Check the winners The Grow Awards 2026 🏆
Likes
Comments
Share
Processing
Likes
23
Share
@HanzGrowz
Follow
Amazing progress across the board in the tent the last week. Development has been positive for The New and Black Dog, Bubba has swollen up bud wise, and it’s still another week away or so (flowering is supposed to be 50-55 and we’re at 50 today). Chemdawg smell is getting stronger but not too aggressive, and it’s fate king nicely on most colas. Even at the bottom of the plant the buds look nice. It’s an amazing strain, can’t wait to smoke it.
Likes
4
Share
@MistaOC
Follow
18.04. F8 Flower Day 8 – Defoliation & Lollipopping Today a full cleanup and structural adjustment was carried out. Plants were defoliated and lollipopped to remove lower growth and improve airflow and light penetration. At the same time, branches were trained further to achieve a flat and even canopy. The full 1.2 × 1.2 area is now nearly filled, which should allow for optimal light usage going forward. Timing feels right, as the stretch is still ongoing but structure is now set for the flowering phase. From here on, the focus will be on maintaining the canopy and monitoring development as bud formation progresses.
Likes
8
Share
@pzwags420
Follow
Applied 1/3 gal Nutrients by hand on day 1 of week 5. I defoliated leaves and shoots on the second node to build my manifold. I will be keeping the 1st and 3rd nodes on each main creating 8 colas with less topping then traditional Main-Lining. I preformed the 2nd topping on day 2 of week 5( the plants now have 8 shoots each and I will eventually be applying LST to the new 8 shoots).I haven't had any more issues with the Blumats but I am still dialing them in...I'm starting to see the pros of having a digital irrigation system vs my analog, but this is what I have available at the moment plus it's nice not having another wire to plug in 😉 Applied 1/3 gal Nutrients by hand on day 3 of week 5. On day 4 of week 5 I defoliated large fan leaves on well developed shoots on node 1 of mains(will do the same to node 3 of mains when those shoots grow out from the last topping). Applied 1/3 gal Nutrients by hand on day 5 of week 5. It's day 6 week 5 and I'm starting to see some possible issues with over watering and over fertilizing. One of my plants leaves started to claw slightly no burnt tips but I can tell she is slightly unhappy. I will lower the nutrients while making sure when I fertilize I get more runoff. I also dialed back my Blumats so that they water less(I'm starting to see a little green algae forming on the surface of the Coco this tells me it is staying too moist).
Likes
7
Share
Hiiigh friends 🙌 Welcome to week 8. 😍 Due to too much unwanted stress, flowering is delayed. The big lady was unable to withstand the training. Her neck is broken. But she is far from giving up and will fight to the end.. 😊 See you next week. 👋 Arturo for KannaKullektiv 🙏
Likes
98
Share
I love growing its a big passion of mine , and the fact that GD exists makes everything so much better, one can interact with others and enjoy and learn from each others. Thank you all growers love and keep them green <3 <3 <3
Likes
6
Share
@mck47
Follow
harvested some of the top buds due to much humidity and risk of budrot 6 days ago. The rest I harvested 2 days ago. Will edit the next weeks when it all dried up.
Likes
18
Share
Moving right along! Seems to be very happy. Fast flower is pretty accurate as it is faster than my other photos! Can’t wait ✌️🏻💚
Likes
13
Share
@Statman
Follow
Ho appena installato la MARS HIDRO TSW 2000 modello 2020 ( con il dimmer della luce che si può modificare a proprio piacimento ) Ora come ora l’ho impostato sui 70-75 centimetri e % dimmer luce di 35% Aiutatemi a capire come impostare al meglio la % perché su internet non riesco a trovare le % di luce e distanza lampada adatte per non fare ingiallire le 🌱 Ho corretto tutto il PH di: piante 6.5 Acqua per innaffiare 6.5 Umidificatore 6.5 Ho appena applicato ad una pianta il LST... l’ho fatto bene? Accetto consigli ragazzi 😎
Processing
Likes
8
Share
Weird growth on the leaves of one of my plants. Looks healthy otherwise. White widow is beginning to pop out for life.
Likes
9
Share
SOME SEEDS ARE STARTING TO POP OPEN AFTER 1.5 DAYS SO I WILL PROBABLY BE PUTTING MOST OF THEM IN THE SOIL ON APRIL 23RD👍 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
6
Share
El ciclo de la planta ha sido muy bueno, los fenotipos de Sweed Seeds son bastante fertes en cuanto a enfermedades, personalmente sientre uso mico vita (top crop) mezclado en seco con el sustrato y siempre me a funcionado realmente bien 👍 Los cogollos han ido cogiendo fuerza y tricomas sin parar, respondiendo al entrenamiento LST sin ningun problema 💪 BUENOS HUMOS 🔥
Likes
3
Share
Guten Morgen Freunde, wir befinden uns am Ende der Woche 3. Morgen beginnt Woche 4, die Pflanzen entwickeln sich prächtig und reagieren top auf mein LST Training. Ich gieße ca alle 4-5 Tage mit 650ml wasser, den EC Wert passe ich auf ca 950ms/cm an und den PH Wert regle ich auf ca 6.0-6.3. Die lichtleistung liegt bei 450umol/m²/s. Ich wünsche allen einen schönen Sonntag und bis nächste Woche :D
Likes
14
Share
She is born in 5 days and promise very good like her name, for the classic stoners a name is a warranty. We hope to do well. Dale and Saul will be proud of our job.
Likes
3
Share
Questa settimana la pianta a iniziato a tirar fuori i nuovi rami, e abbiamo iniziato con i fertilizzanti 1 ml per parte grow bloom micro della adv nutrients
Likes
12
Share
🌿😎. Day 50 01 Mar, Tues PM ♥️💛💚 Each got 2700 mL 1 CalMag, 0.5 Grow Big 1 Tiger Bloom, 1.5 Big Bloom Day 53 05 Mar, Thurs AM♥️💛💚 Each got 2700 mL Only put in Recharge. Day 59 07 Mar, Sat PM♥️💛💚 Each got 280 mL 1.5 CalMag, 0.5 Grow Big 1.5 Tiger Bloom, 1.2 Big Bloom Trying to water every 1.5 days at peak flower. Everything is steady, heavy indica plants. Buds look like they might get phhhaaaat!
Likes
48
Share
i accidently bought some unbuffered coco and mixed it with my ussual earth, had major calmag problems in mid-flower but i´m still pleased with the results...also had a little trouble with mold at the end due to bad weather and high humidity in the final weeks of the grow, had to remove a few buds and harvest early @ day 55 of flower....but there's still alot of great looking buds left for me to enjoy and all look mostly done... Just harvested and hung them upside down, currently drying them at constant 19.5-20.5°C and 50-60% RH..will update as soon as they are dry
Likes
4
Share