sind beide Pflanzen ein gutes Stück über das Netz hinaus gewachsen. Aktuell gibt es nicht viel zutun. Leider sind einige Thripse auf den Pflanzen, aber ich habe bereits Raubmilben ausgebracht. Hoffentlich können sie die Thripse etwas in Schach halten. Außerdem habe ich die Bewässerungsdauer auf 20min, wenn das Licht angeht und nach 6h Beleuchtungsdauer, gestellt. Falls das nicht ausreichen sollte kann ich immer noch händisch nachgießen oder die Bewässerung anpassen. Den Beleuchtungsrhythmus habe ich so gewählt, dass abends um 10 Uhr das Licht angeht und morgens um 10 Uhr aus, damit die Lampe nicht während den heißen Sonnenstunden brennt. 13.08.: Blütetag 6 Die Stretchphase ist bei beiden Pflanzen noch voll im Gange. Aktuell wachsen sie durchschnittlich ca. 6cm am Tag. Ich bin gespannt, bei welcher Höhe sie ihren Stretch beenden. Das nächste Update gibts dann in Blütewoche 2.

On to week seven of flower. She is fattening up nicely. She is starting to showing some signs of defiancey. She has some heat stress going on from being to close to the light. LED's still put off heat. Trichromes are still overwellmingley clear. Hopfully she will be done in 14 days or so...

*****Week 15 growth – March 13 to 19, 2021 – Week 6 flower ****** Feeding has ended this week and we are in flush mode now. The girls have just started to slow down their drinking and pistols are changing colour, buds are swelling, they are getting ready to finish. Added the UV and IR light bars in this week. Started the week with just one bar and then both in place by end of week. Each bar has 10 x 730nm, 10 x 395nm, 6 x 660nm pulling 30 watts each. Trichome enhancers!! Working with the new light this run I have certainly pushed them with more light intensity than they should have received, broke 1100 PAR for a bit. This has also started to cause some foxtails to begin rather than staying compact and swelling the buds. Know for next time……always changes to make 😊 Little more detail….. Mar 13/21, Day 36 - Feed day with full line of Innovating Plant Products but at ¾ strength. - Keeping up the feeding but thinking about nitrogen levels and working on reducing. - feeding with grow – 0.5, micro – 1.5, bloom – 2.5, ult B – 0.5, carbs – 0.75, B Storm – 2, S Storm – 3, Terp – 3, Jet Fuel – 1.5, Rezin 1 - 1300ppm and 6.2pH - 4L - Added in the first UV bar today Mar 14/21, Day 37 - Seeing lots of swelling these days from the girls. - Microbe feeding today…….possibly last round of microbes. - Plain tap water with Recharge @ ½ tsp/gal and Natures Candy @ 1.5ml - 400ppm and 6.1pH - 3L all around today…..very little run off. Mar 15/21, Day 38 - Another feed day today. Last week of feed so pushing them a little more. No Grow added! Last couple of feeds with CalMag as well, seeing some magnesium issues so giving last dose. - feeding with micro – 1.5, bloom – 2.5, ult B – 0.5, carbs – 1, B Storm – 2.5, S Storm – 3, Terp – 3, Jet Fuel – 1.5, MagNifiCal – 1.5ml - 1175ppm and 6.0pH - 4L - Mar 16/21, Day 39 - Just giving the basic building blocks at this stage. Most of the supplements not added this feeding. - feeding with Grow – 0.5, micro – 1.5, bloom – 2, carbs – 1, Rezin – 1.5ml, MagNifiCal – 0.5ml - 875ppm and 6.0pH - 4L Mar 17/21, Day 40 - Last Feed Day……calling it at day 40 this run!!!!! - 4L of feed water left from yesterday so added in 12L of RO water to keep the ppm down. - Left over plus Rezin @ 2ml, Overdrive @ 2ml (its hard to let go of your routines…I have been using Overdrive for so long……it feels wrong to not be using it this run….snuck in a couple ml😊) - 485ppm and 6.0pH - 4L - Light power pushed back up to 525 watts……..keeping the intensity up to hit the lower bud sites….will see what happens to the uppers. Mar 18/21, Day 41 - Starting flush but not hitting the pots with 12 gallons of water each type of flush! Will just drop the ppm down to nothing and use RO water……planning on having close to 3 weeks to flush….second guessing that I really have that long though so may actually end up adding a flushing agent to the girls…..decide in the next 4 days so can leave plain water time if I do. - Watering with Enzymes @ 2ml…….clean up the roots and help them get more of the ppm out of the media. - 100ppm and 5.9pH……..missed the pH but not adding both up and down, ran with this. - 4L - Light power pulled back down 480 watts Mar 19/21, Day 42 - Dry out day today. Will be letting the pots get dryer now before adding more moisture. - Leaving them for today though. Give flushing agent in next 2 days if going to. - Work down the light intensity more in next couple of days as well. - UV lights going now for 3 hours per day on both fixtures at the middle of the light schedule.

Semente original de prensado da região com pai desconhecido. Inicio da 5 semana de floração.

This week went really great! Plants are looking super healthy today at day 22 from seed!! Today they got a dose of just pure water phd at 6.5 ! Temperature an humidity has been staying pretty stable everyday, staying around 70-75 degrees and 58-61 % humidity!! Can’t wait to see what these girls do this week ! Hope you all enjoy , an had a great safe weekend! Peace love an positive vibes to y’all Cheers 😶‍🌫️💨💨💨If there’s any questions, please ask me 🙏🏻

Now nearly court up so this is around 3_4 weeks flower just finishing stretch here

There's a port on a western bay And it serves a hundred ships a day Lonely sailors pass the time away And talk about their homes And there's a girl in this harbor town And she works layin' whiskey down They say, @PeakyPlanters, fetch another round She serves them whiskey and wine

Put a lot of love into this grow. She grew for 4 months from seeds to harvest. About 5 weeks and 56 days of flower. Overall great strain to grow and great site @growdiaries for giving the platform and help from other growers. I’ve learned so much about growing and especially about this strain.

My apologies have been away for a bit but the pics are from the last 2 1/2 weeks! Other plant that was the same age turned out to be a male which its unfortunate because it was an accidental cross lol anyway she’s been growing vigourously ever since I made the switch..3 weeks almost complete and she’s a beast! Can’t wait to see the buds form, will try to post more frequently since my scheduled has cleared up some. Thanks for stopping by! Good luck with your own projects!...oh n it may look like I use a lot of nutes but those don’t get used every watering, I often forget to mix or purposely don’t mix one of the supplements but ALWAYS add the 3 base:gro, bloom and micro.

Just feeding and waiting for them to ripen up. They have been very easy to grow despite being kept in small pots.

Some LSD was done. Pinhas is looking good, giving a nice grow this week.

Esta semana le he hecho trasplante a maceta de 1L y de resto todo igual