C1 60 C2 63 C3 92 C4 69 C5 84 Total 368g

Growing great. been adding calmag to the mix and she bounced back. Still a little yellow but the buds are growing nicely. Great trichome production To the touch it smells SO much like blueberries Im blown away and theres still more maturing to do! Excited to see how much more she fills out.

Die letzte Woche ist angekommen jetzt heißt es nochmal kräftig spühlen und dann ist Ernte. Die Farben einfach wunderbar und der Duft ist atemberaubend.

Topped again, probably for the final time. Just going to LST the new growth from here on.

Flowering day 34 since time change to 12/12 h. Hey guys :-) The buds have developed incredibly nicely this week. The smell is getting more and more extreme :-) . The growth has slowly stopped as the full energy goes into the production of the buds. Watering was done twice this week, each time with 1.2 l (nutrients see table above) They were individually inspected and checked for their health. Osmosis water for the coming week was refilled in a 100 l tank 👍. Have fun reading the diary and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : Clearwater Seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany

Start of Week 12 😉 Day 86 autumn comes too fast 😵😲😪 Day 88 time is running out 😲😯😧 Day 89 the weather turns to epic fail 💀💀💀 Day 90 the sun comes back again 😍👌 oh lord

Week 8 off flowering Cookies Gelato On to a next week it's getting closer to the end Growmies 😱😱😱 . But i am ready for it 💪🏻 Tomorrow First day update cheers 🤘🏻🇳🇱🤘🏻 Day 49 Dence and tall that's what the cookies gelato is getting it's definitely a resin producer and i love the smell coming of here 😋😋😋 Day 50 Going on steady pase letting them dry out a bit for day more had feeling over water them to much last couple waterings there's still a lot growing tho that need some bulking up but i have say it before it's my first ever grow and already amazed what i can grow by my self i am extremely curious about the end result 🤞🏻 Day 51 Nothing to tell but good vibes for the cookies gelato i probably gone take these up to day 75 ish i want this strain developing for here full potential Also gave them 1.5L nutrition pH 6.6 Day 52 Nothing to say about today there going fine gave them more water 1L And keeping the humidity in check That's all folks Day 53 Good day Growmies what a wonderful day it has bin for the plants and for my self very happy with the results i get under my lovely marshydro TS-1000 Is too notch 👌🏻 have great weekend folks Day 54 Leaving them alone today easy Sunday Also want to thank everybody for the comments likes etc you know who you all are 👍🏻😍👍🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Mars Hydro tent handy info Lock All Light Inside: MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. Durability Grow Tent :Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. Easy Observation of your Plants: Special peek👀 window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. Removable Tray Keep Clean: The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof cleaning easy. Good Ventilation&Fast Assembly: Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter.

Waiting for first signs of life … While we are, I thought I’d give you a short explanation on the software’s graphics in case you did not follow my first diary. The one to the upper left, as its headline says, is the temperature graph. Most important line is the red one, showing the leaf temperature measured with an infrared temperature sensor. As there are no leaves yet, it is pointed towards one of the pot’s wall at soil level. Air temperature from a sensor that usually hangs around somewhere around top level is violet, and the grey line is the outside temperature close to the tent, helping the software to determine if a main blower action will effectively lower temperature. As I learned from the first grow a plant day that corresponds to the natural day can cause enormous gaps both to temperature and humidity, I inverted the plant day now, starting their night at 11 a.m. So after the first day temperature will only vary around 1.5 °C, which is of course due to the low light intensity too. Humidity graph on the upper right is quite crowded. Main line is the blue one, tent air humidity, which on this first day was between excellent 65 – 70% most of the time. For the moment humidifier is electrically disabled. There is quite some excess humidity on the tent floor and no reason to push this any further. Outside air humidity is grey again and taken from the same outside sensor that reports outside temperature. The soil humidity sensors are simple analogue capacitive sensors which have their flaws. I am interpolating their measurements to have a somewhat smoother reading, but as you can see from the turquoise humidifier reservoir reading (in legend named as plant soil hum 1), they can get confused when humidity is very high and start to report random numbers for some time. The most important graph for all growing stages is the lower left one, where the pink line meaning plant VPD should be inside the green optimum range for somewhat perfect conditions. This cannot be attained all of the time – dehumidifying isn’t as easy as humidifying –, but software tries its best to do so. Outside VPD is grey again. The last graph is more for amusement than anything else. The light intensity sensor is hard to position correctly, and everything you see about illumination and DLI (orange and green, plus grey for the accumulated 24 h DLI) should be taken with some spoonful of salt. Any resemblance to real world professional instrument readings can be considered purely coincidental. The violet line is the CO2 reading from such a sensor, and you can see that its tiny peaks correspond to even tinier black peaks at the bottom of the graph, reading TVOC values which in this case, once they will be more than possible measurement irregularities, can be interpreted as smell. ------- End of week 1: All seeds germinated. I wasn’t at home most of the time, and it turned out using the humidity sensor to monitor the humidifier’s tank wasn’t good for the stability of the system. Arduino crashed, so there are no pictures yet and no graphs to show. I have the feeling light was a bit low as the seedlings grew a bit tall, but with lights now up to 20% I guess this problem is fixed. More tomorrow when I have some more data to share. Even more end of week 1 (I extended this week to 9 days as I cannot tell when the seedlings started to show): Lights are at 40%, meaning 40 W in total. No reason to give them new water until next week. As some flies showed up from the BioBizz soil, I added 2 yellow cards. So far, everything in normal ranges. I’ll switch the control to grow phase soon which will raise the VPD slightly by 0.5 kPa. It’s interesting to see the CO2 level started to climb by 50% during their last night and has not come down to baseline afterwards. I restarted the app to check if the sensor had lost its calibration, but it still sits at around 660 ppm now.

Coming up happy and rather quick!

340g dry weight (5% trim still in it) Heavy diesel, little berry flavors, no lemon as advertised Earthy flavor with a skunky hint Best for chilling / bedtime Would grow again but make sure that the supplier is right! Dark Horse genetics only - seen other plants with said ,same genetics‘ and those were way different /less terpenes

Started LST on day 21, and lolipopped her to be mainlined to 5 nodes! Grew very nicely! Tried watering her with just plain water one time mid flower... She likes food, to say the least ;)

Hello growers,💚 beautiful strong plant .No problematic flower.🍰🍰🍰 naprosto úžasná vůně květů 💨💨💚

Bonjour à tous, ces derniers jours ce sont bien passé pour mes petit bébés elles grandissent doucement mais sûrement.C’est la première fois que je travail avec cette gamme de produits (je vous est mis des photos des produits 😉) pour l’instant j’en suis satisfait après, il faut voir le résultat final ce qui est moins facile 😂. Mes petit bébés commence leurs 5ème semaine (je me suis trompé d’une semaine 😕 désolé 😉) trop pressé!!! 😂 de mettre de nouvelles photos 😜. Je vous dis à là semaine prochaine vivement 😉 bonne journée à tous. Je vous remercie 😉.

Trichome Takeover! ❄️🍰 : The Cake is Frosting Up! Welcome to Week 8! This Wedding Cake Auto is really living up to her name now. The "stretch" from the previous weeks has finally settled, and she is focusing all her energy on stacking those buds. The frost is becoming much more apparent trichomes are starting to crawl onto the sugar leaves, and the scent is getting deeper and more doughy every time I open the tent. I’m really impressed with how she handled the topping and LST earlier on; the canopy is nice and even, and every bud site is getting a prime spot under the Agyrochy LED. Feeding & Environment: Watering: She’s getting thirsty! I’ve maintained a steady watering schedule, making sure to keep the pH around 5.5-6.0 as she bulks up. Nutrients: Continuing with the mix. She seems to be loving the current PPM levels (around 800), so I’m sticking to the plan without pushing too hard. Zamnesia really knocked it out of the park with these genetics. Low effort, high reward so far! Can't wait to see how much more she swells in the coming days.

Great 50/50 hybrid, I love smoking this bud, would consider Unicorn poop a miracle strain! it's effects are potent slightly heavy but very functional, clear, creative & very flavorful Pheno 1 terp profile is a creamy gas with phunky rancid fruitypine kush tones, fruity coffee tones, Doughy Candy GMO Pheno 2 terp profile is pineapple grape candy, zesty diesel terps Dried for 15 days in dark dry tent at 58-63RH 60-67F | Dry hand trim | Pheno 1 was Cured in Grove bag Pheno 2 in jar

Been a tough week as my ph pen failed so had signs of defiantly But that’s now corrected so hope it didn’t set them all back too much But this girl really has rippened up fast so will start too flush her this week coming

I had to harvest the biggest plant, i forgot it went into flowering earlier so the trichomes were already dying, still found some spider mites on that plant i hope they don’t eat away my harvest.. haha. Got a nice 135g wet bud of that plant, since all the trouble i had i think it still came out great!